Merge pull request #25 from cyberman54/test
v1.2.9: pull request #21 + some minor fixes
This commit is contained in:
commit
95759577db
17
README.md
17
README.md
@ -98,7 +98,7 @@ Note: all settings are stored in NVRAM and will be reloaded when device starts.
|
||||
|
||||
1 ... 255 used for wifi scan radius (greater values increase wifi scan radius, values 50...110 make sense)
|
||||
0 = Wifi rssi limiter disabled [default]
|
||||
|
||||
|
||||
0x02 set counter mode
|
||||
|
||||
0 = cyclic unconfirmed, mac counter reset after each wifi scan cycle, data is sent only once [default]
|
||||
@ -177,7 +177,7 @@ Note: all settings are stored in NVRAM and will be reloaded when device starts.
|
||||
|
||||
0x80 get device configuration
|
||||
|
||||
device answers with it's current configuration:
|
||||
device answers with it's current configuration. The configuration is a C structure declared in file [globals.h](src/globals.h#L23-L38) with the following definition:
|
||||
|
||||
byte 1: Lora SF (7..12)
|
||||
byte 2: Lora TXpower (2..15)
|
||||
@ -202,7 +202,18 @@ Note: all settings are stored in NVRAM and will be reloaded when device starts.
|
||||
0x82 get device cpu temperature
|
||||
|
||||
bytes 1-3: chip temperature in celsius (little endian format)
|
||||
|
||||
|
||||
# RGB Led color description
|
||||
|
||||
Description of the RGB LED color (Lopy and Lolin32 only):
|
||||
|
||||
- Yellow quick blink
|
||||
- LoRaWAN join
|
||||
- Blue blink
|
||||
- LoRaWAN transmit (including receive windows)
|
||||
- Magenta each blink
|
||||
- BLE Scan, seen a device (new or not)
|
||||
|
||||
# License
|
||||
|
||||
Copyright 2018 Oliver Brandmueller <ob@sysadm.in>
|
||||
|
@ -10,10 +10,10 @@
|
||||
|
||||
; ---> SELECT TARGET PLATFORM HERE! <---
|
||||
[platformio]
|
||||
;env_default = heltec_wifi_lora_32
|
||||
env_default = heltec_wifi_lora_32
|
||||
;env_default = ttgov1
|
||||
;env_default = ttgov2
|
||||
env_default = lopy
|
||||
;env_default = lopy
|
||||
;env_default = lopy4
|
||||
;env_default = lolin32lite_lora
|
||||
;env_default = lolin32_lora
|
||||
|
@ -13,9 +13,11 @@
|
||||
#include <lmic.h>
|
||||
#include <hal/hal.h>
|
||||
|
||||
// LED controls
|
||||
#ifdef HAS_RGB_LED
|
||||
#include <SmartLeds.h>
|
||||
#include <SmartLeds.h>
|
||||
#endif
|
||||
|
||||
#include "rgb_led.h"
|
||||
#include "macsniff.h"
|
||||
|
||||
|
@ -31,3 +31,7 @@
|
||||
#define OLED_RST U8X8_PIN_NONE // Not reset pin
|
||||
#define OLED_SDA 21 // ESP32 GPIO21 (Pin21) -- OLED SDA
|
||||
#define OLED_SCL 22 // ESP32 GPIO22 (Pin22) -- OLED SCL
|
||||
|
||||
// I2C config for Microchip 24AA02E64 DEVEUI unique address
|
||||
#define MCP_24AA02E64_I2C_ADDRESS 0x50 // I2C address for the 24AA02E64
|
||||
#define MCP_24AA02E64_MAC_ADDRESS 0xF8 // Memory adress of unique deveui 64 bits
|
||||
|
@ -30,3 +30,7 @@
|
||||
#define OLED_RST U8X8_PIN_NONE // Not reset pin
|
||||
#define OLED_SDA 14 // ESP32 GPIO14 (Pin14) -- OLED SDA
|
||||
#define OLED_SCL 12 // ESP32 GPIO12 (Pin12) -- OLED SCL
|
||||
|
||||
// I2C config for Microchip 24AA02E64 DEVEUI unique address
|
||||
#define MCP_24AA02E64_I2C_ADDRESS 0x50 // I2C address for the 24AA02E64
|
||||
#define MCP_24AA02E64_MAC_ADDRESS 0xF8 // Memory adress of unique deveui 64 bits
|
||||
|
@ -85,11 +85,14 @@ class MyAdvertisedDeviceCallbacks: public BLEAdvertisedDeviceCallbacks {
|
||||
void onResult(BLEAdvertisedDevice advertisedDevice) {
|
||||
uint8_t *p = (uint8_t *) advertisedDevice.getAddress().getNative();
|
||||
|
||||
rgb_set_color(COLOR_MAGENTA);
|
||||
// Current devices seen on this scan session
|
||||
currentScanDevice++;
|
||||
mac_add(p, advertisedDevice.getRSSI(), MAC_SNIFF_BLE);
|
||||
u8x8.setCursor(12,3);
|
||||
u8x8.printf("%d", currentScanDevice);
|
||||
rgb_set_color(COLOR_NONE);
|
||||
|
||||
}
|
||||
};
|
||||
|
||||
|
84
src/main.cpp
84
src/main.cpp
@ -29,7 +29,7 @@ Refer to LICENSE.txt file in repository for more details.
