commit
825520a20f
15
README.md
15
README.md
@ -150,7 +150,16 @@ Paxcounter generates identifiers for sniffed MAC adresses and collects them temp
|
||||
|
||||
# Display
|
||||
|
||||
If you're using a device with OLED display, or if you add such one to the I2C bus, the device shows live data on the display. You can flip between pages showing pax, time, GPS and BME sensor data by pressing the button of the device.
|
||||
If you're using a device with OLED display, or if you add such one to the I2C bus, the device shows live data on the display. You can flip display pages showing
|
||||
|
||||
- recent count of pax
|
||||
- histogram
|
||||
- GPS data
|
||||
- BME sensor data
|
||||
- time of day
|
||||
- blank page
|
||||
|
||||
by pressing the button of the device.
|
||||
|
||||
# Sensors and Peripherals
|
||||
|
||||
@ -312,8 +321,8 @@ Note: all settings are stored in NVRAM and will be reloaded when device starts.
|
||||
Example for EU868:
|
||||
|
||||
DataRate Configuration Bit/s
|
||||
0 LoRa: SF12 / 125 kHz 250
|
||||
1 LoRa: SF11 / 125 kHz 440
|
||||
0 LoRa: SF12 / 125 kHz 250
|
||||
1 LoRa: SF11 / 125 kHz 440
|
||||
2 LoRa: SF10 / 125 kHz 980
|
||||
3 LoRa: SF9 / 125 kHz 1760
|
||||
4 LoRa: SF8 / 125 kHz 3125
|
||||
|
@ -5,6 +5,7 @@
|
||||
#include "senddata.h"
|
||||
#include "rcommand.h"
|
||||
#include "spislave.h"
|
||||
|
||||
#if(HAS_LORA)
|
||||
#include <lmic.h>
|
||||
#endif
|
||||
@ -13,6 +14,10 @@
|
||||
#include "bmesensor.h"
|
||||
#endif
|
||||
|
||||
#ifdef HAS_DISPLAY
|
||||
#include "display.h"
|
||||
#endif
|
||||
|
||||
extern Ticker housekeeper;
|
||||
|
||||
void housekeeping(void);
|
||||
|
@ -1,16 +1,26 @@
|
||||
#ifndef _DISPLAY_H
|
||||
#define _DISPLAY_H
|
||||
|
||||
#include <U8x8lib.h>
|
||||
#include "cyclic.h"
|
||||
#include "qrcode.h"
|
||||
|
||||
extern uint8_t DisplayIsOn;
|
||||
|
||||
extern HAS_DISPLAY u8x8;
|
||||
|
||||
void init_display(const char *Productname, const char *Version);
|
||||
void refreshTheDisplay(bool nextPage = false);
|
||||
void init_display(uint8_t verbose = 0);
|
||||
void draw_page(time_t t, uint8_t page);
|
||||
void DisplayKey(const uint8_t *key, uint8_t len, bool lsb);
|
||||
void dp_printf(uint16_t x, uint16_t y, uint8_t font, uint8_t inv,
|
||||
const char *format, ...);
|
||||
void dp_printqr(uint16_t offset_x, uint16_t offset_y, const char *Message);
|
||||
void oledfillRect(uint16_t x, uint16_t y, uint16_t width, uint16_t height,
|
||||
uint8_t bRender);
|
||||
void oledScrollBufferHorizontal(uint8_t *buf, const uint16_t width,
|
||||
const uint16_t height, bool left = true);
|
||||
void oledScrollBufferVertical(uint8_t *buf, const uint16_t width,
|
||||
const uint16_t height, int offset = 0);
|
||||
int oledDrawPixel(uint8_t *buf, const uint16_t x, const uint16_t y,
|
||||
const uint8_t dot);
|
||||
void oledPlotCurve(uint16_t count, bool reset);
|
||||
void oledRescaleBuffer(uint8_t *buf, const int factor);
|
||||
|
||||
#endif
|
@ -41,9 +41,12 @@
|
||||
#define BLE_MODE (0x40)
|
||||
#define SCREEN_MODE (0x80)
|
||||
|
||||
// length of display buffer for lmic event messages
|
||||
#define LMIC_EVENTMSG_LEN 17
|
||||
|
||||
// I2C bus access control
|
||||
#define I2C_MUTEX_LOCK() \
|
||||
(xSemaphoreTake(I2Caccess, pdMS_TO_TICKS(10)) == pdTRUE)
|
||||
(xSemaphoreTake(I2Caccess, pdMS_TO_TICKS(DISPLAYREFRESH_MS)) == pdTRUE)
|
||||
#define I2C_MUTEX_UNLOCK() (xSemaphoreGive(I2Caccess))
|
||||
|
||||
enum sendprio_t { prio_low, prio_normal, prio_high };
|
||||
@ -104,9 +107,9 @@ extern std::set<uint16_t, std::less<uint16_t>, Mallocator<uint16_t>> macs;
|
||||
extern std::array<uint64_t, 0xff>::iterator it;
|
||||
extern std::array<uint64_t, 0xff> beacons;
|
||||
|
||||
extern configData_t cfg; // current device configuration
|
||||
extern char lmic_event_msg[]; // display buffer
|
||||
extern uint8_t volatile channel; // wifi channel rotation counter
|
||||
extern configData_t cfg; // current device configuration
|
||||
extern char lmic_event_msg[LMIC_EVENTMSG_LEN]; // display buffer
|
||||
extern uint8_t volatile channel; // wifi channel rotation counter
|
||||
extern uint16_t volatile macs_total, macs_wifi, macs_ble,
|
||||
batt_voltage; // display values
|
||||
extern bool volatile TimePulseTick; // 1sec pps flag set by GPS or RTC
|
||||
|
@ -13,6 +13,6 @@ void refreshTheMatrixDisplay(bool nextPage = false);
|
||||
void DrawNumber(String strNum, uint8_t iDotPos = 0);
|
||||
uint8_t GetCharFromFont(char cChar);
|
||||
uint8_t GetCharWidth(char cChar);
|
||||
void ScrollLeft(uint8_t *buf, const uint16_t cols, const uint16_t rows);
|
||||
void ScrollMatrixLeft(uint8_t *buf, const uint16_t cols, const uint16_t rows);
|
||||
|
||||
#endif
|
@ -20,7 +20,6 @@
|
||||
#include <Wire.h>
|
||||
#endif
|
||||
|
||||
extern QueueHandle_t LoraSendQueue;
|
||||
extern TaskHandle_t lmicTask, lorasendTask;
|
||||
|
||||
// table of LORAWAN MAC commands
|
||||
@ -31,8 +30,8 @@ typedef struct {
|
||||
} mac_t;
|
||||
|
||||
esp_err_t lora_stack_init();
|
||||
void lora_setupForNetwork(bool preJoin);
|
||||
void lmictask(void *pvParameters);
|
||||
void onEvent(ev_t ev);
|
||||
void gen_lora_deveui(uint8_t *pdeveui);
|
||||
void RevBytes(unsigned char *b, size_t c);
|
||||
void get_hard_deveui(uint8_t *pdeveui);
|
||||
@ -43,6 +42,7 @@ void showLoraKeys(void);
|
||||
void lora_send(void *pvParameters);
|
||||
void lora_enqueuedata(MessageBuffer_t *message);
|
||||
void lora_queuereset(void);
|
||||
void myEventCallback(void *pUserData, ev_t ev);
|
||||
void myRxCallback(void *pUserData, uint8_t port, const uint8_t *pMsg,
|
||||
size_t nMsg);
|
||||
void myTxCallback(void *pUserData, int fSuccess);
|
||||
|
@ -4,6 +4,7 @@
|
||||
#ifdef USE_OTA
|
||||
|
||||
#include "globals.h"
|
||||
#include <ss_oled.h>
|
||||
#include <Update.h>
|
||||
#include <WiFi.h>
|
||||
#include <WiFiClientSecure.h>
|
||||
@ -14,11 +15,9 @@
|
||||
int do_ota_update();
|
||||
void start_ota_update();
|
||||
int version_compare(const String v1, const String v2);
|
||||
void display(const uint8_t row, const std::string status,
|
||||
const std::string msg);
|
||||
#ifdef HAS_DISPLAY
|
||||
void ota_display(const uint8_t row, const std::string status,
|
||||
const std::string msg);
|
||||
void show_progress(unsigned long current, unsigned long size);
|
||||
#endif
|
||||
|
||||
#endif // USE_OTA
|
||||
|
||||
|
@ -19,6 +19,8 @@ void power_event_IRQ(void);
|
||||
void AXP192_power(bool on);
|
||||
void AXP192_init(void);
|
||||
void AXP192_showstatus(void);
|
||||
uint8_t i2c_writeBytes(uint8_t addr, uint8_t reg, uint8_t *data, uint8_t len);
|
||||
uint8_t i2c_readBytes(uint8_t addr, uint8_t reg, uint8_t *data, uint8_t len);
|
||||
#endif // HAS_PMU
|
||||
|
||||
#endif
|
@ -2,10 +2,15 @@
|
||||
#define _SENDDATA_H
|
||||
|
||||
#include "spislave.h"
|
||||
#include "cyclic.h"
|
||||
|
||||
#if(HAS_LORA)
|
||||
#include "lorawan.h"
|
||||
#endif
|
||||
#include "cyclic.h"
|
||||
|
||||
#ifdef HAS_DISPLAY
|
||||
#include "display.h"
|
||||
#endif
|
||||
|
||||
extern Ticker sendcycler;
|
||||
|
||||
|
@ -7,13 +7,16 @@
|
||||
#include "timekeeper.h"
|
||||
|
||||
//#define TIME_SYNC_TRIGGER 100 // threshold for time sync [milliseconds]
|
||||
#define TIME_SYNC_FRAME_LENGTH 0x05 // timeserver answer frame length [bytes]
|
||||
#define TIME_SYNC_FRAME_LENGTH 0x07 // timeserver answer frame length [bytes]
|
||||
#define TIME_SYNC_FIXUP 4 // calibration to fixup processing time [milliseconds]
|
||||
#define TIMEREQUEST_MAX_SEQNO 0xf0 // threshold for wrap around seqno
|
||||
|
||||
void timesync_init(void);
|
||||
void send_timesync_req(void);
|
||||
int recv_timesync_ans(const uint8_t seq_no, const uint8_t buf[], const uint8_t buf_len);
|
||||
|
||||
int recv_timesync_ans(const uint8_t buf[], uint8_t buf_len);
|
||||
|
||||
void process_timesync_req(void *taskparameter);
|
||||
void store_time_sync_req(uint32_t t_millisec);
|
||||
|
||||
#endif
|
||||
#endif
|
||||
|
@ -43,7 +43,7 @@ description = Paxcounter is a device for metering passenger flows in realtime. I
|
||||
|
||||
[common]
|
||||
; for release_version use max. 10 chars total, use any decimal format like "a.b.c"
|
||||
release_version = 1.8.34
|
||||
release_version = 1.9.6
|
||||
; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
|
||||
; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
|
||||
debug_level = 3
|
||||
@ -51,29 +51,32 @@ extra_scripts = pre:build.py
|
||||
otakeyfile = ota.conf
|
||||
lorakeyfile = loraconf.h
|
||||
lmicconfigfile = lmic_config.h
|
||||
platform_espressif32 = espressif32@1.9.0
|
||||
platform_espressif32 = espressif32@1.11.0
|
||||
monitor_speed = 115200
|
||||
upload_speed = 115200
|
||||
lib_deps_lora =
|
||||
MCCI LoRaWAN LMIC library@>=3.0.99
|
||||
;MCCI LoRaWAN LMIC library@>=3.1.0
|
||||
https://github.com/mcci-catena/arduino-lmic.git#5322dd1
|
||||
lib_deps_display =
|
||||
U8g2@>=2.26.13
|
||||
ss_oled@>=3.0.0
|
||||
BitBang_I2C@>=1.2.0
|
||||
QRCode@>=0.0.1
|
||||
lib_deps_matrix_display =
|
||||
https://github.com/Seeed-Studio/Ultrathin_LED_Matrix.git
|
||||
lib_deps_rgbled =
|
||||
SmartLeds@>=1.1.6
|
||||
lib_deps_gps =
|
||||
1655@>=1.0.2 ;TinyGPSPlus by Mikal Hart
|
||||
1655@>=1.0.2 ; #1655 TinyGPSPlus by Mikal Hart
|
||||
lib_deps_sensors =
|
||||
Adafruit Unified Sensor@>=1.0.3
|
||||
Adafruit BME280 Library@>=1.0.9
|
||||
Adafruit BME280 Library@>=1.0.10
|
||||
lib_deps_basic =
|
||||
ArduinoJson@^5.13.1
|
||||
76@>=1.2.2 ;Timezone by Jack Christensen
|
||||
274@>=2.3.3 ;RTC by Michael Miller
|
||||
76@>=1.2.2 ; #76 Timezone by Jack Christensen
|
||||
274@>=2.3.3 ; #274 RTC by Michael Miller
|
||||
SimpleButton
|
||||
;AXP202X_Library@^1.0.1
|
||||
https://github.com/lewisxhe/AXP202X_Library.git#8045ddf
|
||||
https://github.com/lewisxhe/AXP202X_Library.git
|
||||
;AXP202X_Library@>=1.0.1
|
||||
lib_deps_all =
|
||||
${common.lib_deps_basic}
|
||||
${common.lib_deps_lora}
|
||||
|
@ -1,6 +1,6 @@
|
||||
[
|
||||
{
|
||||
"id": "49e3c067.e782e",
|
||||
"id": "9b4f492d.fbfd18",
|
||||
"type": "change",
|
||||
"z": "449c1517.e25f4c",
|
||||
"name": "Payload",
|
||||
@ -48,32 +48,32 @@
|
||||
"from": "",
|
||||
"to": "",
|
||||
"reg": false,
|
||||
"x": 240,
|
||||
"y": 513,
|
||||
"x": 220,
|
||||
"y": 520,
|
||||
"wires": [
|
||||
[
|
||||
"84f1cda2.069e7"
|
||||
"53a85e2c.2728d"
|
||||
]
|
||||
]
|
||||
},
|
||||
{
|
||||
"id": "cc140589.dea168",
|
||||
"id": "9c105726.613a58",
|
||||
"type": "mqtt in",
|
||||
"z": "449c1517.e25f4c",
|
||||
"name": "listen",
|
||||
"topic": "+/devices/+/up",
|
||||
"qos": "2",
|
||||
"broker": "2a15ab6f.ab2244",
|
||||
"x": 110,
|
||||
"y": 120,
|
||||
"x": 90,
|
||||
"y": 127,
|
||||
"wires": [
|
||||
[
|
||||
"4f97d75.6c87528"
|
||||
"113ef524.57edeb"
|
||||
]
|
||||
]
|
||||
},
|
||||
{
|
||||
"id": "72d5e7ee.d1eba8",
|
||||
"id": "1c9a7438.6e38ec",
|
||||
"type": "mqtt out",
|
||||
"z": "449c1517.e25f4c",
|
||||
"name": "send",
|
||||
@ -81,28 +81,28 @@
|
||||
"qos": "",
|
||||
"retain": "",
|
||||
"broker": "2a15ab6f.ab2244",
|
||||
"x": 730,
|
||||
"y": 513,
|
||||
"x": 710,
|
||||
"y": 520,
|
||||
"wires": []
|
||||
},
|
||||
{
|
||||
"id": "4f97d75.6c87528",
|
||||
"id": "113ef524.57edeb",
|
||||
"type": "json",
|
||||
"z": "449c1517.e25f4c",
|
||||
"name": "Convert",
|
||||
"property": "payload",
|
||||
"action": "",
|
||||
"pretty": false,
|
||||
"x": 260,
|
||||
"y": 120,
|
||||
"x": 240,
|
||||
"y": 127,
|
||||
"wires": [
|
||||
[
|
||||
"9f4b8dd3.2f0d2"
|
||||
"120561a.088359e"
|
||||
]
|
||||
]
|
||||
},
|
||||
{
|
||||
"id": "9f4b8dd3.2f0d2",
|
||||
"id": "120561a.088359e",
|
||||
"type": "switch",
|
||||
"z": "449c1517.e25f4c",
|
||||
"name": "Timeport",
|
||||
@ -118,97 +118,98 @@
|
||||
"checkall": "true",
|
||||
"repair": false,
|
||||
