platformio.ini restructured; delete update.cpp

platformio.ini

@@ -6,7 +6,7 @@
 
 ; ---> SELECT TARGET PLATFORM HERE! <---
 [platformio]
-env_default = generic
+;env_default = generic
 ;env_default = ebox
 ;env_default = eboxtube
 ;env_default = heltec
@@ -15,7 +15,7 @@ env_default = generic
 ;env_default = ttgov2
 ;env_default = ttgov21old
 ;env_default = ttgov21new
-;env_default = ttgobeam
+env_default = ttgobeam
 ;env_default = lopy
 ;env_default = lopy4
 ;env_default = fipy
@@ -29,7 +29,7 @@ description = Paxcounter is a proof-of-concept ESP32 device for metering passeng
 
 [common]
 ; for release_version use max. 10 chars total, use any decimal format like "a.b.c"
-release_version = 1.6.82
+release_version = 1.6.85
 ; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
 ; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
 debug_level = 0
@@ -38,12 +38,10 @@ upload_protocol = esptool
 ;upload_protocol = custom
 extra_scripts = pre:build.py
 keyfile = ota.conf
-platform_espressif32 = espressif32@1.5.0
+;platform_espressif32 = espressif32@1.5.0
+platform_espressif32 = https://github.com/platformio/platform-espressif32.git#a7b1fe6
 board_build.partitions = min_spiffs.csv
 monitor_speed = 115200
-lib_deps_basic =
-    ArduinoJson@^5.13.1
-    Time@>=1.5
 lib_deps_lora = 
 ;    MCCI LoRaWAN LMIC library@^2.2.2
 lib_deps_display =
@@ -52,38 +50,42 @@ lib_deps_rgbled =
     SmartLeds@>=1.1.3
 lib_deps_gps =
     TinyGPSPlus@>=1.0.2
-lib_deps_sensors =
+lib_deps_basic =
-    Adafruit Unified Sensor@^1.0.2
+    ArduinoJson@^5.13.1
-    Adafruit BME680 Library@^1.0.7
+    Time@>=1.5
 lib_deps_all = 
     ${common.lib_deps_basic}
     ${common.lib_deps_lora}
     ${common.lib_deps_display}
     ${common.lib_deps_rgbled}
     ${common.lib_deps_gps}
-    ${common.lib_deps_sensors}
+build_flags_basic =
-build_flags =
+    -include $PROJECTSRC_DIR\\hal\\${PIOENV}.h
-    -include "src/hal/${PIOENV}.h"
+    -include $PROJECTSRC_DIR\\paxcounter.conf
-    -include "src/paxcounter.conf"
     -w
-    ;'-D ARDUINO_LMIC_PROJECT_CONFIG_H="/$PROJECTSRC_DIR/lmic_config.h"'
     '-DARDUINO_LMIC_PROJECT_CONFIG_H=../../../src/lmic_config.h'
     '-DCORE_DEBUG_LEVEL=${common.debug_level}'
     '-DLOG_LOCAL_LEVEL=${common.debug_level}'
     '-DBINTRAY_PACKAGE="${PIOENV}"'
     '-DPROGVERSION="${common.release_version}"'
+build_flags_sensors =
+    -Llib/Bosch-BSEC
+    -llibalgobsec.a
+build_flags_all =
+    ${common.build_flags_basic}
+    ${common.build_flags_sensors}
 
 [env:ebox]
 platform = ${common.platform_espressif32}
 framework = arduino
-board = heltec_wifi_lora_32
+board = esp32dev
 board_build.partitions = ${common.board_build.partitions}
 upload_speed = 115200
 lib_deps = 
     ${common.lib_deps_basic}
     ${common.lib_deps_lora}
 build_flags = 
-    ${common.build_flags}
+    ${common.build_flags_basic}
 upload_protocol = ${common.upload_protocol}
 extra_scripts = ${common.extra_scripts}
 monitor_speed = ${common.monitor_speed}
@@ -91,7 +93,7 @@ monitor_speed = ${common.monitor_speed}
 [env:eboxtube]
 platform = ${common.platform_espressif32}
 framework = arduino
-board = heltec_wifi_lora_32
+board = esp32dev
 board_build.partitions = ${common.board_build.partitions}
 upload_speed = 115200
