DigitalInfinity/ESP32-PaxCounter
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

m5core.h m4fire.h bugfix lora pins

Browse Source
This commit is contained in:
Klaus K Wilting 2020-03-14 18:46:39 +01:00
parent 25eaeab2b5
commit a85f84ede4
2 changed files with 7 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
src/hal/m5core.h
View File

@ -2,26 +2,21 @@
// upload_speed 921600
// board m5stack-core-esp32
// EXPERIMENTAL VERSION - NOT TESTED ON M5 HARDWARE YET
#ifndef _M5CORE_H
#define _M5CORE_H
#include <stdint.h>
#define HAS_LORA 1 // comment out if device shall not send data via LoRa or has no M5 RA01 LoRa module
// Pins for LORA chip SPI interface, reset line and interrupt lines
#define LORA_SCK SCK
#define LORA_CS SS
#define LORA_MISO MISO
#define LORA_MOSI MOSI
#define LORA_RST GPIO_NUM_36
#define LORA_IRQ GPIO_NUM_26
#define LORA_IO1 GPIO_NUM_34 // must be externally wired on PCB!
#define LORA_RST GPIO_NUM_26
#define LORA_IRQ GPIO_NUM_36
#define LORA_IO1 GPIO_NUM_34 // must be wired by you on PCB!
#define LORA_IO2 LMIC_UNUSED_PIN
// enable only if you want to store a local paxcount table on the device
#define HAS_SDCARD 1 // this board has an SD-card-reader/writer
// Pins for SD-card

13
src/hal/m5fire.h
View File

@ -2,29 +2,24 @@
// upload_speed 921600
// board m5stack-fire
// EXPERIMENTAL VERSION - NOT TESTED ON M5 HARDWARE YET
#ifndef _M5FIRE_H
#define _M5FIRE_H
#include <stdint.h>
// #define HAS_LORA 1 // comment out if device shall not send data via LoRa or has no M5 RA01 LoRa module
// Pins for LORA chip SPI interface, reset line and interrupt lines
#define HAS_LORA 1 // comment out if device shall not send data via LoRa or has no M5 RA01 LoRa module
#define LORA_SCK SCK
#define LORA_CS SS
#define LORA_MISO MISO
#define LORA_MOSI MOSI
#define LORA_RST GPIO_NUM_36
#define LORA_IRQ GPIO_NUM_26
#define LORA_IO1 GPIO_NUM_34 // must be externally wired on PCB!
#define LORA_RST GPIO_NUM_26
#define LORA_IRQ GPIO_NUM_36
#define LORA_IO1 GPIO_NUM_34 // must be wired by you on PCB!
#define LORA_IO2 LMIC_UNUSED_PIN
// enable only if you want to store a local paxcount table on the device
#define HAS_SDCARD 1 // this board has an SD-card-reader/writer
// Pins for SD-card
#define SDCARD_CS GPIO_NUM_4
#define SDCARD_MOSI MOSI
#define SDCARD_MISO MISO