"outputs": 1,
|
||||
"x": 420,
|
||||
"y": 120,
|
||||
"x": 400,
|
||||
"y": 127,
|
||||
"wires": [
|
||||
[
|
||||
"8ed813a9.a9319"
|
||||
"d6f27e8e.93242"
|
||||
]
|
||||
]
|
||||
},
|
||||
{
|
||||
"id": "dac8aafa.389298",
|
||||
"id": "90e76b02.6298f8",
|
||||
"type": "json",
|
||||
"z": "449c1517.e25f4c",
|
||||
"name": "Convert",
|
||||
"property": "payload",
|
||||
"action": "",
|
||||
"pretty": false,
|
||||
"x": 580,
|
||||
"y": 513,
|
||||
"x": 560,
|
||||
"y": 520,
|
||||
"wires": [
|
||||
[
|
||||
"72d5e7ee.d1eba8"
|
||||
"1c9a7438.6e38ec"
|
||||
]
|
||||
]
|
||||
},
|
||||
{
|
||||
"id": "8ed813a9.a9319",
|
||||
"id": "d6f27e8e.93242",
|
||||
"type": "base64",
|
||||
"z": "449c1517.e25f4c",
|
||||
"name": "Decode",
|
||||
"action": "",
|
||||
"property": "payload.payload_raw",
|
||||
"x": 580,
|
||||
"y": 120,
|
||||
"x": 560,
|
||||
"y": 127,
|
||||
"wires": [
|
||||
[
|
||||
"831ab883.d6a238"
|
||||
"b8bd33fd.61caa",
|
||||
"cc245719.3c4cd8"
|
||||
]
|
||||
]
|
||||
},
|
||||
{
|
||||
"id": "84f1cda2.069e7",
|
||||
"id": "53a85e2c.2728d",
|
||||
"type": "base64",
|
||||
"z": "449c1517.e25f4c",
|
||||
"name": "Encode",
|
||||
"action": "",
|
||||
"property": "payload.payload_raw",
|
||||
"x": 420,
|
||||
"y": 513,
|
||||
"x": 400,
|
||||
"y": 520,
|
||||
"wires": [
|
||||
[
|
||||
"dac8aafa.389298"
|
||||
"90e76b02.6298f8"
|
||||
]
|
||||
]
|
||||
},
|
||||
{
|
||||
"id": "6190967b.01f758",
|
||||
"id": "15980d22.6f4663",
|
||||
"type": "comment",
|
||||
"z": "449c1517.e25f4c",
|
||||
"name": "LoRaWAN Timeserver v1.1",
|
||||
"name": "LoRaWAN Timeserver v1.21",
|
||||
"info": "PLEASE NOTE: There is a patent filed for the time sync algorithm used in the\ncode of this file. The shown implementation example is covered by the\nrepository's licencse, but you may not be eligible to deploy the applied\nalgorithm in applications without granted license by the patent holder.",
|
||||
"x": 170,
|
||||
"y": 40,
|
||||
"x": 160,
|
||||
"y": 47,
|
||||
"wires": []
|
||||
},
|
||||
{
|
||||
"id": "831ab883.d6a238",
|
||||
"id": "b8bd33fd.61caa",
|
||||
"type": "function",
|
||||
"z": "449c1517.e25f4c",
|
||||
"name": "Timeserver Logic",
|
||||
"func": "/* LoRaWAN Timeserver\n\nconstruct 5 byte timesync_answer from gateway timestamp and node's time_sync_req\n\nbyte meaning\n1..4 current second (from epoch time 1970)\n5 1/250ths fractions of current second\n\nFPort = sequence number (taken from node's time_sync_req)\n\n*/\n\nfunction timecompare(a, b) {\n \n const timeA = a.time;\n const timeB = b.time;\n\n let comparison = 0;\n if (timeA > timeB) {\n comparison = 1;\n } else if (timeA < timeB) {\n comparison = -1;\n }\n return comparison;\n}\n\nlet confidence = 2000; // max millisecond diff gateway time to server time\n\n// guess if we have received a valid time_sync_req command\nif (msg.payload.payload_raw.length != 1)\n return;\n\nvar deviceMsg = { payload: msg.payload.dev_id };\nvar seqNo = msg.payload.payload_raw[0];\nvar seqNoMsg = { payload: seqNo };\nvar gateway_list = msg.payload.metadata.gateways;\n\n// filter all gateway timestamps that have milliseconds part (which we assume have a \".\")\nvar gateways = gateway_list.filter(function (element) {\n return (element.time.includes(\".\"));\n});\n\nvar gateway_time = gateways.map(gw => {\n return {\n time: new Date(gw.time),\n eui: gw.gtw_id,\n }\n });\nvar server_time = new Date(msg.payload.metadata.time);\n\n// validate all gateway timestamps against lorawan server_time (which is assumed to be recent)\nvar gw_timestamps = gateway_time.filter(function (element) {\n return ((element.time > (server_time - confidence) && element.time <= server_time));\n});\n\n// if no timestamp left, we have no valid one and exit\nif (gw_timestamps.length === 0) {\n var notavailMsg = { payload: \"n/a\" };\n var notimeMsg = { payload: 0xff }; \n var buf2 = Buffer.alloc(1);\n msg.payload = new Buffer(buf2.fill(0xff));\n return [notavailMsg, notavailMsg, deviceMsg, seqNoMsg, msg];}\n\n// sort time array in ascending order to find most recent timestamp for time answer\ngw_timestamps.sort(timecompare);\n\nvar timestamp = gw_timestamps[0].time;\nvar eui = gw_timestamps[0].eui;\nvar offset = server_time - timestamp;\n\nvar seconds = Math.floor(timestamp/1000);\nvar fractions = (timestamp % 1000) / 4;\n\nlet buf = new ArrayBuffer(5);\nnew DataView(buf).setUint32(0, seconds);\nnew DataView(buf).setUint8(4, fractions);\n\nmsg.payload = new Buffer(new Uint8Array(buf));\nmsg.port = seqNo;\nvar euiMsg = { payload: eui };\nvar offsetMsg = { payload: offset };\n\nreturn [euiMsg, offsetMsg, deviceMsg, seqNoMsg, msg];",
|
||||
"func": "/* LoRaWAN Timeserver\n\nconstruct 7 byte timesync_answer from gateway timestamp and node's time_sync_req\n\nbyte meaning\n1 sequence number (taken from node's time_sync_req)\n2 timezone in 15 minutes steps\n3..6 current second (from epoch time 1970)\n7 1/250ths fractions of current second\n\n*/\n\nfunction timecompare(a, b) {\n \n const timeA = a.time;\n const timeB = b.time;\n\n let comparison = 0;\n if (timeA > timeB) {\n comparison = 1;\n } else if (timeA < timeB) {\n comparison = -1;\n }\n return comparison;\n}\n\nlet confidence = 2000; // max millisecond diff gateway time to server time\n\n// guess if we have received a valid time_sync_req command\nif (msg.payload.payload_raw.length != 1)\n return;\n\nvar deviceMsg = { payload: msg.payload.dev_id };\nvar seqNo = msg.payload.payload_raw[0];\nvar seqNoMsg = { payload: seqNo };\nvar gateway_list = msg.payload.metadata.gateways;\n\n// filter all gateway timestamps that have milliseconds part (which we assume have a \".\")\nvar gateways = gateway_list.filter(function (element) {\n return (element.time.includes(\".\"));\n});\n\nvar gateway_time = gateways.map(gw => {\n return {\n time: new Date(gw.time),\n eui: gw.gtw_id,\n }\n });\nvar server_time = new Date(msg.payload.metadata.time);\n\n// validate all gateway timestamps against lorawan server_time (which is assumed to be recent)\nvar gw_timestamps = gateway_time.filter(function (element) {\n return ((element.time > (server_time - confidence) && element.time <= server_time));\n});\n\n// if no timestamp left, we have no valid one and exit\nif (gw_timestamps.length === 0) {\n var notavailMsg = { payload: \"n/a\" };\n var notimeMsg = { payload: 0xff }; \n var buf2 = Buffer.alloc(1);\n msg.payload = new Buffer(buf2.fill(0xff));\n msg.port = 9; // Paxcounter TIMEPORT\n return [notavailMsg, notavailMsg, deviceMsg, seqNoMsg, msg];}\n\n// sort time array in ascending order to find most recent timestamp for time answer\ngw_timestamps.sort(timecompare);\n\nvar timestamp = gw_timestamps[0].time;\nvar eui = gw_timestamps[0].eui;\nvar offset = server_time - timestamp;\n\nvar seconds = Math.floor(timestamp/1000);\nvar fractions = (timestamp % 1000) / 4;\n\nlet buf = new ArrayBuffer(7);\nnew DataView(buf).setUint8(0, seqNo);\n// Timezone (in 15min steps)\nvar timezone = 8; // CET = UTC+2h\nnew DataView(buf).setUint8(1, timezone);\nnew DataView(buf).setUint32(2, seconds);\nnew DataView(buf).setUint8(6, fractions);\n\nmsg.payload = new Buffer(new Uint8Array(buf));\nmsg.port = 9; // Paxcounter TIMEPORT\nvar euiMsg = { payload: eui };\nvar offsetMsg = { payload: offset };\n\nreturn [euiMsg, offsetMsg, deviceMsg, seqNoMsg, msg];",
|
||||
"outputs": 5,
|
||||
"noerr": 0,
|
||||
"x": 350,
|
||||
"y": 320,
|
||||
"x": 330,
|
||||
"y": 327,
|
||||
"wires": [
|
||||
[
|
||||
"37722d4b.08e3c2",
|
||||
"a8a04c7a.c5fbd",
|
||||
"a15454a9.fa0948"
|
||||
"c9a83ac9.50fd18",
|
||||
"6aeb3720.a89618",
|
||||
"6ac55bbe.12ac54"
|
||||
],
|
||||
[
|
||||
"46ce842a.614d5c"
|
||||
"de908e66.b6fd3"
|
||||
],
|
||||
[
|
||||
"a5dbb4ef.019168"
|
||||
"d5a35bab.44cb18"
|
||||
],
|
||||
[
|
||||
"1cb58e7f.221362"
|
||||
"3a661f0a.c61b1"
|
||||
],
|
||||
[
|
||||
"49e3c067.e782e"
|
||||
"9b4f492d.fbfd18"
|
||||
]
|
||||
],
|
||||
"outputLabels": [
|
||||
@ -220,7 +221,7 @@
|
||||
]
|
||||
},
|
||||
{
|
||||
"id": "37722d4b.08e3c2",
|
||||
"id": "c9a83ac9.50fd18",
|
||||
"type": "debug",
|
||||
"z": "449c1517.e25f4c",
|
||||
"name": "Timeserver Gw",
|
||||
@ -229,13 +230,13 @@
|
||||
"console": false,
|
||||
"tostatus": true,
|
||||
"complete": "payload",
|
||||
"x": 700,
|
||||
"y": 240,
|
||||
"x": 680,
|
||||
"y": 247,
|
||||
"wires": [],
|
||||
"icon": "node-red/bridge.png"
|
||||
},
|
||||
{
|
||||
"id": "8712a5ac.ed18e8",
|
||||
"id": "247204ab.a9f83c",
|
||||
"type": "ui_text",
|
||||
"z": "449c1517.e25f4c",
|
||||
"group": "edb7cc8d.a3817",
|
||||
@ -246,12 +247,12 @@
|
||||
"label": "Last answer at:",
|
||||
"format": "{{msg.payload}}",
|
||||
"layout": "col-center",
|
||||
"x": 810,
|
||||
"y": 300,
|
||||
"x": 790,
|
||||
"y": 307,
|
||||
"wires": []
|
||||
},
|
||||
{
|
||||
"id": "46ce842a.614d5c",
|
||||
"id": "de908e66.b6fd3",
|
||||
"type": "ui_gauge",
|
||||
"z": "449c1517.e25f4c",
|
||||
"name": "Timeserver offset",
|
||||
@ -272,12 +273,12 @@
|
||||
],
|
||||
"seg1": "",
|
||||
"seg2": "",
|
||||
"x": 710,
|
||||
"y": 380,
|
||||
"x": 690,
|
||||
"y": 387,
|
||||
"wires": []
|
||||
},
|
||||
{
|
||||
"id": "a8a04c7a.c5fbd",
|
||||
"id": "6aeb3720.a89618",
|
||||
"type": "ui_text",
|
||||
"z": "449c1517.e25f4c",
|
||||
"group": "edb7cc8d.a3817",
|
||||
@ -288,28 +289,28 @@
|
||||
"label": "Gateway",
|
||||
"format": "{{msg.payload}}",
|
||||
"layout": "col-center",
|
||||
"x": 700,
|
||||
"y": 340,
|
||||
"x": 680,
|
||||
"y": 347,
|
||||
"wires": []
|
||||
},
|
||||
{
|
||||
"id": "a15454a9.fa0948",
|
||||
"id": "6ac55bbe.12ac54",
|
||||
"type": "function",
|
||||
"z": "449c1517.e25f4c",
|
||||
"name": "Time",
|
||||
"func": "msg.payload = new Date().toLocaleString('en-GB', {timeZone: 'Europe/Berlin'});\nreturn msg;",
|
||||
"outputs": 1,
|
||||
"noerr": 0,
|
||||
"x": 670,
|
||||
"y": 300,
|
||||
"x": 650,
|
||||
"y": 307,
|
||||
"wires": [
|
||||
[
|
||||
"8712a5ac.ed18e8"
|
||||
"247204ab.a9f83c"
|
||||
]
|
||||
]
|
||||
},
|
||||
{
|
||||
"id": "a5dbb4ef.019168",
|
||||
"id": "d5a35bab.44cb18",
|
||||
"type": "ui_text",
|
||||
"z": "449c1517.e25f4c",
|
||||
"group": "edb7cc8d.a3817",
|
||||
@ -320,12 +321,12 @@
|
||||
"label": "Device",
|
||||
"format": "{{msg.payload}}",
|
||||
"layout": "col-center",
|
||||
"x": 700,
|
||||
"y": 420,
|
||||
"x": 680,
|
||||
"y": 427,
|
||||
"wires": []
|
||||
},
|
||||
{
|
||||
"id": "1cb58e7f.221362",
|
||||
"id": "3a661f0a.c61b1",
|
||||
"type": "ui_text",
|
||||
"z": "449c1517.e25f4c",
|
||||
"group": "edb7cc8d.a3817",
|
||||
@ -336,8 +337,22 @@
|
||||
"label": "Sequence",
|
||||
"format": "{{msg.payload}}",
|
||||
"layout": "col-center",
|
||||
"x": 700,
|
||||
"y": 460,
|
||||
"x": 680,
|
||||
"y": 467,
|
||||
"wires": []
|
||||
},
|
||||
{
|
||||
"id": "cc245719.3c4cd8",
|
||||
"type": "debug",
|
||||
"z": "449c1517.e25f4c",
|
||||
"name": "",
|
||||
"active": true,
|
||||
"tosidebar": true,
|
||||
"console": false,
|
||||
"tostatus": false,
|
||||
"complete": "true",
|
||||
"x": 860,
|
||||
"y": 140,
|
||||
"wires": []
|
||||
},
|
||||
{
|
||||
|
@ -15,12 +15,12 @@ esp_err_t err;
|
||||
|
||||
// populate cfg vars with factory settings
|
||||
void defaultConfig() {
|
||||
cfg.loradr = LORADRDEFAULT; // 0-15, lora datarate, see pacounter.conf
|
||||
cfg.loradr = LORADRDEFAULT; // 0-15, lora datarate, see paxcounter.conf
|
||||
cfg.txpower = LORATXPOWDEFAULT; // 0-15, lora tx power
|
||||
cfg.adrmode = 1; // 0=disabled, 1=enabled
|
||||
cfg.screensaver = 0; // 0=disabled, 1=enabled
|
||||
cfg.screenon = 1; // 0=disabled, 1=enabled
|
||||
cfg.countermode = 0; // 0=cyclic, 1=cumulative, 2=cyclic confirmed
|
||||
cfg.countermode = COUNTERMODE; // 0=cyclic, 1=cumulative, 2=cyclic confirmed
|
||||
cfg.rssilimit = 0; // threshold for rssilimiter, negative value!