 lib_deps = 
@@ -99,7 +101,7 @@ lib_deps =
     ${common.lib_deps_lora}
     ${common.lib_deps_rgbled}
 build_flags = 
-    ${common.build_flags}
+    ${common.build_flags_basic}
 upload_protocol = ${common.upload_protocol}
 extra_scripts = ${common.extra_scripts}
 monitor_speed = ${common.monitor_speed}
@@ -115,7 +117,7 @@ lib_deps =
     ${common.lib_deps_lora}
     ${common.lib_deps_display}
 build_flags = 
-    ${common.build_flags}
+    ${common.build_flags_basic}
 upload_protocol = ${common.upload_protocol}
 extra_scripts = ${common.extra_scripts}
 monitor_speed = ${common.monitor_speed}
@@ -131,7 +133,7 @@ lib_deps =
     ${common.lib_deps_lora}
     ${common.lib_deps_display}
 build_flags = 
-    ${common.build_flags}
+    ${common.build_flags_basic}
 upload_protocol = ${common.upload_protocol}
 extra_scripts = ${common.extra_scripts}
 monitor_speed = ${common.monitor_speed}
@@ -147,7 +149,7 @@ lib_deps =
     ${common.lib_deps_lora}
     ${common.lib_deps_display}
 build_flags = 
-    ${common.build_flags}
+    ${common.build_flags_basic}
 upload_protocol = ${common.upload_protocol}
 extra_scripts = ${common.extra_scripts}
 monitor_speed = ${common.monitor_speed}
@@ -163,7 +165,7 @@ lib_deps =
     ${common.lib_deps_lora}
     ${common.lib_deps_display}
 build_flags = 
-    ${common.build_flags}
+    ${common.build_flags_basic}
 upload_protocol = ${common.upload_protocol}
 extra_scripts = ${common.extra_scripts}
 monitor_speed = ${common.monitor_speed}
@@ -171,7 +173,7 @@ monitor_speed = ${common.monitor_speed}
 [env:ttgov21old]
 platform = ${common.platform_espressif32}
 framework = arduino
-board = heltec_wifi_lora_32
+board = esp32dev
 board_build.partitions = ${common.board_build.partitions}
 upload_speed = 921600
 lib_deps = 
@@ -179,7 +181,7 @@ lib_deps =
     ${common.lib_deps_lora}
     ${common.lib_deps_display}
 build_flags = 
-    ${common.build_flags}
+    ${common.build_flags_basic}
 upload_protocol = ${common.upload_protocol}
 extra_scripts = ${common.extra_scripts}
 monitor_speed = ${common.monitor_speed}
@@ -187,7 +189,7 @@ monitor_speed = ${common.monitor_speed}
 [env:ttgov21new]
 platform = ${common.platform_espressif32}
 framework = arduino
-board = heltec_wifi_lora_32
+board = esp32dev
 board_build.partitions = ${common.board_build.partitions}
 upload_speed = 921600
 lib_deps = 
@@ -195,7 +197,7 @@ lib_deps =
     ${common.lib_deps_lora}
     ${common.lib_deps_display}
 build_flags = 
-    ${common.build_flags}
+    ${common.build_flags_basic}
 upload_protocol = ${common.upload_protocol}
 extra_scripts = ${common.extra_scripts}
 monitor_speed = ${common.monitor_speed}
@@ -203,7 +205,7 @@ monitor_speed = ${common.monitor_speed}
 [env:ttgobeam]
 platform = ${common.platform_espressif32}
 framework = arduino
-board = heltec_wifi_lora_32
+board = esp32dev
 board_build.partitions = ${common.board_build.partitions}
 upload_speed = 921600
 lib_deps = 
@@ -211,7 +213,7 @@ lib_deps =
     ${common.lib_deps_lora}
     ${common.lib_deps_gps}
 build_flags = 
-    ${common.build_flags}
+    ${common.build_flags_all}
     -mfix-esp32-psram-cache-issue
 upload_protocol = ${common.upload_protocol}
 extra_scripts = ${common.extra_scripts}
