From 2622c0d0dede55f2b214c6f0c4f44069c41ffad0 Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Wed, 25 Sep 2019 15:00:52 +0200 Subject: [PATCH 01/26] sanitize compiler warning power.cpp --- src/power.cpp | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/src/power.cpp b/src/power.cpp index 83748286..6b7f1f5e 100644 --- a/src/power.cpp +++ b/src/power.cpp @@ -207,15 +207,17 @@ uint16_t read_voltage() { #ifdef BAT_MEASURE_ADC // multisample ADC uint32_t adc_reading = 0; +#ifndef BAT_MEASURE_ADC_UNIT // ADC1 + for (int i = 0; i < NO_OF_SAMPLES; i++) { + adc_reading += adc1_get_raw(adc_channel); + } +#else // ADC2 int adc_buf = 0; for (int i = 0; i < NO_OF_SAMPLES; i++) { -#ifndef BAT_MEASURE_ADC_UNIT // ADC1 - adc_reading += adc1_get_raw(adc_channel); -#else // ADC2 ESP_ERROR_CHECK(adc2_get_raw(adc_channel, ADC_WIDTH_BIT_12, &adc_buf)); adc_reading += adc_buf; -#endif } +#endif adc_reading /= NO_OF_SAMPLES; // Convert ADC reading to voltage in mV voltage = esp_adc_cal_raw_to_voltage(adc_reading, adc_characs); From cb67e368ba63a0200bbc46f71a98ec8fb78a19a2 Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Fri, 27 Sep 2019 12:41:14 +0200 Subject: [PATCH 02/26] add countermode to paxcounter.conf --- src/configmanager.cpp | 2 +- src/paxcounter.conf | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/src/configmanager.cpp b/src/configmanager.cpp index 5b235f70..c629d617 100644 --- a/src/configmanager.cpp +++ b/src/configmanager.cpp @@ -20,7 +20,7 @@ void defaultConfig() { cfg.adrmode = 1; // 0=disabled, 1=enabled cfg.screensaver = 0; // 0=disabled, 1=enabled cfg.screenon = 1; // 0=disabled, 1=enabled - cfg.countermode = 0; // 0=cyclic, 1=cumulative, 2=cyclic confirmed + cfg.countermode = COUNTERMODE; // 0=cyclic, 1=cumulative, 2=cyclic confirmed cfg.rssilimit = 0; // threshold for rssilimiter, negative value! cfg.sendcycle = SENDCYCLE; // payload send cycle [seconds/2] cfg.wifichancycle = diff --git a/src/paxcounter.conf b/src/paxcounter.conf index 40852f59..38feccc3 100644 --- a/src/paxcounter.conf +++ b/src/paxcounter.conf @@ -14,6 +14,7 @@ // Payload send cycle and encoding #define SENDCYCLE 30 // payload send cycle [seconds/2], 0 .. 255 #define PAYLOAD_ENCODER 2 // payload encoder: 1=Plain, 2=Packed, 3=Cayenne LPP dynamic, 4=Cayenne LPP packed +#define COUNTERMODE 0 // 0=cyclic, 1=cumulative, 2=cyclic confirmed // Set this to include BLE counting and vendor filter functions, or to switch off WIFI counting #define VENDORFILTER 1 // set to 0 if you want to count things, not people From 0f9e2dfd63ed7c9eea82c28b0c3bdb35fb224d02 Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Fri, 27 Sep 2019 12:47:00 +0200 Subject: [PATCH 03/26] new oled driver (experimental) --- include/display.h | 5 +- include/ota.h | 7 +- platformio.ini | 5 +- src/display.cpp | 257 +++++++++++++++++--------------------- src/hal/ecopower.h | 4 +- src/hal/generic.h | 2 +- src/hal/heltec.h | 2 +- src/hal/heltecv2.h | 2 +- src/hal/lolin32litelora.h | 4 +- src/hal/lolin32lora.h | 4 +- src/hal/octopus32.h | 4 +- src/hal/ttgobeam.h | 4 +- src/hal/ttgobeam10.h | 4 +- src/hal/ttgofox.h | 4 +- src/hal/ttgov1.h | 2 +- src/hal/ttgov2.h | 4 +- src/hal/ttgov21new.h | 4 +- src/hal/ttgov21old.h | 4 +- src/hal/wemos32oled.h | 4 +- src/ota.cpp | 84 ++++++------- src/paxcounter.conf | 2 +- 21 files changed, 190 insertions(+), 222 deletions(-) diff --git a/include/display.h b/include/display.h index bbaa568c..90ea3f38 100644 --- a/include/display.h +++ b/include/display.h @@ -1,16 +1,13 @@ #ifndef _DISPLAY_H #define _DISPLAY_H -#include #include "cyclic.h" extern uint8_t DisplayIsOn; -extern HAS_DISPLAY u8x8; - void init_display(const char *Productname, const char *Version); void refreshTheDisplay(bool nextPage = false); void draw_page(time_t t, uint8_t page); -void DisplayKey(const uint8_t *key, uint8_t len, bool lsb); +void dp_printf(int x, int y, int font, int inv, const char *format, ...); #endif \ No newline at end of file diff --git a/include/ota.h b/include/ota.h index 59bf876c..cec28750 100644 --- a/include/ota.h +++ b/include/ota.h @@ -4,6 +4,7 @@ #ifdef USE_OTA #include "globals.h" +#include #include #include #include @@ -14,11 +15,9 @@ int do_ota_update(); void start_ota_update(); int version_compare(const String v1, const String v2); -void display(const uint8_t row, const std::string status, - const std::string msg); -#ifdef HAS_DISPLAY +void ota_display(const uint8_t row, const std::string status, + const std::string msg); void show_progress(unsigned long current, unsigned long size); -#endif #endif // USE_OTA diff --git a/platformio.ini b/platformio.ini index adfcc3e1..ded8baf9 100644 --- a/platformio.ini +++ b/platformio.ini @@ -43,7 +43,7 @@ description = Paxcounter is a device for metering passenger flows in realtime. I [common] ; for release_version use max. 10 chars total, use any decimal format like "a.b.c" -release_version = 1.8.34 +release_version = 1.8.4 ; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running! ; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose debug_level = 3 @@ -57,7 +57,8 @@ upload_speed = 115200 lib_deps_lora = MCCI LoRaWAN LMIC library@>=3.0.99 lib_deps_display = - U8g2@>=2.26.13 + ss_oled@>=2.1.1 + BitBang_I2C@>=1.2.0 lib_deps_matrix_display = https://github.com/Seeed-Studio/Ultrathin_LED_Matrix.git lib_deps_rgbled = diff --git a/src/display.cpp b/src/display.cpp index b89f551d..8db7eefa 100644 --- a/src/display.cpp +++ b/src/display.cpp @@ -26,11 +26,11 @@ line 7: y = LMIC event message; ab = payload queue length // Basic Config #include "globals.h" +#include #include // needed for reading ESP32 chip attributes #define DISPLAY_PAGES (4) // number of display pages - -HAS_DISPLAY u8x8(MY_OLED_RST, MY_OLED_SCL, MY_OLED_SDA); +#define USE_BACKBUFFER // for display library // helper arry for converting month values to text const char *printmonth[] = {"xxx", "Jan", "Feb", "Mar", "Apr", "May", "Jun", @@ -38,82 +38,63 @@ const char *printmonth[] = {"xxx", "Jan", "Feb", "Mar", "Apr", "May", "Jun", uint8_t DisplayIsOn = 0; -// helper function, prints a hex key on display -void DisplayKey(const uint8_t *key, uint8_t len, bool lsb) { - const uint8_t *p; - for (uint8_t i = 0; i < len; i++) { - p = lsb ? key + len - i - 1 : key + i; - u8x8.printf("%02X", *p); - } - u8x8.printf("\n"); -} - void init_display(const char *Productname, const char *Version) { // block i2c bus access if (!I2C_MUTEX_LOCK()) ESP_LOGV(TAG, "[%0.3f] i2c mutex lock failed", millis() / 1000.0); else { - // show startup screen - uint8_t buf[32]; - u8x8.begin(); - u8x8.setFont(u8x8_font_chroma48medium8_r); - u8x8.clear(); - u8x8.setFlipMode(0); - u8x8.setInverseFont(1); - u8x8.draw2x2String(0, 0, Productname); - u8x8.setInverseFont(0); - u8x8.draw2x2String(2, 2, Productname); - delay(500); - u8x8.clear(); - u8x8.setFlipMode(1); - u8x8.setInverseFont(1); - u8x8.draw2x2String(0, 0, Productname); - u8x8.setInverseFont(0); - u8x8.draw2x2String(2, 2, Productname); - delay(500); - u8x8.setFlipMode(0); - u8x8.clear(); - -#ifdef DISPLAY_FLIP - u8x8.setFlipMode(1); + // init display +#ifndef DISPLAY_FLIP + oledInit(OLED_128x64, ANGLE_0, false, -1, -1, 400000L); +#else + oledInit(OLED_128x64, ANGLE_FLIPY, false, -1, -1, 400000L); #endif -// Display chip information + // clear display + oledFill(0, 1); + + // show startup screen + // to come -> display .bmp file with logo + +// show chip information #if (VERBOSE) esp_chip_info_t chip_info; esp_chip_info(&chip_info); - u8x8.printf("ESP32 %d cores\nWiFi%s%s\n", chip_info.cores, - (chip_info.features & CHIP_FEATURE_BT) ? "/BT" : "", - (chip_info.features & CHIP_FEATURE_BLE) ? "/BLE" : ""); - u8x8.printf("ESP Rev.%d\n", chip_info.revision); - u8x8.printf("%dMB %s Flash\n", spi_flash_get_chip_size() / (1024 * 1024), - (chip_info.features & CHIP_FEATURE_EMB_FLASH) ? "int." - : "ext."); + dp_printf(0, 0, 0, 0, "ESP32 %d cores", chip_info.cores); + dp_printf(0, 2, 0, 0, "Chip Rev.%d", chip_info.revision); + dp_printf(0, 1, 0, 0, "WiFi%s%s", + (chip_info.features & CHIP_FEATURE_BT) ? "/BT" : "", + (chip_info.features & CHIP_FEATURE_BLE) ? "/BLE" : ""); + dp_printf(0, 3, 0, 0, "%dMB %s Flash", + spi_flash_get_chip_size() / (1024 * 1024), + (chip_info.features & CHIP_FEATURE_EMB_FLASH) ? "int." : "ext."); #endif // VERBOSE - u8x8.print(Productname); - u8x8.print(" v"); - u8x8.println(PROGVERSION); - #if (HAS_LORA) - u8x8.println("DEVEUI:"); + uint8_t buf[34]; + const uint8_t *p; os_getDevEui((u1_t *)buf); - DisplayKey(buf, 8, true); - delay(3000); + dp_printf(0, 5, 0, 0, "DEVEUI:"); + for (uint8_t i = 0; i < 8; i++) { + p = buf + 7 - i; + dp_printf(i * 16, 6, 0, 0, "%02X", *p); + } #endif // HAS_LORA - u8x8.clear(); - u8x8.setPowerSave(!cfg.screenon); // set display off if disabled - u8x8.draw2x2String(0, 0, "PAX:0"); + + dp_printf(0, 4, 0, 0, "Software v%s", PROGVERSION); + delay(3000); + + oledFill(0, 1); + oledPower(cfg.screenon); // set display off if disabled + dp_printf(0, 0, 1, 0, "PAX:0"); #if (BLECOUNTER) - u8x8.setCursor(0, 3); - u8x8.printf("BLTH:0"); + dp_printf(0, 3, 0, 0, "BLTH:0"); #endif - u8x8.setCursor(0, 4); - u8x8.printf("WIFI:0"); - u8x8.setCursor(0, 5); - u8x8.printf(!cfg.rssilimit ? "RLIM:off " : "RLIM:%d", cfg.rssilimit); + dp_printf(0, 4, 0, 0, "WIFI:0"); + dp_printf(0, 5, 0, 0, !cfg.rssilimit ? "RLIM:off " : "RLIM:%d", + cfg.rssilimit); I2C_MUTEX_UNLOCK(); // release i2c bus access } // mutex @@ -137,12 +118,12 @@ void refreshTheDisplay(bool nextPage) { // set display on/off according to current device configuration if (DisplayIsOn != cfg.screenon) { DisplayIsOn = cfg.screenon; - u8x8.setPowerSave(!cfg.screenon); + oledPower(cfg.screenon); } if (nextPage) { DisplayPage = (DisplayPage >= DISPLAY_PAGES - 1) ? 0 : (DisplayPage + 1); - u8x8.clear(); + oledFill(0, 1); } draw_page(t, DisplayPage); @@ -161,11 +142,8 @@ void draw_page(time_t t, uint8_t page) { #endif // update counter (lines 0-1) - snprintf( - buff, sizeof(buff), "PAX:%-4d", - (int)macs.size()); // convert 16-bit MAC counter to decimal counter value - u8x8.draw2x2String(0, 0, - buff); // display number on unique macs total Wifi + BLE + dp_printf(0, 0, FONT_STRETCHED, 0, "PAX:%-4d", + (int)macs.size()); // display number of unique macs total Wifi + BLE switch (page % DISPLAY_PAGES) { @@ -178,139 +156,108 @@ void draw_page(time_t t, uint8_t page) { // update Battery status (line 2) #if (defined BAT_MEASURE_ADC || defined HAS_PMU) - u8x8.setCursor(0, 2); if (batt_voltage == 0xffff) - u8x8.printf("B:USB "); + dp_printf(0, 2, 0, 0, "%s", "B:USB "); else - u8x8.printf("B:%.2fV", batt_voltage / 1000.0); + dp_printf(0, 2, 0, 0, "B:%.2fV", batt_voltage / 1000.0); #endif // update GPS status (line 2) #if (HAS_GPS) - u8x8.setCursor(9, 2); if (gps.location.age() < 1500) // if no fix then display Sats value inverse - u8x8.printf("Sats:%.2d", gps.satellites.value()); - else { - u8x8.setInverseFont(1); - u8x8.printf("Sats:%.2d", gps.satellites.value()); - u8x8.setInverseFont(0); - } + dp_printf(72, 2, 0, 0, "Sats:%.2d", gps.satellites.value()); + else + dp_printf(72, 2, 0, 1, "Sats:%.2d", gps.satellites.value()); #endif - // update bluetooth counter + LoRa SF (line 3) + // update bluetooth counter + LoRa SF (line 3) #if (BLECOUNTER) - u8x8.setCursor(0, 3); if (cfg.blescan) - u8x8.printf("BLTH:%-5d", macs_ble); + dp_printf(0, 3, 0, 0, "BLTH:%-5d", macs_ble); else - u8x8.printf("%s", "BLTH:off"); + dp_printf(0, 3, 0, 0, "%s", "BLTH:off"); #endif #if (HAS_LORA) - u8x8.setCursor(12, 3); - if (!cfg.adrmode) // if ADR=off then display SF value inverse - u8x8.setInverseFont(1); - u8x8.printf("%-4s", getSfName(updr2rps(LMIC.datarate))); - if (!cfg.adrmode) // switch off inverse if it was turned on - u8x8.setInverseFont(0); + if (cfg.adrmode) + dp_printf(96, 3, 0, 0, "%-4s", getSfName(updr2rps(LMIC.datarate))); + else // if ADR=off then display SF value inverse + dp_printf(96, 3, 0, 1, "%-4s", getSfName(updr2rps(LMIC.datarate))); #endif // HAS_LORA // line 4: update wifi counter + channel display - u8x8.setCursor(0, 4); - u8x8.printf("WIFI:%-5d", macs_wifi); - u8x8.setCursor(11, 4); - u8x8.printf("ch:%02d", channel); + dp_printf(0, 4, 0, 0, "WIFI:%-5d", macs_wifi); + dp_printf(88, 4, 0, 0, "ch:%02d", channel); // line 5: update RSSI limiter status & free memory display - u8x8.setCursor(0, 5); - u8x8.printf(!cfg.rssilimit ? "RLIM:off " : "RLIM:%-4d", cfg.rssilimit); - u8x8.setCursor(10, 5); - u8x8.printf("%4dKB", getFreeRAM() / 1024); + dp_printf(0, 5, 0, 0, !cfg.rssilimit ? "RLIM:off " : "RLIM:%-4d", + cfg.rssilimit); + dp_printf(80, 5, 0, 0, "%4dKB", getFreeRAM() / 1024); // line 6: update time-of-day or LoRa status display - u8x8.setCursor(0, 6); #if (TIME_SYNC_INTERVAL) // we want a systime display instead LoRa status timeState = TimePulseTick ? ' ' : timeSetSymbols[timeSource]; TimePulseTick = false; // display inverse timeState if clock controller is enabled #if (defined HAS_DCF77) || (defined HAS_IF482) - u8x8.printf("%02d:%02d:%02d", hour(t), minute(t), second(t)); - u8x8.setInverseFont(1); - u8x8.printf("%c", timeState); - u8x8.setInverseFont(0); + dp_printf(0, 6, FONT_SMALL, 0, "%02d:%02d:%02d", hour(t), minute(t), + second(t)); + dp_printf(56, 6, FONT_SMALL, 1, "%c", timeState); #else - u8x8.printf("%02d:%02d:%02d%c", hour(t), minute(t), second(t), timeState); + dp_printf(0, 6, FONT_SMALL, 0, "%02d:%02d:%02d%c", hour(t), minute(t), + second(t), timeState); #endif // HAS_DCF77 || HAS_IF482 if (timeSource != _unsynced) - u8x8.printf(" %2d.