|
||||
cfg.sendcycle = SENDCYCLE; // payload send cycle [seconds/2]
|
||||
cfg.wifichancycle =
|
||||
@ -179,7 +179,7 @@ void saveConfig() {
|
||||
|
||||
// set and save cfg.version
|
||||
void migrateVersion() {
|
||||
sprintf(cfg.version, "%s", PROGVERSION);
|
||||
snprintf(cfg.version, 10, "%s", PROGVERSION);
|
||||
ESP_LOGI(TAG, "version set to %s", cfg.version);
|
||||
saveConfig();
|
||||
}
|
||||
|
@ -128,5 +128,9 @@ void reset_counters() {
|
||||
macs_total = 0; // reset all counters
|
||||
macs_wifi = 0;
|
||||
macs_ble = 0;
|
||||
#ifdef HAS_DISPLAY
|
||||
oledPlotCurve(0, true);
|
||||
#endif
|
||||
|
||||
#endif
|
||||
}
|
528
src/display.cpp
528
src/display.cpp
@ -4,116 +4,142 @@
|
||||
|
||||
Display-Mask (128 x 64 pixel):
|
||||
|
||||
| 111111
|
||||
|0123456789012345
|
||||
------------------
|
||||
0|PAX:aabbccddee
|
||||
1|PAX:aabbccddee
|
||||
2|B:a.bcV Sats:ab
|
||||
3|BLTH:abcde SFab
|
||||
4|WIFI:abcde ch:ab
|
||||
5|RLIM:abcd abcdKB
|
||||
6|20:27:00* 27.Feb
|
||||
7|yyyyyyyyyyyyyyab
|
||||
| | |
|
||||
| 11111111112
|
||||
|012345678901234567890 Font
|
||||
----------------------- ---------
|
||||
0|PAX:aabbccdd STRETCHED
|
||||
1|PAX:aabbccdd STRETCHED
|
||||
2|
|
||||
3|B:a.bcV Sats:ab ch:ab SMALL
|
||||
4|WIFI:abcde BLTH:abcde SMALL
|
||||
5|RLIM:abcd Mem:abcdKB SMALL
|
||||
6|27.Feb 2019 20:27:00* SMALL
|
||||
7|yyyyyyyyyyyyy xx SFab SMALL
|
||||
|
||||
line 6: * = char {L|G|R|?} indicates time source,
|
||||
inverse = clock controller is active,
|
||||
pulsed = pps input signal is active
|
||||
* = char {L|G|R|?} indicates time source,
|
||||
inverse = clock controller is active,
|
||||
pulsed = pps input signal is active
|
||||
|
||||
line 7: y = LMIC event message; ab = payload queue length
|
||||
y = LMIC event message
|
||||
xx = payload sendqueue length
|
||||
ab = LMIC spread factor
|
||||
|
||||
FONT_SMALL: 6x8px = 21 chars / line
|
||||
FONT_NORMAL: 8x8px = 16 chars / line
|
||||
FONT_STRETCHED: 16x32px = 8 chars / line
|
||||
|
||||
*/
|
||||
|
||||
// Basic Config
|
||||
#include "globals.h"
|
||||
#include <ss_oled.h>
|
||||
#include <esp_spi_flash.h> // needed for reading ESP32 chip attributes
|
||||
|
||||
#define DISPLAY_PAGES (4) // number of display pages
|
||||
// local Tag for logging
|
||||
static const char TAG[] = __FILE__;
|
||||
|
||||
HAS_DISPLAY u8x8(MY_OLED_RST, MY_OLED_SCL, MY_OLED_SDA);
|
||||
#define DISPLAY_PAGES (6) // number of paxcounter display pages
|
||||
|
||||
// helper arry for converting month values to text
|
||||
// settings for oled display library
|
||||
#define USE_BACKBUFFER
|
||||
|
||||
// settings for qr code generator
|
||||
#define QR_VERSION 3 // 29 x 29px
|
||||
#define QR_SCALEFACTOR 2 // 29 -> 58x < 64px
|
||||
|
||||
// settings for curve plotter
|
||||
#define DISPLAY_WIDTH 128 // Width in pixels of OLED-display, must be 32X
|
||||
#define DISPLAY_HEIGHT 64 // Height in pixels of OLED-display, must be 64X
|
||||
|
||||
// helper array for converting month values to text
|
||||
const char *printmonth[] = {"xxx", "Jan", "Feb", "Mar", "Apr", "May", "Jun",
|
||||
"Jul", "Aug", "Sep", "Oct", "Nov", "Dec"};
|
||||
|
||||
uint8_t DisplayIsOn = 0;
|
||||
uint8_t displaybuf[DISPLAY_WIDTH * DISPLAY_HEIGHT / 8] = {0};
|
||||
|
||||
// helper function, prints a hex key on display
|
||||
void DisplayKey(const uint8_t *key, uint8_t len, bool lsb) {
|
||||
const uint8_t *p;
|
||||
for (uint8_t i = 0; i < len; i++) {
|
||||
p = lsb ? key + len - i - 1 : key + i;
|
||||
u8x8.printf("%02X", *p);
|
||||
}
|
||||
u8x8.printf("\n");
|
||||
}
|
||||
QRCode qrcode;
|
||||
|
||||
void init_display(const char *Productname, const char *Version) {
|
||||
void init_display(uint8_t verbose) {
|
||||
|
||||
// block i2c bus access
|
||||
if (!I2C_MUTEX_LOCK())
|
||||
ESP_LOGV(TAG, "[%0.3f] i2c mutex lock failed", millis() / 1000.0);
|
||||
else {
|
||||
// show startup screen
|
||||
uint8_t buf[32];
|
||||
u8x8.begin();
|
||||
u8x8.setFont(u8x8_font_chroma48medium8_r);
|
||||
u8x8.clear();
|
||||
u8x8.setFlipMode(0);
|
||||
u8x8.setInverseFont(1);
|
||||
u8x8.draw2x2String(0, 0, Productname);
|
||||
u8x8.setInverseFont(0);
|
||||
u8x8.draw2x2String(2, 2, Productname);
|
||||
delay(500);
|
||||
u8x8.clear();
|
||||
u8x8.setFlipMode(1);
|
||||
u8x8.setInverseFont(1);
|
||||
u8x8.draw2x2String(0, 0, Productname);
|
||||
u8x8.setInverseFont(0);
|
||||
u8x8.draw2x2String(2, 2, Productname);
|
||||
delay(500);
|
||||
|
||||
u8x8.setFlipMode(0);
|
||||
u8x8.clear();
|
||||
|
||||
#ifdef DISPLAY_FLIP
|
||||
u8x8.setFlipMode(1);
|
||||
// is we have display RST line we toggle it to re-initialize display
|
||||
#ifdef MY_OLED_RST
|
||||
pinMode(MY_OLED_RST, OUTPUT);
|
||||
digitalWrite(MY_OLED_RST, 0); // iniialization of SSD1306 chip is executed
|
||||
delay(1); // keep RES low for at least 3us according to SSD1306 datasheet
|
||||
digitalWrite(MY_OLED_RST, 1); // normal operation
|
||||
#endif
|
||||
|
||||
// Display chip information
|
||||
// init display
|
||||
#ifndef DISPLAY_FLIP
|
||||
oledInit(OLED_128x64, ANGLE_0, false, -1, -1, 400000L);
|
||||
#else
|
||||
oledInit(OLED_128x64, ANGLE_FLIPY, false, -1, -1, 400000L);
|
||||
#endif
|
||||
|
||||
// clear display
|
||||
oledSetContrast(DISPLAYCONTRAST);
|
||||
oledFill(0, 1);
|
||||
|
||||
if (verbose) {
|
||||
|
||||
// show startup screen
|
||||
// to come -> display .bmp file with logo
|
||||
|
||||
// show chip information
|
||||
#if (VERBOSE)
|
||||
esp_chip_info_t chip_info;
|
||||
esp_chip_info(&chip_info);
|
||||
u8x8.printf("ESP32 %d cores\nWiFi%s%s\n", chip_info.cores,
|
||||
esp_chip_info_t chip_info;
|
||||
esp_chip_info(&chip_info);
|
||||
dp_printf(0, 0, 0, 0, "** PAXCOUNTER **");
|
||||
dp_printf(0, 1, 0, 0, "Software v%s", PROGVERSION);
|
||||
dp_printf(0, 3, 0, 0, "ESP32 %d cores", chip_info.cores);
|
||||
dp_printf(0, 4, 0, 0, "Chip Rev.%d", chip_info.revision);
|
||||
dp_printf(0, 5, 0, 0, "WiFi%s%s",
|
||||
(chip_info.features & CHIP_FEATURE_BT) ? "/BT" : "",
|
||||
(chip_info.features & CHIP_FEATURE_BLE) ? "/BLE" : "");
|
||||
u8x8.printf("ESP Rev.%d\n", chip_info.revision);
|
||||
u8x8.printf("%dMB %s Flash\n", spi_flash_get_chip_size() / (1024 * 1024),
|
||||
dp_printf(0, 6, 0, 0, "%dMB %s Flash",
|
||||
spi_flash_get_chip_size() / (1024 * 1024),
|
||||
(chip_info.features & CHIP_FEATURE_EMB_FLASH) ? "int."