@@ -220,7 +222,7 @@ monitor_speed = ${common.monitor_speed}
 [env:fipy]
 platform = ${common.platform_espressif32}
 framework = arduino
-board = heltec_wifi_lora_32
+board = esp32dev
 board_build.partitions = ${common.board_build.partitions}
 upload_speed = 921600
 lib_deps = 
@@ -228,7 +230,7 @@ lib_deps =
     ${common.lib_deps_lora}
     ${common.lib_deps_rgbled}
 build_flags = 
-    ${common.build_flags}
+    ${common.build_flags_basic}
 upload_protocol = ${common.upload_protocol}
 extra_scripts = ${common.extra_scripts}
 monitor_speed = ${common.monitor_speed}
@@ -236,7 +238,7 @@ monitor_speed = ${common.monitor_speed}
 [env:lopy]
 platform = ${common.platform_espressif32}
 framework = arduino
-board = heltec_wifi_lora_32
+board = lopy4
 board_build.partitions = ${common.board_build.partitions}
 upload_speed = 921600
 lib_deps = 
@@ -245,7 +247,7 @@ lib_deps =
     ${common.lib_deps_rgbled}
     ${common.lib_deps_gps}
 build_flags = 
-    ${common.build_flags}
+    ${common.build_flags_basic}
 upload_protocol = ${common.upload_protocol}
 extra_scripts = ${common.extra_scripts}
 monitor_speed = ${common.monitor_speed}
@@ -253,7 +255,7 @@ monitor_speed = ${common.monitor_speed}
 [env:lopy4]
 platform = ${common.platform_espressif32}
 framework = arduino
-board = heltec_wifi_lora_32
+board = lopy4
 board_build.partitions = ${common.board_build.partitions}
 upload_speed = 921600
 lib_deps =
@@ -262,7 +264,7 @@ lib_deps =
     ${common.lib_deps_rgbled}
     ${common.lib_deps_gps}
 build_flags =
-    ${common.build_flags}
+    ${common.build_flags_basic}
     -mfix-esp32-psram-cache-issue
 upload_protocol = ${common.upload_protocol}
 extra_scripts = ${common.extra_scripts}
@@ -279,7 +281,7 @@ lib_deps =
     ${common.lib_deps_lora}
     ${common.lib_deps_rgbled}
 build_flags =
-    ${common.build_flags}
+    ${common.build_flags_basic}
 upload_protocol = ${common.upload_protocol}
 extra_scripts = ${common.extra_scripts}
 monitor_speed = ${common.monitor_speed}
@@ -295,7 +297,7 @@ lib_deps =
     ${common.lib_deps_lora}
     ${common.lib_deps_rgbled}
 build_flags =
-    ${common.build_flags}
+    ${common.build_flags_basic}
 upload_protocol = ${common.upload_protocol}
 extra_scripts = ${common.extra_scripts}
 monitor_speed = ${common.monitor_speed}
@@ -310,7 +312,7 @@ lib_deps =
     ${common.lib_deps_basic}
     ${common.lib_deps_rgbled}
 build_flags =
-    ${common.build_flags}
+    ${common.build_flags_basic}
 upload_protocol = ${common.upload_protocol}
 extra_scripts = ${common.extra_scripts}
 monitor_speed = ${common.monitor_speed}
@@ -322,7 +324,7 @@ board = featheresp32
 board_build.partitions = ${common.board_build.partitions}
 upload_speed = 921600
 lib_deps = ${common.lib_deps_all}
-build_flags = ${common.build_flags}
+build_flags = ${common.build_flags_all}
 upload_protocol = ${common.upload_protocol}
 extra_scripts = ${common.extra_scripts}
 monitor_speed = ${common.monitor_speed}
@@ -330,11 +332,11 @@ monitor_speed = ${common.monitor_speed}
 [env:generic]
 platform = ${common.platform_espressif32}
 framework = arduino 
-board = heltec_wifi_lora_32
+board = esp32dev
 board_build.partitions = ${common.board_build.partitions}
 upload_speed = 921600
 lib_deps = ${common.lib_deps_all}