%3s", day(t), printmonth[month(t)]); + dp_printf(72, 6, FONT_SMALL, 0, " %2d.%3s%4s", day(t), + printmonth[month(t)], year(t)); #endif // TIME_SYNC_INTERVAL #if (HAS_LORA) // line 7: update LMiC event display - u8x8.setCursor(0, 7); - u8x8.printf("%-14s", lmic_event_msg); + dp_printf(0, 7, FONT_SMALL, 0, "%-14s", lmic_event_msg); // update LoRa send queue display msgWaiting = uxQueueMessagesWaiting(LoraSendQueue); if (msgWaiting) { sprintf(buff, "%2d", msgWaiting); - u8x8.setCursor(14, 7); - u8x8.printf("%-2s", msgWaiting == SEND_QUEUE_SIZE ? "<>" : buff); + dp_printf(112, 7, FONT_SMALL, 0, "%-2s", + msgWaiting == SEND_QUEUE_SIZE ? "<>" : buff); } else - u8x8.printf(" "); + dp_printf(112, 7, FONT_SMALL, 0, " "); #endif // HAS_LORA break; // page0 case 1: - - // line 4-5: update time-of-day - snprintf(buff, sizeof(buff), "%02d:%02d:%02d", hour(t), minute(t), - second(t)); - u8x8.draw2x2String(0, 4, buff); - + dp_printf(0, 4, FONT_STRETCHED, 0, "%02d:%02d:%02d", hour(t), minute(t), + second(t)); break; // page1 case 2: - // update counter (lines 0-1) - snprintf( - buff, sizeof(buff), "PAX:%-4d", - (int) - macs.size()); // convert 16-bit MAC counter to decimal counter value - u8x8.draw2x2String(0, 0, - buff); // display number on unique macs total Wifi + BLE - #if (HAS_GPS) if (gps.location.age() < 1500) { // line 5: clear "No fix" if (wasnofix) { - snprintf(buff, sizeof(buff), " "); - u8x8.draw2x2String(2, 5, buff); + dp_printf(16, 5, FONT_STRETCHED, 0, " "); wasnofix = false; } // line 3-4: GPS latitude - snprintf(buff, sizeof(buff), "%c%07.4f", - gps.location.rawLat().negative ? 'S' : 'N', gps.location.lat()); - u8x8.draw2x2String(0, 3, buff); + dp_printf(0, 3, FONT_STRETCHED, 0, "%c%07.4f", + gps.location.rawLat().negative ? 'S' : 'N', gps.location.lat()); // line 6-7: GPS longitude - snprintf(buff, sizeof(buff), "%c%07.4f", - gps.location.rawLat().negative ? 'W' : 'E', gps.location.lng()); - u8x8.draw2x2String(0, 6, buff); + dp_printf(0, 6, FONT_STRETCHED, 0, "%c%07.4f", + gps.location.rawLat().negative ? 'W' : 'E', gps.location.lng()); } else { - snprintf(buff, sizeof(buff), "No fix"); - u8x8.setInverseFont(1); - u8x8.draw2x2String(2, 5, buff); - u8x8.setInverseFont(0); + dp_printf(16, 5, FONT_STRETCHED, 1, "No fix"); wasnofix = true; } #else - snprintf(buff, sizeof(buff), "No GPS"); - u8x8.draw2x2String(2, 5, buff); + dp_printf(16, 5, FONT_STRETCHED, 1, "No GPS"); #endif break; // page2 @@ -319,22 +266,18 @@ void draw_page(time_t t, uint8_t page) { #if (HAS_BME) // line 2-3: Temp - snprintf(buff, sizeof(buff), "TMP:%-2.1f", bme_status.temperature); - u8x8.draw2x2String(0, 2, buff); + dp_printf(0, 2, FONT_STRETCHED, 0, "TMP:%-2.1f", bme_status.temperature); // line 4-5: Hum - snprintf(buff, sizeof(buff), "HUM:%-2.1f", bme_status.humidity); - u8x8.draw2x2String(0, 4, buff); + dp_printf(0, 4, FONT_STRETCHED, 0, "HUM:%-2.1f", bme_status.humidity); #ifdef HAS_BME680 // line 6-7: IAQ - snprintf(buff, sizeof(buff), "IAQ:%-3.0f", bme_status.iaq); - u8x8.draw2x2String(0, 6, buff); + dp_printf(0, 6, FONT_STRETCHED, 0, "IAQ:%-3.0f", bme_status.iaq); #endif #else - snprintf(buff, sizeof(buff), "No BME"); - u8x8.draw2x2String(2, 5, buff); + dp_printf(16, 5, FONT_STRETCHED, 1, "No BME"); #endif break; // page3 @@ -346,4 +289,34 @@ void draw_page(time_t t, uint8_t page) { } // draw_page +// display print helper function + +void dp_printf(int x, int y, int font, int inv, const char *format, ...) { + char loc_buf[64]; + char *temp = loc_buf; + va_list arg; + va_list copy; + va_start(arg, format); + va_copy(copy, arg); + int len = vsnprintf(temp, sizeof(loc_buf), format, copy); + va_end(copy); + if (len < 0) { + va_end(arg); + return; + }; + if (len >= sizeof(loc_buf)) { + temp = (char *)malloc(len + 1); + if (temp == NULL) { + va_end(arg); + return; + } + len = vsnprintf(temp, len + 1, format, arg); + } + va_end(arg); + oledWriteString(0, x, y, temp, font, inv, 1); + if (temp != loc_buf) { + free(temp); + } +} + #endif // HAS_DISPLAY \ No newline at end of file diff --git a/src/hal/ecopower.h b/src/hal/ecopower.h index 4f4b303a..deca82d7 100644 --- a/src/hal/ecopower.h +++ b/src/hal/ecopower.h @@ -12,7 +12,7 @@ //#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature -#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C +#define HAS_DISPLAY 1 //#define DISPLAY_FLIP 1 // use if display is rotated #define BAT_MEASURE_ADC ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7 #define BAT_VOLTAGE_DIVIDER ((82.0+220.0)/82.0) // 82k + 220k 1% @@ -29,7 +29,7 @@ // Pins for I2C interface of OLED Display #define MY_OLED_SDA SDA #define MY_OLED_SCL SCL -#define MY_OLED_RST U8X8_PIN_NONE +#define MY_OLED_RST NOT_A_PIN // Settings for on board DS3231 RTC chip // note: to use RTC_INT, capacitor 100nF next to red LED must be removed to sharpen interrupt signal slope diff --git a/src/hal/generic.h b/src/hal/generic.h index c606e5ba..909bef38 100644 --- a/src/hal/generic.h +++ b/src/hal/generic.h @@ -44,7 +44,7 @@ #define BOARD_HAS_PSRAM // use if board has external PSRAM #define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature -#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C +#define HAS_DISPLAY 1 //#define DISPLAY_FLIP 1 // use if display is rotated #define BAT_MEASURE_ADC ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7 #define BAT_VOLTAGE_DIVIDER 2 // voltage divider 100k/100k on board diff --git a/src/hal/heltec.h b/src/hal/heltec.h index 465793a1..4432c9a3 100644 --- a/src/hal/heltec.h +++ b/src/hal/heltec.h @@ -16,7 +16,7 @@ #define HAS_LORA 1 // comment out if device shall not send data via LoRa #define CFG_sx1276_radio 1 -#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board +#define HAS_DISPLAY 1 // OLED-Display on board #define HAS_LED LED_BUILTIN // white LED on board #define HAS_BUTTON KEY_BUILTIN // button "PROG" on board diff --git a/src/hal/heltecv2.h b/src/hal/heltecv2.h index adb74981..96024e38 100644 --- a/src/hal/heltecv2.h +++ b/src/hal/heltecv2.h @@ -16,7 +16,7 @@ #define HAS_LORA 1 // comment out if device shall not send data via LoRa #define CFG_sx1276_radio 1 -#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board +#define HAS_DISPLAY 1 // OLED-Display on board #define HAS_LED LED_BUILTIN // white LED on board #define HAS_BUTTON KEY_BUILTIN // button "PROG" on board diff --git a/src/hal/lolin32litelora.h b/src/hal/lolin32litelora.h index 11f3f156..07af6837 100644 --- a/src/hal/lolin32litelora.h +++ b/src/hal/lolin32litelora.h @@ -13,7 +13,7 @@ // disable brownout detection (avoid unexpected reset on some boards) #define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature -#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board +#define HAS_DISPLAY 1 // OLED-Display on board //#define DISPLAY_FLIP 1 // uncomment this for rotated display #define HAS_LED 22 // ESP32 GPIO12 (pin22) On Board LED #define LED_ACTIVE_LOW 1 // Onboard LED is active when pin is LOW @@ -37,7 +37,7 @@ // Pins for I2C interface of OLED Display #define MY_OLED_SDA (14) #define MY_OLED_SCL (12) -#define MY_OLED_RST U8X8_PIN_NONE +#define MY_OLED_RST NOT_A_PIN // I2C config for Microchip 24AA02E64 DEVEUI unique address #define MCP_24AA02E64_I2C_ADDRESS 0x50 // I2C address for the 24AA02E64 diff --git a/src/hal/lolin32lora.h b/src/hal/lolin32lora.h index a79b0d84..a14c9605 100644 --- a/src/hal/lolin32lora.h +++ b/src/hal/lolin32lora.h @@ -13,7 +13,7 @@ // disable brownout detection (avoid unexpected reset on some boards) #define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature -#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board +#define HAS_DISPLAY 1 // OLED-Display on board //#define DISPLAY_FLIP 1 // uncomment this for rotated display #define HAS_LED NOT_A_PIN // Led os on same pin as Lora SS pin, to avoid problems, we don't use it #define LED_ACTIVE_LOW 1 // Onboard LED is active when pin is LOW @@ -39,7 +39,7 @@ // Pins for I2C interface of OLED Display #define MY_OLED_SDA (21) #define MY_OLED_SCL (22) -#define MY_OLED_RST U8X8_PIN_NONE +#define MY_OLED_RST NOT_A_PIN // I2C config for Microchip 24AA02E64 DEVEUI unique address #define MCP_24AA02E64_I2C_ADDRESS 0x50 // I2C address for the 24AA02E64 diff --git a/src/hal/octopus32.h b/src/hal/octopus32.h index d245a8c2..f34f609b 100644 --- a/src/hal/octopus32.h +++ b/src/hal/octopus32.h @@ -41,10 +41,10 @@ #define LORA_IO2 LMIC_UNUSED_PIN // Pins for I2C interface of OLED Display -#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // U8X8_SSD1306_128X32_UNIVISION_SW_I2C // +#define HAS_DISPLAY 1 //#define DISPLAY_FLIP 1 // uncomment this for rotated display #define MY_OLED_SDA (23) #define MY_OLED_SCL (22) -#define MY_OLED_RST U8X8_PIN_NONE +#define MY_OLED_RST NOT_A_PIN #endif diff --git a/src/hal/ttgobeam.h b/src/hal/ttgobeam.h index f8be7ee0..a4d81926 100644 --- a/src/hal/ttgobeam.h +++ b/src/hal/ttgobeam.h @@ -33,10 +33,10 @@ #define BME680_ADDR BME680_I2C_ADDR_PRIMARY // !! connect SDIO of BME680 to GND !! // display (if connected) -#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C +#define HAS_DISPLAY 1 #define MY_OLED_SDA SDA #define MY_OLED_SCL SCL -#define MY_OLED_RST U8X8_PIN_NONE +#define MY_OLED_RST NOT_A_PIN //#define DISPLAY_FLIP 1 // use if display is rotated // user defined sensors (if connected) diff --git a/src/hal/ttgobeam10.h b/src/hal/ttgobeam10.h index fa0b3ffa..35bd78da 100644 --- a/src/hal/ttgobeam10.h +++ b/src/hal/ttgobeam10.h @@ -20,10 +20,10 @@ User, long press -> send LORA message Reset -> reset device */ -//#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C +#define HAS_DISPLAY 1 #define MY_OLED_SDA SDA #define MY_OLED_SCL SCL -#define MY_OLED_RST U8X8_PIN_NONE +#define MY_OLED_RST NOT_A_PIN //#define DISPLAY_FLIP 1 // use if display is rotated #define HAS_LORA 1 // comment out if device shall not send data via LoRa diff --git a/src/hal/ttgofox.h b/src/hal/ttgofox.h index 94b2b60f..8a7e3a9c 100644 --- a/src/hal/ttgofox.h +++ b/src/hal/ttgofox.h @@ -10,7 +10,7 @@ #define HAS_LORA 1 // comment out if device shall not send data via LoRa #define CFG_sx1276_radio 1 // HPD13A LoRa SoC -#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C +#define HAS_DISPLAY 1 #define HAS_LED NOT_A_PIN // green on board LED is useless, is GPIO25, which switches power for Lora+Display #define EXT_POWER_SW GPIO_NUM_25 // switches power for LoRa chip @@ -23,7 +23,7 @@ // Pins for I2C interface of OLED Display #define MY_OLED_SDA (21) #define MY_OLED_SCL (22) -#define MY_OLED_RST U8X8_PIN_NONE +#define MY_OLED_RST NOT_A_PIN // Settings for on board DS3231 RTC chip #define HAS_RTC MY_OLED_SDA, MY_OLED_SCL // SDA, SCL diff --git a/src/hal/ttgov1.h b/src/hal/ttgov1.h index fddc3ef5..1aaf20c3 100644 --- a/src/hal/ttgov1.h +++ b/src/hal/ttgov1.h @@ -12,7 +12,7 @@ #define HAS_LORA 1 // comment out if device shall not send data via LoRa #define CFG_sx1276_radio 1 -#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board +#define HAS_DISPLAY 1 // OLED-Display on board //#define DISPLAY_FLIP 1 // uncomment this for rotated display #define HAS_LED LED_BUILTIN #define LED_ACTIVE_LOW 1 // Onboard LED is active when pin is LOW diff --git a/src/hal/ttgov2.h b/src/hal/ttgov2.h index 54f1657a..e5e784f3 100644 --- a/src/hal/ttgov2.h +++ b/src/hal/ttgov2.h @@ -12,7 +12,7 @@ #define HAS_LORA 1 // comment out if device shall not send data via LoRa #define CFG_sx1276_radio 1 // HPD13A LoRa SoC -#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C +#define HAS_DISPLAY 1 //#define DISPLAY_FLIP 1 // uncomment this for rotated display #define HAS_LED NOT_A_PIN // on-board LED is wired to SCL (used by display) therefore totally useless @@ -22,7 +22,7 @@ // Pins for I2C interface of OLED Display #define MY_OLED_SDA (21) #define MY_OLED_SCL (22) -#define MY_OLED_RST U8X8_PIN_NONE +#define MY_OLED_RST NOT_A_PIN // Pins for LORA chip SPI interface come from board file, we need some // additional definitions for LMIC diff --git a/src/hal/ttgov21new.h b/src/hal/ttgov21new.h index c50869b2..4c1cd4fc 100644 --- a/src/hal/ttgov21new.h +++ b/src/hal/ttgov21new.h @@ -20,7 +20,7 @@ //#define HAS_BME 1 // Enable BME sensors in general //#define HAS_BME280 GPIO_NUM_21, GPIO_NUM_22 // SDA, SCL -#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C +#define HAS_DISPLAY 1 #define HAS_LED (25) // green on board LED #define BAT_MEASURE_ADC ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7 #define BAT_VOLTAGE_DIVIDER 2 // voltage divider 100k/100k on board @@ -28,7 +28,7 @@ // Pins for I2C interface of OLED Display #define MY_OLED_SDA (21) #define MY_OLED_SCL (22) -#define MY_OLED_RST U8X8_PIN_NONE +#define MY_OLED_RST NOT_A_PIN // Pins for LORA chip SPI interface, reset line and interrupt lines #define LORA_SCK (5) diff --git a/src/hal/ttgov21old.h b/src/hal/ttgov21old.h index 0a7c386c..a19887ca 100644 --- a/src/hal/ttgov21old.h +++ b/src/hal/ttgov21old.h @@ -19,7 +19,7 @@ #define HAS_LED NOT_A_PIN // no usable LED on board #define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature -#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C +#define HAS_DISPLAY 1 //#define DISPLAY_FLIP 1 // rotated display //#define BAT_MEASURE_ADC ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7 //#define BAT_VOLTAGE_DIVIDER 2 // voltage divider 100k/100k on board @@ -27,7 +27,7 @@ // Pins for I2C interface of OLED Display #define MY_OLED_SDA (21) #define MY_OLED_SCL (22) -#define MY_OLED_RST U8X8_PIN_NONE +#define MY_OLED_RST NOT_A_PIN // Pins for LORA chip SPI interface, reset line and interrupt lines #define LORA_SCK (5) diff --git a/src/hal/wemos32oled.h b/src/hal/wemos32oled.h index 3b59e450..2955fbaa 100644 --- a/src/hal/wemos32oled.h +++ b/src/hal/wemos32oled.h @@ -9,10 +9,10 @@ #define HAS_LED NOT_A_PIN // no LED -#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C +#define HAS_DISPLAY 1 #define MY_OLED_SDA (5) #define MY_OLED_SCL (4) -#define MY_OLED_RST U8X8_PIN_NONE +#define MY_OLED_RST NOT_A_PIN #define DISPLAY_FLIP 1 // use if display is rotated #define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature diff --git a/src/ota.cpp b/src/ota.cpp index fc1662bc..e05b6f8f 100644 --- a/src/ota.cpp +++ b/src/ota.cpp @@ -49,24 +49,24 @@ void start_ota_update() { switch_LED(LED_ON); #ifdef HAS_DISPLAY - u8x8.begin(); - u8x8.setFont(u8x8_font_chroma48medium8_r); - u8x8.clear(); -#ifdef DISPLAY_FLIP - u8x8.setFlipMode(1); -#endif - u8x8.setInverseFont(1); - u8x8.print("SOFTWARE UPDATE \n"); - u8x8.setInverseFont(0); - u8x8.print("WiFi connect ..