commit
8ad22c92cc
@ -47,7 +47,7 @@ description = Paxcounter is a device for metering passenger flows in realtime. I
|
||||
|
||||
[common]
|
||||
; for release_version use max. 10 chars total, use any decimal format like "a.b.c"
|
||||
release_version = 3.5.0
|
||||
release_version = 3.6.0
|
||||
; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
|
||||
; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
|
||||
debug_level = 3
|
||||
@ -55,7 +55,7 @@ extra_scripts = pre:src/build.py
|
||||
otakeyfile = ota.conf
|
||||
lorakeyfile = loraconf.h
|
||||
lmicconfigfile = lmic_config.h
|
||||
platform_espressif32 = espressif32@6.0.1
|
||||
platform_espressif32 = espressif32@6.3.0
|
||||
monitor_speed = 115200
|
||||
upload_speed = 115200 ; set by build.py and taken from hal file
|
||||
lib_deps_lora =
|
||||
@ -92,19 +92,17 @@ lib_deps_all =
|
||||
${common.lib_deps_gps}
|
||||
${common.lib_deps_sensors}
|
||||
${common.lib_deps_ledmatrix}
|
||||
build_flags_basic =
|
||||
build_flags_all =
|
||||
-include "src/paxcounter.conf"
|
||||
'-DCORE_DEBUG_LEVEL=${common.debug_level}'
|
||||
'-DLOG_LOCAL_LEVEL=${common.debug_level}'
|
||||
'-DPROGVERSION="${common.release_version}"'
|
||||
'-D CORE_DEBUG_LEVEL=${common.debug_level}'
|
||||
'-D LOG_LOCAL_LEVEL=${common.debug_level}'
|
||||
'-D PROGVERSION="${common.release_version}"'
|
||||
'-D LIBPAX_WIFI'
|
||||
'-D LIBPAX_BLE'
|
||||
'-D LIBPAX_ARDUINO'
|
||||
'-DUSE_ESP_IDF_LOG'
|
||||
'-DTAG=__FILE__'
|
||||
build_flags_all =
|
||||
${common.build_flags_basic}
|
||||
-mfix-esp32-psram-cache-issue
|
||||
'-D USE_ESP_IDF_LOG'
|
||||
'-D TAG=__FILE__'
|
||||
'-U BOARD_HAS_PSRAM'
|
||||
|
||||
[env]
|
||||
framework = arduino
|
||||
|
@ -10,7 +10,7 @@ description = Paxcounter is a device for metering passenger flows in realtime. I
|
||||
|
||||
[common]
|
||||
; for release_version use max. 10 chars total, use any decimal format like "a.b.c"
|
||||
release_version = 3.5.0
|
||||
release_version = 3.6.0
|
||||
; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
|
||||
; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
|
||||
debug_level = 3
|
||||
@ -18,7 +18,7 @@ extra_scripts = pre:src/build.py
|
||||
otakeyfile = ota.conf
|
||||
lorakeyfile = loraconf.h
|
||||
lmicconfigfile = lmic_config.h
|
||||
platform_espressif32 = espressif32@6.0.1
|
||||
platform_espressif32 = espressif32@6.3.0
|
||||
monitor_speed = 115200
|
||||
upload_speed = 115200 ; set by build.py and taken from hal file
|
||||
lib_deps_all =
|
||||
@ -31,19 +31,17 @@ lib_deps_all =
|
||||
mathertel/OneButton @ ^2.0.3
|
||||
256dpi/MQTT @ ^2.5.1
|
||||
ricmoo/QRCode @ ^0.0.1
|
||||
build_flags_basic =
|
||||
build_flags_all =
|
||||
-include "src/paxcounter.conf"
|
||||
'-DCORE_DEBUG_LEVEL=${common.debug_level}'
|
||||
'-DLOG_LOCAL_LEVEL=${common.debug_level}'
|
||||
'-DPROGVERSION="${common.release_version}"'
|
||||
'-D CORE_DEBUG_LEVEL=${common.debug_level}'
|
||||
'-D LOG_LOCAL_LEVEL=${common.debug_level}'
|
||||
'-D PROGVERSION="${common.release_version}"'
|
||||
'-D LIBPAX_WIFI'
|
||||
'-D LIBPAX_BLE'
|
||||
'-D LIBPAX_ARDUINO'
|
||||
'-DUSE_ESP_IDF_LOG'
|
||||
'-DTAG=__FILE__'
|
||||
build_flags_all =
|
||||
${common.build_flags_basic}
|
||||
-mfix-esp32-psram-cache-issue
|
||||
'-D USE_ESP_IDF_LOG'
|
||||
'-D TAG=__FILE__'
|
||||
'-U BOARD_HAS_PSRAM'
|
||||
|
||||
[env]
|
||||
framework = arduino
|
||||
|
@ -142,7 +142,7 @@ void dp_init(bool verbose) {
|
||||
void dp_refresh(bool nextPage) {
|
||||
struct count_payload_t count; // libpax count storage
|
||||
static uint8_t DisplayPage = 0;
|
||||
char timeState, strftime_buf[64];
|
||||
char timeState, strftime_buf[45];
|
||||
time_t now;
|
||||
struct tm timeinfo = {0};
|
||||
#ifndef HAS_BUTTON
|
||||
|
@ -11,12 +11,12 @@
|
||||
// generic.h is kitchensink with all available options
|
||||
|
||||
#define HAS_LORA 1 // comment out if device shall not send data via LoRa or has no LoRa
|
||||
#define HAS_SPI 1 // comment out if device shall not send data via SPI
|
||||
//#define HAS_SPI 1 // comment out if device shall not send data via SPI
|
||||
// pin definitions for SPI slave interface
|
||||
#define SPI_MOSI GPIO_NUM_23
|
||||
#define SPI_MISO GPIO_NUM_19
|
||||
#define SPI_SCLK GPIO_NUM_18
|
||||
#define SPI_CS GPIO_NUM_5
|
||||
//#define SPI_MOSI GPIO_NUM_23
|
||||
//#define SPI_MISO GPIO_NUM_19
|
||||
//#define SPI_SCLK GPIO_NUM_18
|
||||
//#define SPI_CS GPIO_NUM_5
|
||||
|
||||
// enable only if you want to store a local paxcount table on the device
|
||||
#define HAS_SDCARD 1 // this board has an SD-card-reader/writer
|
||||
@ -35,9 +35,9 @@
|
||||
// for loading necessary libraries
|
||||
|
||||
// BME680 sensor on I2C bus
|
||||
#define HAS_BME 1 // Enable BME sensors in general
|
||||
#define HAS_BME680 GPIO_NUM_21, GPIO_NUM_22 // SDA, SCL
|
||||
#define BME680_ADDR BME68X_I2C_ADDR_LOW // connect SDIO of BME680 to GND
|
||||
//#define HAS_BME 1 // Enable BME sensors in general
|
||||
//#define HAS_BME680 GPIO_NUM_21, GPIO_NUM_22 // SDA, SCL
|
||||
//#define BME680_ADDR BME68X_I2C_ADDR_LOW // connect SDIO of BME680 to GND
|
||||
|
||||
// BME280 sensor on I2C bus
|
||||
//#define HAS_BME 1 // Enable BME sensors in general
|
||||
@ -49,10 +49,10 @@
|
||||
//#define BMP180_ADDR 0x77
|
||||
|
||||
// SDS011 dust sensor settings
|
||||
#define HAS_SDS011 1 // use SDS011
|
||||
//#define HAS_SDS011 1 // use SDS011
|
||||
// used pins on the ESP-side:
|
||||
#define SDS_TX 19 // connect to RX on the SDS011
|
||||
#define SDS_RX 23 // connect to TX on the SDS011
|
||||
//#define SDS_TX 19 // connect to RX on the SDS011
|
||||
//#define SDS_RX 23 // connect to TX on the SDS011
|
||||
|
||||
// up to three user defined sensors (if connected)
|
||||
//#define HAS_SENSOR_1 1 // comment out if device has user defined sensor #1
|
||||
@ -64,29 +64,29 @@
|
||||
//#define BOARD_HAS_PSRAM // use if board has external SPIRAM, note: this will reduce IRAM0 by 64KB for SPIRAM cache
|
||||
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
|
||||
|
||||
#define HAS_DISPLAY 1
|
||||
//#define HAS_DISPLAY 1
|
||||
//#define MY_DISPLAY_FLIP 1 // use if display is rotated
|
||||
#define BAT_MEASURE_ADC ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
|
||||
#define BAT_VOLTAGE_DIVIDER 2 // voltage divider 100k/100k on board
|
||||
|
||||
#define HAS_LED (21) // on board LED
|
||||
#define HAS_BUTTON (39) // on board button
|
||||
#define RGB_LED_COUNT 1 // we have 1 LED
|
||||
#define HAS_RGB_LED FastLED.addLeds<WS2812, GPIO_NUM_0, GRB>(leds, RGB_LED_COUNT);
|
||||
//#define RGB_LED_COUNT 1 // we have 1 LED
|
||||
