From c1bc56bdf9bdcacafbd6c0572603344043729fb4 Mon Sep 17 00:00:00 2001 From: "Fab-Lab.eu" Date: Sat, 6 Oct 2018 20:55:17 +0200 Subject: [PATCH] Create octopus32.h With this config you an run the paxcounter on a #IoT Octopus32 or an Adafruit ESP32 Feather --- src/hal/octopus32.h | 41 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 src/hal/octopus32.h diff --git a/src/hal/octopus32.h b/src/hal/octopus32.h new file mode 100644 index 00000000..a448916c --- /dev/null +++ b/src/hal/octopus32.h @@ -0,0 +1,41 @@ +// Hardware related definitions for #IoT Octopus32 with the Adafruit LoRaWAN Wing +// You can use this configuration also with the Adafruit ESP32 Feather + the LoRaWAN Wing +// In this config we use the Adafruit OLED Wing which is only 128x32 pixel, need to find a smaller font + +// disable brownout detection (avoid unexpected reset on some boards) +#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature + +#define HAS_LED 13 // ESP32 GPIO12 (pin22) On Board LED +#define LED_ACTIVE_LOW 1 // Onboard LED is active when pin is LOW +//#define HAS_RGB_LED 13 // ESP32 GPIO13 (pin13) On Board Shield WS2812B RGB LED +//#define HAS_BUTTON 15 // ESP32 GPIO15 (pin15) Button is on the LoraNode32 shield +//#define BUTTON_PULLUP 1 // Button need pullup instead of default pulldown + +#define HAS_LORA 1 // comment out if device shall not send data via LoRa +#define HAS_SPI 1 // comment out if device shall not send data via SPI +#define CFG_sx1276_radio 1 // RFM95 module + +// re-define pin definitions of pins_arduino.h +#define PIN_SPI_SS 14 //14 // ESP32 GPIO5 (Pin5) -- SX1276 NSS (Pin19) SPI Chip Select Input +#define PIN_SPI_MOSI 18 // ESP32 GPIO23 (Pin23) -- SX1276 MOSI (Pin18) SPI Data Input +#define PIN_SPI_MISO 19 // ESP32 GPIO19 (Pin19) -- SX1276 MISO (Pin17) SPI Data Output +#define PIN_SPI_SCK 5 // ESP32 GPIO18 (Pin18) -- SX1276 SCK (Pin16) SPI Clock Input + +//GPIO_NUM_ +// non arduino pin definitions +#define RST LMIC_UNUSED_PIN // ESP32 GPIO25 (Pin25) -- SX1276 NRESET (Pin7) Reset Trigger Input +#define DIO0 33 // ESP32 GPIO27 (Pin27) -- SX1276 DIO0 (Pin8) used by LMIC for detecting LoRa RX_Done & TX_Done +#define DIO1 33 // ESP32 GPIO26 (Pin26) -- SX1276 DIO1 (Pin9) used by LMIC for detecting LoRa RX_Timeout +#define DIO2 LMIC_UNUSED_PIN // 4 ESP32 GPIO4 (Pin4) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only) +#define DIO5 LMIC_UNUSED_PIN // 35 ESP32 GPIO35 (Pin35) -- SX1276 DIO5 not used by LMIC for LoRa (Timeout for FSK only) + +// Hardware pin definitions for LoRaNode32 Board with OLED I2C Display +#define OLED_RST U8X8_PIN_NONE // Not reset pin +#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // U8X8_SSD1306_128X32_UNIVISION_SW_I2C // +//#define DISPLAY_FLIP 1 // uncomment this for rotated display +#define I2C_SDA 23 //21 // ESP32 GPIO14 (Pin14) -- OLED SDA +#define I2C_SCL 22 //22 // ESP32 GPIO12 (Pin12) -- OLED SCL + +// I2C config for Microchip 24AA02E64 DEVEUI unique address +//#define MCP_24AA02E64_I2C_ADDRESS 0x50 // I2C address for the 24AA02E64 +//#define MCP_24AA02E64_MAC_ADDRESS 0xF8 // Memory adress of unique deveui 64 bits