\n"); - u8x8.print("Has Update? ..\n"); - u8x8.print("Fetching ..\n"); - u8x8.print("Downloading ..\n"); - u8x8.print("Rebooting .."); + +// init display +#ifndef DISPLAY_FLIP + int rc = oledInit(OLED_128x64, ANGLE_0, false, -1, -1, 100000L); +#else + int rc = oledInit(OLED_128x64, ANGLE_FLIPY, false, -1, -1, 100000L); #endif + oledFill(0, 1); + dp_printf(0, 0, 0, 1, "SOFTWARE UPDATE"); + dp_printf(0, 1, 0, 0, "WiFi connect .."); + dp_printf(0, 2, 0, 0, "Has Update? .."); + dp_printf(0, 3, 0, 0, "Fetching .."); + dp_printf(0, 4, 0, 0, "Downloading .."); + dp_printf(0, 5, 0, 0, "Rebooting .."); + ESP_LOGI(TAG, "Starting Wifi OTA update"); - display(1, "**", WIFI_SSID); + ota_display(1, "**", WIFI_SSID); WiFi.mode(WIFI_STA); WiFi.begin(WIFI_SSID, WIFI_PASS); @@ -81,7 +81,7 @@ void start_ota_update() { if (WiFi.status() == WL_CONNECTED) { // we now have wifi connection and try to do an OTA over wifi update ESP_LOGI(TAG, "Connected to %s", WIFI_SSID); - display(1, "OK", "WiFi connected"); + ota_display(1, "OK", "WiFi connected"); // do a number of tries to update firmware limited by OTA_MAX_TRY uint8_t j = OTA_MAX_TRY; while ((j--) && (ret > 0)) { @@ -97,13 +97,13 @@ void start_ota_update() { // wifi did not connect ESP_LOGI(TAG, "Could not connect to %s", WIFI_SSID); - display(1, " E", "no WiFi connect"); + ota_display(1, " E", "no WiFi connect"); delay(5000); end: switch_LED(LED_OFF); ESP_LOGI(TAG, "Rebooting to %s firmware", (ret == 0) ? "new" : "current"); - display(5, "**", ""); // mark line rebooting + ota_display(5, "**", ""); // mark line rebooting delay(5000); ESP.restart(); @@ -119,7 +119,7 @@ int do_ota_update() { // Fetch the latest firmware version ESP_LOGI(TAG, "Checking latest firmware version on server"); - display(2, "**", "checking version"); + ota_display(2, "**", "checking version"); if (WiFi.status() != WL_CONNECTED) return 1; @@ -128,23 +128,23 @@ int do_ota_update() { if (latest.length() == 0) { ESP_LOGI(TAG, "Could not fetch info on latest firmware"); - display(2, " E", "file not found"); + ota_display(2, " E", "file not found"); return -1; } else if (version_compare(latest, cfg.version) <= 0) { ESP_LOGI(TAG, "Current firmware is up to date"); - display(2, "NO", "no update found"); + ota_display(2, "NO", "no update found"); return -1; } ESP_LOGI(TAG, "New firmware version v%s available", latest.c_str()); - display(2, "OK", latest.c_str()); + ota_display(2, "OK", latest.c_str()); - display(3, "**", ""); + ota_display(3, "**", ""); if (WiFi.status() != WL_CONNECTED) return 1; String firmwarePath = bintray.getBinaryPath(latest); if (!firmwarePath.endsWith(".bin")) { ESP_LOGI(TAG, "Unsupported binary format"); - display(3, " E", "file type error"); + ota_display(3, " E", "file type error"); return -1; } @@ -158,7 +158,7 @@ int do_ota_update() { if (!client.connect(currentHost.c_str(), port)) { ESP_LOGI(TAG, "Cannot connect to %s", currentHost.c_str()); - display(3, " E", "connection lost"); + ota_display(3, " E", "connection lost"); goto abort; } @@ -169,7 +169,7 @@ int do_ota_update() { if (!client.connect(currentHost.c_str(), port)) { ESP_LOGI(TAG, "Redirect detected, but cannot connect to %s", currentHost.c_str()); - display(3, " E", "server error"); + ota_display(3, " E", "server error"); goto abort; } } @@ -185,7 +185,7 @@ int do_ota_update() { while (client.available() == 0) { if ((millis() - timeout) > (RESPONSE_TIMEOUT_MS)) { ESP_LOGI(TAG, "Client timeout"); - display(3, " E", "client timeout"); + ota_display(3, " E", "client timeout"); goto abort; } } @@ -243,12 +243,12 @@ int do_ota_update() { } // while (client.available()) } // while (redirect) - display(3, "OK", ""); // line download + ota_display(3, "OK", ""); // line download // check whether we have everything for OTA update if (!(contentLength && isValidContentType)) { ESP_LOGI(TAG, "Invalid OTA server response"); - display(4, " E", "response error"); + ota_display(4, " E", "response error"); goto retry; } @@ -262,7 +262,7 @@ int do_ota_update() { if (!Update.begin(contentLength)) { #endif ESP_LOGI(TAG, "Not enough space to start OTA update"); - display(4, " E", "disk full"); + ota_display(4, " E", "disk full"); goto abort; } @@ -271,13 +271,13 @@ int do_ota_update() { Update.onProgress(&show_progress); #endif - display(4, "**", "writing..."); + ota_display(4, "**", "writing..."); written = Update.writeStream(client); // this is a blocking call if (written == contentLength) { ESP_LOGI(TAG, "Written %u bytes successfully", written); snprintf(buf, 17, "%ukB Done!", (uint16_t)(written / 1024)); - display(4, "OK", buf); + ota_display(4, "OK", buf); } else { ESP_LOGI(TAG, "Written only %u of %u bytes, OTA update attempt cancelled", written, contentLength); @@ -288,7 +288,7 @@ int do_ota_update() { } else { ESP_LOGI(TAG, "An error occurred. Error#: %d", Update.getError()); snprintf(buf, 17, "Error#: %d", Update.getError()); - display(4, " E", buf); + ota_display(4, " E", buf); goto retry; } @@ -307,27 +307,25 @@ retry: } // do_ota_update -void display(const uint8_t row, const std::string status, - const std::string msg) { +void ota_display(const uint8_t row, const std::string status, + const std::string msg) { #ifdef HAS_DISPLAY - u8x8.setCursor(14, row); - u8x8.print((status.substr(0, 2)).c_str()); + dp_printf(112, row, 0, 0, status.substr(0, 2).c_str()); if (!msg.empty()) { - u8x8.clearLine(7); - u8x8.setCursor(0, 7); - u8x8.print(msg.substr(0, 16).c_str()); + dp_printf(0, 7, 0, 0, " "); + dp_printf(0, 7, 0, 0, msg.substr(0, 16).c_str()); } #endif } -#ifdef HAS_DISPLAY // callback function to show download progress while streaming data void show_progress(unsigned long current, unsigned long size) { +#ifdef HAS_DISPLAY char buf[17]; snprintf(buf, 17, "%-9lu (%3lu%%)", current, current * 100 / size); - display(4, "**", buf); -} + ota_display(4, "**", buf); #endif +} // helper function to convert strings into lower case bool comp(char s1, char s2) { return tolower(s1) < tolower(s2); } diff --git a/src/paxcounter.conf b/src/paxcounter.conf index 38feccc3..79943454 100644 --- a/src/paxcounter.conf +++ b/src/paxcounter.conf @@ -76,7 +76,7 @@ #define TIME_SYNC_INTERVAL_RETRY 10 // retry time sync after lost sync each .. minutes [default = 10], 0 means off #define TIME_SYNC_COMPILEDATE 0 // set to 1 to use compile date to initialize RTC after power outage [default = 0] #define TIME_SYNC_LORAWAN 0 // set to 1 to use LORA network as time source, 0 means off [default = 0] -#define TIME_SYNC_LORASERVER 0 // set to 1 to use LORA timeserver as time source, 0 means off [default = 0] +#define TIME_SYNC_LORASERVER 1 // set to 1 to use LORA timeserver as time source, 0 means off [default = 0] // settings for syncing time with timeserver applications #define TIME_SYNC_SAMPLES 1 // number of time requests for averaging From 4a686bc2673c0a62c671d6b31164821030dc9daa Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Fri, 27 Sep 2019 13:03:55 +0200 Subject: [PATCH 04/26] new oled driver (experimental) --- src/display.cpp | 19 +++++-------------- src/ota.cpp | 1 + 2 files changed, 6 insertions(+), 14 deletions(-) diff --git a/src/display.cpp b/src/display.cpp index 8db7eefa..5d7127c1 100644 --- a/src/display.cpp +++ b/src/display.cpp @@ -88,13 +88,6 @@ void init_display(const char *Productname, const char *Version) { oledFill(0, 1); oledPower(cfg.screenon); // set display off if disabled - dp_printf(0, 0, 1, 0, "PAX:0"); -#if (BLECOUNTER) - dp_printf(0, 3, 0, 0, "BLTH:0"); -#endif - dp_printf(0, 4, 0, 0, "WIFI:0"); - dp_printf(0, 5, 0, 0, !cfg.rssilimit ? "RLIM:off " : "RLIM:%d", - cfg.rssilimit); I2C_MUTEX_UNLOCK(); // release i2c bus access } // mutex @@ -201,16 +194,14 @@ void draw_page(time_t t, uint8_t page) { TimePulseTick = false; // display inverse timeState if clock controller is enabled #if (defined HAS_DCF77) || (defined HAS_IF482) - dp_printf(0, 6, FONT_SMALL, 0, "%02d:%02d:%02d", hour(t), minute(t), - second(t)); - dp_printf(56, 6, FONT_SMALL, 1, "%c", timeState); + dp_printf(0, 6, 0, 0, "%02d:%02d:%02d", hour(t), minute(t), second(t)); + dp_printf(56, 6, 0, 1, "%c", timeState); #else - dp_printf(0, 6, FONT_SMALL, 0, "%02d:%02d:%02d%c", hour(t), minute(t), - second(t), timeState); + dp_printf(0, 6, 0, 0, "%02d:%02d:%02d%c", hour(t), minute(t), second(t), + timeState); #endif // HAS_DCF77 || HAS_IF482 if (timeSource != _unsynced) - dp_printf(72, 6, FONT_SMALL, 0, " %2d.%3s%4s", day(t), - printmonth[month(t)], year(t)); + dp_printf(72, 6, 0, 0, " %2d.%3s", day(t), printmonth[month(t)]); #endif // TIME_SYNC_INTERVAL diff --git a/src/ota.cpp b/src/ota.cpp index e05b6f8f..91d28e11 100644 --- a/src/ota.cpp +++ b/src/ota.cpp @@ -64,6 +64,7 @@ void start_ota_update() { dp_printf(0, 3, 0, 0, "Fetching .."); dp_printf(0, 4, 0, 0, "Downloading .."); dp_printf(0, 5, 0, 0, "Rebooting .."); +#endif ESP_LOGI(TAG, "Starting Wifi OTA update"); ota_display(1, "**", WIFI_SSID); From c30ee996be58f29142044d8a5601599058a66075 Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Fri, 27 Sep 2019 17:37:16 +0200 Subject: [PATCH 05/26] new display mask --- src/display.cpp | 137 ++++++++++++++++++++++++------------------------ 1 file changed, 69 insertions(+), 68 deletions(-) diff --git a/src/display.cpp b/src/display.cpp index 5d7127c1..c2fa81c1 100644 --- a/src/display.cpp +++ b/src/display.cpp @@ -4,23 +4,31 @@ Display-Mask (128 x 64 pixel): - | 111111 - |0123456789012345 ------------------- -0|PAX:aabbccddee -1|PAX:aabbccddee -2|B:a.bcV Sats:ab -3|BLTH:abcde SFab -4|WIFI:abcde ch:ab -5|RLIM:abcd abcdKB -6|20:27:00* 27.Feb -7|yyyyyyyyyyyyyyab + | | | + | 11111111112 + |012345678901234567890 Font +----------------------- --------- +0|PAX:aabbccdd STRETCHED +1|PAX:aabbccdd STRETCHED +2| +3|B:a.bcV Sats:ab ch:ab SMALL +4|WIFI:abcde BLTH:abcde SMALL +5|RLIM:abcd Mem:abcdKB SMALL +6|27.Feb 2019 20:27:00* SMALL +7|yyyyyyyyyyyyyyyy SFab SMALL -line 6: * = char {L|G|R|?} indicates time source, - inverse = clock controller is active, - pulsed = pps input signal is active +* = char {L|G|R|?} indicates time source, + inverse = clock controller is active, + pulsed = pps input signal is active -line 7: y = LMIC event message; ab = payload queue length +y = LMIC event message; ab = payload queue length + +FONTS in ss_oled.cpp: + +FONT_SMALL: 6px = 21 chars / line +FONT_NORMAL: 8px = 16 chars / line +FONT_STRETCHED: 8 chars / line +FONT_LARGE: 8 chars / line */ @@ -134,7 +142,7 @@ void draw_page(time_t t, uint8_t page) { static bool wasnofix = true; #endif - // update counter (lines 0-1) + // line 1/2: pax counter dp_printf(0, 0, FONT_STRETCHED, 0, "PAX:%-4d", (int)macs.size()); // display number of unique macs total Wifi + BLE @@ -147,82 +155,75 @@ void draw_page(time_t t, uint8_t page) { case 0: -// update Battery status (line 2) -#if (defined BAT_MEASURE_ADC || defined HAS_PMU) - if (batt_voltage == 0xffff) - dp_printf(0, 2, 0, 0, "%s", "B:USB "); - else - dp_printf(0, 2, 0, 0, "B:%.2fV", batt_voltage / 1000.0); -#endif - -// update GPS status (line 2) -#if (HAS_GPS) - if (gps.location.age() < 1500) // if no fix then display Sats value inverse - dp_printf(72, 2, 0, 0, "Sats:%.2d", gps.satellites.value()); - else - dp_printf(72, 2, 0, 1, "Sats:%.2d", gps.satellites.value()); -#endif - - // update bluetooth counter + LoRa SF (line 3) + // line 3: wifi + bluetooth counters + dp_printf(0, 3, FONT_SMALL, 0, "WIFI:%-5d", macs_wifi); #if (BLECOUNTER) if (cfg.blescan) - dp_printf(0, 3, 0, 0, "BLTH:%-5d", macs_ble); + dp_printf(66, 3, FONT_SMALL, 0, "BLTH:%-5d", macs_ble); else - dp_printf(0, 3, 0, 0, "%s", "BLTH:off"); + dp_printf(66, 3, FONT_SMALL, 0, "%s", "BLTH:off"); #endif -#if (HAS_LORA) - if (cfg.adrmode) - dp_printf(96, 3, 0, 0, "%-4s", getSfName(updr2rps(LMIC.datarate))); - else // if ADR=off then display SF value inverse - dp_printf(96, 3, 0, 1, "%-4s", getSfName(updr2rps(LMIC.datarate))); -#endif // HAS_LORA +// line 4: Battery + GPS status + Wifi channel +#if (defined BAT_MEASURE_ADC || defined HAS_PMU) + if (batt_voltage == 0xffff) + dp_printf(0, 4, FONT_SMALL, 0, "%s", "B:USB "); + else + dp_printf(0, 4, FONT_SMALL, 0, "B:%.2fV", batt_voltage / 1000.0); +#endif +#if (HAS_GPS) + if (gps.location.age() < 1500) // if no fix then display Sats value inverse + dp_printf(48, 4, FONT_SMALL, 0, "Sats:%.2d", gps.satellites.value()); + else + dp_printf(48, 4, FONT_SMALL, 1, "Sats:%.2d", gps.satellites.value()); +#endif + dp_printf(96, 4, FONT_SMALL, 0, "ch:%02d", channel); - // line 4: update wifi counter + channel display - dp_printf(0, 4, 0, 0, "WIFI:%-5d", macs_wifi); - dp_printf(88, 4, 0, 0, "ch:%02d", channel); - - // line 5: update RSSI limiter status & free memory display - dp_printf(0, 5, 0, 0, !cfg.rssilimit ? "RLIM:off " : "RLIM:%-4d", + // line 5: RSSI limiter + free memory + dp_printf(0, 5, FONT_SMALL, 0, !cfg.rssilimit ? "RLIM:off " : "RLIM:%-4d", cfg.rssilimit); - dp_printf(80, 5, 0, 0, "%4dKB", getFreeRAM() / 1024); + dp_printf(66, 5, FONT_SMALL, 0, "Mem:%4dKB", getFreeRAM() / 1024); - // line 6: update time-of-day or LoRa status display + // line 6: time + date #if (TIME_SYNC_INTERVAL) - // we want a systime display instead LoRa status timeState = TimePulseTick ? ' ' : timeSetSymbols[timeSource]; TimePulseTick = false; + + dp_printf(0, 6, FONT_SMALL, 0, "%02d.