sdcard & rgbled fixes

src/hal/ttgotdisplays3.h

@@ -1,24 +0,0 @@
-// clang-format off
-// upload_speed 1500000
-// board ESP32-S3-DevKitC-1
-
-#ifndef _TTGOTDISPLAYS3_H
-#define _TTGOTDISPLAYS3_H
-
-#include <stdint.h>
-
-#define HAS_LED NOT_A_PIN
-#define HAS_BUTTON 14       // on board button (right side)
-
-// power management settings
-//#define BAT_MEASURE_ADC ADC1_GPIO4_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_6
-//#define BAT_VOLTAGE_DIVIDER 2.605f         // voltage divider
-
-// Display Settings
-#define HAS_DISPLAY 2       // TFT-LCD parallel
-#define TFT_TYPE DISPLAY_T_DISPLAY_S3
-#define MY_DISPLAY_FLIP  1  // use if display is rotated
-#define MY_DISPLAY_WIDTH 172
-#define MY_DISPLAY_HEIGHT 320
-
-#endif

src/hal/ttgotdongledisplays3.h

@@ -0,0 +1,31 @@
+// clang-format off
+// upload_speed 1500000
+// board ESP32-S3-DevKitC-1
+
+// see https://github.com/Xinyuan-LilyGO/T-Dongle-S3
+
+#ifndef _TTGOTDONGLES3_H
+#define _TTGOTDONGLES3_H
+
+#include <stdint.h>
+
+#define HAS_LED NOT_A_PIN
+#define HAS_BUTTON 0
+
+#define HAS_SDCARD  2      // this board has a SD MMC card-reader/writer
+#define SDCARD_SLOTWIDTH 4 // 4-line interface
+
+#define HAS_DISPLAY 2       // TFT-LCD
+#define TFT_TYPE DISPLAY_TDONGLE_S3
+#define MY_DISPLAY_FLIP  1  // use if display is rotated
+#define MY_DISPLAY_WIDTH 80
+#define MY_DISPLAY_HEIGHT 160
+
+#define TFT_CS_PIN     4
+#define TFT_SDA_PIN    3
+#define TFT_SCL_PIN    5
+#define TFT_DC_PIN     2
+#define TFT_RES_PIN    1
+#define TFT_LEDA_PIN   38
+
+#endif

src/hal/ttgotdongles3.h

@@ -0,0 +1,21 @@
+// clang-format off
+// upload_speed 1500000
+// board ESP32-S3-DevKitC-1
+
+// for pinouts see https://github.com/Xinyuan-LilyGO/T-Dongle-S3
+
+#ifndef _TTGOTDONGLES3_H
+#define _TTGOTDONGLES3_H
+
+#include <stdint.h>
+
+#define HAS_LED NOT_A_PIN
+#define RGB_LED_COUNT 1
+#define HAS_RGB_LED FastLED.addLeds<APA102, 40, 39, BGR>(leds, RGB_LED_COUNT)
+#define FASTLED_INTERNAL
+#define HAS_BUTTON 0       // dongle button is on GPIO0
+#define HAS_SDCARD  2      // dongle has a SD MMC card-reader/writer
+#define SDCARD_SLOTWIDTH 4 // dongle has 4 line interface
+#define SDCARD_SLOTCONFIG { .clk = GPIO_NUM_12, .cmd = GPIO_NUM_16, .d0 = GPIO_NUM_14, .d1 = GPIO_NUM_17, .d2 = GPIO_NUM_21, .d3 = GPIO_NUM_18, .cd = SDMMC_SLOT_NO_CD, .wp = SDMMC_SLOT_NO_WP, .width = 4, .flags = 0, }
+
+#endif