|
||||
: "ext.");
|
||||
|
||||
// give user some time to read or take picture
|
||||
oledDumpBuffer(NULL);
|
||||
delay(2000);
|
||||
oledFill(0x00, 1);
|
||||
#endif // VERBOSE
|
||||
|
||||
u8x8.print(Productname);
|
||||
u8x8.print(" v");
|
||||
u8x8.println(PROGVERSION);
|
||||
|
||||
#if (HAS_LORA)
|
||||
u8x8.println("DEVEUI:");
|
||||
os_getDevEui((u1_t *)buf);
|
||||
DisplayKey(buf, 8, true);
|
||||
delay(3000);
|
||||
// generate DEVEUI as QR code and text
|
||||
uint8_t buf[8];
|
||||
char deveui[17];
|
||||
os_getDevEui((u1_t *)buf);
|
||||
snprintf(deveui, 17, "%016llX", *((uint64_t *)&buf));
|
||||
|
||||
// display DEVEUI as QR code on the left
|
||||
oledSetContrast(30);
|
||||
dp_printqr(3, 3, deveui);
|
||||
|
||||
// display DEVEUI as plain text on the right
|
||||
dp_printf(72, 0, FONT_NORMAL, 0, "LORAWAN");
|
||||
dp_printf(72, 1, FONT_NORMAL, 0, "DEVEUI:");
|
||||
for (uint8_t i = 0; i <= 3; i++)
|
||||
dp_printf(80, i + 3, FONT_NORMAL, 0, "%4.4s", deveui + i * 4);
|
||||
|
||||
// give user some time to read or take picture
|
||||
oledDumpBuffer(NULL);
|
||||
delay(8000);
|
||||
oledSetContrast(DISPLAYCONTRAST);
|
||||
oledFill(0x00, 1);
|
||||
#endif // HAS_LORA
|
||||
u8x8.clear();
|
||||
u8x8.setPowerSave(!cfg.screenon); // set display off if disabled
|
||||
u8x8.draw2x2String(0, 0, "PAX:0");
|
||||
#if (BLECOUNTER)
|
||||
u8x8.setCursor(0, 3);
|
||||
u8x8.printf("BLTH:0");
|
||||
#endif
|
||||
u8x8.setCursor(0, 4);
|
||||
u8x8.printf("WIFI:0");
|
||||
u8x8.setCursor(0, 5);
|
||||
u8x8.printf(!cfg.rssilimit ? "RLIM:off " : "RLIM:%d", cfg.rssilimit);
|
||||
|
||||
} // verbose
|
||||
|
||||
oledPower(cfg.screenon); // set display off if disabled
|
||||
|
||||
I2C_MUTEX_UNLOCK(); // release i2c bus access
|
||||
} // mutex
|
||||
@ -123,6 +149,9 @@ void refreshTheDisplay(bool nextPage) {
|
||||
|
||||
static uint8_t DisplayPage = 0;
|
||||
|
||||
// update histogram if we have a display
|
||||
oledPlotCurve(macs.size(), false);
|
||||
|
||||
// if display is switched off we don't refresh it to relax cpu
|
||||
if (!DisplayIsOn && (DisplayIsOn == cfg.screenon))
|
||||
return;
|
||||
@ -137,15 +166,16 @@ void refreshTheDisplay(bool nextPage) {
|
||||
// set display on/off according to current device configuration
|
||||
if (DisplayIsOn != cfg.screenon) {
|
||||
DisplayIsOn = cfg.screenon;
|
||||
u8x8.setPowerSave(!cfg.screenon);
|
||||
oledPower(cfg.screenon);
|
||||
}
|
||||
|
||||
if (nextPage) {
|
||||
DisplayPage = (DisplayPage >= DISPLAY_PAGES - 1) ? 0 : (DisplayPage + 1);
|
||||
u8x8.clear();
|
||||
oledFill(0, 1);
|
||||
}
|
||||
|
||||
draw_page(t, DisplayPage);
|
||||
oledDumpBuffer(NULL);
|
||||
|
||||
I2C_MUTEX_UNLOCK(); // release i2c bus access
|
||||
|
||||
@ -154,191 +184,155 @@ void refreshTheDisplay(bool nextPage) {
|
||||
|
||||
void draw_page(time_t t, uint8_t page) {
|
||||
|
||||
char timeState, buff[16];
|
||||
uint8_t msgWaiting;
|
||||
char timeState;
|
||||
#if (HAS_GPS)
|
||||
static bool wasnofix = true;
|
||||
#endif
|
||||
|
||||
// update counter (lines 0-1)
|
||||
snprintf(
|
||||
buff, sizeof(buff), "PAX:%-4d",
|
||||
(int)macs.size()); // convert 16-bit MAC counter to decimal counter value
|
||||
u8x8.draw2x2String(0, 0,
|
||||
buff); // display number on unique macs total Wifi + BLE
|
||||
// line 1/2: pax counter
|
||||
dp_printf(0, 0, FONT_STRETCHED, 0, "PAX:%-4d",
|
||||
macs.size()); // display number of unique macs total Wifi + BLE
|
||||
|
||||
switch (page % DISPLAY_PAGES) {
|
||||
|
||||
// page 0: parameters overview
|
||||
// page 1: time
|
||||
// page 1: pax graph
|
||||
// page 2: GPS
|
||||
// page 3: BME280/680
|
||||
// page 4: time
|
||||
// page 5: blank screen
|
||||
|
||||
// page 0: parameters overview
|
||||
case 0:
|
||||
|
||||
// update Battery status (line 2)
|
||||
#if (defined BAT_MEASURE_ADC || defined HAS_PMU)
|
||||
u8x8.setCursor(0, 2);
|
||||
if (batt_voltage == 0xffff)
|
||||
u8x8.printf("B:USB ");
|
||||
else
|
||||
u8x8.printf("B:%.2fV", batt_voltage / 1000.0);
|
||||
#endif
|
||||
|
||||
// update GPS status (line 2)
|
||||
#if (HAS_GPS)
|
||||
u8x8.setCursor(9, 2);
|
||||
if (gps.location.age() < 1500) // if no fix then display Sats value inverse
|
||||
u8x8.printf("Sats:%.2d", gps.satellites.value());
|
||||
else {
|
||||
u8x8.setInverseFont(1);
|
||||
u8x8.printf("Sats:%.2d", gps.satellites.value());
|
||||
u8x8.setInverseFont(0);
|
||||
}
|
||||
#endif
|
||||
|
||||
// update bluetooth counter + LoRa SF (line 3)
|
||||
// line 3: wifi + bluetooth counters
|
||||
dp_printf(0, 3, FONT_SMALL, 0, "WIFI:%-5d", macs_wifi);
|
||||
#if (BLECOUNTER)
|
||||
u8x8.setCursor(0, 3);
|
||||
if (cfg.blescan)
|
||||
u8x8.printf("BLTH:%-5d", macs_ble);
|
||||
dp_printf(66, 3, FONT_SMALL, 0, "BLTH:%-5d", macs_ble);
|
||||
else
|
||||
u8x8.printf("%s", "BLTH:off");
|
||||
dp_printf(66, 3, FONT_SMALL, 0, "%s", "BLTH:off");
|
||||
#endif
|
||||
|
||||
#if (HAS_LORA)
|
||||
u8x8.setCursor(12, 3);
|
||||
if (!cfg.adrmode) // if ADR=off then display SF value inverse
|
||||
u8x8.setInverseFont(1);
|
||||
u8x8.printf("%-4s", getSfName(updr2rps(LMIC.datarate)));
|
||||
if (!cfg.adrmode) // switch off inverse if it was turned on
|
||||
u8x8.setInverseFont(0);
|
||||
#endif // HAS_LORA
|
||||
// line 4: Battery + GPS status + Wifi channel
|
||||
#if (defined BAT_MEASURE_ADC || defined HAS_PMU)
|
||||
if (batt_voltage == 0xffff)
|
||||
dp_printf(0, 4, FONT_SMALL, 0, "%s", "USB ");
|
||||
else if (batt_voltage == 0)
|
||||
dp_printf(0, 4, FONT_SMALL, 0, "%s", "No batt");
|
||||
else
|
||||
dp_printf(0, 4, FONT_SMALL, 0, "B:%.2fV", batt_voltage / 1000.0);
|
||||
#endif
|
||||
#if (HAS_GPS)
|
||||
if (gps.location.age() < 1500) // if no fix then display Sats value inverse
|
||||
dp_printf(48, 4, FONT_SMALL, 0, "Sats:%.2d", gps.satellites.value());
|
||||
else
|
||||
dp_printf(48, 4, FONT_SMALL, 1, "Sats:%.2d", gps.satellites.value());
|
||||
#endif
|
||||
dp_printf(96, 4, FONT_SMALL, 0, "ch:%02d", channel);
|
||||
|
||||
// line 4: update wifi counter + channel display
|
||||
u8x8.setCursor(0, 4);
|
||||
u8x8.printf("WIFI:%-5d", macs_wifi);
|
||||
u8x8.setCursor(11, 4);
|
||||
u8x8.printf("ch:%02d", channel);
|
||||
// line 5: RSSI limiter + free memory
|
||||
dp_printf(0, 5, FONT_SMALL, 0, !cfg.rssilimit ? "RLIM:off " : "RLIM:%-4d",
|
||||
cfg.rssilimit);
|
||||
dp_printf(66, 5, FONT_SMALL, 0, "Mem:%4dKB", getFreeRAM() / 1024);
|
||||
|
||||
// line 5: update RSSI limiter status & free memory display
|
||||
u8x8.setCursor(0, 5);
|
||||
u8x8.printf(!cfg.rssilimit ? "RLIM:off " : "RLIM:%-4d", cfg.rssilimit);
|
||||
u8x8.setCursor(10, 5);
|
||||
u8x8.printf("%4dKB", getFreeRAM() / 1024);
|
||||
|
||||
// line 6: update time-of-day or LoRa status display
|
||||
u8x8.setCursor(0, 6);
|
||||
// line 6: time + date
|
||||
#if (TIME_SYNC_INTERVAL)
|
||||
// we want a systime display instead LoRa status
|
||||
timeState = TimePulseTick ? ' ' : timeSetSymbols[timeSource];
|
||||
TimePulseTick = false;
|
||||
|
||||
dp_printf(0, 6, FONT_SMALL, 0, "%02d.%3s %4d", day(t), printmonth[month(t)],
|
||||
year(t));
|
||||
dp_printf(72, 6, FONT_SMALL, 0, "%02d:%02d:%02d", hour(t), minute(t),
|
||||
second(t));
|
||||
|
||||
// display inverse timeState if clock controller is enabled
|
||||
#if (defined HAS_DCF77) || (defined HAS_IF482)
|
||||
u8x8.printf("%02d:%02d:%02d", hour(t), minute(t), second(t));
|
||||
u8x8.setInverseFont(1);
|
||||
u8x8.printf("%c", timeState);
|
||||
u8x8.setInverseFont(0);
|
||||
dp_printf(120, 6, FONT_SMALL, 1, "%c", timeState);
|
||||
#else
|
||||
u8x8.printf("%02d:%02d:%02d%c", hour(t), minute(t), second(t), timeState);
|
||||
#endif // HAS_DCF77 || HAS_IF482
|
||||
if (timeSource != _unsynced)
|
||||
u8x8.printf(" %2d.%3s", day(t), printmonth[month(t)]);
|
||||
dp_printf(120, 6, FONT_SMALL, 0, "%c", timeState);
|
||||
#endif
|
||||
|
||||
#endif // TIME_SYNC_INTERVAL
|
||||
|
||||
// line 7: LORA network status
|
||||
#if (HAS_LORA)
|
||||
// line 7: update LMiC event display
|
||||
u8x8.setCursor(0, 7);
|
||||
u8x8.printf("%-14s", lmic_event_msg);
|
||||
|
||||
// update LoRa send queue display
|
||||
msgWaiting = uxQueueMessagesWaiting(LoraSendQueue);
|
||||
if (msgWaiting) {
|
||||
sprintf(buff, "%2d", msgWaiting);
|
||||
u8x8.setCursor(14, 7);
|
||||
u8x8.printf("%-2s", msgWaiting == SEND_QUEUE_SIZE ? "<>" : buff);
|
||||
} else
|
||||
u8x8.printf(" ");
|
||||
// LMiC event display
|
||||
dp_printf(0, 7, FONT_SMALL, 0, "%-16s", lmic_event_msg);
|
||||
// LORA datarate, display inverse if ADR disabled
|
||||
dp_printf(102, 7, FONT_SMALL, !cfg.adrmode, "%-4s",
|
||||
getSfName(updr2rps(LMIC.datarate)));
|
||||
#endif // HAS_LORA
|
||||
|
||||
break; // page0
|
||||
|
||||
// page 1: pax graph
|
||||
case 1:
|
||||
|
||||
// line 4-5: update time-of-day
|
||||
snprintf(buff, sizeof(buff), "%02d:%02d:%02d", hour(t), minute(t),
|
||||
second(t));
|
||||
u8x8.draw2x2String(0, 4, buff);
|
||||
|
||||
oledDumpBuffer(displaybuf);
|
||||
break; // page1
|
||||
|
||||
// page 2: GPS
|
||||
case 2:
|
||||
// update counter (lines 0-1)
|
||||
snprintf(
|
||||
buff, sizeof(buff), "PAX:%-4d",
|
||||
(int)
|
||||
macs.size()); // convert 16-bit MAC counter to decimal counter value
|
||||
u8x8.draw2x2String(0, 0,
|
||||
buff); // display number on unique macs total Wifi + BLE
|
||||
|
||||
#if (HAS_GPS)
|
||||
if (gps.location.age() < 1500) {
|
||||
// line 5: clear "No fix"
|
||||
if (wasnofix) {
|
||||
snprintf(buff, sizeof(buff), " ");
|
||||
u8x8.draw2x2String(2, 5, buff);
|
||||
dp_printf(16, 5, FONT_STRETCHED, 0, " ");
|
||||
wasnofix = false;
|
||||
}
|
||||
// line 3-4: GPS latitude
|
||||
snprintf(buff, sizeof(buff), "%c%07.4f",
|
||||
gps.location.rawLat().negative ? 'S' : 'N', gps.location.lat());
|
||||
u8x8.draw2x2String(0, 3, buff);
|
||||
dp_printf(0, 3, FONT_STRETCHED, 0, "%c%07.4f",
|
||||
gps.location.rawLat().negative ? 'S' : 'N', gps.location.lat());
|
||||
|
||||
// line 6-7: GPS longitude
|
||||
snprintf(buff, sizeof(buff), "%c%07.4f",
|
||||
gps.location.rawLat().negative ? 'W' : 'E', gps.location.lng());
|
||||
u8x8.draw2x2String(0, 6, buff);
|
||||
dp_printf(0, 6, FONT_STRETCHED, 0, "%c%07.4f",
|
||||
gps.location.rawLat().negative ? 'W' : 'E', gps.location.lng());
|
||||
|
||||
} else {
|
||||
snprintf(buff, sizeof(buff), "No fix");
|
||||
u8x8.setInverseFont(1);
|
||||
u8x8.draw2x2String(2, 5, buff);
|
||||
u8x8.setInverseFont(0);
|
||||
dp_printf(16, 5, FONT_STRETCHED, 1, "No fix");
|
||||
wasnofix = true;
|
||||
}
|
||||
|
||||
#else
|
||||
snprintf(buff, sizeof(buff), "No GPS");
|
||||
u8x8.draw2x2String(2, 5, buff);
|
||||
dp_printf(16, 5, FONT_STRETCHED, 1, "No GPS");
|
||||
#endif
|
||||
|
||||
break; // page2
|
||||
|
||||
// page 3: BME280/680
|
||||
case 3:
|
||||
|
||||
#if (HAS_BME)
|
||||
// line 2-3: Temp
|
||||
snprintf(buff, sizeof(buff), "TMP:%-2.1f", bme_status.temperature);
|
||||
u8x8.draw2x2String(0, 2, buff);
|
||||
dp_printf(0, 2, FONT_STRETCHED, 0, "TMP:%-2.1f", bme_status.temperature);
|
||||
|
||||
// line 4-5: Hum
|
||||