%3s %4d", day(t), printmonth[month(t)], + year(t)); + dp_printf(72, 6, FONT_SMALL, 0, "%02d:%02d:%02d", hour(t), minute(t), + second(t)); + // display inverse timeState if clock controller is enabled #if (defined HAS_DCF77) || (defined HAS_IF482) - dp_printf(0, 6, 0, 0, "%02d:%02d:%02d", hour(t), minute(t), second(t)); - dp_printf(56, 6, 0, 1, "%c", timeState); + dp_printf(120, 6, FONT_SMALL, 1, "%c", timeState); #else - dp_printf(0, 6, 0, 0, "%02d:%02d:%02d%c", hour(t), minute(t), second(t), - timeState); -#endif // HAS_DCF77 || HAS_IF482 - if (timeSource != _unsynced) - dp_printf(72, 6, 0, 0, " %2d.%3s", day(t), printmonth[month(t)]); + dp_printf(120, 6, FONT_SMALL, 0, "%c", timeState); +#endif #endif // TIME_SYNC_INTERVAL + // line 7: LORA network status #if (HAS_LORA) - // line 7: update LMiC event display - dp_printf(0, 7, FONT_SMALL, 0, "%-14s", lmic_event_msg); - - // update LoRa send queue display + // LMiC event display, display inverse if sendqueue not empty msgWaiting = uxQueueMessagesWaiting(LoraSendQueue); - if (msgWaiting) { - sprintf(buff, "%2d", msgWaiting); - dp_printf(112, 7, FONT_SMALL, 0, "%-2s", - msgWaiting == SEND_QUEUE_SIZE ? "<>" : buff); - } else - dp_printf(112, 7, FONT_SMALL, 0, " "); + if (msgWaiting) + dp_printf(0, 7, FONT_SMALL, 1, "%-17s", lmic_event_msg); + else + dp_printf(0, 7, FONT_SMALL, 0, "%-17s", lmic_event_msg); + // LORA datarate, display inverse if ADR disabled + if (cfg.adrmode) + dp_printf(108, 7, FONT_SMALL, 0, "%-4s", + getSfName(updr2rps(LMIC.datarate))); + else + dp_printf(108, 7, FONT_SMALL, 1, "%-4s", + getSfName(updr2rps(LMIC.datarate))); #endif // HAS_LORA break; // page0 case 1: - dp_printf(0, 4, FONT_STRETCHED, 0, "%02d:%02d:%02d", hour(t), minute(t), + dp_printf(0, 4, FONT_LARGE, 0, "%02d:%02d:%02d", hour(t), minute(t), second(t)); break; // page1 From ad6a7b3adeb79dcfc665732e791a52143ab58692 Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Fri, 27 Sep 2019 17:47:39 +0200 Subject: [PATCH 06/26] removed productname --- src/paxcounter.conf | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/src/paxcounter.conf b/src/paxcounter.conf index 79943454..334a3431 100644 --- a/src/paxcounter.conf +++ b/src/paxcounter.conf @@ -6,8 +6,6 @@ // // Note: After editing, before "build", use "clean" button in PlatformIO! -#define PRODUCTNAME "PAXCNT" - // Verbose enables serial output #define VERBOSE 1 // set to 0 to silence the device, for mute use build option @@ -18,7 +16,7 @@ // Set this to include BLE counting and vendor filter functions, or to switch off WIFI counting #define VENDORFILTER 1 // set to 0 if you want to count things, not people -#define BLECOUNTER 0 // set it to 1 if you want to use BLE count, at expense of power & memory +#define BLECOUNTER 1 // set it to 1 if you want to use BLE count, at expense of power & memory #define WIFICOUNTER 1 // set it to 0 if you want to switch off WIFI count // BLE scan parameters From 8cb5bbab54b96df20e13bb4203d2a625b97c90f6 Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Fri, 27 Sep 2019 17:57:19 +0200 Subject: [PATCH 07/26] removed productname --- include/display.h | 2 +- src/display.cpp | 2 +- src/main.cpp | 4 ++-- src/paxcounter.conf | 6 ++---- 4 files changed, 6 insertions(+), 8 deletions(-) diff --git a/include/display.h b/include/display.h index 90ea3f38..0431bd8b 100644 --- a/include/display.h +++ b/include/display.h @@ -5,7 +5,7 @@ extern uint8_t DisplayIsOn; -void init_display(const char *Productname, const char *Version); +void init_display(void); void refreshTheDisplay(bool nextPage = false); void draw_page(time_t t, uint8_t page); void dp_printf(int x, int y, int font, int inv, const char *format, ...); diff --git a/src/display.cpp b/src/display.cpp index c2fa81c1..4e35d615 100644 --- a/src/display.cpp +++ b/src/display.cpp @@ -46,7 +46,7 @@ const char *printmonth[] = {"xxx", "Jan", "Feb", "Mar", "Apr", "May", "Jun", uint8_t DisplayIsOn = 0; -void init_display(const char *Productname, const char *Version) { +void init_display(void) { // block i2c bus access if (!I2C_MUTEX_LOCK()) diff --git a/src/main.cpp b/src/main.cpp index 91741688..908313e8 100644 --- a/src/main.cpp +++ b/src/main.cpp @@ -129,7 +129,7 @@ void setup() { esp_log_level_set("*", ESP_LOG_NONE); #endif - ESP_LOGI(TAG, "Starting %s v%s", PRODUCTNAME, PROGVERSION); + ESP_LOGI(TAG, "Starting Software v%s", PROGVERSION); // print chip information on startup if in verbose mode #if (VERBOSE) @@ -200,7 +200,7 @@ void setup() { #ifdef HAS_DISPLAY strcat_P(features, " OLED"); DisplayIsOn = cfg.screenon; - init_display(PRODUCTNAME, PROGVERSION); // note: blocking call + init_display(); // note: blocking call #endif #ifdef BOARD_HAS_PSRAM diff --git a/src/paxcounter.conf b/src/paxcounter.conf index 79943454..2fabde60 100644 --- a/src/paxcounter.conf +++ b/src/paxcounter.conf @@ -6,8 +6,6 @@ // // Note: After editing, before "build", use "clean" button in PlatformIO! -#define PRODUCTNAME "PAXCNT" - // Verbose enables serial output #define VERBOSE 1 // set to 0 to silence the device, for mute use build option @@ -18,7 +16,7 @@ // Set this to include BLE counting and vendor filter functions, or to switch off WIFI counting #define VENDORFILTER 1 // set to 0 if you want to count things, not people -#define BLECOUNTER 0 // set it to 1 if you want to use BLE count, at expense of power & memory +#define BLECOUNTER 1 // set it to 1 if you want to use BLE count, at expense of power & memory #define WIFICOUNTER 1 // set it to 0 if you want to switch off WIFI count // BLE scan parameters @@ -76,7 +74,7 @@ #define TIME_SYNC_INTERVAL_RETRY 10 // retry time sync after lost sync each .. minutes [default = 10], 0 means off #define TIME_SYNC_COMPILEDATE 0 // set to 1 to use compile date to initialize RTC after power outage [default = 0] #define TIME_SYNC_LORAWAN 0 // set to 1 to use LORA network as time source, 0 means off [default = 0] -#define TIME_SYNC_LORASERVER 1 // set to 1 to use LORA timeserver as time source, 0 means off [default = 0] +#define TIME_SYNC_LORASERVER 0 // set to 1 to use LORA timeserver as time source, 0 means off [default = 0] // settings for syncing time with timeserver applications #define TIME_SYNC_SAMPLES 1 // number of time requests for averaging From c6c455b922ec92dd328e42921ed3547b1276430a Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Sun, 29 Sep 2019 16:46:48 +0200 Subject: [PATCH 08/26] QR display of DEVEUI (experimental) --- include/display.h | 5 +++- src/display.cpp | 58 +++++++++++++++++++++++++++++++++++------------ 2 files changed, 47 insertions(+), 16 deletions(-) diff --git a/include/display.h b/include/display.h index 0431bd8b..fe1fd995 100644 --- a/include/display.h +++ b/include/display.h @@ -2,12 +2,15 @@ #define _DISPLAY_H #include "cyclic.h" +#include "qrcode.h" extern uint8_t DisplayIsOn; -void init_display(void); void refreshTheDisplay(bool nextPage = false); +void init_display(void); void draw_page(time_t t, uint8_t page); void dp_printf(int x, int y, int font, int inv, const char *format, ...); +void dp_printqr(int offset_x, int offset_y, const char *Message); +void oledfillRect(int x, int y, int width, int height, int bRender); #endif \ No newline at end of file diff --git a/src/display.cpp b/src/display.cpp index 4e35d615..ed2f26dd 100644 --- a/src/display.cpp +++ b/src/display.cpp @@ -23,12 +23,9 @@ Display-Mask (128 x 64 pixel): y = LMIC event message; ab = payload queue length -FONTS in ss_oled.cpp: - -FONT_SMALL: 6px = 21 chars / line -FONT_NORMAL: 8px = 16 chars / line -FONT_STRETCHED: 8 chars / line -FONT_LARGE: 8 chars / line +FONT_SMALL: 6x8px = 21 chars / line +FONT_NORMAL: 8x8px = 16 chars / line +FONT_STRETCHED: 16x32px = 8 chars / line */ @@ -37,15 +34,26 @@ FONT_LARGE: 8 chars / line #include #include // needed for reading ESP32 chip attributes +// local Tag for logging +static const char TAG[] = __FILE__; + +// settings for oled display library #define DISPLAY_PAGES (4) // number of display pages #define USE_BACKBUFFER // for display library +// settings for qr code generator +#define ELEMENT_SIZE 3 +#define QR_VERSION 1 +#define LOCK_VERSION 1 + // helper arry for converting month values to text const char *printmonth[] = {"xxx", "Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"}; uint8_t DisplayIsOn = 0; +QRCode qrcode; + void init_display(void) { // block i2c bus access @@ -78,23 +86,29 @@ void init_display(void) { dp_printf(0, 3, 0, 0, "%dMB %s Flash", spi_flash_get_chip_size() / (1024 * 1024), (chip_info.features & CHIP_FEATURE_EMB_FLASH) ? "int." : "ext."); + dp_printf(0, 4, 0, 0, "Software v%s", PROGVERSION); #endif // VERBOSE #if (HAS_LORA) - uint8_t buf[34]; + // generate and show DEVEUI + uint8_t buf[8]; const uint8_t *p; os_getDevEui((u1_t *)buf); - dp_printf(0, 5, 0, 0, "DEVEUI:"); + dp_printf(0, 6, 0, 0, "DEVEUI:"); for (uint8_t i = 0; i < 8; i++) { p = buf + 7 - i; - dp_printf(i * 16, 6, 0, 0, "%02X", *p); + dp_printf(i * 16, 7, 0, 0, "%02X", *p); } -#endif // HAS_LORA - - dp_printf(0, 4, 0, 0, "Software v%s", PROGVERSION); delay(3000); + oledFill(0x00, 1); - oledFill(0, 1); + // print DEVEUI as QR code + const char *eui = reinterpret_cast(buf); + dp_printqr(0, 0, eui); // to come: we need inverted display for QR code + +#endif // HAS_LOR + delay(3000); + oledFill(0x00, 1); oledPower(cfg.screenon); // set display off if disabled I2C_MUTEX_UNLOCK(); // release i2c bus access @@ -281,8 +295,7 @@ void draw_page(time_t t, uint8_t page) { } // draw_page -// display print helper function - +// display print helper functions void dp_printf(int x, int y, int font, int inv, const char *format, ...) { char loc_buf[64]; char *temp = loc_buf; @@ -311,4 +324,19 @@ void dp_printf(int x, int y, int font, int inv, const char *format, ...) { } } +void dp_printqr(int offset_x, int offset_y, const char *Message) { + uint8_t qrcodeData[qrcode_getBufferSize(1)]; + qrcode_initText(&qrcode, qrcodeData, QR_VERSION, ECC_HIGH, Message); + for (int y = 0; y < qrcode.size; y++) + for (int x = 0; x < qrcode.size; x++) + if (qrcode_getModule(&qrcode, x, y)) // BLACK + oledfillRect(x * ELEMENT_SIZE + offset_x, y * ELEMENT_SIZE + offset_y, + ELEMENT_SIZE, ELEMENT_SIZE, true); +} + +void oledfillRect(int x, int y, int width, int height, int bRender) { + for (int xi = x; xi < x + width; xi++) + oledDrawLine(xi, y, xi, y + height - 1, bRender); +} + #endif // HAS_DISPLAY \ No newline at end of file From 8b42cd3e3d8b437cfaaf71aab362094e4fbb1560 Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Sun, 29 Sep 2019 17:38:16 +0200 Subject: [PATCH 09/26] QR display (experimental) --- src/display.cpp | 41 +++++++++++++++++++++++++++++------------ 1 file changed, 29 insertions(+), 12 deletions(-) diff --git a/src/display.cpp b/src/display.cpp index ed2f26dd..ec5ee33f 100644 --- a/src/display.cpp +++ b/src/display.cpp @@ -42,8 +42,8 @@ static const char TAG[] = __FILE__; #define USE_BACKBUFFER // for display library // settings for qr code generator -#define ELEMENT_SIZE 3 -#define QR_VERSION 1 +#define QR_VERSION 3 // 29 x 29px +#define QR_SCALEFACTOR 2 // 29 -> 58x < 64px #define LOCK_VERSION 1 // helper arry for converting month values to text @@ -94,21 +94,36 @@ void init_display(void) { uint8_t buf[8]; const uint8_t *p; os_getDevEui((u1_t *)buf); - dp_printf(0, 6, 0, 0, "DEVEUI:"); + dp_printf(0, 6, 0, 1, "LORAWAN DEVEUI: "); for (uint8_t i = 0; i < 8; i++) { p = buf + 7 - i; - dp_printf(i * 16, 7, 0, 0, "%02X", *p); + dp_printf(i * 16, 7, 0, 1, "%02X", *p); } delay(3000); oledFill(0x00, 1); +// we need to invert display to show QR code +#ifndef DISPLAY_FLIP + oledInit(OLED_128x64, ANGLE_0, true, -1, -1, 400000L); +#else + oledInit(OLED_128x64, ANGLE_FLIPY, true, -1, -1, 400000L); +#endif + // print DEVEUI as QR code const char *eui = reinterpret_cast(buf); - dp_printqr(0, 0, eui); // to come: we need inverted display for QR code - -#endif // HAS_LOR - delay(3000); + dp_printqr(3, 3, eui); + delay(300000); oledFill(0x00, 