-build_flags = ${common.build_flags}
+build_flags = ${common.build_flags_all}
 upload_protocol = ${common.upload_protocol}
 extra_scripts = ${common.extra_scripts}
 monitor_speed = ${common.monitor_speed}

src/update.cpp

@@ -1,375 +0,0 @@
-/*
-this file copied from esp32-arduino library and patched, see PR
-https://github.com/espressif/arduino-esp32/pull/1979
-*/
-
-#include "update.h"
-#include "Arduino.h"
-#include "esp_spi_flash.h"
-#include "esp_ota_ops.h"
-#include "esp_image_format.h"
-
-static const char * _err2str(uint8_t _error){
-    if(_error == UPDATE_ERROR_OK){
-        return ("No Error");
-    } else if(_error == UPDATE_ERROR_WRITE){
-        return ("Flash Write Failed");
-    } else if(_error == UPDATE_ERROR_ERASE){
-        return ("Flash Erase Failed");
-    } else if(_error == UPDATE_ERROR_READ){
-        return ("Flash Read Failed");
-    } else if(_error == UPDATE_ERROR_SPACE){
-        return ("Not Enough Space");
-    } else if(_error == UPDATE_ERROR_SIZE){
-        return ("Bad Size Given");
-    } else if(_error == UPDATE_ERROR_STREAM){
-        return ("Stream Read Timeout");
-    } else if(_error == UPDATE_ERROR_MD5){
-        return ("MD5 Check Failed");
-    } else if(_error == UPDATE_ERROR_MAGIC_BYTE){
-        return ("Wrong Magic Byte");
-    } else if(_error == UPDATE_ERROR_ACTIVATE){
-        return ("Could Not Activate The Firmware");
-    } else if(_error == UPDATE_ERROR_NO_PARTITION){
-        return ("Partition Could Not be Found");
-    } else if(_error == UPDATE_ERROR_BAD_ARGUMENT){
-        return ("Bad Argument");
-    } else if(_error == UPDATE_ERROR_ABORT){
-        return ("Aborted");
-    }
-    return ("UNKNOWN");
-}
-
-static bool _partitionIsBootable(const esp_partition_t* partition){
-    uint8_t buf[4];
-    if(!partition){
-        return false;
-    }
-    if(!ESP.flashRead(partition->address, (uint32_t*)buf, 4)) {
-        return false;
-    }
-
-    if(buf[0] != ESP_IMAGE_HEADER_MAGIC) {
-        return false;
-    }
-    return true;
-}
-
-static bool _enablePartition(const esp_partition_t* partition){
-    uint8_t buf[4];
-    if(!partition){
-        return false;
-    }
-    if(!ESP.flashRead(partition->address, (uint32_t*)buf, 4)) {
-        return false;
-    }
-    buf[0] = ESP_IMAGE_HEADER_MAGIC;
-
-    return ESP.flashWrite(partition->address, (uint32_t*)buf, 4);
-}
-
-UpdateClass::UpdateClass()
-: _error(0)
-, _buffer(0)
-, _bufferLen(0)
-, _size(0)
-, _progress_callback(NULL)
-, _progress(0)
-, _command(U_FLASH)
-, _partition(NULL)
-{
-}
-
-UpdateClass& UpdateClass::onProgress(THandlerFunction_Progress fn) {
-    _progress_callback = fn;
-    return *this;
-}
-
-void UpdateClass::_reset() {
-    if (_buffer)
-        delete[] _buffer;
-    _buffer = 0;
-    _bufferLen = 0;
-    _progress = 0;
-    _size = 0;
-    _command = U_FLASH;
-
-    if(_ledPin != -1) {
-      digitalWrite(_ledPin, !_ledOn); // off
-    }
-}
-
-bool UpdateClass::canRollBack(){
-    if(_buffer){ //Update is running
-        return false;
-    }
-    const esp_partition_t* partition = esp_ota_get_next_update_partition(NULL);
-    return _partitionIsBootable(partition);
-}
-
-bool UpdateClass::rollBack(){
-    if(_buffer){ //Update is running