snprintf(buff, sizeof(buff), "HUM:%-2.1f", bme_status.humidity);
|
||||
u8x8.draw2x2String(0, 4, buff);
|
||||
dp_printf(0, 4, FONT_STRETCHED, 0, "HUM:%-2.1f", bme_status.humidity);
|
||||
|
||||
#ifdef HAS_BME680
|
||||
// line 6-7: IAQ
|
||||
snprintf(buff, sizeof(buff), "IAQ:%-3.0f", bme_status.iaq);
|
||||
u8x8.draw2x2String(0, 6, buff);
|
||||
dp_printf(0, 6, FONT_STRETCHED, 0, "IAQ:%-3.0f", bme_status.iaq);
|
||||
#endif
|
||||
|
||||
#else
|
||||
snprintf(buff, sizeof(buff), "No BME");
|
||||
u8x8.draw2x2String(2, 5, buff);
|
||||
dp_printf(16, 5, FONT_STRETCHED, 1, "No BME");
|
||||
#endif
|
||||
|
||||
break; // page3
|
||||
|
||||
// page 4: time
|
||||
case 4:
|
||||
|
||||
dp_printf(0, 4, FONT_LARGE, 0, "%02d:%02d:%02d", hour(t), minute(t),
|
||||
second(t));
|
||||
break;
|
||||
|
||||
// page 5: blank screen
|
||||
case 5:
|
||||
|
||||
oledFill(0, 1);
|
||||
break;
|
||||
|
||||
default:
|
||||
break; // default
|
||||
|
||||
@ -346,4 +340,156 @@ void draw_page(time_t t, uint8_t page) {
|
||||
|
||||
} // draw_page
|
||||
|
||||
// display helper functions
|
||||
void dp_printf(uint16_t x, uint16_t y, uint8_t font, uint8_t inv,
|
||||
const char *format, ...) {
|
||||
char loc_buf[64];
|
||||
char *temp = loc_buf;
|
||||
va_list arg;
|
||||
va_list copy;
|
||||
va_start(arg, format);
|
||||
va_copy(copy, arg);
|
||||
int len = vsnprintf(temp, sizeof(loc_buf), format, copy);
|
||||
va_end(copy);
|
||||
if (len < 0) {
|
||||
va_end(arg);
|
||||
return;
|
||||
};
|
||||
if (len >= sizeof(loc_buf)) {
|
||||
temp = (char *)malloc(len + 1);
|
||||
if (temp == NULL) {
|
||||
va_end(arg);
|
||||
return;
|
||||
}
|
||||
len = vsnprintf(temp, len + 1, format, arg);
|
||||
}
|
||||
va_end(arg);
|
||||
oledWriteString(0, x, y, temp, font, inv, false);
|
||||
if (temp != loc_buf) {
|
||||
free(temp);
|
||||
}
|
||||
}
|
||||
|
||||
void dp_printqr(uint16_t offset_x, uint16_t offset_y, const char *Message) {
|
||||
uint8_t qrcodeData[qrcode_getBufferSize(QR_VERSION)];
|
||||
qrcode_initText(&qrcode, qrcodeData, QR_VERSION, ECC_HIGH, Message);
|
||||
|
||||
// draw QR code
|
||||
for (uint16_t y = 0; y < qrcode.size; y++)
|
||||
for (uint16_t x = 0; x < qrcode.size; x++)
|
||||
if (!qrcode_getModule(&qrcode, x, y)) // "black"
|
||||
oledfillRect(x * QR_SCALEFACTOR + offset_x,
|
||||
y * QR_SCALEFACTOR + offset_y, QR_SCALEFACTOR,
|
||||
QR_SCALEFACTOR, false);
|
||||
// draw horizontal frame lines
|
||||
oledfillRect(0, 0, qrcode.size * QR_SCALEFACTOR + 2 * offset_x, offset_y,
|
||||
false);
|
||||
oledfillRect(0, qrcode.size * QR_SCALEFACTOR + offset_y,
|
||||
qrcode.size * QR_SCALEFACTOR + 2 * offset_x, offset_y, false);
|
||||
// draw vertical frame lines
|
||||
oledfillRect(0, 0, offset_x, qrcode.size * QR_SCALEFACTOR + 2 * offset_y,
|
||||
false);
|
||||
oledfillRect(qrcode.size * QR_SCALEFACTOR + offset_x, 0, offset_x,
|
||||
qrcode.size * QR_SCALEFACTOR + 2 * offset_y, false);
|
||||
}
|
||||
|
||||
void oledfillRect(uint16_t x, uint16_t y, uint16_t width, uint16_t height,
|
||||
uint8_t bRender) {
|
||||
for (uint16_t xi = x; xi < x + width; xi++)
|
||||
oledDrawLine(xi, y, xi, y + height - 1, bRender);
|
||||
}
|
||||
|
||||
int oledDrawPixel(uint8_t *buf, const uint16_t x, const uint16_t y,
|
||||
const uint8_t dot) {
|
||||
|
||||
if (x > DISPLAY_WIDTH || y > DISPLAY_HEIGHT)
|
||||
return -1;
|
||||
|
||||
uint8_t bit = y & 7;
|
||||
uint16_t idx = y / 8 * DISPLAY_WIDTH + x;
|
||||
|
||||
buf[idx] &= ~(1 << bit); // clear pixel
|
||||
if (dot)
|
||||
buf[idx] |= (1 << bit); // set pixel
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void oledScrollBufferHorizontal(uint8_t *buf, const uint16_t width,
|
||||
const uint16_t height, bool left) {
|
||||
|
||||
uint16_t col, page, idx = 0;
|
||||
|
||||
for (page = 0; page < height / 8; page++) {
|
||||
if (left) { // scroll left
|
||||
for (col = 0; col < width - 1; col++) {
|
||||
idx = page * width + col;
|
||||
buf[idx] = buf[idx + 1];
|
||||
}
|
||||
buf[idx + 1] = 0;
|
||||
} else // scroll right
|
||||
{
|
||||
for (col = width - 1; col > 0; col--) {
|
||||
idx = page * width + col;
|
||||
buf[idx] = buf[idx - 1];
|
||||
}
|
||||
buf[idx - 1] = 0;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void oledScrollBufferVertical(uint8_t *buf, const uint16_t width,
|
||||
const uint16_t height, int offset) {
|
||||
|
||||
uint64_t buf_col;
|
||||
|
||||
if (!offset)
|
||||
return; // nothing to do
|
||||
|
||||
for (uint16_t col = 0; col < DISPLAY_WIDTH; col++) {
|
||||
// convert column bytes from display buffer to uint64_t
|
||||
buf_col = *(uint64_t *)&buf[col * DISPLAY_HEIGHT / 8];
|
||||
|
||||
if (offset > 0) // scroll down
|
||||
buf_col <<= offset;
|
||||
else // scroll up
|
||||
buf_col >>= abs(offset);
|
||||
|
||||
// write back uint64_t to uint8_t display buffer
|
||||
*(uint64_t *)&buf[col * DISPLAY_HEIGHT / 8] = buf_col;
|
||||
}
|
||||
}
|
||||
|
||||
void oledPlotCurve(uint16_t count, bool reset) {
|
||||
|
||||
static uint16_t last_count = 0, col = 0, row = 0;
|
||||
uint16_t v_scroll = 0;
|
||||
|
||||
if ((last_count == count) && !reset)
|
||||
return;
|
||||
|
||||
if (reset) { // next count cycle?
|
||||
if (col < DISPLAY_WIDTH - 1) // matrix not full -> increment column
|
||||
col++;
|
||||
else // matrix full -> scroll left 1 dot
|
||||
oledScrollBufferHorizontal(displaybuf, DISPLAY_WIDTH, DISPLAY_HEIGHT,
|
||||
true);
|
||||
|
||||
} else // clear current dot
|
||||
oledDrawPixel(displaybuf, col, row, 0);
|
||||
|
||||
// scroll down, if necessary
|
||||
while ((count - v_scroll) > DISPLAY_HEIGHT - 1)
|
||||
v_scroll++;
|
||||
if (v_scroll)
|
||||
oledScrollBufferVertical(displaybuf, DISPLAY_WIDTH, DISPLAY_HEIGHT,
|
||||
v_scroll);
|
||||
|
||||
// set new dot
|
||||
// row = DISPLAY_HEIGHT - 1 - (count - v_scroll) % DISPLAY_HEIGHT;
|
||||
row = DISPLAY_HEIGHT - 1 - count - v_scroll;
|
||||
last_count = count;
|
||||
oledDrawPixel(displaybuf, col, row, 1);
|
||||
}
|
||||
|
||||
#endif // HAS_DISPLAY
|
@ -1,5 +1,5 @@
|
||||
// clang-format off
|
||||
// upload_speed 115200
|
||||
// upload_speed 921600
|
||||
// board esp32dev
|
||||
|
||||
#ifndef _EBOX_H
|
||||
|
@ -1,5 +1,5 @@
|
||||
// clang-format off
|
||||
// upload_speed 115200
|
||||
// upload_speed 921600
|
||||
// board esp32dev
|
||||
|
||||
|
||||
|
@ -12,7 +12,7 @@
|
||||
|
||||
//#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
|
||||
|
||||
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
|
||||
#define HAS_DISPLAY 1
|
||||
//#define DISPLAY_FLIP 1 // use if display is rotated
|
||||
#define BAT_MEASURE_ADC ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
|
||||
#define BAT_VOLTAGE_DIVIDER ((82.0+220.0)/82.0) // 82k + 220k 1%
|
||||
@ -29,7 +29,7 @@
|
||||
// Pins for I2C interface of OLED Display
|
||||
#define MY_OLED_SDA SDA
|
||||
#define MY_OLED_SCL SCL
|
||||
#define MY_OLED_RST U8X8_PIN_NONE
|
||||
#define MY_OLED_RST NOT_A_PIN
|
||||
|
||||
// Settings for on board DS3231 RTC chip
|
||||
// note: to use RTC_INT, capacitor 100nF next to red LED must be removed to sharpen interrupt signal slope
|
||||
|
@ -44,7 +44,7 @@
|
||||
#define BOARD_HAS_PSRAM // use if board has external PSRAM
|
||||
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
|
||||
|
||||
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
|
||||
#define HAS_DISPLAY 1
|
||||
//#define DISPLAY_FLIP 1 // use if display is rotated
|
||||
#define BAT_MEASURE_ADC ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
|
||||
#define BAT_VOLTAGE_DIVIDER 2 // voltage divider 100k/100k on board
|
||||
|
@ -16,7 +16,7 @@
|
||||
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
|
||||
#define CFG_sx1276_radio 1
|
||||
|
||||
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board
|
||||
#define HAS_DISPLAY 1 // OLED-Display on board
|
||||
#define HAS_LED LED_BUILTIN // white LED on board
|
||||
#define HAS_BUTTON KEY_BUILTIN // button "PROG" on board
|
||||
|
||||
|
@ -16,7 +16,7 @@
|
||||
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
|
||||
#define CFG_sx1276_radio 1
|
||||
|
||||
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board
|
||||
#define HAS_DISPLAY 1 // OLED-Display on board
|
||||
#define HAS_LED LED_BUILTIN // white LED on board
|
||||
#define HAS_BUTTON KEY_BUILTIN // button "PROG" on board
|
||||
|
||||
|
@ -13,7 +13,7 @@
|
||||
// disable brownout detection (avoid unexpected reset on some boards)
|
||||
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
|
||||
|
||||
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board
|
||||
#define HAS_DISPLAY 1 // OLED-Display on board
|
||||
//#define DISPLAY_FLIP 1 // uncomment this for rotated display
|
||||
#define HAS_LED 22 // ESP32 GPIO12 (pin22) On Board LED
|
||||
#define LED_ACTIVE_LOW 1 // Onboard LED is active when pin is LOW
|
||||
@ -37,7 +37,7 @@
|
||||
// Pins for I2C interface of OLED Display
|
||||
#define MY_OLED_SDA (14)
|
||||
#define MY_OLED_SCL (12)
|
||||
#define MY_OLED_RST U8X8_PIN_NONE
|
||||
#define MY_OLED_RST NOT_A_PIN
|
||||
|
||||
// I2C config for Microchip 24AA02E64 DEVEUI unique address
|
||||
#define MCP_24AA02E64_I2C_ADDRESS 0x50 // I2C address for the 24AA02E64
|
||||
|
@ -13,7 +13,7 @@
|
||||
// disable brownout detection (avoid unexpected reset on some boards)
|
||||
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
|
||||
|
||||
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board
|
||||
#define HAS_DISPLAY 1 // OLED-Display on board
|
||||
//#define DISPLAY_FLIP 1 // uncomment this for rotated display
|
||||
#define HAS_LED NOT_A_PIN // Led os on same pin as Lora SS pin, to avoid problems, we don't use it
|
||||
#define LED_ACTIVE_LOW 1 // Onboard LED is active when pin is LOW
|
||||
@ -39,7 +39,7 @@
|
||||
// Pins for I2C interface of OLED Display
|
||||
#define MY_OLED_SDA (21)
|
||||
#define MY_OLED_SCL (22)
|
||||
#define MY_OLED_RST U8X8_PIN_NONE
|
||||
#define MY_OLED_RST NOT_A_PIN
|
||||
|
||||
// I2C config for Microchip 24AA02E64 DEVEUI unique address
|
||||
#define MCP_24AA02E64_I2C_ADDRESS 0x50 // I2C address for the 24AA02E64
|
||||
|
@ -41,10 +41,10 @@
|
||||
#define LORA_IO2 LMIC_UNUSED_PIN
|
||||
|
||||
// Pins for I2C interface of OLED Display
|
||||
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // U8X8_SSD1306_128X32_UNIVISION_SW_I2C //
|
||||
#define HAS_DISPLAY 1
|
||||
//#define DISPLAY_FLIP 1 // uncomment this for rotated display
|
||||
#define MY_OLED_SDA (23)
|
||||
#define MY_OLED_SCL (22)
|
||||
#define MY_OLED_RST U8X8_PIN_NONE
|
||||
#define MY_OLED_RST NOT_A_PIN
|
||||
|
||||
#endif
|
||||
|
@ -28,15 +28,15 @@
|
||||
|
||||
// enable only if device has these sensors, otherwise comment these lines
|
||||
// BME680 sensor on I2C bus
|
||||
#define HAS_BME 1 // Enable BME sensors in general
|
||||
#define HAS_BME680 SDA, SCL
|
||||
#define BME680_ADDR BME680_I2C_ADDR_PRIMARY // !! connect SDIO of BME680 to GND !!
|
||||
//#define HAS_BME 1 // Enable BME sensors in general
|
||||
//#define HAS_BME680 SDA, SCL
|
||||
//#define BME680_ADDR BME680_I2C_ADDR_PRIMARY // !! connect SDIO of BME680 to GND !!