1); + + // display back to normal +#ifndef DISPLAY_FLIP + oledInit(OLED_128x64, ANGLE_0, true, -1, -1, 400000L); +#else + oledInit(OLED_128x64, ANGLE_FLIPY, true, -1, -1, 400000L); +#endif + +#endif // HAS_LORA + oledPower(cfg.screenon); // set display off if disabled I2C_MUTEX_UNLOCK(); // release i2c bus access @@ -325,13 +340,15 @@ void dp_printf(int x, int y, int font, int inv, const char *format, ...) { } void dp_printqr(int offset_x, int offset_y, const char *Message) { - uint8_t qrcodeData[qrcode_getBufferSize(1)]; + uint8_t qrcodeData[qrcode_getBufferSize(QR_VERSION)]; qrcode_initText(&qrcode, qrcodeData, QR_VERSION, ECC_HIGH, Message); for (int y = 0; y < qrcode.size; y++) for (int x = 0; x < qrcode.size; x++) - if (qrcode_getModule(&qrcode, x, y)) // BLACK - oledfillRect(x * ELEMENT_SIZE + offset_x, y * ELEMENT_SIZE + offset_y, - ELEMENT_SIZE, ELEMENT_SIZE, true); + if (qrcode_getModule(&qrcode, x, y)) // "black" + oledfillRect(x * QR_SCALEFACTOR + offset_x, + y * QR_SCALEFACTOR + offset_y, QR_SCALEFACTOR, + QR_SCALEFACTOR, true); + oledfillRect(64, 0, 64, 64, true); // clear white space beneath qr code } void oledfillRect(int x, int y, int width, int height, int bRender) { From 899c8315b4daa4363842338e00918a1950bcd1d9 Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Sun, 29 Sep 2019 23:16:36 +0200 Subject: [PATCH 10/26] DEVEUI QR code display --- src/display.cpp | 66 +++++++++++++++++++++++++++---------------------- 1 file changed, 36 insertions(+), 30 deletions(-) diff --git a/src/display.cpp b/src/display.cpp index ec5ee33f..1ab38f99 100644 --- a/src/display.cpp +++ b/src/display.cpp @@ -86,42 +86,37 @@ void init_display(void) { dp_printf(0, 3, 0, 0, "%dMB %s Flash", spi_flash_get_chip_size() / (1024 * 1024), (chip_info.features & CHIP_FEATURE_EMB_FLASH) ? "int." : "ext."); - dp_printf(0, 4, 0, 0, "Software v%s", PROGVERSION); + dp_printf(0, 5, 0, 0, "Software v%s", PROGVERSION); + + // give user some time to read or take picture + delay(2000); + oledFill(0x00, 1); #endif // VERBOSE #if (HAS_LORA) - // generate and show DEVEUI + // generate DEVEUI as QR code and text uint8_t buf[8]; const uint8_t *p; os_getDevEui((u1_t *)buf); - dp_printf(0, 6, 0, 1, "LORAWAN DEVEUI: "); - for (uint8_t i = 0; i < 8; i++) { - p = buf + 7 - i; - dp_printf(i * 16, 7, 0, 1, "%02X", *p); - } + + // display DEVEUI as QR code on the left + char converted[17]; + sprintf(converted, "%016llX", *((uint64_t *)&buf)); + oledSetContrast(20); + dp_printqr(3, 3, converted); + + // display DEVEUI as plain text on the right + dp_printf(72, 0, FONT_NORMAL, 0, "LORAWAN"); + dp_printf(72, 1, FONT_NORMAL, 0, "DEVEUI:"); + dp_printf(80, 3, FONT_NORMAL, 0, "%4.4s", converted); + dp_printf(80, 4, FONT_NORMAL, 0, "%4.4s", converted + 4); + dp_printf(80, 5, FONT_NORMAL, 0, "%4.4s", converted + 8); + dp_printf(80, 6, FONT_NORMAL, 0, "%4.4s", converted + 12); + + // give user some time to read or take picture delay(3000); + oledSetContrast(255); oledFill(0x00, 1); - -// we need to invert display to show QR code -#ifndef DISPLAY_FLIP - oledInit(OLED_128x64, ANGLE_0, true, -1, -1, 400000L); -#else - oledInit(OLED_128x64, ANGLE_FLIPY, true, -1, -1, 400000L); -#endif - - // print DEVEUI as QR code - const char *eui = reinterpret_cast(buf); - dp_printqr(3, 3, eui); - delay(300000); - oledFill(0x00, 1); - - // display back to normal -#ifndef DISPLAY_FLIP - oledInit(OLED_128x64, ANGLE_0, true, -1, -1, 400000L); -#else - oledInit(OLED_128x64, ANGLE_FLIPY, true, -1, -1, 400000L); -#endif - #endif // HAS_LORA oledPower(cfg.screenon); // set display off if disabled @@ -342,13 +337,24 @@ void dp_printf(int x, int y, int font, int inv, const char *format, ...) { void dp_printqr(int offset_x, int offset_y, const char *Message) { uint8_t qrcodeData[qrcode_getBufferSize(QR_VERSION)]; qrcode_initText(&qrcode, qrcodeData, QR_VERSION, ECC_HIGH, Message); + + // draw QR code for (int y = 0; y < qrcode.size; y++) for (int x = 0; x < qrcode.size; x++) - if (qrcode_getModule(&qrcode, x, y)) // "black" + if (!qrcode_getModule(&qrcode, x, y)) // "black" oledfillRect(x * QR_SCALEFACTOR + offset_x, y * QR_SCALEFACTOR + offset_y, QR_SCALEFACTOR, QR_SCALEFACTOR, true); - oledfillRect(64, 0, 64, 64, true); // clear white space beneath qr code + // draw horizontal frame lines + oledfillRect(0, 0, qrcode.size * QR_SCALEFACTOR + 2 * offset_x, offset_y, + true); + oledfillRect(0, qrcode.size * QR_SCALEFACTOR + offset_y, + qrcode.size * QR_SCALEFACTOR + 2 * offset_x, offset_y, true); + // draw vertical frame lines + oledfillRect(0, 0, offset_x, qrcode.size * QR_SCALEFACTOR + 2 * offset_y, + true); + oledfillRect(qrcode.size * QR_SCALEFACTOR + offset_x, 0, offset_x, + qrcode.size * QR_SCALEFACTOR + 2 * offset_y, true); } void oledfillRect(int x, int y, int width, int height, int bRender) { From 55874f8b43ec122841d004972eb0890aec6d6b0f Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Sun, 29 Sep 2019 23:24:13 +0200 Subject: [PATCH 11/26] startup screen --- src/display.cpp | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/src/display.cpp b/src/display.cpp index 1ab38f99..ead88d30 100644 --- a/src/display.cpp +++ b/src/display.cpp @@ -78,15 +78,17 @@ void init_display(void) { #if (VERBOSE) esp_chip_info_t chip_info; esp_chip_info(&chip_info); - dp_printf(0, 0, 0, 0, "ESP32 %d cores", chip_info.cores); - dp_printf(0, 2, 0, 0, "Chip Rev.%d", chip_info.revision); - dp_printf(0, 1, 0, 0, "WiFi%s%s", + dp_printf(0, 0, 0, 0, "** PAXCOUNTER **"); + dp_printf(0, 1, 0, 0, "Software v%s", PROGVERSION); + dp_printf(0, 3, 0, 0, "ESP32 %d cores", chip_info.cores); + dp_printf(0, 4, 0, 0, "Chip Rev.%d", chip_info.revision); + dp_printf(0, 5, 0, 0, "WiFi%s%s", (chip_info.features & CHIP_FEATURE_BT) ? "/BT" : "", (chip_info.features & CHIP_FEATURE_BLE) ? "/BLE" : ""); - dp_printf(0, 3, 0, 0, "%dMB %s Flash", + dp_printf(0, 6, 0, 0, "%dMB %s Flash", spi_flash_get_chip_size() / (1024 * 1024), (chip_info.features & CHIP_FEATURE_EMB_FLASH) ? "int." : "ext."); - dp_printf(0, 5, 0, 0, "Software v%s", PROGVERSION); + // give user some time to read or take picture delay(2000); From 58ed680a92f6b38365ec2d70b6ce931dd114428e Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Mon, 30 Sep 2019 11:45:35 +0200 Subject: [PATCH 12/26] ota.cpp: WIFI response timeout added --- src/ota.cpp | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/src/ota.cpp b/src/ota.cpp index 91d28e11..6959792b 100644 --- a/src/ota.cpp +++ b/src/ota.cpp @@ -52,9 +52,9 @@ void start_ota_update() { // init display #ifndef DISPLAY_FLIP - int rc = oledInit(OLED_128x64, ANGLE_0, false, -1, -1, 100000L); + oledInit(OLED_128x64, ANGLE_0, false, -1, -1, 100000L); #else - int rc = oledInit(OLED_128x64, ANGLE_FLIPY, false, -1, -1, 100000L); + oledInit(OLED_128x64, ANGLE_FLIPY, false, -1, -1, 100000L); #endif oledFill(0, 1); @@ -157,7 +157,7 @@ int do_ota_update() { client.setCACert(bintray.getCertificate(currentHost)); client.setTimeout(RESPONSE_TIMEOUT_MS); - if (!client.connect(currentHost.c_str(), port)) { + if (!client.connect(currentHost.c_str(), port, RESPONSE_TIMEOUT_MS)) { ESP_LOGI(TAG, "Cannot connect to %s", currentHost.c_str()); ota_display(3, " E", "connection lost"); goto abort; @@ -167,7 +167,7 @@ int do_ota_update() { if (currentHost != prevHost) { client.stop(); client.setCACert(bintray.getCertificate(currentHost)); - if (!client.connect(currentHost.c_str(), port)) { + if (!client.connect(currentHost.c_str(), port, RESPONSE_TIMEOUT_MS)) { ESP_LOGI(TAG, "Redirect detected, but cannot connect to %s", currentHost.c_str()); ota_display(3, " E", "server error"); From c93b0867a9fd3153ab6be1026f2f2c39d8e51a5c Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Mon, 30 Sep 2019 12:35:03 +0200 Subject: [PATCH 13/26] AXP192 low level I2C mutexing --- include/power.h | 2 + src/power.cpp | 212 +++++++++++++++++++++++++++--------------------- 2 files changed, 121 insertions(+), 93 deletions(-) diff --git a/include/power.h b/include/power.h index 1ef571e1..1af87f09 100644 --- a/include/power.h +++ b/include/power.h @@ -19,6 +19,8 @@ void power_event_IRQ(void); void AXP192_power(bool on); void AXP192_init(void); void AXP192_showstatus(void); +uint8_t i2c_writeBytes(uint8_t addr, uint8_t reg, uint8_t *data, uint8_t len); +uint8_t i2c_readBytes(uint8_t addr, uint8_t reg, uint8_t *data, uint8_t len); #endif // HAS_PMU #endif \ No newline at end of file diff --git a/src/power.cpp b/src/power.cpp index 6b7f1f5e..7d29d5b4 100644 --- a/src/power.cpp +++ b/src/power.cpp @@ -11,48 +11,41 @@ AXP20X_Class pmu; void power_event_IRQ(void) { - if (!I2C_MUTEX_LOCK()) - ESP_LOGW(TAG, "[%0.3f] i2c mutex lock failed", millis() / 1000.0); - else { + pmu.readIRQ(); - pmu.readIRQ(); - // put your power event handler code here + if (pmu.isVbusOverVoltageIRQ()) + ESP_LOGI(TAG, "USB voltage %.2fV too high.", pmu.getVbusVoltage() / 1000); + if (pmu.isVbusPlugInIRQ()) + ESP_LOGI(TAG, "USB plugged, %.2fV @ %.0mA", pmu.getVbusVoltage() / 1000, + pmu.getVbusCurrent()); + if (pmu.isVbusRemoveIRQ()) + ESP_LOGI(TAG, "USB unplugged."); - if (pmu.isVbusOverVoltageIRQ()) - ESP_LOGI(TAG, "USB voltage %.2fV too high.", pmu.getVbusVoltage() / 1000); - if (pmu.isVbusPlugInIRQ()) - ESP_LOGI(TAG, "USB plugged, %.2fV @ %.0mA", pmu.getVbusVoltage() / 1000, - pmu.getVbusCurrent()); - if (pmu.isVbusRemoveIRQ()) - ESP_LOGI(TAG, "USB unplugged."); + if (pmu.isBattPlugInIRQ()) + ESP_LOGI(TAG, "Battery is connected."); + if (pmu.isBattRemoveIRQ()) + ESP_LOGI(TAG, "Battery was removed."); + if (pmu.isChargingIRQ()) + ESP_LOGI(TAG, "Battery charging."); + if (pmu.isChargingDoneIRQ()) + ESP_LOGI(TAG, "Battery charging done."); + if (pmu.isBattTempLowIRQ()) + ESP_LOGI(TAG, "Battery high temperature."); + if (pmu.isBattTempHighIRQ()) + ESP_LOGI(TAG, "Battery low temperature."); - if (pmu.isBattPlugInIRQ()) - ESP_LOGI(TAG, "Battery is connected."); - if (pmu.isBattRemoveIRQ()) - ESP_LOGI(TAG, "Battery was removed."); - if (pmu.isChargingIRQ()) - ESP_LOGI(TAG, "Battery charging."); - if (pmu.isChargingDoneIRQ()) - ESP_LOGI(TAG, "Battery charging done."); - if (pmu.isBattTempLowIRQ()) - ESP_LOGI(TAG, "Battery high temperature."); - if (pmu.isBattTempHighIRQ()) - ESP_LOGI(TAG, "Battery low temperature."); + // display on/off + if (pmu.isPEKShortPressIRQ()) { + cfg.screenon = !cfg.screenon; + } - // display on/off - if (pmu.isPEKShortPressIRQ()) { - cfg.screenon = !cfg.screenon; - } + // shutdown power + if (pmu.isPEKLongtPressIRQ()) { + AXP192_power(false); // switch off Lora, GPS, display + pmu.shutdown(); + } - // shutdown power - if (pmu.isPEKLongtPressIRQ()) { - AXP192_power(false); // switch off Lora, GPS, display - pmu.shutdown(); - } - - pmu.clearIRQ(); - I2C_MUTEX_UNLOCK(); - } // mutex + pmu.clearIRQ(); // refresh stored voltage value read_voltage(); @@ -75,70 +68,103 @@ void AXP192_power(bool on) { void AXP192_showstatus(void) { - if (!I2C_MUTEX_LOCK()) - ESP_LOGW(TAG, "[%0.3f] i2c mutex lock failed", millis() / 1000.0); - else { - - if (pmu.isBatteryConnect()) - if (pmu.isChargeing()) - ESP_LOGI(TAG, "Battery charging, %.2fV @ %.0fmAh", - pmu.getBattVoltage() / 1000, pmu.getBattChargeCurrent()); - else - ESP_LOGI(TAG, "Battery not charging"); + if (pmu.isBatteryConnect()) + if (pmu.isChargeing()) + ESP_LOGI(TAG, "Battery charging, %.2fV @ %.0fmAh", + pmu.getBattVoltage() / 1000, pmu.getBattChargeCurrent()); else - ESP_LOGI(TAG, "No Battery"); + ESP_LOGI(TAG, "Battery not charging"); + else + ESP_LOGI(TAG, "No Battery"); - if (pmu.isVBUSPlug()) - ESP_LOGI(TAG, "USB powered, %.0fmW", - pmu.getVbusVoltage() / 1000 * pmu.getVbusCurrent()); - else - ESP_LOGI(TAG, "USB not present"); - - I2C_MUTEX_UNLOCK(); - } // mutex + if (pmu.isVBUSPlug()) + ESP_LOGI(TAG, "USB powered, %.0fmW", + pmu.getVbusVoltage() / 1000 * pmu.getVbusCurrent()); + else + ESP_LOGI(TAG, "USB not present"); } void AXP192_init(void) { - // block i2c bus access - if (I2C_MUTEX_LOCK()) { + if (pmu.begin(i2c_readBytes, i2c_writeBytes, AXP192_PRIMARY_ADDRESS) == AXP_FAIL) + ESP_LOGI(TAG, "AXP192 PMU initialization failed"); + else { - if (pmu.begin(Wire, AXP192_PRIMARY_ADDRESS)) - ESP_LOGI(TAG, "AXP192 PMU initialization failed"); - else { + // configure AXP192 + pmu.setDCDC1Voltage(3300); // for external OLED display + pmu.setTimeOutShutdown(false); // no automatic shutdown + pmu.setTSmode(AXP_TS_PIN_MODE_DISABLE); // TS pin mode off to save power - // configure AXP192 - pmu.setDCDC1Voltage(3300); // for external OLED display - pmu.setTimeOutShutdown(false); // no automatic shutdown - pmu.setTSmode(AXP_TS_PIN_MODE_DISABLE); // TS pin mode off to save power + // switch ADCs on + pmu.adc1Enable(AXP202_BATT_VOL_ADC1, true); + pmu.adc1Enable(AXP202_BATT_CUR_ADC1, true); + pmu.adc1Enable(AXP202_VBUS_VOL_ADC1, true); + pmu.adc1Enable(AXP202_VBUS_CUR_ADC1, true); - // switch ADCs on - pmu.adc1Enable(AXP202_BATT_VOL_ADC1, true); - pmu.adc1Enable(AXP202_BATT_CUR_ADC1, true); - pmu.adc1Enable(AXP202_VBUS_VOL_ADC1, true); - pmu.adc1Enable(AXP202_VBUS_CUR_ADC1, true); + // switch power rails on + AXP192_power(true); - // switch power rails on - AXP192_power(true); - - // I2C access of AXP202X library currently is not mutexable - // so we better should disable AXP interrupts... ? #ifdef PMU_INT - pinMode(PMU_INT, INPUT_PULLUP); - attachInterrupt(digitalPinToInterrupt(PMU_INT), PMUIRQ, FALLING); - pmu.enableIRQ(AXP202_VBUS_REMOVED_IRQ | AXP202_VBUS_CONNECT_IRQ | - AXP202_BATT_REMOVED_IRQ | AXP202_BATT_CONNECT_IRQ | - AXP202_CHARGING_FINISHED_IRQ, - 1); - pmu.clearIRQ(); + pinMode(PMU_INT, INPUT_PULLUP); + attachInterrupt(digitalPinToInterrupt(PMU_INT), PMUIRQ, FALLING); + pmu.enableIRQ(AXP202_VBUS_REMOVED_IRQ | AXP202_VBUS_CONNECT_IRQ | + AXP202_BATT_REMOVED_IRQ | AXP202_BATT_CONNECT_IRQ | + AXP202_CHARGING_FINISHED_IRQ, + 1); + pmu.clearIRQ(); #endif // PMU_INT - ESP_LOGI(TAG, "AXP192 PMU initialized"); - } - I2C_MUTEX_UNLOCK(); // release i2c bus access - } else - ESP_LOGE(TAG, "I2c bus busy - PMU initialization error"); + ESP_LOGI(TAG, "AXP192 PMU initialized"); + } } + +// helper functions for mutexing i2c access +uint8_t i2c_readBytes(uint8_t addr, uint8_t reg, uint8_t *data, uint8_t len) { + if (I2C_MUTEX_LOCK()) { + + uint8_t ret = 0; + Wire.beginTransmission(addr); + Wire.write(reg); + Wire.endTransmission(false); + uint8_t cnt = Wire.requestFrom(addr, (uint8_t)len, (uint8_t)1); + if (!cnt) { + ret = 0xFF; + } + uint16_t index = 0; + while (Wire.available()) { + if (index > len) + return 0xFF; + data[index++] = Wire.read(); + } + + I2C_MUTEX_UNLOCK(); // release i2c bus access + return ret; + } else { + ESP_LOGW(TAG, "[%0.3f] i2c mutex lock failed", millis() / 1000.0); + return 0xFF; + } +} + +uint8_t i2c_writeBytes(uint8_t addr, uint8_t reg, uint8_t *data, uint8_t len) { + if (I2C_MUTEX_LOCK()) { + + uint8_t ret = 0; + Wire.beginTransmission(addr); + Wire.write(reg); + for (uint16_t i = 0; i < len; i++) { + Wire.write(data[i]); + } + ret = Wire.endTransmission(); + + I2C_MUTEX_UNLOCK(); // release i2c bus access + return ret ? 