//#define HAS_RGB_LED FastLED.addLeds<WS2812, GPIO_NUM_0, GRB>(leds, RGB_LED_COUNT);
|
||||
|
||||
// GPS settings
|
||||
#define HAS_GPS 1 // use on board GPS
|
||||
#define GPS_SERIAL 9600, SERIAL_8N1, GPIO_NUM_12, GPIO_NUM_15 // UBlox NEO 6M RX, TX
|
||||
#define GPS_INT GPIO_NUM_13 // 30ns accurary timepulse, to be external wired on pcb: NEO 6M Pin#3 -> GPIO13
|
||||
//#define HAS_GPS 1 // use on board GPS
|
||||
//#define GPS_SERIAL 9600, SERIAL_8N1, GPIO_NUM_12, GPIO_NUM_15 // UBlox NEO 6M RX, TX
|
||||
//#define GPS_INT GPIO_NUM_13 // 30ns accurary timepulse, to be external wired on pcb: NEO 6M Pin#3 -> GPIO13
|
||||
|
||||
// Pins for I2C interface of OLED Display
|
||||
#define MY_DISPLAY_SDA (4)
|
||||
#define MY_DISPLAY_SCL (15)
|
||||
#define MY_DISPLAY_RST (16)
|
||||
//#define MY_DISPLAY_SDA (4)
|
||||
//#define MY_DISPLAY_SCL (15)
|
||||
//#define MY_DISPLAY_RST (16)
|
||||
|
||||
// Settings for on board DS3231 RTC chip
|
||||
#define HAS_RTC MY_DISPLAY_SDA, MY_DISPLAY_SCL // SDA, SCL
|
||||
#define RTC_INT GPIO_NUM_34 // timepulse with accuracy +/- 2*e-6 [microseconds] = 0,1728sec / day
|
||||
//#define HAS_RTC MY_DISPLAY_SDA, MY_DISPLAY_SCL // SDA, SCL
|
||||
//#define RTC_INT GPIO_NUM_34 // timepulse with accuracy +/- 2*e-6 [microseconds] = 0,1728sec / day
|
||||
|
||||
// Settings for IF482 interface
|
||||
//#define HAS_IF482 9600, SERIAL_7E1, GPIO_NUM_12, GPIO_NUM_14 // IF482 serial port parameters
|
||||
|
@ -1,7 +1,6 @@
|
||||
// clang-format off
|
||||
// upload_speed 921600
|
||||
// board m5stack-core-esp32
|
||||
// b0ard m5stack-fire -> does not compile due to IRAM0 shortage, because 64KB of 192KB used for caching external SPIRAM
|
||||
// board m5stack-fire
|
||||
|
||||
// note use of GPIO16/17
|
||||
// https://www.bjoerns-techblog.de/2019/03/m5stack-fire-eine-uebersicht/
|
||||
@ -22,18 +21,18 @@
|
||||
#define LORA_IO2 LMIC_UNUSED_PIN
|
||||
|
||||
// enable only if you want to store a local paxcount table on the device
|
||||
#define HAS_SDCARD 1 // this board has an SD-card-reader/writer
|
||||
#define SDCARD_CS GPIO_NUM_4
|
||||
#define SDCARD_MOSI MOSI
|
||||
#define SDCARD_MISO MISO
|
||||
#define SDCARD_SCLK SCK
|
||||
//#define HAS_SDCARD 1 // this board has an SD-card-reader/writer
|
||||
//#define SDCARD_CS GPIO_NUM_4
|
||||
//#define SDCARD_MOSI MOSI
|
||||
//#define SDCARD_MISO MISO
|
||||
//#define SDCARD_SCLK SCK
|
||||
|
||||
#define CFG_sx1276_radio 1 // select LoRa chip
|
||||
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
|
||||
|
||||
#define HAS_LED NOT_A_PIN // no on board LED (?)
|
||||
#define RGB_LED_COUNT 10 // M5fire has a stripe of 10 RGB Pixels
|
||||
#define HAS_RGB_LED FastLED.addLeds<SK6812, GPIO_NUM_15, GRB>(leds, RGB_LED_COUNT);
|
||||
//#define RGB_LED_COUNT 10 // M5fire has a stripe of 10 RGB Pixels
|
||||
//#define HAS_RGB_LED FastLED.addLeds<SK6812, GPIO_NUM_15, GRB>(leds, RGB_LED_COUNT);
|
||||
#define HAS_BUTTON (39) // on board button A
|
||||
|
||||
// power management settings
|
||||
|
@ -106,4 +106,4 @@
|
||||
//#define USE_MBEDTLS_AES
|
||||
|
||||
// Define this for devices with external power.
|
||||
//#define LMIC_MCMD_DEVS_BATT_DEFAULT MCMD_DEVS_EXT_POWER
|
||||
//#define LMIC_MCMD_DEVS_BATT_DEFAULT MCMD_DEVS_EXT_POWER
|
||||
|
Loading…
Reference in New Issue
Block a user