|
||||
|
||||
// display (if connected)
|
||||
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
|
||||
#define HAS_DISPLAY 1
|
||||
#define MY_OLED_SDA SDA
|
||||
#define MY_OLED_SCL SCL
|
||||
#define MY_OLED_RST U8X8_PIN_NONE
|
||||
#define MY_OLED_RST NOT_A_PIN
|
||||
//#define DISPLAY_FLIP 1 // use if display is rotated
|
||||
|
||||
// user defined sensors (if connected)
|
||||
|
@ -20,10 +20,10 @@ User, long press -> send LORA message
|
||||
Reset -> reset device
|
||||
*/
|
||||
|
||||
//#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
|
||||
#define HAS_DISPLAY 1
|
||||
#define MY_OLED_SDA SDA
|
||||
#define MY_OLED_SCL SCL
|
||||
#define MY_OLED_RST U8X8_PIN_NONE
|
||||
#define MY_OLED_RST NOT_A_PIN
|
||||
//#define DISPLAY_FLIP 1 // use if display is rotated
|
||||
|
||||
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
|
||||
|
@ -10,7 +10,7 @@
|
||||
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
|
||||
#define CFG_sx1276_radio 1 // HPD13A LoRa SoC
|
||||
|
||||
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
|
||||
#define HAS_DISPLAY 1
|
||||
#define HAS_LED NOT_A_PIN // green on board LED is useless, is GPIO25, which switches power for Lora+Display
|
||||
|
||||
#define EXT_POWER_SW GPIO_NUM_25 // switches power for LoRa chip
|
||||
@ -23,7 +23,7 @@
|
||||
// Pins for I2C interface of OLED Display
|
||||
#define MY_OLED_SDA (21)
|
||||
#define MY_OLED_SCL (22)
|
||||
#define MY_OLED_RST U8X8_PIN_NONE
|
||||
#define MY_OLED_RST NOT_A_PIN
|
||||
|
||||
// Settings for on board DS3231 RTC chip
|
||||
#define HAS_RTC MY_OLED_SDA, MY_OLED_SCL // SDA, SCL
|
||||
|
@ -12,7 +12,7 @@
|
||||
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
|
||||
#define CFG_sx1276_radio 1
|
||||
|
||||
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board
|
||||
#define HAS_DISPLAY 1 // OLED-Display on board
|
||||
//#define DISPLAY_FLIP 1 // uncomment this for rotated display
|
||||
#define HAS_LED LED_BUILTIN
|
||||
#define LED_ACTIVE_LOW 1 // Onboard LED is active when pin is LOW
|
||||
|
@ -12,7 +12,7 @@
|
||||
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
|
||||
#define CFG_sx1276_radio 1 // HPD13A LoRa SoC
|
||||
|
||||
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
|
||||
#define HAS_DISPLAY 1
|
||||
//#define DISPLAY_FLIP 1 // uncomment this for rotated display
|
||||
#define HAS_LED NOT_A_PIN // on-board LED is wired to SCL (used by display) therefore totally useless
|
||||
|
||||
@ -22,7 +22,7 @@
|
||||
// Pins for I2C interface of OLED Display
|
||||
#define MY_OLED_SDA (21)
|
||||
#define MY_OLED_SCL (22)
|
||||
#define MY_OLED_RST U8X8_PIN_NONE
|
||||
#define MY_OLED_RST NOT_A_PIN
|
||||
|
||||
// Pins for LORA chip SPI interface come from board file, we need some
|
||||
// additional definitions for LMIC
|
||||
|
@ -20,7 +20,7 @@
|
||||
//#define HAS_BME 1 // Enable BME sensors in general
|
||||
//#define HAS_BME280 GPIO_NUM_21, GPIO_NUM_22 // SDA, SCL
|
||||
|
||||
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
|
||||
#define HAS_DISPLAY 1
|
||||
#define HAS_LED (25) // green on board LED
|
||||
#define BAT_MEASURE_ADC ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
|
||||
#define BAT_VOLTAGE_DIVIDER 2 // voltage divider 100k/100k on board
|
||||
@ -28,7 +28,7 @@
|
||||
// Pins for I2C interface of OLED Display
|
||||
#define MY_OLED_SDA (21)
|
||||
#define MY_OLED_SCL (22)
|
||||
#define MY_OLED_RST U8X8_PIN_NONE
|
||||
#define MY_OLED_RST NOT_A_PIN
|
||||
|
||||
// Pins for LORA chip SPI interface, reset line and interrupt lines
|
||||
#define LORA_SCK (5)
|
||||
|
@ -19,15 +19,15 @@
|
||||
#define HAS_LED NOT_A_PIN // no usable LED on board
|
||||
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
|
||||
|
||||
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
|
||||
//#define DISPLAY_FLIP 1 // rotated display
|
||||
#define HAS_DISPLAY 1
|
||||
#define DISPLAY_FLIP 1 // rotated display
|
||||
//#define BAT_MEASURE_ADC ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
|
||||
//#define BAT_VOLTAGE_DIVIDER 2 // voltage divider 100k/100k on board
|
||||
|
||||
// Pins for I2C interface of OLED Display
|
||||
#define MY_OLED_SDA (21)
|
||||
#define MY_OLED_SCL (22)
|
||||
#define MY_OLED_RST U8X8_PIN_NONE
|
||||
#define MY_OLED_RST NOT_A_PIN
|
||||
|
||||
// Pins for LORA chip SPI interface, reset line and interrupt lines
|
||||
#define LORA_SCK (5)
|
||||
|
@ -9,10 +9,10 @@
|
||||
|
||||
#define HAS_LED NOT_A_PIN // no LED
|
||||
|
||||
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
|
||||
#define HAS_DISPLAY 1
|
||||
#define MY_OLED_SDA (5)
|
||||
#define MY_OLED_SCL (4)
|
||||
#define MY_OLED_RST U8X8_PIN_NONE
|
||||
#define MY_OLED_RST NOT_A_PIN
|
||||
#define DISPLAY_FLIP 1 // use if display is rotated
|
||||
|
||||
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
|
||||
|
@ -15,9 +15,11 @@ int i2c_scan(void) {
|
||||
// block i2c bus access
|
||||
if (I2C_MUTEX_LOCK()) {
|
||||
|
||||
// Scan at 100KHz low speed
|
||||
Wire.setClock(100000);
|
||||
|
||||
for (addr = 8; addr <= 119; addr++) {
|
||||
|
||||
// scan i2c bus with no more to 100KHz
|
||||
Wire.beginTransmission(addr);
|
||||
Wire.write(addr);
|
||||
i2c_ret = Wire.endTransmission();
|
||||
@ -58,6 +60,9 @@ int i2c_scan(void) {
|
||||
|
||||
ESP_LOGI(TAG, "I2C scan done, %u devices found.", devices);
|
||||
|
||||
// Set back to 400KHz
|
||||
Wire.setClock(400000);
|
||||
|
||||
I2C_MUTEX_UNLOCK(); // release i2c bus access
|
||||
} else
|
||||
ESP_LOGE(TAG, "I2c bus busy - scan error");
|
||||
|
@ -94,7 +94,7 @@ void refreshTheMatrixDisplay(bool nextPage) {
|
||||
if (col < (LED_MATRIX_WIDTH - 1))
|
||||
col++;
|
||||
else
|
||||
ScrollLeft(displaybuf, LED_MATRIX_WIDTH, LED_MATRIX_HEIGHT);
|
||||
ScrollMatrixLeft(displaybuf, LED_MATRIX_WIDTH, LED_MATRIX_HEIGHT);
|
||||
|
||||
} else
|
||||
matrix.drawPoint(col, row, 0); // clear current dot
|
||||
@ -204,7 +204,7 @@ uint8_t GetCharWidth(char cChar) {
|
||||
return CharDescriptor.width;
|
||||
}
|
||||
|
||||
void ScrollLeft(uint8_t *buf, const uint16_t cols, const uint16_t rows) {
|
||||
void ScrollMatrixLeft(uint8_t *buf, const uint16_t cols, const uint16_t rows) {
|
||||
uint32_t i, k, idx;
|
||||
const uint32_t x = cols / 8;
|
||||
|
||||
|
@ -28,14 +28,14 @@
|
||||
// so consuming more power. You may sharpen (reduce) this value if you are
|
||||
// limited on battery.
|
||||
// ATTN: VALUES > 7 WILL CAUSE RECEPTION AND JOIN PROBLEMS WITH HIGH SF RATES
|
||||
//#define CLOCK_ERROR_PROCENTAGE 7
|
||||
//#define CLOCK_ERROR_PROCENTAGE 5
|
||||
|
||||
// Set this to 1 to enable some basic debug output (using printf) about
|
||||
// RF settings used during transmission and reception. Set to 2 to
|
||||
// enable more verbose output. Make sure that printf is actually
|
||||
// configured (e.g. on AVR it is not by default), otherwise using it can
|
||||
// cause crashing.
|
||||
#define LMIC_DEBUG_LEVEL 0
|
||||
//#define LMIC_DEBUG_LEVEL 1
|
||||
|
||||
// Enable this to allow using printf() to print to the given serial port
|
||||
// (or any other Print object). This can be easy for debugging. The
|
||||
|
1295
src/lorawan.cpp
1295
src/lorawan.cpp
File diff suppressed because it is too large
Load Diff
@ -30,7 +30,7 @@ void printKey(const char *name, const uint8_t *key, uint8_t len, bool lsb) {
|
||||
char keystring[len + 1] = "", keybyte[3];
|
||||
for (uint8_t i = 0; i < len; i++) {
|
||||
p = lsb ? key + len - i - 1 : key + i;
|
||||
sprintf(keybyte, "%02X", *p);
|
||||
snprintf(keybyte, 3, "%02X", *p);
|
||||
strncat(keystring, keybyte, 2);
|
||||
}
|
||||
ESP_LOGI(TAG, "%s: %s", name, keystring);
|
||||
|
20
src/main.cpp
20
src/main.cpp
@ -76,9 +76,9 @@ triggers pps 1 sec impulse
|
||||
// Basic Config
|
||||
#include "main.h"
|
||||
|
||||
configData_t cfg; // struct holds current device configuration
|
||||
char lmic_event_msg[16]; // display buffer for LMIC event message
|
||||
uint8_t volatile channel = 0; // channel rotation counter
|
||||
configData_t cfg; // struct holds current device configuration
|
||||
char lmic_event_msg[LMIC_EVENTMSG_LEN]; // display buffer for LMIC event message
|
||||
uint8_t volatile channel = 0; // channel rotation counter
|
||||
uint16_t volatile macs_total = 0, macs_wifi = 0, macs_ble = 0,
|
||||
batt_voltage = 0; // globals for display
|
||||
|
||||
@ -129,7 +129,7 @@ void setup() {
|
||||
esp_log_level_set("*", ESP_LOG_NONE);
|
||||
#endif
|
||||
|
||||
ESP_LOGI(TAG, "Starting %s v%s", PRODUCTNAME, PROGVERSION);
|
||||
ESP_LOGI(TAG, "Starting Software v%s", PROGVERSION);
|
||||
|
||||
// print chip information on startup if in verbose mode
|
||||
#if (VERBOSE)
|
||||
@ -172,9 +172,9 @@ void setup() {
|
||||
|
||||
// open i2c bus
|
||||
#ifdef HAS_DISPLAY
|
||||
Wire.begin(MY_OLED_SDA, MY_OLED_SCL, 100000);
|
||||
Wire.begin(MY_OLED_SDA, MY_OLED_SCL, 400000);
|
||||
#else
|
||||
Wire.begin(SDA, SCL, 100000);
|
||||
Wire.begin(SDA, SCL, 400000);
|
||||
#endif
|
||||
|
||||
// setup power on boards with power management logic
|
||||
@ -188,9 +188,6 @@ void setup() {
|
||||
strcat_P(features, " PMU");
|
||||
#endif
|
||||
|
||||
// scan i2c bus for devices
|
||||
i2c_scan();
|
||||
|
||||
#endif // verbose
|
||||
|
||||
// read (and initialize on first run) runtime settings from NVRAM
|
||||
@ -200,9 +197,12 @@ void setup() {
|
||||
#ifdef HAS_DISPLAY
|
||||
strcat_P(features, " OLED");
|
||||
DisplayIsOn = cfg.screenon;
|
||||
init_display(PRODUCTNAME, PROGVERSION); // note: blocking call
|
||||
init_display(!cfg.runmode); // note: blocking call
|
||||
#endif
|
||||
|
||||
// scan i2c bus for devices
|
||||
i2c_scan();
|
||||
|
||||
#ifdef BOARD_HAS_PSRAM
|
||||
assert(psramFound());
|
||||
ESP_LOGI(TAG, "PSRAM found and initialized");
|
||||
|
83
src/ota.cpp
83
src/ota.cpp
@ -48,25 +48,25 @@ void start_ota_update() {
|
||||
|
||||
switch_LED(LED_ON);
|
||||
|
||||
// init display
|
||||
#ifdef HAS_DISPLAY
|
||||
u8x8.begin();
|
||||
u8x8.setFont(u8x8_font_chroma48medium8_r);
|
||||
u8x8.clear();
|
||||
#ifdef DISPLAY_FLIP
|
||||
u8x8.setFlipMode(1);
|
||||
#ifndef DISPLAY_FLIP
|
||||
oledInit(OLED_128x64, ANGLE_0, false, -1, -1, 400000L);
|
||||
#else
|
||||
oledInit(OLED_128x64, ANGLE_FLIPY, false, -1, -1, 400000L);
|
||||
#endif
|
||||
u8x8.setInverseFont(1);
|
||||
u8x8.print("SOFTWARE UPDATE \n");
|
||||
u8x8.setInverseFont(0);
|
||||
u8x8.print("WiFi connect ..\n");
|
||||
u8x8.print("Has Update? ..\n");
|
||||
u8x8.print("Fetching ..\n");
|
||||
u8x8.print("Downloading ..\n");
|
||||
u8x8.print("Rebooting ..");
|
||||
oledFill(0, 1);
|
||||
dp_printf(0, 0, 0, 1, "SOFTWARE UPDATE");
|
||||
dp_printf(0, 1, 0, 0, "WiFi connect ..");
|
||||
dp_printf(0, 2, 0, 0, "Has Update? ..");
|
||||
dp_printf(0, 3, 0, 0, "Fetching ..");
|
||||
dp_printf(0, 4, 0, 0, "Downloading ..");
|
||||
dp_printf(0, 5, 0, 0, "Rebooting ..");
|
||||
oledDumpBuffer(NULL);
|
||||
#endif
|
||||
|
||||
ESP_LOGI(TAG, "Starting Wifi OTA update");
|
||||
display(1, "**", WIFI_SSID);
|
||||
ota_display(1, "**", WIFI_SSID);
|
||||
|
||||
WiFi.mode(WIFI_STA);
|
||||
WiFi.begin(WIFI_SSID, WIFI_PASS);
|
||||
@ -81,7 +81,7 @@ void start_ota_update() {
|
||||
if (WiFi.status() == WL_CONNECTED) {
|
||||
// we now have wifi connection and try to do an OTA over wifi update
|
||||
ESP_LOGI(TAG, "Connected to %s", WIFI_SSID);
|
||||
display(1, "OK", "WiFi connected");
|
||||
ota_display(1, "OK", "WiFi connected");
|
||||
// do a number of tries to update firmware limited by OTA_MAX_TRY
|
||||
uint8_t j = OTA_MAX_TRY;
|
||||
while ((j--) && (ret > 0)) {
|
||||
@ -97,13 +97,13 @@ void start_ota_update() {
|
||||
|
||||
// wifi did not connect
|
||||
ESP_LOGI(TAG, "Could not connect to %s", WIFI_SSID);
|
||||
display(1, " E", "no WiFi connect");
|
||||
ota_display(1, " E", "no WiFi connect");
|
||||
delay(5000);
|
||||
|
||||
end:
|
||||
switch_LED(LED_OFF);
|
||||
ESP_LOGI(TAG, "Rebooting to %s firmware", (ret == 0) ? "new" : "current");
|
||||
display(5, "**", ""); // mark line rebooting
|
||||
ota_display(5, "**", ""); // mark line rebooting
|
||||
delay(5000);
|
||||
ESP.restart();
|
||||
|
||||
@ -119,7 +119,7 @@ int do_ota_update() {
|
||||
|
||||
// Fetch the latest firmware version
|
||||
ESP_LOGI(TAG, "Checking latest firmware version on server");
|
||||
display(2, "**", "checking version");
|
||||
ota_display(2, "**", "checking version");
|
||||
|
||||
if (WiFi.status() != WL_CONNECTED)
|
||||
return 1;
|
||||
@ -128,23 +128,23 @@ int do_ota_update() {
|
||||
|
||||
if (latest.length() == 0) {
|
||||
ESP_LOGI(TAG, "Could not fetch info on latest firmware");
|
||||
display(2, " E", "file not found");
|
||||
ota_display(2, " E", "file not found");
|
||||
return -1;
|
||||
} else if (version_compare(latest, cfg.version) <= 0) {
|
||||
ESP_LOGI(TAG, "Current firmware is up to date");
|
||||
display(2, "NO", "no update found");
|
||||
ota_display(2, "NO", "no update found");
|
||||
return -1;
|
||||
}
|
||||
ESP_LOGI(TAG, "New firmware version v%s available", latest.c_str());
|
||||
display(2, "OK", latest.c_str());
|