|
||||
#include <set>
|
||||
|
||||
// OLED driver
|
||||
#include <U8x8lib.h>
|
||||
#include <U8x8lib.h> // includes <wire.h> if needed for other on board i2c components
|
||||
|
||||
// LMIC-Arduino LoRaWAN Stack
|
||||
#include "loraconf.h"
|
||||
@ -259,7 +259,6 @@ void wifi_sniffer_loop(void * pvParameters) {
|
||||
channel = (channel % WIFI_CHANNEL_MAX) + 1; // rotates variable channel 1..WIFI_CHANNEL_MAX
|
||||
wifi_sniffer_set_channel(channel);
|
||||
ESP_LOGI(TAG, "Wifi set channel %d", channel);
|
||||
|
||||
u8x8.setCursor(0,5);
|
||||
u8x8.printf(!cfg.rssilimit ? "RLIM: off" : "RLIM: %4i", cfg.rssilimit);
|
||||
u8x8.setCursor(11,5);
|
||||
@ -283,13 +282,14 @@ void wifi_sniffer_loop(void * pvParameters) {
|
||||
bles.clear(); // clear BLE macs counter
|
||||
#endif
|
||||
salt = random(65536); // get new 16bit random for salting hashes
|
||||
u8x8.clearLine(0); u8x8.clearLine(1); // clear Display counter
|
||||
u8x8.clearLine(0); u8x8.clearLine(1); // clear Display counter
|
||||
}
|
||||
|
||||
// wait until payload is sent, while wifi scanning and mac counting task continues
|
||||
lorawait = 0;
|
||||
while(LMIC.opmode & OP_TXRXPEND) {
|
||||
if(!lorawait) u8x8.drawString(0,6,"LoRa wait ");
|
||||
if(!lorawait)
|
||||
u8x8.drawString(0,6,"LoRa wait ");
|
||||
lorawait++;
|
||||
// in case sending really fails: reset and rejoin network
|
||||
if( (lorawait % MAXLORARETRY ) == 0) {
|
||||
@ -303,11 +303,12 @@ void wifi_sniffer_loop(void * pvParameters) {
|
||||
u8x8.clearLine(6);
|
||||
|
||||
if (cfg.screenon && cfg.screensaver) {
|
||||
vTaskDelay(2000/portTICK_PERIOD_MS); // pause for displaying results
|
||||
}
|
||||
yield();
|
||||
u8x8.setPowerSave(1 && cfg.screensaver); // set display off if screensaver is enabled
|
||||
vTaskDelay(2000/portTICK_PERIOD_MS); // pause for displaying results
|
||||
yield();
|
||||
u8x8.setPowerSave(1 && cfg.screensaver); // set display off if screensaver is enabled
|
||||
}
|
||||
} // end of send data cycle
|
||||
|
||||
else {
|
||||
#ifdef BLECOUNTER
|
||||
if (nloop % (WIFI_CHANNEL_MAX * cfg.blescancycle) == 0 ) // once after cfg.blescancycle Wifi scans, do a BLE scan
|
||||
@ -345,6 +346,8 @@ void init_display(const char *Productname, const char *Version) {
|
||||
u8x8.begin();
|
||||
u8x8.setFont(u8x8_font_chroma48medium8_r);
|
||||
#ifdef HAS_DISPLAY
|
||||
u8x8.begin();
|
||||
u8x8.setFont(u8x8_font_chroma48medium8_r);
|
||||
uint8_t buf[32];
|
||||
u8x8.clear();
|
||||
u8x8.setFlipMode(0);
|
||||
@ -392,9 +395,9 @@ void init_display(const char *Productname, const char *Version) {
|
||||
|
||||
void setup() {
|
||||
|
||||
// disable brownout detection
|
||||
// disable brownout detection
|
||||
#ifdef DISABLE_BROWNOUT
|
||||