0xFF : ret; + //return ret ? ret : 0xFF; + } else { + ESP_LOGW(TAG, "[%0.3f] i2c mutex lock failed", millis() / 1000.0); + return 0xFF; + } +} + #endif // HAS_PMU #ifdef BAT_MEASURE_ADC @@ -196,12 +222,12 @@ uint16_t read_voltage() { uint16_t voltage = 0; #ifdef HAS_PMU - if (!I2C_MUTEX_LOCK()) - ESP_LOGW(TAG, "[%0.3f] i2c mutex lock failed", millis() / 1000.0); - else { - voltage = pmu.isVBUSPlug() ? 0xffff : pmu.getBattVoltage(); - I2C_MUTEX_UNLOCK(); - } + // if (!I2C_MUTEX_LOCK()) + // ESP_LOGW(TAG, "[%0.3f] i2c mutex lock failed", millis() / 1000.0); + // else { + voltage = pmu.isVBUSPlug() ? 0xffff : pmu.getBattVoltage(); + // I2C_MUTEX_UNLOCK(); + // } #else #ifdef BAT_MEASURE_ADC From 8cbac9c79f18dbe57eac751522b0ea136ebdc3d4 Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Mon, 30 Sep 2019 12:36:13 +0200 Subject: [PATCH 14/26] speedup display (use pagemode & i2c 400khz) --- src/display.cpp | 41 +++++++++++++++++++++-------------------- src/main.cpp | 4 ++-- src/ota.cpp | 4 ++-- 3 files changed, 25 insertions(+), 24 deletions(-) diff --git a/src/display.cpp b/src/display.cpp index ead88d30..6a3b5e47 100644 --- a/src/display.cpp +++ b/src/display.cpp @@ -44,7 +44,6 @@ static const char TAG[] = __FILE__; // settings for qr code generator #define QR_VERSION 3 // 29 x 29px #define QR_SCALEFACTOR 2 // 29 -> 58x < 64px -#define LOCK_VERSION 1 // helper arry for converting month values to text const char *printmonth[] = {"xxx", "Jan", "Feb", "Mar", "Apr", "May", "Jun", @@ -69,6 +68,7 @@ void init_display(void) { #endif // clear display + oledSetContrast(DISPLAYCONTRAST); oledFill(0, 1); // show startup screen @@ -88,9 +88,9 @@ void init_display(void) { dp_printf(0, 6, 0, 0, "%dMB %s Flash", spi_flash_get_chip_size() / (1024 * 1024), (chip_info.features & CHIP_FEATURE_EMB_FLASH) ? "int." : "ext."); - // give user some time to read or take picture + oledDumpBuffer(NULL); delay(2000); oledFill(0x00, 1); #endif // VERBOSE @@ -98,26 +98,26 @@ void init_display(void) { #if (HAS_LORA) // generate DEVEUI as QR code and text uint8_t buf[8]; - const uint8_t *p; + char deveui[17]; os_getDevEui((u1_t *)buf); + sprintf(deveui, "%016llX", *((uint64_t *)&buf)); // display DEVEUI as QR code on the left - char converted[17]; - sprintf(converted, "%016llX", *((uint64_t *)&buf)); - oledSetContrast(20); - dp_printqr(3, 3, converted); + oledSetContrast(30); + dp_printqr(3, 3, deveui); // display DEVEUI as plain text on the right dp_printf(72, 0, FONT_NORMAL, 0, "LORAWAN"); dp_printf(72, 1, FONT_NORMAL, 0, "DEVEUI:"); - dp_printf(80, 3, FONT_NORMAL, 0, "%4.4s", converted); - dp_printf(80, 4, FONT_NORMAL, 0, "%4.4s", converted + 4); - dp_printf(80, 5, FONT_NORMAL, 0, "%4.4s", converted + 8); - dp_printf(80, 6, FONT_NORMAL, 0, "%4.4s", converted + 12); + dp_printf(80, 3, FONT_NORMAL, 0, "%4.4s", deveui); + dp_printf(80, 4, FONT_NORMAL, 0, "%4.4s", deveui + 4); + dp_printf(80, 5, FONT_NORMAL, 0, "%4.4s", deveui + 8); + dp_printf(80, 6, FONT_NORMAL, 0, "%4.4s", deveui + 12); // give user some time to read or take picture - delay(3000); - oledSetContrast(255); + oledDumpBuffer(NULL); + delay(8000); + oledSetContrast(DISPLAYCONTRAST); oledFill(0x00, 1); #endif // HAS_LORA @@ -154,6 +154,7 @@ void refreshTheDisplay(bool nextPage) { } draw_page(t, DisplayPage); + oledDumpBuffer(NULL); I2C_MUTEX_UNLOCK(); // release i2c bus access @@ -162,7 +163,7 @@ void refreshTheDisplay(bool nextPage) { void draw_page(time_t t, uint8_t page) { - char timeState, buff[16]; + char timeState; uint8_t msgWaiting; #if (HAS_GPS) static bool wasnofix = true; @@ -330,7 +331,7 @@ void dp_printf(int x, int y, int font, int inv, const char *format, ...) { len = vsnprintf(temp, len + 1, format, arg); } va_end(arg); - oledWriteString(0, x, y, temp, font, inv, 1); + oledWriteString(0, x, y, temp, font, inv, false); if (temp != loc_buf) { free(temp); } @@ -346,17 +347,17 @@ void dp_printqr(int offset_x, int offset_y, const char *Message) { if (!qrcode_getModule(&qrcode, x, y)) // "black" oledfillRect(x * QR_SCALEFACTOR + offset_x, y * QR_SCALEFACTOR + offset_y, QR_SCALEFACTOR, - QR_SCALEFACTOR, true); + QR_SCALEFACTOR, false); // draw horizontal frame lines oledfillRect(0, 0, qrcode.size * QR_SCALEFACTOR + 2 * offset_x, offset_y, - true); + false); oledfillRect(0, qrcode.size * QR_SCALEFACTOR + offset_y, - qrcode.size * QR_SCALEFACTOR + 2 * offset_x, offset_y, true); + qrcode.size * QR_SCALEFACTOR + 2 * offset_x, offset_y, false); // draw vertical frame lines oledfillRect(0, 0, offset_x, qrcode.size * QR_SCALEFACTOR + 2 * offset_y, - true); + false); oledfillRect(qrcode.size * QR_SCALEFACTOR + offset_x, 0, offset_x, - qrcode.size * QR_SCALEFACTOR + 2 * offset_y, true); + qrcode.size * QR_SCALEFACTOR + 2 * offset_y, false); } void oledfillRect(int x, int y, int width, int height, int bRender) { diff --git a/src/main.cpp b/src/main.cpp index 908313e8..a23b2b52 100644 --- a/src/main.cpp +++ b/src/main.cpp @@ -172,9 +172,9 @@ void setup() { // open i2c bus #ifdef HAS_DISPLAY - Wire.begin(MY_OLED_SDA, MY_OLED_SCL, 100000); + Wire.begin(MY_OLED_SDA, MY_OLED_SCL, 400000); #else - Wire.begin(SDA, SCL, 100000); + Wire.begin(SDA, SCL, 400000); #endif // setup power on boards with power management logic diff --git a/src/ota.cpp b/src/ota.cpp index 6959792b..416a4d93 100644 --- a/src/ota.cpp +++ b/src/ota.cpp @@ -52,9 +52,9 @@ void start_ota_update() { // init display #ifndef DISPLAY_FLIP - oledInit(OLED_128x64, ANGLE_0, false, -1, -1, 100000L); + oledInit(OLED_128x64, ANGLE_0, false, -1, -1, 400000L); #else - oledInit(OLED_128x64, ANGLE_FLIPY, false, -1, -1, 100000L); + oledInit(OLED_128x64, ANGLE_FLIPY, false, -1, -1, 400000L); #endif oledFill(0, 1); From d58e8a11db9ef25f52d1553cddcf01c03e31f86a Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Mon, 30 Sep 2019 15:05:30 +0200 Subject: [PATCH 15/26] paxcounter.conf: add DISPLAYCONTRAST --- src/paxcounter.conf | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/src/paxcounter.conf b/src/paxcounter.conf index 2fabde60..21340850 100644 --- a/src/paxcounter.conf +++ b/src/paxcounter.conf @@ -55,6 +55,7 @@ // Hardware settings #define RGBLUMINOSITY 30 // RGB LED luminosity [default = 30%] #define DISPLAYREFRESH_MS 40 // OLED refresh cycle in ms [default = 40] -> 1000/40 = 25 frames per second +#define DISPLAYCONTRAST 80 // 0 .. 255, OLED display contrast [default = 80] #define HOMECYCLE 30 // house keeping cycle in seconds [default = 30 secs] // Settings for BME680 environmental sensor @@ -74,7 +75,7 @@ #define TIME_SYNC_INTERVAL_RETRY 10 // retry time sync after lost sync each .. minutes [default = 10], 0 means off #define TIME_SYNC_COMPILEDATE 0 // set to 1 to use compile date to initialize RTC after power outage [default = 0] #define TIME_SYNC_LORAWAN 0 // set to 1 to use LORA network as time source, 0 means off [default = 0] -#define TIME_SYNC_LORASERVER 0 // set to 1 to use LORA timeserver as time source, 0 means off [default = 0] +#define TIME_SYNC_LORASERVER 0 // set to 1 to use LORA timeserver as time source, 0 means off [default = 0] // settings for syncing time with timeserver applications #define TIME_SYNC_SAMPLES 1 // number of time requests for averaging From 449d681c7b33ab5c3a4592c8520afa4d7989fc42 Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Mon, 30 Sep 2019 19:44:49 +0200 Subject: [PATCH 16/26] LEDmatrixdisplay.cpp/.h rename scrollfunction --- include/ledmatrixdisplay.h | 2 +- src/ledmatrixdisplay.cpp | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/include/ledmatrixdisplay.h b/include/ledmatrixdisplay.h index b7ec5a3b..b2863146 100644 --- a/include/ledmatrixdisplay.h +++ b/include/ledmatrixdisplay.h @@ -13,6 +13,6 @@ void refreshTheMatrixDisplay(bool nextPage = false); void DrawNumber(String strNum, uint8_t iDotPos = 0); uint8_t GetCharFromFont(char cChar); uint8_t GetCharWidth(char cChar); -void ScrollLeft(uint8_t *buf, const uint16_t cols, const uint16_t rows); +void ScrollMatrixLeft(uint8_t *buf, const uint16_t cols, const uint16_t rows); #endif \ No newline at end of file diff --git a/src/ledmatrixdisplay.cpp b/src/ledmatrixdisplay.cpp index 881f57fe..e33ea6e0 100644 --- a/src/ledmatrixdisplay.cpp +++ b/src/ledmatrixdisplay.cpp @@ -94,7 +94,7 @@ void refreshTheMatrixDisplay(bool nextPage) { if (col < (LED_MATRIX_WIDTH - 1)) col++; else - ScrollLeft(displaybuf, LED_MATRIX_WIDTH, LED_MATRIX_HEIGHT); + ScrollMatrixLeft(displaybuf, LED_MATRIX_WIDTH, LED_MATRIX_HEIGHT); } else matrix.drawPoint(col, row, 0); // clear current dot @@ -204,7 +204,7 @@ uint8_t GetCharWidth(char cChar) { return CharDescriptor.width; } -void ScrollLeft(uint8_t *buf, const uint16_t cols, const uint16_t rows) { +void ScrollMatrixLeft(uint8_t *buf, const uint16_t cols, const uint16_t rows) { uint32_t i, k, idx; const uint32_t x = cols / 8; From e38a91162b9b670b12df95a07bfefafe3b51bb50 Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Mon, 30 Sep 2019 19:45:31 +0200 Subject: [PATCH 17/26] no startup screen while rebooting to OTA --- src/main.cpp | 2 +- src/ota.cpp | 10 +++++----- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/src/main.cpp b/src/main.cpp index a23b2b52..79b692ef 100644 --- a/src/main.cpp +++ b/src/main.cpp @@ -200,7 +200,7 @@ void setup() { #ifdef HAS_DISPLAY strcat_P(features, " OLED"); DisplayIsOn = cfg.screenon; - init_display(); // note: blocking call + init_display(!cfg.runmode); // note: blocking call #endif #ifdef BOARD_HAS_PSRAM diff --git a/src/ota.cpp b/src/ota.cpp index 416a4d93..f27b4a8c 100644 --- a/src/ota.cpp +++ b/src/ota.cpp @@ -48,15 +48,13 @@ void start_ota_update() { switch_LED(LED_ON); -#ifdef HAS_DISPLAY - // init display +#ifdef HAS_DISPLAY #ifndef DISPLAY_FLIP oledInit(OLED_128x64, ANGLE_0, false, -1, -1, 400000L); #else oledInit(OLED_128x64, ANGLE_FLIPY, false, -1, -1, 400000L); #endif - oledFill(0, 1); dp_printf(0, 0, 0, 1, "SOFTWARE UPDATE"); dp_printf(0, 1, 0, 0, "WiFi connect .."); @@ -64,6 +62,7 @@ void start_ota_update() { dp_printf(0, 3, 0, 0, "Fetching .."); dp_printf(0, 4, 0, 0, "Downloading .."); dp_printf(0, 5, 0, 0, "Rebooting .."); + oledDumpBuffer(NULL); #endif ESP_LOGI(TAG, "Starting Wifi OTA update"); @@ -157,7 +156,7 @@ int do_ota_update() { client.setCACert(bintray.getCertificate(currentHost)); client.setTimeout(RESPONSE_TIMEOUT_MS); - if (!client.connect(currentHost.c_str(), port, RESPONSE_TIMEOUT_MS)) { + if (!client.connect(currentHost.c_str(), port)) { ESP_LOGI(TAG, "Cannot connect to %s", currentHost.c_str()); ota_display(3, " E", "connection lost"); goto abort; @@ -167,7 +166,7 @@ int do_ota_update() { if (currentHost != prevHost) { client.stop(); client.setCACert(bintray.getCertificate(currentHost)); - if (!client.connect(currentHost.c_str(), port, RESPONSE_TIMEOUT_MS)) { + if (!client.connect(currentHost.c_str(), port)) { ESP_LOGI(TAG, "Redirect detected, but cannot connect to %s", currentHost.c_str()); ota_display(3, " E", "server error"); @@ -316,6 +315,7 @@ void ota_display(const uint8_t row, const std::string status, dp_printf(0, 7, 0, 0, " "); dp_printf(0, 7, 0, 0, msg.substr(0, 16).c_str()); } + oledDumpBuffer(NULL); #endif } From 66af2b8c545dfd3282dca3b93e9389904bd42c67 Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Tue, 1 Oct 2019 13:02:30 +0200 Subject: [PATCH 18/26] pax curve plotter (experimental) --- README.md | 8 +- include/display.h | 15 +++- src/display.cpp | 200 +++++++++++++++++++++++++++++++++------------- 3 files changed, 163 insertions(+), 60 deletions(-) diff --git a/README.md b/README.md index eaea51cd..96ef762d 100644 --- a/README.md +++ b/README.md @@ -150,7 +150,13 @@ Paxcounter