prepare LMIC battlevel MAC request

include/power.h

@@ -11,6 +11,10 @@
 #define DEFAULT_VREF 1100 // tbd: use adc2_vref_to_gpio() for better estimate
 #define NO_OF_SAMPLES 64  // we do some multisampling to get better values
 
+#ifndef BAT_MAX_VOLTAGE
+#define BAT_MAX_VOLTAGE 4100 // millivolts
+#endif
+
 uint16_t read_voltage(void);
 void calibrate_voltage(void);
 bool batt_sufficient(void);

src/lmic_config.h

@@ -104,3 +104,6 @@
 #define USE_IDEETRON_AES
 //
 //#define USE_MBEDTLS_AES
+
+// Define this for devices with external power.
+//#define LMIC_MCMD_DEVS_BATT_DEFAULT MCMD_DEVS_EXT_POWER

src/lorawan.cpp

@@ -538,32 +538,6 @@ const char *getCrName(rps_t rps) {
   return t[getCr(rps)];
 }
 
-/*
-u1_t os_getBattLevel() {
-
-  //return values:
-  //MCMD_DEVS_EXT_POWER   = 0x00, // external power supply
-  //MCMD_DEVS_BATT_MIN    = 0x01, // min battery value
-  //MCMD_DEVS_BATT_MAX    = 0xFE, // max battery value
-  //MCMD_DEVS_BATT_NOINFO = 0xFF, // unknown battery level
-
-#if (defined HAS_PMU || defined BAT_MEASURE_ADC)
-  uint16_t voltage = read_voltage();
-
-  switch (voltage) {
-  case 0:
-    return MCMD_DEVS_BATT_NOINFO;
-  case 0xffff:
-    return MCMD_DEVS_EXT_POWER;
-  default:
-    return (voltage > OTA_MIN_BATT ? MCMD_DEVS_BATT_MAX : MCMD_DEVS_BATT_MIN);
-  }
-#else // we don't have any info on battery level
-  return MCMD_DEVS_BATT_NOINFO;
-#endif
-} // getBattLevel()
-*/
-
 #if (VERBOSE)
 // decode LORAWAN MAC message
 void mac_decode(const uint8_t cmd[], const uint8_t cmdlen, bool is_down) {

src/power.cpp

@@ -217,5 +217,28 @@ uint16_t read_voltage() {
 
 #endif // HAS_PMU
 
+  /*
+  // set battery level value for lmic stack
+  #if (HAS_LORA)
+    // Sets the battery level returned in MAC Command DevStatusAns.
+    // Available defines in lorabase.h:
+    //   MCMD_DEVS_EXT_POWER   = 0x00, // external power supply
+    //   MCMD_DEVS_BATT_MIN    = 0x01, // min battery value
+    //   MCMD_DEVS_BATT_MAX    = 0xFE, // max battery value
+    //   MCMD_DEVS_BATT_NOINFO = 0xFF, // unknown battery level
+    // When setting the battery level calculate the applicable
+    // value from MCMD_DEVS_BATT_MIN to MCMD_DEVS_BATT_MAX.
+
+    // external power
+    if (voltage == 0xffff)
+      LMIC_setBattLevel(MCMD_DEVS_EXT_POWER);
+    // scale battery millivolts to lmic battlevel
+    else
+      LMIC_setBattLevel(voltage / BAT_MAX_VOLTAGE *
+                        (MCMD_DEVS_BATT_MAX - MCMD_DEVS_BATT_MIN + 1));
+
+#endif // (HAS_LORA)
+*/
+
   return voltage;
 }