-        return false;
-    }
-    const esp_partition_t* partition = esp_ota_get_next_update_partition(NULL);
-    return _partitionIsBootable(partition) && !esp_ota_set_boot_partition(partition);
-}
-
-bool UpdateClass::begin(size_t size, int command, int ledPin, uint8_t ledOn) {
-    if(_size > 0){
-        log_w("already running");
-        return false;
-    }
-
-    _ledPin = ledPin;
-    _ledOn = !!ledOn; // 0(LOW) or 1(HIGH)
-
-    _reset();
-    _error = 0;
-
-    if(size == 0) {
-        _error = UPDATE_ERROR_SIZE;
-        return false;
-    }
-
-    if (command == U_FLASH) {
-        _partition = esp_ota_get_next_update_partition(NULL);
-        if(!_partition){
-            _error = UPDATE_ERROR_NO_PARTITION;
-            return false;
-        }
-        log_d("OTA Partition: %s", _partition->label);
-    }
-    else if (command == U_SPIFFS) {
-        _partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_SPIFFS, NULL);
-        if(!_partition){
-            _error = UPDATE_ERROR_NO_PARTITION;
-            return false;
-        }
-    }
-    else {
-        _error = UPDATE_ERROR_BAD_ARGUMENT;
-        log_e("bad command %u", command);
-        return false;
-    }
-
-    if(size == UPDATE_SIZE_UNKNOWN){
-        size = _partition->size;
-    } else if(size > _partition->size){
-        _error = UPDATE_ERROR_SIZE;
-        log_e("too large %u > %u", size, _partition->size);
-        return false;
-    }
-
-    //initialize
-    _buffer = (uint8_t*)malloc(SPI_FLASH_SEC_SIZE);
-    if(!_buffer){
-        log_e("malloc failed");
-        return false;
-    }
-    _size = size;
-    _command = command;
-    _md5.begin();
-    return true;
-}
-
-void UpdateClass::_abort(uint8_t err){
-    _reset();
-    _error = err;
-}
-
-void UpdateClass::abort(){
-    _abort(UPDATE_ERROR_ABORT);
-}
-
-bool UpdateClass::_writeBuffer(){
-    //first bytes of new firmware
-    if(!_progress && _command == U_FLASH){
-        //check magic
-        if(_buffer[0] != ESP_IMAGE_HEADER_MAGIC){
-            _abort(UPDATE_ERROR_MAGIC_BYTE);
-            return false;
-        }
-        //remove magic byte from the firmware now and write it upon success
-        //this ensures that partially written firmware will not be bootable
-        _buffer[0] = 0xFF;
-    }
-    if(!ESP.flashEraseSector((_partition->address + _progress)/SPI_FLASH_SEC_SIZE)){
-        _abort(UPDATE_ERROR_ERASE);
-        return false;
-    }
-    if (!ESP.flashWrite(_partition->address + _progress, (uint32_t*)_buffer, _bufferLen)) {
-        _abort(UPDATE_ERROR_WRITE);
-        return false;
-    }
-    //restore magic or md5 will fail
-    if(!_progress && _command == U_FLASH){
-        _buffer[0] = ESP_IMAGE_HEADER_MAGIC;
-    }
-    _md5.add(_buffer, _bufferLen);
-    _progress += _bufferLen;
-    _bufferLen = 0;
-    return true;
-}
-
-bool UpdateClass::_verifyHeader(uint8_t data) {
-    if(_command == U_FLASH) {
-        if(data != ESP_IMAGE_HEADER_MAGIC) {
-            _abort(UPDATE_ERROR_MAGIC_BYTE);
-            return false;
-        }
-        return true;
-    } else if(_command == U_SPIFFS) {
-        return true;
-    }
-    return false;
-}
-
-bool UpdateClass::_verifyEnd() {
-    if(_command == U_FLASH) {