generates identifiers for sniffed MAC adresses and collects them temp # Display -If you're using a device with OLED display, or if you add such one to the I2C bus, the device shows live data on the display. You can flip between pages showing pax, time, GPS and BME sensor data by pressing the button of the device. +If you're using a device with OLED display, or if you add such one to the I2C bus, the device shows live data on the display. You can flip display pages showing +- recent count of pax +- histogram +- GPS data +- BME sensor data +- Time of day +by pressing the button of the device. # Sensors and Peripherals diff --git a/include/display.h b/include/display.h index fe1fd995..a2a20eff 100644 --- a/include/display.h +++ b/include/display.h @@ -7,10 +7,17 @@ extern uint8_t DisplayIsOn; void refreshTheDisplay(bool nextPage = false); -void init_display(void); +void init_display(uint8_t verbose = 0); void draw_page(time_t t, uint8_t page); -void dp_printf(int x, int y, int font, int inv, const char *format, ...); -void dp_printqr(int offset_x, int offset_y, const char *Message); -void oledfillRect(int x, int y, int width, int height, int bRender); +void dp_printf(uint16_t x, uint16_t y, uint8_t font, uint8_t inv, + const char *format, ...); +void dp_printqr(uint16_t offset_x, uint16_t offset_y, const char *Message); +void oledfillRect(uint16_t x, uint16_t y, uint16_t width, uint16_t height, + uint8_t bRender); +void oledScrollBufferLeft(uint8_t *buf, const uint16_t width, + const uint16_t height); +int oledDrawPixel(uint8_t *buf, const uint16_t x, const uint16_t y, + const uint8_t dot); +void oledPlotCurve(uint16_t count); #endif \ No newline at end of file diff --git a/src/display.cpp b/src/display.cpp index 6a3b5e47..8b7564e1 100644 --- a/src/display.cpp +++ b/src/display.cpp @@ -37,23 +37,29 @@ FONT_STRETCHED: 16x32px = 8 chars / line // local Tag for logging static const char TAG[] = __FILE__; +#define DISPLAY_PAGES (5) // number of paxcounter display pages + // settings for oled display library -#define DISPLAY_PAGES (4) // number of display pages -#define USE_BACKBUFFER // for display library +#define USE_BACKBUFFER // settings for qr code generator #define QR_VERSION 3 // 29 x 29px #define QR_SCALEFACTOR 2 // 29 -> 58x < 64px -// helper arry for converting month values to text +// settings for curve plotter +#define PLOT_SCALEFACTOR 1 // downscales pax numbers to display rows +#define DISPLAY_WIDTH 128 // Width in pixels of OLED-display, must be 32X +#define DISPLAY_HEIGHT 64 // Height in pixels of OLED-display, must be 16X + +// helper array for converting month values to text const char *printmonth[] = {"xxx", "Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"}; - uint8_t DisplayIsOn = 0; +uint8_t displaybuf[DISPLAY_WIDTH * DISPLAY_HEIGHT / 8] = {0}; QRCode qrcode; -void init_display(void) { +void init_display(uint8_t verbose) { // block i2c bus access if (!I2C_MUTEX_LOCK()) @@ -71,56 +77,61 @@ void init_display(void) { oledSetContrast(DISPLAYCONTRAST); oledFill(0, 1); - // show startup screen - // to come -> display .bmp file with logo + if (verbose) { + + // show startup screen + // to come -> display .bmp file with logo // show chip information #if (VERBOSE) - esp_chip_info_t chip_info; - esp_chip_info(&chip_info); - dp_printf(0, 0, 0, 0, "** PAXCOUNTER **"); - dp_printf(0, 1, 0, 0, "Software v%s", PROGVERSION); - dp_printf(0, 3, 0, 0, "ESP32 %d cores", chip_info.cores); - dp_printf(0, 4, 0, 0, "Chip Rev.%d", chip_info.revision); - dp_printf(0, 5, 0, 0, "WiFi%s%s", - (chip_info.features & CHIP_FEATURE_BT) ? "/BT" : "", - (chip_info.features & CHIP_FEATURE_BLE) ? "/BLE" : ""); - dp_printf(0, 6, 0, 0, "%dMB %s Flash", - spi_flash_get_chip_size() / (1024 * 1024), - (chip_info.features & CHIP_FEATURE_EMB_FLASH) ? "int." : "ext."); + esp_chip_info_t chip_info; + esp_chip_info(&chip_info); + dp_printf(0, 0, 0, 0, "** PAXCOUNTER **"); + dp_printf(0, 1, 0, 0, "Software v%s", PROGVERSION); + dp_printf(0, 3, 0, 0, "ESP32 %d cores", chip_info.cores); + dp_printf(0, 4, 0, 0, "Chip Rev.%d", chip_info.revision); + dp_printf(0, 5, 0, 0, "WiFi%s%s", + (chip_info.features & CHIP_FEATURE_BT) ? "/BT" : "", + (chip_info.features & CHIP_FEATURE_BLE) ? "/BLE" : ""); + dp_printf(0, 6, 0, 0, "%dMB %s Flash", + spi_flash_get_chip_size() / (1024 * 1024), + (chip_info.features & CHIP_FEATURE_EMB_FLASH) ? "int." + : "ext."); - // give user some time to read or take picture - oledDumpBuffer(NULL); - delay(2000); - oledFill(0x00, 1); + // give user some time to read or take picture + oledDumpBuffer(NULL); + delay(2000); + oledFill(0x00, 1); #endif // VERBOSE #if (HAS_LORA) - // generate DEVEUI as QR code and text - uint8_t buf[8]; - char deveui[17]; - os_getDevEui((u1_t *)buf); - sprintf(deveui, "%016llX", *((uint64_t *)&buf)); + // generate DEVEUI as QR code and text + uint8_t buf[8]; + char deveui[17]; + os_getDevEui((u1_t *)buf); + sprintf(deveui, "%016llX", *((uint64_t *)&buf)); - // display DEVEUI as QR code on the left - oledSetContrast(30); - dp_printqr(3, 3, deveui); + // display DEVEUI as QR code on the left + oledSetContrast(30); + dp_printqr(3, 3, deveui); - // display DEVEUI as plain text on the right - dp_printf(72, 0, FONT_NORMAL, 0, "LORAWAN"); - dp_printf(72, 1, FONT_NORMAL, 0, "DEVEUI:"); - dp_printf(80, 3, FONT_NORMAL, 0, "%4.4s", deveui); - dp_printf(80, 4, FONT_NORMAL, 0, "%4.4s", deveui + 4); - dp_printf(80, 5, FONT_NORMAL, 0, "%4.4s", deveui + 8); - dp_printf(80, 6, FONT_NORMAL, 0, "%4.4s", deveui + 12); + // display DEVEUI as plain text on the right + dp_printf(72, 0, FONT_NORMAL, 0, "LORAWAN"); + dp_printf(72, 1, FONT_NORMAL, 0, "DEVEUI:"); + dp_printf(80, 3, FONT_NORMAL, 0, "%4.4s", deveui); + dp_printf(80, 4, FONT_NORMAL, 0, "%4.4s", deveui + 4); + dp_printf(80, 5, FONT_NORMAL, 0, "%4.4s", deveui + 8); + dp_printf(80, 6, FONT_NORMAL, 0, "%4.4s", deveui + 12); - // give user some time to read or take picture - oledDumpBuffer(NULL); - delay(8000); - oledSetContrast(DISPLAYCONTRAST); - oledFill(0x00, 1); + // give user some time to read or take picture + oledDumpBuffer(NULL); + delay(8000); + oledSetContrast(DISPLAYCONTRAST); + oledFill(0x00, 1); #endif // HAS_LORA + } // verbose + oledPower(cfg.screenon); // set display off if disabled I2C_MUTEX_UNLOCK(); // release i2c bus access @@ -171,15 +182,20 @@ void draw_page(time_t t, uint8_t page) { // line 1/2: pax counter dp_printf(0, 0, FONT_STRETCHED, 0, "PAX:%-4d", - (int)macs.size()); // display number of unique macs total Wifi + BLE + macs.size()); // display number of unique macs total Wifi + BLE + + // update histogram if we have a display + oledPlotCurve(macs.size()); switch (page % DISPLAY_PAGES) { // page 0: parameters overview - // page 1: time + // page 1: pax graph // page 2: GPS // page 3: BME280/680 + // page 4: time + // page 0: parameters overview case 0: // line 3: wifi + bluetooth counters @@ -194,7 +210,9 @@ void draw_page(time_t t, uint8_t page) { // line 4: Battery + GPS status + Wifi channel #if (defined BAT_MEASURE_ADC || defined HAS_PMU) if (batt_voltage == 0xffff) - dp_printf(0, 4, FONT_SMALL, 0, "%s", "B:USB "); + dp_printf(0, 4, FONT_SMALL, 0, "%s", "USB "); + else if (batt_voltage == 0) + dp_printf(0, 4, FONT_SMALL, 0, "%s", "No batt"); else dp_printf(0, 4, FONT_SMALL, 0, "B:%.2fV", batt_voltage / 1000.0); #endif @@ -249,11 +267,12 @@ void draw_page(time_t t, uint8_t page) { break; // page0 + // page 1: pax graph case 1: - dp_printf(0, 4, FONT_LARGE, 0, "%02d:%02d:%02d", hour(t), minute(t), - second(t)); + oledDumpBuffer(displaybuf); break; // page1 + // page 2: GPS case 2: #if (HAS_GPS) if (gps.location.age() < 1500) { @@ -281,6 +300,7 @@ void draw_page(time_t t, uint8_t page) { break; // page2 + // page 3: BME280/680 case 3: #if (HAS_BME) @@ -301,6 +321,13 @@ void draw_page(time_t t, uint8_t page) { break; // page3 + // page 4: time + case 4: + + dp_printf(0, 4, FONT_LARGE, 0, "%02d:%02d:%02d", hour(t), minute(t), + second(t)); + break; + default: break; // default @@ -308,8 +335,9 @@ void draw_page(time_t t, uint8_t page) { } // draw_page -// display print helper functions -void dp_printf(int x, int y, int font, int inv, const char *format, ...) { +// display helper functions +void dp_printf(uint16_t x, uint16_t y, uint8_t font, uint8_t inv, + const char *format, ...) { char loc_buf[64]; char *temp = loc_buf; va_list arg; @@ -337,13 +365,13 @@ void dp_printf(int x, int y, int font, int inv, const char *format, ...) { } } -void dp_printqr(int offset_x, int offset_y, const char *Message) { +void dp_printqr(uint16_t offset_x, uint16_t offset_y, const char *Message) { uint8_t qrcodeData[qrcode_getBufferSize(QR_VERSION)]; qrcode_initText(&qrcode, qrcodeData, QR_VERSION, ECC_HIGH, Message); // draw QR code - for (int y = 0; y < qrcode.size; y++) - for (int x = 0; x < qrcode.size; x++) + for (uint16_t y = 0; y < qrcode.size; y++) + for (uint16_t x = 0; x < qrcode.size; x++) if (!qrcode_getModule(&qrcode, x, y)) // "black" oledfillRect(x * QR_SCALEFACTOR + offset_x, y * QR_SCALEFACTOR + offset_y, QR_SCALEFACTOR, @@ -360,9 +388,71 @@ void dp_printqr(int offset_x, int offset_y, const char *Message) { qrcode.size * QR_SCALEFACTOR + 2 * offset_y, false); } -void oledfillRect(int x, int y, int width, int height, int bRender) { - for (int xi = x; xi < x + width; xi++) +void oledfillRect(uint16_t x, uint16_t y, uint16_t width, uint16_t height, + uint8_t bRender) { + for (uint16_t xi = x; xi < x + width; xi++) oledDrawLine(xi, y, xi, y + height - 1, bRender); } +int oledDrawPixel(uint8_t *buf, const uint16_t x, const uint16_t y, + const uint8_t dot) { + + uint8_t page, bit; + + if (x > DISPLAY_WIDTH || y > DISPLAY_HEIGHT) + return -1; + + page = y / 8; + bit = y % 8; + + if (dot) + buf[page * DISPLAY_WIDTH + x] |= (1 << bit); // mark + else + buf[page * DISPLAY_WIDTH + x] &= ~(0 << bit); // clear + + return 0; +} + +void oledScrollBufferLeft(uint8_t *buf, const uint16_t width, + const uint16_t height) { + + uint16_t col, page, idx; + + for (page = 0; page < height / 8; page++) { + for (col = 0; col < width - 1; col++) { + idx = page * width + col; + buf[idx] = buf[idx + 1]; + } + buf[idx + 1] = 0; + } +} + +void oledPlotCurve(uint16_t count) { + + uint8_t level; + static uint16_t last_count = 0, col = 0, row = 0; + + if (last_count == count) + return; + + // next count cycle? + if (count == 0) { + + // matrix full? then scroll left 1 dot, else increment column + if (col < DISPLAY_WIDTH - 1) + col++; + else + oledScrollBufferLeft(displaybuf, DISPLAY_WIDTH, DISPLAY_HEIGHT); + + } else + oledDrawPixel(displaybuf, col, row, 0); // clear current dot + + // scale and set new dot + last_count = count; + level = count / PLOT_SCALEFACTOR; + row = + level <= DISPLAY_HEIGHT ? DISPLAY_HEIGHT - 1 - level % DISPLAY_HEIGHT : 0; + oledDrawPixel(displaybuf, col, row, 1); +} + #endif // HAS_DISPLAY \ No newline at end of file From be01760c32a00276e2d7c9f526b97d7e1b249743 Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Tue, 1 Oct 2019 13:35:05 +0200 Subject: [PATCH 19/26] pax curve plotter --- src/display.cpp | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/src/display.cpp b/src/display.cpp index 8b7564e1..9662dc3f 100644 --- a/src/display.cpp +++ b/src/display.cpp @@ -397,18 +397,15 @@ void oledfillRect(uint16_t x, uint16_t y, uint16_t width, uint16_t height, int oledDrawPixel(uint8_t *buf, const uint16_t x, const uint16_t y, const uint8_t dot) { - uint8_t page, bit; - if (x > DISPLAY_WIDTH || y > DISPLAY_HEIGHT) return -1; - page = y / 8; - bit = y % 8; + uint8_t bit = y & 7; + uint16_t idx = y / 8 * DISPLAY_WIDTH + x; + buf[idx] &= ~(1 << bit); // clear pixel if (dot) - buf[page * DISPLAY_WIDTH + x] |= (1 << bit); // mark - else - buf[page * DISPLAY_WIDTH + x] &= ~(0 << bit); // clear + buf[idx] |= (1 << bit); // set pixel return 0; } From bae583934a9591ff9a6ecfa05b6b8e444b0e0328 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Oliver=20Brandm=C3=BCller?