// Register with brownout is at address DR_REG_RTCCNTL_BASE + 0xd4
|
||||
// register with brownout is at address DR_REG_RTCCNTL_BASE + 0xd4
|
||||
(*((volatile uint32_t *)ETS_UNCACHED_ADDR((DR_REG_RTCCNTL_BASE+0xd4)))) = 0;
|
||||
#endif
|
||||
|
||||
@ -411,10 +414,10 @@ void setup() {
|
||||
ESP_LOGI(TAG, "Starting %s %s", PROGNAME, PROGVERSION);
|
||||
rgb_set_color(COLOR_NONE);
|
||||
|
||||
// system event handler for wifi task, needed for wifi_sniffer_init()
|
||||
// initialize system event handler for wifi task, needed for wifi_sniffer_init()
|
||||
esp_event_loop_init(NULL, NULL);
|
||||
|
||||
// Print chip information on startup
|
||||
// print chip information on startup if in verbose mode
|
||||
#ifdef VERBOSE
|
||||
esp_chip_info_t chip_info;
|
||||
esp_chip_info(&chip_info);
|
||||
@ -427,16 +430,16 @@ void setup() {
|
||||
ESP_LOGI(TAG, "ESP32 SDK: %s", ESP.getSdkVersion());
|
||||
#endif
|
||||
|
||||
// Read settings from NVRAM
|
||||
// read settings from NVRAM
|
||||
loadConfig(); // includes initialize if necessary
|
||||
|
||||
// initialize hardware
|
||||
// initialize led if needed
|
||||
#ifdef HAS_LED
|
||||
// initialize LED
|
||||
pinMode(HAS_LED, OUTPUT);
|
||||
digitalWrite(HAS_LED, LOW);
|
||||
#endif
|
||||
|
||||
// initialize button handling if needed
|
||||
#ifdef HAS_BUTTON
|
||||
#ifdef BUTTON_PULLUP
|
||||
// install button interrupt (pullup mode)
|
||||
@ -449,31 +452,56 @@ void setup() {
|
||||
#endif
|
||||
#endif
|
||||
|
||||
// initialize wifi antenna
|
||||
// initialize wifi antenna if needed
|
||||
#ifdef HAS_ANTENNA_SWITCH
|
||||
antenna_init();
|
||||
#endif
|
||||
|
||||
// initialize salt value using esp_random() called by random() in arduino-esp32 core
|
||||
salt = random(65536); // get new 16bit random for salting hashes
|
||||
// read DEVEUI from Microchip 24AA02E64 2Kb serial eeprom if present
|
||||
#ifdef MCP_24AA02E64_I2C_ADDRESS
|
||||
uint8_t i2c_ret;
|
||||
// Init this before OLED, we just need to get value then we're done with i2c bus
|
||||
Wire.begin(OLED_SDA, OLED_SDA, 100000);
|
||||
Wire.beginTransmission(MCP_24AA02E64_I2C_ADDRESS);
|
||||
Wire.write(MCP_24AA02E64_MAC_ADDRESS);
|
||||
i2c_ret = Wire.endTransmission();
|
||||
// check if device seen on i2c bus
|
||||
if (i2c_ret == 0) {
|
||||
char deveui[24];
|
||||
uint8_t data;
|
||||
Wire.beginTransmission(MCP_24AA02E64_I2C_ADDRESS);
|
||||
while (Wire.available()) {
|
||||
data = Wire.read();
|
||||
sprintf(deveui+strlen(deveui), "%02X ", data) ;
|
||||
}
|
||||
i2c_ret = Wire.endTransmission();
|
||||
ESP_LOGI(TAG, "Serial EEPROM 24AA02E64 found, read DEVEUI %s", deveui);
|
||||
} else {
|
||||
ESP_LOGI(TAG, "Serial EEPROM 24AA02E64 not found ret=%d", i2c_ret);
|
||||