-        if(!_enablePartition(_partition) || !_partitionIsBootable(_partition)) {
-            _abort(UPDATE_ERROR_READ);
-            return false;
-        }
-
-        if(esp_ota_set_boot_partition(_partition)){
-            _abort(UPDATE_ERROR_ACTIVATE);
-            return false;
-        }
-        _reset();
-        return true;
-    } else if(_command == U_SPIFFS) {
-        _reset();
-        return true;
-    }
-    return false;
-}
-
-bool UpdateClass::setMD5(const char * expected_md5){
-    if(strlen(expected_md5) != 32)
-    {
-        return false;
-    }
-    _target_md5 = expected_md5;
-    return true;
-}
-
-bool UpdateClass::end(bool evenIfRemaining){
-    if(hasError() || _size == 0){
-        return false;
-    }
-
-    if(!isFinished() && !evenIfRemaining){
-        log_e("premature end: res:%u, pos:%u/%u\n", getError(), progress(), _size);
-        _abort(UPDATE_ERROR_ABORT);
-        return false;
-    }
-
-    if(evenIfRemaining) {
-        if(_bufferLen > 0) {
-            _writeBuffer();
-        }
-        _size = progress();
-    }
-
-    _md5.calculate();
-    if(_target_md5.length()) {
-        if(_target_md5 != _md5.toString()){
-            _abort(UPDATE_ERROR_MD5);
-            return false;
-        }
-    }
-
-    return _verifyEnd();
-}
-
-size_t UpdateClass::write(uint8_t *data, size_t len) {
-    if(hasError() || !isRunning()){
-        return 0;
-    }
-
-    if(len > remaining()){
-        _abort(UPDATE_ERROR_SPACE);
-        return 0;
-    }
-
-    size_t left = len;
-
-    while((_bufferLen + left) > SPI_FLASH_SEC_SIZE) {
-        size_t toBuff = SPI_FLASH_SEC_SIZE - _bufferLen;
-        memcpy(_buffer + _bufferLen, data + (len - left), toBuff);
-        _bufferLen += toBuff;
-        if(!_writeBuffer()){
-            return len - left;
-        }
-        left -= toBuff;
-    }
-    memcpy(_buffer + _bufferLen, data + (len - left), left);
-    _bufferLen += left;
-    if(_bufferLen == remaining()){
-        if(!_writeBuffer()){
-            return len - left;
-        }
-    }
-    return len;
-}
-
-size_t UpdateClass::writeStream(Stream &data) {
-    data.setTimeout(RESPONSE_TIMEOUT_MS);
-    size_t written = 0;
-    size_t toRead = 0;
-    if(hasError() || !isRunning())
-        return 0;
-
-    if(!_verifyHeader(data.peek())) {
-        _reset();
-        return 0;
-    }
-    if (_progress_callback) {
-        _progress_callback(0, _size);
-    }
-
-    if(_ledPin != -1) {
-        pinMode(_ledPin, OUTPUT);
-    }
-
-    while(remaining()) {
-        if(_ledPin != -1) {
-            digitalWrite(_ledPin, _ledOn); // Switch LED on
-        }
-        size_t bytesToRead = SPI_FLASH_SEC_SIZE - _bufferLen;
-        if(bytesToRead > remaining()) {
-            bytesToRead = remaining();
-        }
-
-        toRead = data.readBytes(_buffer + _bufferLen,  bytesToRead);
-        if(toRead == 0) { //Timeout
-            delay(100);
-            toRead = data.readBytes(_buffer + _bufferLen, bytesToRead);
-            if(toRead == 0) { //Timeout
-                _abort(UPDATE_ERROR_STREAM);
-                return written;
-            }
-        }
-        if(_ledPin != -1) {
-            digitalWrite(_ledPin, !_ledOn); // