beacon monitor mode implemented (EXPERIMENTAL, untested yet)

src/beacon_array.h

@@ -0,0 +1,5 @@
+std::array<uint32_t, 5>::iterator it;
+
+std::array<uint32_t, 5> beacons = {0x000000000000, 0x000000000000,
+                                   0x000000000000, 0x000000000000,
+                                   0x000000000000};

src/configmanager.cpp

@@ -30,6 +30,7 @@ void defaultConfig() {
   cfg.vendorfilter = 1;       // 0=disabled, 1=enabled
   cfg.rgblum = RGBLUMINOSITY; // RGB Led luminosity (0..100%)
   cfg.gpsmode = 1;            // 0=disabled, 1=enabled
+  cfg.monitormode = 0;        // 0=disabled, 1=enabled
 
   strncpy(cfg.version, PROGVERSION, sizeof(cfg.version) - 1);
 }
@@ -138,6 +139,10 @@ void saveConfig() {
         flash8 != cfg.gpsmode)
       nvs_set_i8(my_handle, "gpsmode", cfg.gpsmode);
 
+    if (nvs_get_i8(my_handle, "monitormode", &flash8) != ESP_OK ||
+        flash8 != cfg.monitormode)
+      nvs_set_i8(my_handle, "monitormode", cfg.monitormode);
+
     if (nvs_get_i16(my_handle, "rssilimit", &flash16) != ESP_OK ||
         flash16 != cfg.rssilimit)
       nvs_set_i16(my_handle, "rssilimit", cfg.rssilimit);
@@ -313,8 +318,15 @@ void loadConfig() {
       saveConfig();
     }
 
+    if (nvs_get_i8(my_handle, "monitormode", &flash8) == ESP_OK) {
+      cfg.monitormode = flash8;
+      ESP_LOGI(TAG, "Monitor mode = %d", flash8);
+    } else {
+      ESP_LOGI(TAG, "Monitor mode set to default %d", cfg.monitormode);
+      saveConfig();
+    }
+
     nvs_close(my_handle);
     ESP_LOGI(TAG, "Done");
-
   }
 } // loadConfig()

src/globals.h

@@ -8,7 +8,7 @@
 #include <esp32-hal-log.h>
 
 // attn: increment version after modifications to configData_t truct!
-#define PROGVERSION "1.3.94" // use max 10 chars here!
+#define PROGVERSION "1.3.95" // use max 10 chars here!
 #define PROGNAME "PAXCNT"
 
 // std::set for unified array functions
@@ -33,6 +33,7 @@ typedef struct {
   uint8_t vendorfilter;  // 0=disabled, 1=enabled
   uint8_t rgblum;        // RGB Led luminosity (0..100%)
   uint8_t gpsmode;       // 0=disabled, 1=enabled
+  uint8_t monitormode;   // 0=disabled, 1=enabled
   char version[10];      // Firmware version
 } configData_t;
 

src/macsniff.cpp

@@ -6,6 +6,9 @@
 #include "vendor_array.h"
 #endif
 
+#include "beacon_array.h"
+#include "senddata.h"
+
 // Local logging tag
 static const char TAG[] = "wifi";
 
@@ -27,12 +30,21 @@ uint16_t reset_salt(void) {
   return salt;
 }
 
+uint8_t isBeacon(uint32_t mac) {
+  it = std::find(beacons.begin(), beacons.end(), mac);
+  if (it != beacons.end())
+    return std::distance(beacons.begin(), it);
+  else
+    return 0;
+}
+
 bool mac_add(uint8_t *paddr, int8_t rssi, bool sniff_type) {
 
   char buff[16]; // temporary buffer for printf
   bool added = false;
   uint32_t addr2int, vendor2int; // temporary buffer for MAC and Vendor OUI
   uint16_t hashedmac;            // temporary buffer for generated hash value
+  uint8_t beacon = 0;            // beacon number in test monitor mode
 
   // only last 3 MAC Address bytes are used for MAC address anonymization
   // but since it's uint32 we take 4 bytes to avoid 1st value to be 0
@@ -51,6 +63,16 @@ bool mac_add(uint8_t *paddr, int8_t rssi, bool sniff_type) {
     // and increment counter on display
     // https://en.wikipedia.org/wiki/MAC_Address_Anonymization
 
+    // in test monitor mode check if MAC is a known beacon
+    if (cfg.monitormode) {
+      beacon = isBeacon(addr2int);
+      if (beacon) {
+        payload.reset();
+        payload.addAlarm(rssi, beacon);
+        senddata(BEACONPORT);
+      }
+    };
+
     addr2int += (uint32_t)salt; // add 16-bit salt to pseudo MAC
     snprintf(
         buff, sizeof(buff), "%08X",

src/main.cpp

@@ -45,10 +45,10 @@ portMUX_TYPE timerMux =
     portMUX_INITIALIZER_UNLOCKED; // sync main loop and ISR when modifying IRQ
                                   // handler shared variables
 
-std::set<uint16_t> macs; // associative container holds total of unique MAC
+std::set<uint16_t> macs; // associative container holding unique MAC
                          // adress hashes (Wifi + BLE)
 
-// initialize payload ncoder
+// initialize payload encoder
 PayloadConvert payload(PAYLOAD_BUFFER_SIZE);
 
 // local Tag for logging

src/paxcounter.conf

@@ -55,6 +55,7 @@
 #define BUTTONPORT                      5       // Port on which device sends button pressed signal
 #define LPP1PORT                        1       // Port for Cayenne LPP 1.0 dynamic sensor encoding
 #define LPP2PORT                        2       // Port for Cayenne LPP 2.0 packed sensor encoding
+#define BEACONPORT                      6       // Port on which device sends beacon alarms
 
 // Some hardware settings
 #define RGBLUMINOSITY                   30      // RGB LED luminosity [default = 30%]

src/payload.cpp

@@ -26,6 +26,11 @@ void PayloadConvert::addCount(uint16_t value1, uint16_t value2) {
   buffer[cursor++] = lowByte(value2);
 }
 
+void PayloadConvert::addAlarm(int8_t rssi, uint8_t msg) {
+  buffer[cursor++] = rssi;
+  buffer[cursor++] = msg;
+}
+
 void PayloadConvert::addConfig(configData_t value) {
   buffer[cursor++] = value.lorasf;
   buffer[cursor++] = value.txpower;
@@ -99,6 +104,11 @@ void PayloadConvert::addCount(uint16_t value1, uint16_t value2) {
   writeUint16(value2);
 }
 
+void PayloadConvert::addAlarm(int8_t rssi, uint8_t msg) {
+  writeUint8(rssi);
+  writeUint8(msg);
+}
+
 void PayloadConvert::addConfig(configData_t value) {
   writeUint8(value.lorasf);
   writeUint8(value.txpower);
@@ -207,6 +217,19 @@ void PayloadConvert::addCount(uint16_t value1, uint16_t value2) {
   buffer[cursor++] = lowByte(value2);
 }
 
+void PayloadConvert::addAlarm(int8_t rssi, uint8_t msg) {
+#if (PAYLOAD_ENCODER == 3)
+  buffer[cursor++] = LPP_ALARM_CHANNEL;
+#endif
+  buffer[cursor++] = LPP_PRESENCE;
+  buffer[cursor++] = msg;
+#if (PAYLOAD_ENCODER == 3)
+  buffer[cursor++] = LPP_MSG_CHANNEL;
+#endif
+  buffer[cursor++] = LPP_ANALOG_INPUT;
+  buffer[cursor++] = rssi;
+}
+
 void PayloadConvert::addConfig(configData_t value) {
 #if (PAYLOAD_ENCODER == 3)
   buffer[cursor++] = LPP_ADR_CHANNEL;

src/payload.h

@@ -11,6 +11,8 @@
 #define LPP_BUTTON_CHANNEL 24
 #define LPP_ADR_CHANNEL 25
 #define LPP_TEMP_CHANNEL 26
+#define LPP_ALARM_CHANNEL 27
+#define LPP_MSG_CHANNEL 28
 #endif
 
 // MyDevices CayenneLPP types
@@ -20,6 +22,7 @@
 #define LPP_DIGITAL_OUTPUT 1 // 1 byte
 #define LPP_ANALOG_INPUT 2   // 2 bytes, 0.01 signed
 #define LPP_LUMINOSITY 101   // 2 bytes, 1 lux unsigned
+#define LPP_Presence 102     //	1 byte
 
 class PayloadConvert {
 
@@ -33,6 +36,7 @@ public:
   void addCount(uint16_t value1, uint16_t value2);
   void addConfig(configData_t value);
   void addStatus(uint16_t voltage, uint64_t uptime, float cputemp);
+  void addAlarm(int8_t rssi, uint8_t message);
 #ifdef HAS_GPS
   void addGPS(gpsStatus_t value);
 #endif

src/rcommand.cpp

@@ -170,7 +170,7 @@ void set_display(uint8_t val) {
 };
 
 void set_gps(uint8_t val) {
-  ESP_LOGI(TAG, "Remote command: set GPS to %s", val ? "on" : "off");
+  ESP_LOGI(TAG, "Remote command: set GPS mode to %s", val ? "on" : "off");
   switch (val) {
   case 1:
     cfg.gpsmode = val;
@@ -181,6 +181,18 @@ void set_gps(uint8_t val) {
   }
 };
 
+void set_monitor(uint8_t val) {
+  ESP_LOGI(TAG, "Remote command: set Monitor mode to %s", val ? "on" : "off");
+  switch (val) {
+  case 1:
+    cfg.monitormode = val;
+    break;
+  default:
+    cfg.monitormode = 0;
+    break;
+  }
+};
+
 void set_lorasf(uint8_t val) {
 #ifdef HAS_LORA
   ESP_LOGI(TAG, "Remote command: set LoRa SF to %d", val);
@@ -312,8 +324,8 @@ cmd_t table[] = {{0x01, set_rssi, true},          {0x02, set_countmode, true},
                  {0x0b, set_wifichancycle, true}, {0x0c, set_blescantime, true},
                  {0x0d, set_vendorfilter, false}, {0x0e, set_blescan, true},
                  {0x0f, set_wifiant, true},       {0x10, set_rgblum, true},
-                 {0x80, get_config, false},       {0x81, get_status, false},
-                 {0x84, get_gps, false}};
+                 {0x11, set_monitor, true},       {0x80, get_config, false},
+                 {0x81, get_status, false},       {0x84, get_gps, false}};
 
 // check and execute remote command
 void rcommand(uint8_t cmd, uint8_t arg) {