bugfix ttgobeam.h & update readme.md

This commit is contained in:
Klaus K Wilting 2018-06-12 09:28:27 +02:00
parent 945ce1694d
commit 81dd510eaa
3 changed files with 26 additions and 25 deletions

View File

@ -264,41 +264,42 @@ Note: all settings are stored in NVRAM and will be reloaded when device starts.
0x80 get device configuration
device answers with it's current configuration. The configuration is a C structure declared in file [globals.h](src/globals.h#L27-L44) with the following definition:
device answers with it's current configuration. The configuration is a C structure declared in file [globals.h](src/globals.h#L32-L50) with the following definition:
byte 1: Lora SF (7..12)
byte 2: Lora TXpower (2..15)
byte 3: Lora ADR (1=on, 0=off)
byte 4: Screensaver status (1=on, 0=off)
byte 5: Display status (1=on, 0=off)
byte 6: Counter mode (0=cyclic unconfirmed, 1=cumulative, 2=cyclic confirmed)
bytes 7-8: RSSI limiter threshold value (negative)
byte 9: Lora Payload send cycle in seconds/2 (0..255)
byte 10: Wifi channel switch interval in seconds/100 (0..255)
byte 11: Bluetooth channel switch interval in seconds/100 (0..255)
byte 12: Bluetooth scanner status (1=on, 0=0ff)
byte 13: Wifi antenna switch (0=internal, 1=external)
byte 14: Vendorfilter mode (0=disabled, 1=enabled)
byte 15: RGB LED luminosity (0..100 %)
bytes 16-26: Software version (ASCII format, terminating with zero)
byte 1: Lora SF (7..12) [default 9]
byte 2: Lora TXpower (2..15) [default 15]
byte 3: Lora ADR (1=on, 0=off) [default 1]
byte 4: Screensaver status (1=on, 0=off) [default 0]
byte 5: Display status (1=on, 0=off) [default 0]
byte 6: Counter mode (0=cyclic unconfirmed, 1=cumulative, 2=cyclic confirmed) [default 0]
bytes 7-8: RSSI limiter threshold value (negative) [default 0]
byte 9: Lora Payload send cycle in seconds/2 (0..255) [default 120]
byte 10: Wifi channel switch interval in seconds/100 (0..255) [default 50]
byte 11: Bluetooth channel switch interval in seconds/100 (0..255) [efault 10]
byte 12: Bluetooth scanner status (1=on, 0=0ff) [default 1]
byte 13: Wifi antenna switch (0=internal, 1=external) [default 0]
byte 14: Vendorfilter mode (0=disabled, 1=enabled) [default 0]
byte 15: RGB LED luminosity (0..100 %) [default 30]
byte 16: GPS send data mode (1=on, 0=ff) [default 1]
bytes 17-27: Software version (ASCII format, terminating with zero)
0x81 get device uptime
bytes 1-8: uptime in seconds (little endian format)
bytes 1-8: Uptime in seconds (little endian format)
0x82 get device cpu temperature
bytes 1-4: chip temperature in degrees celsius (little endian format)
bytes 1-4: Chip temperature in degrees celsius (little endian format)
0x83 get device battery voltage
bytes 1-2: battery voltage in millivolt, 0 if unreadable (little endian format)
bytes 1-2: Battery voltage in millivolt, 0 if unreadable (little endian format)
0x84 get device GPS status
bytes 1-4: latitude
bytes 5-8: longitude
byte 9-10: number of satellites
bytes 1-4: Latitude
bytes 5-8: Longitude
byte 9-10: Number of satellites
byte 11-12: HDOP
bytes 13-14: altidute [meter]

View File

@ -11,11 +11,11 @@
; ---> SELECT TARGET PLATFORM HERE! <---
[platformio]
env_default = heltec
;env_default = heltec
;env_default = ttgov1
;env_default = ttgov2
;env_default = ttgov21
;env_default = ttgobeam
env_default = ttgobeam
;env_default = lopy
;env_default = lopy4
;env_default = fipy

View File

@ -27,7 +27,7 @@
// non arduino pin definitions
#define RST LMIC_UNUSED_PIN // connected to ESP32 RST/EN
#define DIO0 GPIO_NUM_26 // ESP32 GPIO26 <-> HPD13A IO0
#define DIO1 GPIO_NUM_33 // Lora1 <-> HPD13A IO1 // !! NEEDS EXTERNAL WIRING !!
#define DIO1 GPIO_NUM_32 // Lora1 <-> HPD13A IO1 // !! NEEDS EXTERNAL WIRING !!
#define DIO2 \
LMIC_UNUSED_PIN // Lora2 <-> HPD13A IO2 // needs external wiring, but not
// necessary for LoRa, only FSK