||||
ota_display(2, "OK", latest.c_str());
|
||||
|
||||
display(3, "**", "");
|
||||
ota_display(3, "**", "");
|
||||
if (WiFi.status() != WL_CONNECTED)
|
||||
return 1;
|
||||
String firmwarePath = bintray.getBinaryPath(latest);
|
||||
if (!firmwarePath.endsWith(".bin")) {
|
||||
ESP_LOGI(TAG, "Unsupported binary format");
|
||||
display(3, " E", "file type error");
|
||||
ota_display(3, " E", "file type error");
|
||||
return -1;
|
||||
}
|
||||
|
||||
@ -158,7 +158,7 @@ int do_ota_update() {
|
||||
|
||||
if (!client.connect(currentHost.c_str(), port)) {
|
||||
ESP_LOGI(TAG, "Cannot connect to %s", currentHost.c_str());
|
||||
display(3, " E", "connection lost");
|
||||
ota_display(3, " E", "connection lost");
|
||||
goto abort;
|
||||
}
|
||||
|
||||
@ -169,7 +169,7 @@ int do_ota_update() {
|
||||
if (!client.connect(currentHost.c_str(), port)) {
|
||||
ESP_LOGI(TAG, "Redirect detected, but cannot connect to %s",
|
||||
currentHost.c_str());
|
||||
display(3, " E", "server error");
|
||||
ota_display(3, " E", "server error");
|
||||
goto abort;
|
||||
}
|
||||
}
|
||||
@ -185,7 +185,7 @@ int do_ota_update() {
|
||||
while (client.available() == 0) {
|
||||
if ((millis() - timeout) > (RESPONSE_TIMEOUT_MS)) {
|
||||
ESP_LOGI(TAG, "Client timeout");
|
||||
display(3, " E", "client timeout");
|
||||
ota_display(3, " E", "client timeout");
|
||||
goto abort;
|
||||
}
|
||||
}
|
||||
@ -243,12 +243,12 @@ int do_ota_update() {
|
||||
} // while (client.available())
|
||||
} // while (redirect)
|
||||
|
||||
display(3, "OK", ""); // line download
|
||||
ota_display(3, "OK", ""); // line download
|
||||
|
||||
// check whether we have everything for OTA update
|
||||
if (!(contentLength && isValidContentType)) {
|
||||
ESP_LOGI(TAG, "Invalid OTA server response");
|
||||
display(4, " E", "response error");
|
||||
ota_display(4, " E", "response error");
|
||||
goto retry;
|
||||
}
|
||||
|
||||
@ -262,7 +262,7 @@ int do_ota_update() {
|
||||
if (!Update.begin(contentLength)) {
|
||||
#endif
|
||||
ESP_LOGI(TAG, "Not enough space to start OTA update");
|
||||
display(4, " E", "disk full");
|
||||
ota_display(4, " E", "disk full");
|
||||
goto abort;
|
||||
}
|
||||
|
||||
@ -271,13 +271,13 @@ int do_ota_update() {
|
||||
Update.onProgress(&show_progress);
|
||||
#endif
|
||||
|
||||
display(4, "**", "writing...");
|
||||
ota_display(4, "**", "writing...");
|
||||
written = Update.writeStream(client); // this is a blocking call
|
||||
|
||||
if (written == contentLength) {
|
||||
ESP_LOGI(TAG, "Written %u bytes successfully", written);
|
||||
snprintf(buf, 17, "%ukB Done!", (uint16_t)(written / 1024));
|
||||
display(4, "OK", buf);
|
||||
ota_display(4, "OK", buf);
|
||||
} else {
|
||||
ESP_LOGI(TAG, "Written only %u of %u bytes, OTA update attempt cancelled",
|
||||
written, contentLength);
|
||||
@ -288,7 +288,7 @@ int do_ota_update() {
|
||||
} else {
|
||||
ESP_LOGI(TAG, "An error occurred. Error#: %d", Update.getError());
|
||||
snprintf(buf, 17, "Error#: %d", Update.getError());
|
||||
display(4, " E", buf);
|
||||
ota_display(4, " E", buf);
|
||||
goto retry;
|
||||
}
|
||||
|
||||
@ -307,27 +307,26 @@ retry:
|
||||
|
||||
} // do_ota_update
|
||||
|
||||
void display(const uint8_t row, const std::string status,
|
||||
const std::string msg) {
|
||||
void ota_display(const uint8_t row, const std::string status,
|
||||
const std::string msg) {
|
||||
#ifdef HAS_DISPLAY
|
||||
u8x8.setCursor(14, row);
|
||||
u8x8.print((status.substr(0, 2)).c_str());
|
||||
dp_printf(112, row, 0, 0, status.substr(0, 2).c_str());
|
||||
if (!msg.empty()) {
|
||||
u8x8.clearLine(7);
|
||||
u8x8.setCursor(0, 7);
|
||||
u8x8.print(msg.substr(0, 16).c_str());
|
||||
dp_printf(0, 7, 0, 0, " ");
|
||||
dp_printf(0, 7, 0, 0, msg.substr(0, 16).c_str());
|
||||
}
|
||||
oledDumpBuffer(NULL);
|
||||
#endif
|
||||
}
|
||||
|
||||
#ifdef HAS_DISPLAY
|
||||
// callback function to show download progress while streaming data
|
||||
void show_progress(unsigned long current, unsigned long size) {
|
||||
#ifdef HAS_DISPLAY
|
||||
char buf[17];
|
||||
snprintf(buf, 17, "%-9lu (%3lu%%)", current, current * 100 / size);
|
||||
display(4, "**", buf);
|
||||
}
|
||||
ota_display(4, "**", buf);
|
||||
#endif
|
||||
}
|
||||
|
||||
// helper function to convert strings into lower case
|
||||
bool comp(char s1, char s2) { return tolower(s1) < tolower(s2); }
|
||||
|
@ -6,14 +6,13 @@
|
||||
//
|
||||
// Note: After editing, before "build", use "clean" button in PlatformIO!
|
||||
|
||||
#define PRODUCTNAME "PAXCNT"
|
||||
|
||||
// Verbose enables serial output
|
||||
#define VERBOSE 1 // set to 0 to silence the device, for mute use build option
|
||||
|
||||
// Payload send cycle and encoding
|
||||
#define SENDCYCLE 30 // payload send cycle [seconds/2], 0 .. 255
|
||||
#define PAYLOAD_ENCODER 2 // payload encoder: 1=Plain, 2=Packed, 3=Cayenne LPP dynamic, 4=Cayenne LPP packed
|
||||
#define COUNTERMODE 0 // 0=cyclic, 1=cumulative, 2=cyclic confirmed
|
||||
|
||||
// Set this to include BLE counting and vendor filter functions, or to switch off WIFI counting
|
||||
#define VENDORFILTER 1 // set to 0 if you want to count things, not people
|
||||
@ -30,7 +29,7 @@
|
||||
* |< Scan Window > |< Scan Window > | ... |< Scan Window > |
|
||||
* |< Scan Interval >|< Scan Interval >| ... |< Scan Interval >|
|
||||
* |< Scan duration >|
|
||||
*
|
||||
*
|
||||
* Scan duration sets how long scanning should be going on, before starting a new scan cycle. 0 means infinite (default).
|
||||
* Scan window sets how much of the interval should be occupied by scanning. Should be >= BLESCANINTERVAL.
|
||||
* Scan interval is how long scanning should be done on each channel. BLE uses 3 channels for advertising.
|
||||
@ -49,13 +48,14 @@
|
||||
#define RETRANSMIT_RCMD 5 // [seconds] wait time before retransmitting rcommand results
|
||||
#define PAYLOAD_BUFFER_SIZE 51 // maximum size of payload block per transmit
|
||||
#define LORADRDEFAULT 5 // 0 .. 15, LoRaWAN datarate, according to regional LoRaWAN specs [default = 5]
|
||||
#define LORATXPOWDEFAULT 7 // 0 .. 255, LoRaWAN TX power in dBm [default = 14]
|
||||
#define LORATXPOWDEFAULT 14 // 0 .. 255, LoRaWAN TX power in dBm [default = 14]
|
||||
#define MAXLORARETRY 500 // maximum count of TX retries if LoRa busy
|
||||
#define SEND_QUEUE_SIZE 10 // maximum number of messages in payload send queue [1 = no queue]
|
||||
|
||||
// Hardware settings
|
||||
#define RGBLUMINOSITY 30 // RGB LED luminosity [default = 30%]
|
||||
#define DISPLAYREFRESH_MS 40 // OLED refresh cycle in ms [default = 40] -> 1000/40 = 25 frames per second
|
||||
#define DISPLAYCONTRAST 80 // 0 .. 255, OLED display contrast [default = 80]
|
||||
#define HOMECYCLE 30 // house keeping cycle in seconds [default = 30 secs]
|
||||
|
||||
// Settings for BME680 environmental sensor
|
||||
@ -97,9 +97,8 @@
|
||||
#define BEACONPORT 6 // beacon alarms
|
||||
#define BMEPORT 7 // BME680 sensor
|
||||
#define BATTPORT 8 // battery voltage
|
||||
#define TIMEPORT 9 // time query
|
||||
#define TIMEANSWERPORT_MIN 0xA0 // time answer, start of port range
|
||||
#define TIMEANSWERPORT_MAX 0xDF // time answer, end of port range
|
||||
#define TIMEPORT 9 // time query and response
|
||||
#define TIMEDIFFPORT 13 // time adjust diff
|
||||
#define SENSOR1PORT 10 // user sensor #1
|
||||
#define SENSOR2PORT 11 // user sensor #2
|
||||
#define SENSOR3PORT 12 // user sensor #3
|
||||
|
222
src/power.cpp
222
src/power.cpp
@ -11,48 +11,41 @@ AXP20X_Class pmu;
|
||||
|
||||
void power_event_IRQ(void) {
|
||||
|
||||
if (!I2C_MUTEX_LOCK())
|
||||
ESP_LOGW(TAG, "[%0.3f] i2c mutex lock failed", millis() / 1000.0);
|
||||
else {
|
||||
pmu.readIRQ();
|
||||
|
||||
pmu.readIRQ();
|
||||
// put your power event handler code here
|
||||
if (pmu.isVbusOverVoltageIRQ())
|
||||
ESP_LOGI(TAG, "USB voltage %.2fV too high.", pmu.getVbusVoltage() / 1000);
|
||||
if (pmu.isVbusPlugInIRQ())
|
||||
ESP_LOGI(TAG, "USB plugged, %.2fV @ %.0mA", pmu.getVbusVoltage() / 1000,
|
||||
pmu.getVbusCurrent());
|
||||
if (pmu.isVbusRemoveIRQ())
|
||||
ESP_LOGI(TAG, "USB unplugged.");
|
||||
|
||||
if (pmu.isVbusOverVoltageIRQ())
|
||||
ESP_LOGI(TAG, "USB voltage %.2fV too high.", pmu.getVbusVoltage() / 1000);
|
||||
if (pmu.isVbusPlugInIRQ())
|
||||
ESP_LOGI(TAG, "USB plugged, %.2fV @ %.0mA", pmu.getVbusVoltage() / 1000,
|
||||
pmu.getVbusCurrent());
|
||||
if (pmu.isVbusRemoveIRQ())
|
||||
ESP_LOGI(TAG, "USB unplugged.");
|
||||
if (pmu.isBattPlugInIRQ())
|
||||
ESP_LOGI(TAG, "Battery is connected.");
|
||||
if (pmu.isBattRemoveIRQ())
|
||||
ESP_LOGI(TAG, "Battery was removed.");
|
||||
if (pmu.isChargingIRQ())
|
||||
ESP_LOGI(TAG, "Battery charging.");
|
||||
if (pmu.isChargingDoneIRQ())
|
||||
ESP_LOGI(TAG, "Battery charging done.");
|
||||
if (pmu.isBattTempLowIRQ())
|
||||
ESP_LOGI(TAG, "Battery high temperature.");
|
||||
if (pmu.isBattTempHighIRQ())
|
||||
ESP_LOGI(TAG, "Battery low temperature.");
|
||||
|
||||
if (pmu.isBattPlugInIRQ())
|
||||
ESP_LOGI(TAG, "Battery is connected.");
|
||||
if (pmu.isBattRemoveIRQ())
|
||||
ESP_LOGI(TAG, "Battery was removed.");
|
||||
if (pmu.isChargingIRQ())
|
||||
ESP_LOGI(TAG, "Battery charging.");
|
||||
if (pmu.isChargingDoneIRQ())
|
||||
ESP_LOGI(TAG, "Battery charging done.");
|
||||
if (pmu.isBattTempLowIRQ())
|
||||
ESP_LOGI(TAG, "Battery high temperature.");
|
||||
if (pmu.isBattTempHighIRQ())
|
||||
ESP_LOGI(TAG, "Battery low temperature.");
|
||||
// display on/off
|
||||
// if (pmu.isPEKShortPressIRQ()) {
|
||||
// cfg.screenon = !cfg.screenon;
|
||||
//}
|
||||
|
||||
// display on/off
|
||||
if (pmu.isPEKShortPressIRQ()) {
|
||||
cfg.screenon = !cfg.screenon;
|
||||
}
|
||||
// shutdown power
|
||||
if (pmu.isPEKLongtPressIRQ()) {
|
||||
AXP192_power(false); // switch off Lora, GPS, display
|
||||
pmu.shutdown(); // switch off device
|
||||
}
|
||||
|
||||
// shutdown power
|
||||
if (pmu.isPEKLongtPressIRQ()) {
|
||||
AXP192_power(false); // switch off Lora, GPS, display
|
||||
pmu.shutdown();
|
||||
}
|
||||
|
||||
pmu.clearIRQ();
|
||||
I2C_MUTEX_UNLOCK();
|
||||
} // mutex
|
||||
pmu.clearIRQ();
|
||||
|
||||
// refresh stored voltage value
|
||||
read_voltage();
|
||||
@ -75,70 +68,106 @@ void AXP192_power(bool on) {
|
||||
|
||||
void AXP192_showstatus(void) {
|
||||
|
||||
if (!I2C_MUTEX_LOCK())
|
||||
ESP_LOGW(TAG, "[%0.3f] i2c mutex lock failed", millis() / 1000.0);
|
||||
else {
|
||||
|
||||
if (pmu.isBatteryConnect())
|
||||
if (pmu.isChargeing())
|
||||
ESP_LOGI(TAG, "Battery charging, %.2fV @ %.0fmAh",
|
||||
pmu.getBattVoltage() / 1000, pmu.getBattChargeCurrent());
|
||||
else
|
||||
ESP_LOGI(TAG, "Battery not charging");
|
||||
if (pmu.isBatteryConnect())
|
||||
if (pmu.isChargeing())
|
||||
ESP_LOGI(TAG, "Battery charging, %.2fV @ %.0fmAh",
|
||||
pmu.getBattVoltage() / 1000, pmu.getBattChargeCurrent());
|
||||
else
|
||||
ESP_LOGI(TAG, "No Battery");
|
||||
ESP_LOGI(TAG, "Battery not charging");
|
||||
else
|
||||
ESP_LOGI(TAG, "No Battery");
|
||||
|
||||
if (pmu.isVBUSPlug())
|
||||
ESP_LOGI(TAG, "USB powered, %.0fmW",
|
||||
pmu.getVbusVoltage() / 1000 * pmu.getVbusCurrent());
|
||||
else
|
||||
ESP_LOGI(TAG, "USB not present");
|
||||
|
||||
I2C_MUTEX_UNLOCK();
|
||||
} // mutex
|
||||
if (pmu.isVBUSPlug())
|
||||
ESP_LOGI(TAG, "USB powered, %.0fmW",
|
||||
pmu.getVbusVoltage() / 1000 * pmu.getVbusCurrent());
|
||||
else
|
||||
ESP_LOGI(TAG, "USB not present");
|
||||
}
|
||||
|
||||
void AXP192_init(void) {
|
||||
|
||||
// block i2c bus access
|
||||
if (I2C_MUTEX_LOCK()) {
|
||||
if (pmu.begin(i2c_readBytes, i2c_writeBytes, AXP192_PRIMARY_ADDRESS) ==
|
||||
AXP_FAIL)
|
||||
ESP_LOGI(TAG, "AXP192 PMU initialization failed");
|
||||
else {
|
||||
|
||||
if (pmu.begin(Wire, AXP192_PRIMARY_ADDRESS))
|
||||
ESP_LOGI(TAG, "AXP192 PMU initialization failed");
|
||||
else {
|
||||
// configure AXP192
|
||||
pmu.setDCDC1Voltage(3300); // for external OLED display
|
||||
pmu.setTimeOutShutdown(false); // no automatic shutdown
|
||||
pmu.setTSmode(AXP_TS_PIN_MODE_DISABLE); // TS pin mode off to save power
|
||||
|
||||
// configure AXP192
|
||||
pmu.setDCDC1Voltage(3300); // for external OLED display
|
||||
pmu.setTimeOutShutdown(false); // no automatic shutdown
|
||||
pmu.setTSmode(AXP_TS_PIN_MODE_DISABLE); // TS pin mode off to save power
|
||||
// switch ADCs on
|
||||
pmu.adc1Enable(AXP202_BATT_VOL_ADC1, true);
|
||||
pmu.adc1Enable(AXP202_BATT_CUR_ADC1, true);
|
||||
pmu.adc1Enable(AXP202_VBUS_VOL_ADC1, true);
|
||||
pmu.adc1Enable(AXP202_VBUS_CUR_ADC1, true);
|
||||
|
||||
// switch ADCs on
|
||||
pmu.adc1Enable(AXP202_BATT_VOL_ADC1, true);
|
||||
pmu.adc1Enable(AXP202_BATT_CUR_ADC1, true);
|
||||
pmu.adc1Enable(AXP202_VBUS_VOL_ADC1, true);
|
||||
pmu.adc1Enable(AXP202_VBUS_CUR_ADC1, true);
|
||||
// switch power rails on
|
||||
AXP192_power(true);
|
||||
|
||||
// switch power rails on
|
||||
AXP192_power(true);
|
||||
|
||||
// I2C access of AXP202X library currently is not mutexable
|
||||
// so we better should disable AXP interrupts... ?
