senddata restructured

src/hal/fipy.h

@@ -1,20 +1,23 @@
 // Hardware related definitions for Pycom FiPy Board
 
+#define HAS_LORA 1 // comment out if device shall not send data via LoRa
+#define HAS_SPI 1  // comment out if device shall not send data via SPI
+
 #define CFG_sx1272_radio 1
-#define HAS_LED NOT_A_PIN // FiPy has no on board LED, so we use RGB LED
-#define HAS_RGB_LED   GPIO_NUM_0  // WS2812B RGB LED on GPIO0
-#define BOARD_HAS_PSRAM // use extra 4MB extern RAM
+#define HAS_LED NOT_A_PIN      // FiPy has no on board LED, so we use RGB LED
+#define HAS_RGB_LED GPIO_NUM_0 // WS2812B RGB LED on GPIO0
+#define BOARD_HAS_PSRAM        // use extra 4MB extern RAM
 
 // Hardware pin definitions for Pycom FiPy board
-#define PIN_SPI_SS    GPIO_NUM_18
-#define PIN_SPI_MOSI  GPIO_NUM_27
-#define PIN_SPI_MISO  GPIO_NUM_19
-#define PIN_SPI_SCK   GPIO_NUM_5
-#define RST   LMIC_UNUSED_PIN
-#define DIO0  GPIO_NUM_23 // LoRa IRQ
-#define DIO1  GPIO_NUM_23 // workaround
-#define DIO2  LMIC_UNUSED_PIN
+#define PIN_SPI_SS GPIO_NUM_18
+#define PIN_SPI_MOSI GPIO_NUM_27
+#define PIN_SPI_MISO GPIO_NUM_19
+#define PIN_SPI_SCK GPIO_NUM_5
+#define RST LMIC_UNUSED_PIN
+#define DIO0 GPIO_NUM_23 // LoRa IRQ
+#define DIO1 GPIO_NUM_23 // workaround
+#define DIO2 LMIC_UNUSED_PIN
 
 // select WIFI antenna (internal = onboard / external = u.fl socket)
-#define HAS_ANTENNA_SWITCH  GPIO_NUM_21 // pin for switching wifi antenna
-#define WIFI_ANTENNA 0  // 0 = internal, 1 = external
+#define HAS_ANTENNA_SWITCH GPIO_NUM_21 // pin for switching wifi antenna
+#define WIFI_ANTENNA 0                 // 0 = internal, 1 = external

src/hal/heltec.h

@@ -1,5 +1,7 @@
 // Hardware related definitions for Heltec LoRa-32 Board
 
+#define HAS_LORA  1       // comment out if device shall not send data via LoRa
+#define HAS_SPI   1       // comment out if device shall not send data via SPI
 #define CFG_sx1276_radio 1
 
 #define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board

src/hal/lolin32.h

@@ -13,6 +13,8 @@
 #define HAS_BUTTON    15  // ESP32 GPIO15 (pin15) Button is on the LoraNode32 shield
 #define BUTTON_PULLUP  1  // Button need pullup instead of default pulldown
 
+#define HAS_LORA  1       // comment out if device shall not send data via LoRa
+#define HAS_SPI   1       // comment out if device shall not send data via SPI
 #define CFG_sx1276_radio 1 // RFM95 module
 
 // re-define pin definitions of pins_arduino.h

src/hal/lolin32lite.h

@@ -12,6 +12,8 @@
 #define HAS_BUTTON    15  // ESP32 GPIO15 (pin15) Button is on the LoraNode32 shield
 #define BUTTON_PULLUP  1  // Button need pullup instead of default pulldown
 
+#define HAS_LORA  1       // comment out if device shall not send data via LoRa
+#define HAS_SPI   1       // comment out if device shall not send data via SPI
 #define CFG_sx1276_radio 1 // RFM95 module
 
 // re-define pin definitions of pins_arduino.h

src/hal/lopy.h

@@ -1,5 +1,7 @@
 // Hardware related definitions for Pycom LoPy Board (not: LoPy4)
 
+#define HAS_LORA  1       // comment out if device shall not send data via LoRa
+#define HAS_SPI   1       // comment out if device shall not send data via SPI
 #define CFG_sx1272_radio 1
 #define HAS_LED NOT_A_PIN // LoPy4 has no on board LED, so we use RGB LED on LoPy4
 #define HAS_RGB_LED GPIO_NUM_0  // WS2812B RGB LED on GPIO0

src/hal/lopy4.h

@@ -1,5 +1,7 @@
 // Hardware related definitions for Pycom LoPy Board (not: LoPy4)
 
+#define HAS_LORA  1       // comment out if device shall not send data via LoRa
+#define HAS_SPI   1       // comment out if device shall not send data via SPI
 #define CFG_sx1276_radio 1
 #define HAS_LED NOT_A_PIN // LoPy4 has no on board LED, so we use RGB LED on LoPy4
 #define HAS_RGB_LED   GPIO_NUM_0  // WS2812B RGB LED on GPIO0

src/hal/ttgobeam.h

@@ -1,5 +1,7 @@
 // Hardware related definitions for TTGO T-Beam board
 
+#define HAS_LORA  1       // comment out if device shall not send data via LoRa
+#define HAS_SPI   1       // comment out if device shall not send data via SPI
 #define CFG_sx1276_radio 1 // HPD13A LoRa SoC
 #define BOARD_HAS_PSRAM // use extra 4MB extern RAM
 

src/hal/ttgov1.h

@@ -1,5 +1,7 @@
 // Hardware related definitions for TTGOv1 board
 
+#define HAS_LORA  1       // comment out if device shall not send data via LoRa
+#define HAS_SPI   1       // comment out if device shall not send data via SPI
 #define CFG_sx1276_radio 1
 
 #define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board

src/hal/ttgov2.h

@@ -1,5 +1,7 @@
 // Hardware related definitions for TTGO V2 Board
 
+#define HAS_LORA  1       // comment out if device shall not send data via LoRa
+#define HAS_SPI   1       // comment out if device shall not send data via SPI
 #define CFG_sx1276_radio 1 // HPD13A LoRa SoC
 
 #define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C

src/hal/ttgov21.h

@@ -6,7 +6,8 @@
 / - labelled v1.6 on pcb -> "new"
 */
 
-
+#define HAS_LORA  1       // comment out if device shall not send data via LoRa
+#define HAS_SPI   1       // comment out if device shall not send data via SPI
 #define CFG_sx1276_radio 1 // HPD13A LoRa SoC
 
 #define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C