rename loraconf_sample.h

2020-09-29 17:28:10 +02:00
1 parent 73104cafeb
commit 8a8d3a8f1a
@@ -0,0 +1,88 @@
+#ifndef __LORACONF_H__
+#define __LORACONF_H__
+
+#if (HAS_LORA)
+
+/************************************************************
+ * LMIC LoRaWAN configuration
+ *
+ * Read the values from TTN console (or whatever applies), insert them here,
+ * and rename this file to src/loraconf.h
+ *
+ * You can configure OTAA or ABP Activation. In order to use ABP, uncomment
+ * (enable) the following line, but you should only do so, if you have good 
+ * reasons for not using OTAA.
+ * 
+ *************************************************************/
+
+//#define LORA_ABP
+
+#ifndef LORA_ABP
+/************************************************************
+ * OTAA configuration
+ * 
+ * DEVEUI, APPEUI and APPKEY should all be specified in MSB format as 
+ * displayed in TTN console, so you can cut & paste from there. This is different
+ * from standard LMIC-Arduino which expects DEVEUI and APPEUI in LSB format.
+ * For TTN, APPEUI in MSB format always starts with 0x70, 0xB3, 0xD5.
+ * Set your DEVEUI here, if your device has have a fixed one. 
+ * If you leave this untouched, then the DEVEUI will be derived from device's 
+ * MAC adress during startup and will be displayed on device's screen as well as
+ * on serial console, if you set 'verbose 1' in paxcounter.conf and 
+ * 'debug_level 3' in platformio.ini.
+ * If using a board with Microchip 24AA02E64 Uinique ID for deveui, the DEVEUI 
+ * will be overwritten by the one contained in the Microchip module.
+ *
+ ************************************************************/
+
+static const u1_t DEVEUI[8] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+
+static const u1_t APPEUI[8] = {0x70, 0xB3, 0xD5, 0x00, 0x00, 0x00, 0x00, 0x00};
+
+static const u1_t APPKEY[16] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+                                0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+
+#endif
+
+#ifdef LORA_ABP
+/************************************************************
+ * ABP configuration (for development)
+ *
+ * Get your
+ *   - Network Session Key (NWKSKEY)
+ *   - App Session Key and your (APPSKEY)
+ *   - Device Address (DEVADDR)
+ * from e.g. TTN console and replace the example values below.
+ * 
+ * NOTE: Use MSB format (as displayed in TTN console, so you can cut & paste
+ * from there)
+ *
+ * NOTE: You may also need to adjust lorawan_abp.cpp in order to configure
+ * different channels and data rate channels to match your country's regulations
+ * and your network's settings.
+ * 
+ ************************************************************/
+
+// ID of LoRaAlliance assigned Network (for a list, see e.g. here
+// https://www.thethingsnetwork.org/docs/lorawan/prefix-assignments.html)
+static const u1_t NETID = 0x13; // TTN
+
+static const u1_t NWKSKEY[16] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+                                 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+                                 0x00, 0x00, 0x00, 0x00};
+
+static const u1_t APPSKEY[16] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+                                 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+                                 0x00, 0x00, 0x00, 0x00};
+
+static const u4_t DEVADDR =
+    0x00000000; // <-- Change this address for every node!
+
+// set additional ABP parameters in loraconf_abp.cpp
+void setABPParameters();
+
+#endif
+
+#endif // HAS_LORA
+
+#endif // __LORACONF_H__