|
||||
#ifdef PMU_INT
|
||||
pinMode(PMU_INT, INPUT_PULLUP);
|
||||
attachInterrupt(digitalPinToInterrupt(PMU_INT), PMUIRQ, FALLING);
|
||||
pmu.enableIRQ(AXP202_VBUS_REMOVED_IRQ | AXP202_VBUS_CONNECT_IRQ |
|
||||
AXP202_BATT_REMOVED_IRQ | AXP202_BATT_CONNECT_IRQ |
|
||||
AXP202_CHARGING_FINISHED_IRQ,
|
||||
1);
|
||||
pmu.clearIRQ();
|
||||
pinMode(PMU_INT, INPUT_PULLUP);
|
||||
attachInterrupt(digitalPinToInterrupt(PMU_INT), PMUIRQ, FALLING);
|
||||
pmu.enableIRQ(AXP202_VBUS_REMOVED_IRQ | AXP202_VBUS_CONNECT_IRQ |
|
||||
AXP202_BATT_REMOVED_IRQ | AXP202_BATT_CONNECT_IRQ |
|
||||
AXP202_CHARGING_FINISHED_IRQ,
|
||||
1);
|
||||
pmu.clearIRQ();
|
||||
#endif // PMU_INT
|
||||
|
||||
ESP_LOGI(TAG, "AXP192 PMU initialized");
|
||||
}
|
||||
I2C_MUTEX_UNLOCK(); // release i2c bus access
|
||||
} else
|
||||
ESP_LOGE(TAG, "I2c bus busy - PMU initialization error");
|
||||
ESP_LOGI(TAG, "AXP192 PMU initialized");
|
||||
}
|
||||
}
|
||||
|
||||
// helper functions for mutexing i2c access
|
||||
uint8_t i2c_readBytes(uint8_t addr, uint8_t reg, uint8_t *data, uint8_t len) {
|
||||
if (I2C_MUTEX_LOCK()) {
|
||||
|
||||
uint8_t ret = 0;
|
||||
Wire.beginTransmission(addr);
|
||||
Wire.write(reg);
|
||||
Wire.endTransmission(false);
|
||||
uint8_t cnt = Wire.requestFrom(addr, (uint8_t)len, (uint8_t)1);
|
||||
if (!cnt)
|
||||
ret = 0xFF;
|
||||
uint16_t index = 0;
|
||||
while (Wire.available()) {
|
||||
if (index > len) {
|
||||
ret = 0xFF;
|
||||
goto finish;
|
||||
}
|
||||
data[index++] = Wire.read();
|
||||
}
|
||||
|
||||
finish:
|
||||
I2C_MUTEX_UNLOCK(); // release i2c bus access
|
||||
return ret;
|
||||
} else {
|
||||
ESP_LOGW(TAG, "[%0.3f] i2c mutex lock failed", millis() / 1000.0);
|
||||
return 0xFF;
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t i2c_writeBytes(uint8_t addr, uint8_t reg, uint8_t *data, uint8_t len) {
|
||||
if (I2C_MUTEX_LOCK()) {
|
||||
|
||||
uint8_t ret = 0;
|
||||
Wire.beginTransmission(addr);
|
||||
Wire.write(reg);
|
||||
for (uint16_t i = 0; i < len; i++) {
|
||||
Wire.write(data[i]);
|
||||
}
|
||||
ret = Wire.endTransmission();
|
||||
|
||||
I2C_MUTEX_UNLOCK(); // release i2c bus access
|
||||
// return ret ? 0xFF : ret;
|
||||
return ret ? ret : 0xFF;
|
||||
} else {
|
||||
ESP_LOGW(TAG, "[%0.3f] i2c mutex lock failed", millis() / 1000.0);
|
||||
return 0xFF;
|
||||
}
|
||||
}
|
||||
|
||||
#endif // HAS_PMU
|
||||
|
||||
#ifdef BAT_MEASURE_ADC
|
||||
@ -196,30 +225,27 @@ uint16_t read_voltage() {
|
||||
uint16_t voltage = 0;
|
||||
|
||||
#ifdef HAS_PMU
|
||||
if (!I2C_MUTEX_LOCK())
|
||||
ESP_LOGW(TAG, "[%0.3f] i2c mutex lock failed", millis() / 1000.0);
|
||||
else {
|
||||
voltage = pmu.isVBUSPlug() ? 0xffff : pmu.getBattVoltage();
|
||||
I2C_MUTEX_UNLOCK();
|
||||
}
|
||||
voltage = pmu.isVBUSPlug() ? 0xffff : pmu.getBattVoltage();
|
||||
#else
|
||||
|
||||
#ifdef BAT_MEASURE_ADC
|
||||
// multisample ADC
|
||||
uint32_t adc_reading = 0;
|
||||
#ifndef BAT_MEASURE_ADC_UNIT // ADC1
|
||||
for (int i = 0; i < NO_OF_SAMPLES; i++) {
|
||||
adc_reading += adc1_get_raw(adc_channel);
|
||||
}
|
||||
#else // ADC2
|
||||
int adc_buf = 0;
|
||||
for (int i = 0; i < NO_OF_SAMPLES; i++) {
|
||||
#ifndef BAT_MEASURE_ADC_UNIT // ADC1
|
||||
adc_reading += adc1_get_raw(adc_channel);
|
||||
#else // ADC2
|
||||
ESP_ERROR_CHECK(adc2_get_raw(adc_channel, ADC_WIDTH_BIT_12, &adc_buf));
|
||||
adc_reading += adc_buf;
|
||||
#endif
|
||||
}
|
||||
#endif // BAT_MEASURE_ADC_UNIT
|
||||
adc_reading /= NO_OF_SAMPLES;
|
||||
// Convert ADC reading to voltage in mV
|
||||
voltage = esp_adc_cal_raw_to_voltage(adc_reading, adc_characs);
|
||||
#endif // BAT_MEASURE_ADC
|
||||
#endif // BAT_MEASURE_ADC
|
||||
|
||||
#ifdef BAT_VOLTAGE_DIVIDER
|
||||
voltage *= BAT_VOLTAGE_DIVIDER;
|
||||
|
@ -191,7 +191,7 @@ void set_loradr(uint8_t val[]) {
|
||||
if (validDR(val[0])) {
|
||||
cfg.loradr = val[0];
|
||||
ESP_LOGI(TAG, "Remote command: set LoRa Datarate to %d", cfg.loradr);
|
||||
LMIC_setDrTxpow(assertDR(cfg.loradr), cfg.txpower);
|
||||
LMIC_setDrTxpow(assertDR(cfg.loradr), KEEP_TXPOW);
|
||||
ESP_LOGI(TAG, "Radio parameters now %s / %s / %s",
|
||||
getSfName(updr2rps(LMIC.datarate)),
|
||||
getBwName(updr2rps(LMIC.datarate)),
|
||||
|
@ -75,6 +75,10 @@ void sendData() {
|
||||
get_salt(); // get new salt for salting hashes
|
||||
ESP_LOGI(TAG, "Counter cleared");
|
||||
}
|
||||
#ifdef HAS_DISPLAY
|
||||
else
|
||||
oledPlotCurve(macs.size(), true);
|
||||
#endif
|
||||
break;
|
||||
#endif
|
||||
|
||||
|
@ -25,7 +25,7 @@ typedef std::chrono::duration<long long int, std::ratio<1, 1000>>
|
||||
|
||||
TaskHandle_t timeSyncReqTask = NULL;
|
||||
|
||||
static uint8_t time_sync_seqNo = random(TIMEANSWERPORT_MIN, TIMEANSWERPORT_MAX);
|
||||
static uint8_t time_sync_seqNo = (uint8_t)random(TIMEREQUEST_MAX_SEQNO);
|
||||
static bool timeSyncPending = false;
|
||||
static myClock_timepoint time_sync_tx[TIME_SYNC_SAMPLES];
|
||||
static myClock_timepoint time_sync_rx[TIME_SYNC_SAMPLES];
|
||||
@ -93,9 +93,10 @@ void process_timesync_req(void *taskparameter) {
|
||||
time_point_cast<milliseconds>(time_sync_tx[k]);
|
||||
|
||||
// wrap around seqNo, keeping it in time port range
|
||||
time_sync_seqNo = (time_sync_seqNo < TIMEANSWERPORT_MAX)
|
||||
? time_sync_seqNo + 1
|
||||
: TIMEANSWERPORT_MIN;
|
||||
time_sync_seqNo++;
|
||||
if (time_sync_seqNo > TIMEREQUEST_MAX_SEQNO) {
|
||||
time_sync_seqNo = 0;
|
||||
}
|
||||
|
||||
if (i < TIME_SYNC_SAMPLES - 1) {
|
||||
// wait until next cycle
|
||||
@ -153,16 +154,30 @@ void store_time_sync_req(uint32_t timestamp) {
|
||||
timestamp % 1000);
|
||||
}
|
||||
|
||||
// process timeserver timestamp answer, called from lorawan.cpp
|
||||
int recv_timesync_ans(const uint8_t seq_no, const uint8_t buf[], const uint8_t buf_len) {
|
||||
// process timeserver timestamp answer, called by myRxCallback() in lorawan.cpp
|
||||
int recv_timesync_ans(const uint8_t buf[], const uint8_t buf_len) {
|
||||
|
||||
/*
|
||||
parse 7 byte timesync_answer:
|
||||
|
||||
byte meaning
|
||||
1 sequence number (taken from node's time_sync_req)
|
||||
2 timezone in 15 minutes steps
|
||||
3..6 current second (from epoch time 1970)
|
||||
7 1/250ths fractions of current second
|
||||
*/
|
||||
|
||||
// if no timesync handshake is pending then exit
|
||||
if (!timeSyncPending)
|
||||
return 0; // failure
|
||||
|
||||
// extract 1 byte timerequest sequence number from buffer
|
||||
uint8_t seq_no = buf[0];
|
||||
buf++;
|
||||
|
||||
// if no time is available or spurious buffer then exit
|
||||
if (buf_len != TIME_SYNC_FRAME_LENGTH) {
|
||||
if (buf[0] == 0xff)
|
||||
if (seq_no == 0xff)
|
||||
ESP_LOGI(TAG, "[%0.3f] Timeserver error: no confident time available",
|
||||
millis() / 1000.0);
|
||||
else
|
||||
@ -175,19 +190,26 @@ int recv_timesync_ans(const uint8_t seq_no, const uint8_t buf[], const uint8_t b
|
||||
|
||||
uint8_t k = seq_no % TIME_SYNC_SAMPLES;
|
||||
|
||||
// the 5th byte contains the fractional seconds in 2^-8 second steps
|
||||
// (= 1/250th sec), we convert this to ms
|
||||
uint16_t timestamp_msec = 4 * buf[4];
|
||||
// pointers to 4 bytes containing UTC seconds since unix epoch, msb
|
||||
uint32_t timestamp_sec, *timestamp_ptr;
|
||||
|
||||
// convert buffer to uint32_t, octet order is big endian
|
||||
// extract 1 byte timezone from buffer (one step being 15min * 60s = 900s)
|
||||
// uint32_t timezone_sec = buf[0] * 900; // for future use
|
||||
buf++;
|
||||
|
||||
// extract 4 bytes timestamp from buffer
|
||||
// and convert it to uint32_t, octet order is big endian
|
||||
timestamp_ptr = (uint32_t *)buf;
|
||||
// swap byte order from msb to lsb, note: this is platform dependent
|
||||
timestamp_sec = __builtin_bswap32(*timestamp_ptr);
|
||||
buf += 4;
|
||||
// extract 1 byte fractional seconds in 2^-8 second steps
|
||||
// (= 1/250th sec), we convert this to ms
|
||||
uint16_t timestamp_msec = 4 * buf[0];
|
||||
|
||||
// construct the timepoint when message was seen on gateway
|
||||
time_sync_rx[k] += seconds(timestamp_sec) + milliseconds(timestamp_msec);
|
||||
time_sync_rx[k] +=
|
||||
seconds(timestamp_sec) + milliseconds(timestamp_msec);
|
||||
|
||||
// we guess timepoint is recent if it newer than code compile date
|
||||
if (timeIsValid(myClock::to_time_t(time_sync_rx[k]))) {
|
||||
@ -218,4 +240,4 @@ void timesync_init() {
|
||||
1); // CPU core
|
||||
}
|
||||
|
||||
#endif
|
||||
#endif
|
||||
|
Loading…
Reference in New Issue
Block a user