}
|
||||
#endif // MCP 24AA02E64
|
||||
|
||||
// initialize display
|
||||
// initialize display
|
||||
init_display(PROGNAME, PROGVERSION);
|
||||
u8x8.setPowerSave(!cfg.screenon); // set display off if disabled
|
||||
u8x8.setCursor(0,5);
|
||||
u8x8.printf(!cfg.rssilimit ? "RLIM: off" : "RLIM: %4i", cfg.rssilimit);
|
||||
u8x8.drawString(0,6,"Join Wait ");
|
||||
|
||||
// output LoRaWAN keys to console
|
||||
// output LoRaWAN keys to console
|
||||
#ifdef VERBOSE
|
||||
printKeys();
|
||||
#endif // VERBOSE
|
||||
#endif
|
||||
|
||||
os_init(); // setup LMIC
|
||||
os_setCallback(&initjob, lora_init); // setup initial job & join network
|
||||
wifi_sniffer_init(); // setup wifi in monitor mode and start MAC counting
|
||||
os_init(); // setup LMIC
|
||||
os_setCallback(&initjob, lora_init); // setup initial job & join network
|
||||
wifi_sniffer_init(); // setup wifi in monitor mode and start MAC counting
|
||||
|
||||
// initialize salt value using esp_random() called by random() in arduino-esp32 core
|
||||
// note: do this *after* wifi has started, since gets it's seed from RF noise
|
||||
salt = random(65536); // get new 16bit random for salting hashes
|
||||
|
||||
// Start FreeRTOS tasks
|
||||
// Start FreeRTOS tasks
|
||||
#if CONFIG_FREERTOS_UNICORE // run all tasks on core 0 and switch off core 1
|
||||
ESP_LOGI(TAG, "Starting Lora task on core 0");
|
||||
xTaskCreatePinnedToCore(lorawan_loop, "loratask", 2048, ( void * ) 1, ( 5 | portPRIVILEGE_BIT ), NULL, 0);
|
||||
@ -487,9 +515,9 @@ void setup() {
|
||||
xTaskCreatePinnedToCore(wifi_sniffer_loop, "wifisniffer", 4096, ( void * ) 1, 1, NULL, 0);
|
||||
#endif
|
||||
|
||||
// Kickoff first sendjob, use payload "0000"
|
||||
uint8_t mydata[] = "0000";
|
||||
do_send(&sendjob);
|
||||
// Finally: kickoff first sendjob and join, then send initial payload "0000"
|
||||
uint8_t mydata[] = "0000";
|
||||
do_send(&sendjob);
|
||||
}
|
||||
|
||||
/* end Aruino SETUP ------------------------------------------------------------ */
|
||||
|
@ -1,5 +1,5 @@
|
||||
// program version - note: increment version after modifications to configData_t struct!!
|
||||
#define PROGVERSION "1.2.88" // use max 10 chars here!
|
||||
#define PROGVERSION "1.2.9" // use max 10 chars here!
|
||||
#define PROGNAME "PAXCNT"
|
||||
|
||||
// Verbose enables serial output
|
||||
@ -10,7 +10,7 @@
|
||||
#define BLECOUNTER 1 // comment out if you don't want BLE count
|
||||
|
||||
// BLE scan time
|
||||
#define BLESCANTIME 15 // [seconds]
|
||||
#define BLESCANTIME 10 // [seconds]
|
||||
#define BLESCANCYCLE 2 // BLE scan once after each <BLECYCLE> wifi scans
|
||||
|
||||
// WiFi Sniffer cycle interval
|
||||
|
Loading…
Reference in New Issue
Block a user