BME680 bugfixes

src/bme680mems.cpp

@@ -23,12 +23,14 @@ bsec_virtual_sensor_t sensorList[10] = {
     BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_HUMIDITY,
 };
 
-uint8_t bsecState[BSEC_MAX_STATE_BLOB_SIZE] = {0};
+uint8_t bsecstate_buffer[BSEC_MAX_STATE_BLOB_SIZE] = {0};
 uint16_t stateUpdateCounter = 0;
 
 // initialize BME680 sensor
 int bme_init(void) {
-  
+
+  // return = 0 -> error / return = 1 -> success
+
   // block i2c bus access
   if (xSemaphoreTake(I2Caccess, (DISPLAYREFRESH_MS / portTICK_PERIOD_MS)) ==
       pdTRUE) {
@@ -46,7 +48,7 @@ int bme_init(void) {
       ESP_LOGI(TAG, "BME680 sensor found and initialized");
     else {
       ESP_LOGE(TAG, "BME680 sensor not found");
-      return 1;
+      goto error;
     }
 
     loadState();
@@ -58,16 +60,21 @@ int bme_init(void) {
       ESP_LOGI(TAG, "BSEC subscription succesful");
     else {
       ESP_LOGE(TAG, "BSEC subscription error");
-      return 1;
+      goto error;
     }
 
-    xSemaphoreGive(I2Caccess); // release i2c bus access
-
   } else {
     ESP_LOGE(TAG, "I2c bus busy - BME680 initialization error");
-    return 1;
+    goto error;
   }
 
+  xSemaphoreGive(I2Caccess); // release i2c bus access
+  return 1;
+
+error:
+  xSemaphoreGive(I2Caccess); // release i2c bus access
+  return 0;
+
 } // bme_init()
 
 // Helper function definitions
@@ -128,8 +135,8 @@ void loadState(void) {
   if (cfg.bsecstate[BSEC_MAX_STATE_BLOB_SIZE + 1] == BSEC_MAX_STATE_BLOB_SIZE) {
     // Existing state in NVS stored
     ESP_LOGI(TAG, "restoring BSEC state from NVRAM");
-    memcpy(bsecState, cfg.bsecstate, BSEC_MAX_STATE_BLOB_SIZE);
-    iaqSensor.setState(bsecState);
+    memcpy(bsecstate_buffer, cfg.bsecstate, BSEC_MAX_STATE_BLOB_SIZE);
+    iaqSensor.setState(bsecstate_buffer);
     checkIaqSensorStatus();
   } else // no state stored
     ESP_LOGI(TAG,
@@ -154,9 +161,9 @@ void updateState(void) {
   }
 
   if (update) {
-    memcpy(bsecState, cfg.bsecstate, BSEC_MAX_STATE_BLOB_SIZE);
+    memcpy(bsecstate_buffer, cfg.bsecstate, BSEC_MAX_STATE_BLOB_SIZE);
     cfg.bsecstate[BSEC_MAX_STATE_BLOB_SIZE + 1] = BSEC_MAX_STATE_BLOB_SIZE;
-    iaqSensor.getState(bsecState);
+    iaqSensor.getState(bsecstate_buffer);
     checkIaqSensorStatus();
     ESP_LOGI(TAG, "saving BSEC state to NVRAM");
     saveConfig();

src/configmanager.cpp

@@ -80,11 +80,11 @@ void saveConfig() {
     int16_t flash16 = 0;
     size_t required_size;
     char storedversion[10];
-    char bsecstate[BSEC_MAX_STATE_BLOB_SIZE + 1];
+    char bsecstate_buffer[BSEC_MAX_STATE_BLOB_SIZE + 1];
 
-    if (nvs_get_str(my_handle, "bsecstate", bsecstate, &required_size) !=
+    if (nvs_get_str(my_handle, "bsecstate", bsecstate_buffer, &required_size) !=
             ESP_OK ||
-        strcmp(bsecstate, cfg.bsecstate) != 0)
+        strcmp(bsecstate_buffer, cfg.bsecstate) != 0)
       nvs_set_str(my_handle, "bsecstate", cfg.bsecstate);
 
     if (nvs_get_str(my_handle, "version", storedversion, &required_size) !=
@@ -212,12 +212,10 @@ void loadConfig() {
 
     // populate pre set defaults with current values from NVRAM
 
-    char bsecstate[BSEC_MAX_STATE_BLOB_SIZE + 1];
-
     if (nvs_get_str(my_handle, "bsecstate", NULL, &required_size) == ESP_OK) {
       nvs_get_str(my_handle, "bsecstate", cfg.bsecstate, &required_size);
       ESP_LOGI(TAG, "bsecstate = %d",
-               cfg.bsecstate[BSEC_MAX_STATE_BLOB_SIZE + 1]);
+               (int)(cfg.bsecstate[BSEC_MAX_STATE_BLOB_SIZE + 1]));
     }
 
     if (nvs_get_i8(my_handle, "lorasf", &flash8) == ESP_OK) {

src/paxcounter.conf

@@ -72,7 +72,6 @@
 
 // Settings for BME680 environmental sensor (if present)
 #define BME_TEMP_OFFSET                 5.0f    // Offset sensor on chip temp <-> ambient temp [default = 5°C]
-#define BSEC_MAX_STATE_BLOB_SIZE        134     // size of Bosch BME680 state data blob
 #define STATE_SAVE_PERIOD               UINT32_C(360 * 60 * 1000) // update every 360 minutes = 4 times a day
 
 // OTA settings