Merge pull request #351 from cyberman54/development

Fix battery function & new option WIFI off

include/globals.h

@@ -139,7 +139,7 @@ extern time_t userUTCTime;
 #include "button.h"
 #endif
 
-#ifdef HAS_BATTERY_PROBE
+#ifdef BAT_MEASURE_ADC
 #include "battery.h"
 #endif
 

src/battery.cpp

@@ -3,7 +3,7 @@
 // Local logging tag
 static const char TAG[] = __FILE__;
 
-#ifdef HAS_BATTERY_PROBE
+#ifdef BAT_MEASURE_ADC
 esp_adc_cal_characteristics_t *adc_characs =
     (esp_adc_cal_characteristics_t *)calloc(
         1, sizeof(esp_adc_cal_characteristics_t));
@@ -14,7 +14,7 @@ static const adc_unit_t unit = ADC_UNIT_1;
 #endif
 
 void calibrate_voltage(void) {
-#ifdef HAS_BATTERY_PROBE
+#ifdef BAT_MEASURE_ADC
   // configure ADC
   ESP_ERROR_CHECK(adc1_config_width(ADC_WIDTH_BIT_12));
   ESP_ERROR_CHECK(adc1_config_channel_atten(adc_channel, atten));
@@ -35,7 +35,7 @@ void calibrate_voltage(void) {
 }
 
 uint16_t read_voltage() {
-#ifdef HAS_BATTERY_PROBE
+#ifdef BAT_MEASURE_ADC
   // multisample ADC
   uint32_t adc_reading = 0;
   for (int i = 0; i < NO_OF_SAMPLES; i++) {

src/cyclic.cpp

@@ -9,7 +9,9 @@ static const char TAG[] = __FILE__;
 
 Ticker housekeeper;
 
-void housekeeping() { xTaskNotifyFromISR(irqHandlerTask, CYCLIC_IRQ, eSetBits, NULL); }
+void housekeeping() {
+  xTaskNotifyFromISR(irqHandlerTask, CYCLIC_IRQ, eSetBits, NULL);
+}
 
 // do all housekeeping
 void doHousekeeping() {
@@ -52,7 +54,7 @@ void doHousekeeping() {
 #endif
 
 // read battery voltage into global variable
-#ifdef HAS_BATTERY_PROBE
+#ifdef BAT_MEASURE_ADC
   batt_voltage = read_voltage();
   ESP_LOGI(TAG, "Voltage: %dmV", batt_voltage);
 #endif
@@ -115,8 +117,10 @@ uint32_t getFreeRAM() {
 }
 
 void reset_counters() {
+#if ((WIFICOUNTER) || (BLECOUNTER))
   macs.clear();   // clear all macs container
   macs_total = 0; // reset all counters
   macs_wifi = 0;
   macs_ble = 0;
+#endif
 }

src/display.cpp

@@ -185,7 +185,7 @@ void draw_page(time_t t, uint8_t page) {
   case 0:
 
 // update Battery status (line 2)
-#ifdef HAS_BATTERY_PROBE
+#ifdef BAT_MEASURE_ADC
     u8x8.setCursor(0, 2);
     u8x8.printf("B:%.2fV", batt_voltage / 1000.0);
 #endif

src/main.cpp

@@ -346,9 +346,8 @@ void setup() {
   strcat_P(features, " IF482");
 #endif
 
-  // show compiled features
-  ESP_LOGI(TAG, "Features:%s", features);
-
+#if (WIFICOUNTER)
+  strcat_P(features, " WIFI");
   // start wifi in monitor mode and start channel rotation timer
   ESP_LOGI(TAG, "Starting Wifi...");
   wifi_sniffer_init();
@@ -356,6 +355,15 @@ void setup() {
   // arduino-esp32 core. Note: do this *after* wifi has started, since
   // function gets it's seed from RF noise
   get_salt(); // get new 16bit for salting hashes
+#else
+  // switch off wifi
+  WiFi.mode(WIFI_OFF);
+  esp_wifi_stop();
+  esp_wifi_deinit();
+#endif
+
+  // show compiled features
+  ESP_LOGI(TAG, "Features:%s", features);
 
   // start state machine
   ESP_LOGI(TAG, "Starting Interrupt Handler...");

src/paxcounter.conf

@@ -13,9 +13,10 @@
 #define SENDCYCLE                       30      // payload send cycle [seconds/2], 0 .. 255
 #define PAYLOAD_ENCODER                 2       // payload encoder: 1=Plain, 2=Packed, 3=Cayenne LPP dynamic, 4=Cayenne LPP packed
 
-// Set this to include BLE counting and vendor filter functions
+// Set this to include BLE counting and vendor filter functions, or to switch off WIFI counting
 #define VENDORFILTER                    1       // set to 0 if you want to count things, not people
-#define BLECOUNTER                      0       // set it to 1 if you want to use BLE count, at expense of memory
+#define BLECOUNTER                      0       // set it to 1 if you want to use BLE count, at expense of power & memory
+#define WIFICOUNTER                     1       // set it to 0 if you want to switch off WIFI count
 
 // BLE scan parameters
 #define BLESCANTIME                     0       // [seconds] scan duration, 0 means infinite [default], see note below

src/payload.cpp

@@ -366,7 +366,7 @@ void PayloadConvert::addStatus(uint16_t voltage, uint64_t uptime, float celsius,
                                uint32_t mem, uint8_t reset1, uint8_t reset2) {
   uint16_t temp = celsius * 10;
   uint16_t volt = voltage / 10;
-#ifdef HAS_BATTERY_PROBE
+#ifdef BAT_MEASURE_ADC
 #if (PAYLOAD_ENCODER == 3)
   buffer[cursor++] = LPP_BATT_CHANNEL;
 #endif

src/rcommand.cpp

@@ -239,7 +239,7 @@ void get_config(uint8_t val[]) {
 
 void get_status(uint8_t val[]) {
   ESP_LOGI(TAG, "Remote command: get device status");
-#ifdef HAS_BATTERY_PROBE
+#ifdef BAT_MEASURE_ADC
   uint16_t voltage = read_voltage();
 #else
   uint16_t voltage = 0;

src/senddata.cpp

@@ -3,7 +3,9 @@
 
 Ticker sendcycler;
 
-void sendcycle() { xTaskNotifyFromISR(irqHandlerTask, SENDCYCLE_IRQ, eSetBits, NULL); }
+void sendcycle() {
+  xTaskNotifyFromISR(irqHandlerTask, SENDCYCLE_IRQ, eSetBits, NULL);
+}
 
 // put data to send in RTos Queues used for transmit over channels Lora and SPI
 void SendPayload(uint8_t port, sendprio_t prio) {
@@ -57,6 +59,7 @@ void sendCounter() {
   while (bitmask) {
     switch (bitmask & mask) {
 
+#if ((WIFICOUNTER) || (BLECOUNTER))
     case COUNT_DATA:
       payload.reset();
       payload.addCount(macs_wifi, MAC_SNIFF_WIFI);
@@ -70,6 +73,7 @@ void sendCounter() {
         ESP_LOGI(TAG, "Counter cleared");
       }
       break;
+#endif
 
 #if (HAS_BME)
     case MEMS_DATA:
@@ -110,7 +114,7 @@ void sendCounter() {
       break;
 #endif
 
-#ifdef HAS_BATTERY_PROBE
+#ifdef BAT_MEASURE_ADC
     case BATT_DATA:
       payload.reset();
       payload.addVoltage(read_voltage());