= Date: Tue, 1 Oct 2019 15:44:12 +0200 Subject: [PATCH 20/26] add oled library to platformio.ini --- platformio.ini | 1 + 1 file changed, 1 insertion(+) diff --git a/platformio.ini b/platformio.ini index ded8baf9..a8f69ac1 100644 --- a/platformio.ini +++ b/platformio.ini @@ -59,6 +59,7 @@ lib_deps_lora = lib_deps_display = ss_oled@>=2.1.1 BitBang_I2C@>=1.2.0 + QRCode@>=0.0.1 lib_deps_matrix_display = https://github.com/Seeed-Studio/Ultrathin_LED_Matrix.git lib_deps_rgbled = From 0440e536dde6835aee727ef2c12742a997633b20 Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Tue, 1 Oct 2019 18:06:49 +0200 Subject: [PATCH 21/26] scalefactor for curve plotter --- include/cyclic.h | 5 +++++ include/display.h | 2 +- include/senddata.h | 7 ++++++- src/cyclic.cpp | 4 ++++ src/display.cpp | 41 +++++++++++++++++++++-------------------- src/senddata.cpp | 4 ++++ 6 files changed, 41 insertions(+), 22 deletions(-) diff --git a/include/cyclic.h b/include/cyclic.h index b9512c53..4b402360 100644 --- a/include/cyclic.h +++ b/include/cyclic.h @@ -5,6 +5,7 @@ #include "senddata.h" #include "rcommand.h" #include "spislave.h" + #if(HAS_LORA) #include #endif @@ -13,6 +14,10 @@ #include "bmesensor.h" #endif +#ifdef HAS_DISPLAY +#include "display.h" +#endif + extern Ticker housekeeper; void housekeeping(void); diff --git a/include/display.h b/include/display.h index a2a20eff..7c90a968 100644 --- a/include/display.h +++ b/include/display.h @@ -18,6 +18,6 @@ void oledScrollBufferLeft(uint8_t *buf, const uint16_t width, const uint16_t height); int oledDrawPixel(uint8_t *buf, const uint16_t x, const uint16_t y, const uint8_t dot); -void oledPlotCurve(uint16_t count); +void oledPlotCurve(uint16_t count, bool reset); #endif \ No newline at end of file diff --git a/include/senddata.h b/include/senddata.h index 4a748445..0151f7e2 100644 --- a/include/senddata.h +++ b/include/senddata.h @@ -2,10 +2,15 @@ #define _SENDDATA_H #include "spislave.h" +#include "cyclic.h" + #if(HAS_LORA) #include "lorawan.h" #endif -#include "cyclic.h" + +#ifdef HAS_DISPLAY +#include "display.h" +#endif extern Ticker sendcycler; diff --git a/src/cyclic.cpp b/src/cyclic.cpp index ef2ce200..9b75ecef 100644 --- a/src/cyclic.cpp +++ b/src/cyclic.cpp @@ -128,5 +128,9 @@ void reset_counters() { macs_total = 0; // reset all counters macs_wifi = 0; macs_ble = 0; +#ifdef HAS_DISPLAY + oledPlotCurve(0, true); +#endif + #endif } \ No newline at end of file diff --git a/src/display.cpp b/src/display.cpp index 9662dc3f..01057745 100644 --- a/src/display.cpp +++ b/src/display.cpp @@ -47,9 +47,8 @@ static const char TAG[] = __FILE__; #define QR_SCALEFACTOR 2 // 29 -> 58x < 64px // settings for curve plotter -#define PLOT_SCALEFACTOR 1 // downscales pax numbers to display rows -#define DISPLAY_WIDTH 128 // Width in pixels of OLED-display, must be 32X -#define DISPLAY_HEIGHT 64 // Height in pixels of OLED-display, must be 16X +#define DISPLAY_WIDTH 128 // Width in pixels of OLED-display, must be 32X +#define DISPLAY_HEIGHT 64 // Height in pixels of OLED-display, must be 16X // helper array for converting month values to text const char *printmonth[] = {"xxx", "Jan", "Feb", "Mar", "Apr", "May", "Jun", @@ -185,7 +184,7 @@ void draw_page(time_t t, uint8_t page) { macs.size()); // display number of unique macs total Wifi + BLE // update histogram if we have a display - oledPlotCurve(macs.size()); + oledPlotCurve(macs.size(), false); switch (page % DISPLAY_PAGES) { @@ -424,31 +423,33 @@ void oledScrollBufferLeft(uint8_t *buf, const uint16_t width, } } -void oledPlotCurve(uint16_t count) { +void oledPlotCurve(uint16_t count, bool reset) { - uint8_t level; - static uint16_t last_count = 0, col = 0, row = 0; + static uint16_t last_count = 0, col = 0, row = 0, scalefactor = 1; - if (last_count == count) + if ((last_count == count) && !reset) return; - // next count cycle? - if (count == 0) { - - // matrix full? then scroll left 1 dot, else increment column - if (col < DISPLAY_WIDTH - 1) + if (reset) { // next count cycle? + if (col < DISPLAY_WIDTH - 1) // matrix not full -> increment column col++; - else + else // matrix full -> scroll left 1 dot oledScrollBufferLeft(displaybuf, DISPLAY_WIDTH, DISPLAY_HEIGHT); - } else - oledDrawPixel(displaybuf, col, row, 0); // clear current dot + } else // clear current dot + oledDrawPixel(displaybuf, col, row, 0); - // scale and set new dot + // re-scale, if necessary + while (((count / scalefactor) <= DISPLAY_HEIGHT) && (scalefactor > 1)) { + scalefactor--; + } + while ((count / scalefactor) > DISPLAY_HEIGHT) { + scalefactor++; + } + + // set new dot + row = DISPLAY_HEIGHT - 1 - (count / scalefactor) % DISPLAY_HEIGHT; last_count = count; - level = count / PLOT_SCALEFACTOR; - row = - level <= DISPLAY_HEIGHT ? DISPLAY_HEIGHT - 1 - level % DISPLAY_HEIGHT : 0; oledDrawPixel(displaybuf, col, row, 1); } diff --git a/src/senddata.cpp b/src/senddata.cpp index 76d412e2..11b0d81a 100644 --- a/src/senddata.cpp +++ b/src/senddata.cpp @@ -75,6 +75,10 @@ void sendData() { get_salt(); // get new salt for salting hashes ESP_LOGI(TAG, "Counter cleared"); } +#ifdef HAS_DISPLAY + else + oledPlotCurve(macs.size(), true); +#endif break; #endif From 1bf8898c4e9694464581283e811e43681cd35803 Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Tue, 1 Oct 2019 18:08:24 +0200 Subject: [PATCH 22/26] platformio.ini update --- platformio.ini | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/platformio.ini b/platformio.ini index ded8baf9..51fb94c8 100644 --- a/platformio.ini +++ b/platformio.ini @@ -7,7 +7,7 @@ ; ---> SELECT THE TARGET PLATFORM HERE! <--- [board] -halfile = generic.h +;halfile = generic.h ;halfile = ebox.h ;halfile = eboxtube.h ;halfile = ecopower.h @@ -18,7 +18,7 @@ halfile = generic.h ;halfile = ttgov21old.h ;halfile = ttgov21new.h ;halfile = ttgofox.h -;halfile = ttgobeam.h +halfile = ttgobeam.h ;halfile = ttgobeam10.h ;halfile = fipy.h ;halfile = lopy.h @@ -34,16 +34,16 @@ halfile = generic.h [platformio] ; upload firmware to board with usb cable -default_envs = usb +;default_envs = usb ; upload firmware to a jfrog bintray repository ;default_envs = ota ; use latest versions of libraries -;default_envs = dev +default_envs = dev description = Paxcounter is a device for metering passenger flows in realtime. It counts how many mobile devices are around. [common] ; for release_version use max. 10 chars total, use any decimal format like "a.b.c" -release_version = 1.8.4 +release_version = 1.8.5 ; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running! ; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose debug_level = 3 @@ -51,14 +51,15 @@ extra_scripts = pre:build.py otakeyfile = ota.conf lorakeyfile = loraconf.h lmicconfigfile = lmic_config.h -platform_espressif32 = espressif32@1.10.0 +platform_espressif32 = espressif32@1.9.0 monitor_speed = 115200 upload_speed = 115200 lib_deps_lora = MCCI LoRaWAN LMIC library@>=3.0.99 lib_deps_display = - ss_oled@>=2.1.1 + ss_oled@>=2.2.1 BitBang_I2C@>=1.2.0 + QRCode@>=0.0.1 lib_deps_matrix_display = https://github.com/Seeed-Studio/Ultrathin_LED_Matrix.git lib_deps_rgbled = @@ -67,14 +68,14 @@ lib_deps_gps = 1655@>=1.0.2 ;TinyGPSPlus by Mikal Hart lib_deps_sensors = Adafruit Unified Sensor@>=1.0.3 - Adafruit BME280 Library@>=1.0.9 + Adafruit BME280 Library@>=1.0.10 lib_deps_basic = ArduinoJson@^5.13.1 76@>=1.2.2 ;Timezone by Jack Christensen 274@>=2.3.3 ;RTC by Michael Miller SimpleButton - ;AXP202X_Library@^1.0.1 - https://github.com/lewisxhe/AXP202X_Library.git#8045ddf + ;AXP202X_Library@>=1.0.1 + https://github.com/lewisxhe/AXP202X_Library.git lib_deps_all = ${common.lib_deps_basic} ${common.lib_deps_lora} From 08c5a0ffe95a7e04d99c84f90d379a2bcde2b805 Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Fri, 4 Oct 2019 14:47:58 +0200 Subject: [PATCH 23/26] uploadspeed ebox.h & eboxtube.h --- src/hal/ebox.h | 2 +- src/hal/eboxtube.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/src/hal/ebox.h b/src/hal/ebox.h index ebd70136..6da29292 100644 --- a/src/hal/ebox.h +++ b/src/hal/ebox.h @@ -1,5 +1,5 @@ // clang-format off -// upload_speed 115200 +// upload_speed 921600 // board esp32dev #ifndef _EBOX_H diff --git a/src/hal/eboxtube.h b/src/hal/eboxtube.h index 34abe865..86a69d7d 100644 --- a/src/hal/eboxtube.h +++ b/src/hal/eboxtube.h @@ -1,5 +1,5 @@ // clang-format off -// upload_speed 115200 +// upload_speed 921600 // board esp32dev From c56c973534f912617cd4a772dd78449b8a0e28c9 Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Fri, 4 Oct 2019 15:47:33 +0200 Subject: [PATCH 24/26] curve plotter (experimental) --- include/display.h | 1 + src/display.cpp | 45 +++++++++++++++++++++++++++++++++++---------- 2 files changed, 36 insertions(+), 10 deletions(-) diff --git a/include/display.h b/include/display.h index 7c90a968..591814ba 100644 --- a/include/display.h +++ b/include/display.h @@ -19,5 +19,6 @@ void oledScrollBufferLeft(uint8_t *buf, const uint16_t width, int oledDrawPixel(uint8_t *buf, const uint16_t x, const uint16_t y, const uint8_t dot); void oledPlotCurve(uint16_t count, bool reset); +void oledRescaleBuffer(uint8_t *buf, const int factor); #endif \ No newline at end of file diff --git a/src/display.cpp b/src/display.cpp index 01057745..5770cabc 100644 --- a/src/display.cpp +++ b/src/display.cpp @@ -48,7 +48,7 @@ static const char TAG[] = __FILE__; // settings for curve plotter #define DISPLAY_WIDTH 128 // Width in pixels of OLED-display, must be 32X -#define DISPLAY_HEIGHT 64 // Height in pixels of OLED-display, must be 16X +#define DISPLAY_HEIGHT 64 // Height in pixels of OLED-display, must be 64X // helper array for converting month values to text const char *printmonth[] = {"xxx", "Jan", "Feb", "Mar", "Apr", "May", "Jun", @@ -252,15 +252,15 @@ void draw_page(time_t t, uint8_t page) { // LMiC event display, display inverse if sendqueue not empty msgWaiting = uxQueueMessagesWaiting(LoraSendQueue); if (msgWaiting) - dp_printf(0, 7, FONT_SMALL, 1, "%-17s", lmic_event_msg); + dp_printf(0, 7, FONT_SMALL, 1, "%-16s", lmic_event_msg); else - dp_printf(0, 7, FONT_SMALL, 0, "%-17s", lmic_event_msg); + dp_printf(0, 7, FONT_SMALL, 0, "%-16s", lmic_event_msg); // LORA datarate, display inverse if ADR disabled if (cfg.adrmode) - dp_printf(108, 7, FONT_SMALL, 0, "%-4s", + dp_printf(100, 7, FONT_SMALL, 0, "%-4s", getSfName(updr2rps(LMIC.datarate))); else - dp_printf(108, 7, FONT_SMALL, 1, "%-4s", + dp_printf(100, 7, FONT_SMALL, 1, "%-4s", getSfName(updr2rps(LMIC.datarate))); #endif // HAS_LORA @@ -425,7 +425,8 @@ void oledScrollBufferLeft(uint8_t *buf, const uint16_t width, void oledPlotCurve(uint16_t count, bool reset) { - static uint16_t last_count = 0, col = 0, row = 0, scalefactor = 1; + static uint16_t last_count = 0, col = 0, row = 0; + static int scalefactor = 1, oldsf = 1; if ((last_count == count) && !reset) return; @@ -440,12 +441,13 @@ void oledPlotCurve(uint16_t count, bool reset) { oledDrawPixel(displaybuf, col, row, 0); // re-scale, if necessary - while (((count / scalefactor) <= DISPLAY_HEIGHT) && (scalefactor > 1)) { + oldsf = scalefactor; + while (((count / scalefactor) <= DISPLAY_HEIGHT) && (scalefactor > 1)) scalefactor--; - } - while ((count / scalefactor) > DISPLAY_HEIGHT) { + while ((count / scalefactor) > DISPLAY_HEIGHT) scalefactor++; - } + if (scalefactor != oldsf) + oledRescaleBuffer(displaybuf, scalefactor); // set new dot row = DISPLAY_HEIGHT - 1 - (count / scalefactor) % DISPLAY_HEIGHT; @@ -453,4 +455,27 @@ void oledPlotCurve(uint16_t count, bool reset) { oledDrawPixel(displaybuf, col, row, 1); } +void oledRescaleBuffer(uint8_t *buf, const int factor) { + + if (!factor) + return; + + uint64_t buf_col; + + for (uint16_t col = 0; col < DISPLAY_WIDTH; col++) { + // convert column bytes from display buffer to uint64_t + buf_col = *(uint64_t *)&buf[col * DISPLAY_HEIGHT / 8]; + + if (factor < 0) + // shift left: scroll up = scale down + buf_col <= abs(factor); + else + // shift right: scroll down = scale up + buf_col >= abs(factor); + + // write back uint64_t to uint8_t display buffer + *(uint64_t *)&buf[col * DISPLAY_HEIGHT / 8] = buf_col; + } +} + #endif // HAS_DISPLAY \ No newline at end of file From 00761c77b37ae639bd7c65b0eb87684d7366e84f Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Fri, 4 Oct 2019 15:48:00 +0200 Subject: [PATCH 25/26] readme.md cleanup --- README.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/README.md b/README.md index 96ef762d..53f08126 100644 --- a/README.md +++ b/README.md @@ -318,8 +318,8 @@ Note: all settings are stored in NVRAM and will be reloaded when device starts. Example for EU868: DataRate Configuration Bit/s - 0 LoRa: SF12 / 125 kHz 250 - 1 LoRa: SF11 / 125 kHz 440 + 0 LoRa: SF12 / 125 kHz 250 + 1 LoRa: SF11 / 125 kHz 440 2 LoRa: SF10 / 125 kHz 980 3 LoRa: SF9 / 125 kHz 1760 4 LoRa: SF8 / 125 kHz 3125 From be8ce87a4a41a38f63bfc32da3f5ee1699871110 Mon Sep 17 00:00:00 2001 From: Verkehrsrot Date: Fri, 4 Oct 2019 15:49:22 +0200 Subject: [PATCH 26/26] platformio.ini: lib versions update --- platformio.ini | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/platformio.ini b/platformio.ini index 51fb94c8..1df56f70 100644 --- a/platformio.ini +++ b/platformio.ini @@ -7,7 +7,7 @@ ; ---> SELECT THE TARGET PLATFORM HERE! <--- [board] -;halfile = generic.h +halfile = generic.h ;halfile = ebox.h ;halfile = eboxtube.h ;halfile = ecopower.h @@ -18,7 +18,7 @@ ;halfile = ttgov21old.h ;halfile = ttgov21new.h ;halfile = ttgofox.h -halfile = ttgobeam.h +;halfile = ttgobeam.h ;halfile = ttgobeam10.h ;halfile = fipy.h ;halfile = lopy.h @@ -38,12 +38,12 @@ halfile = ttgobeam.h ; upload firmware to a jfrog bintray repository ;default_envs = ota ; use latest versions of libraries -default_envs = dev +default_envs = usb description = Paxcounter is a device for metering passenger flows in realtime. It counts how many mobile devices are around. [common] ; for release_version use max. 10 chars total, use any decimal format like "a.b.c" -release_version = 1.8.5 +release_version = 1.8.52 ; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running! ; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose debug_level = 3 @@ -57,7 +57,7 @@ upload_speed = 115200 lib_deps_lora = MCCI LoRaWAN LMIC library@>=3.0.99 lib_deps_display = - ss_oled@>=2.2.1 + ss_oled@>=3.0.0 BitBang_I2C@>=1.2.0 QRCode@>=0.0.1 lib_deps_matrix_display = @@ -74,8 +74,7 @@ lib_deps_basic = 76@>=1.2.2 ;Timezone by Jack Christensen 274@>=2.3.3 ;RTC by Michael Miller SimpleButton - ;AXP202X_Library@>=1.0.1 - https://github.com/lewisxhe/AXP202X_Library.git + AXP202X_Library@>=1.0.1 lib_deps_all = ${common.lib_deps_basic} ${common.lib_deps_lora}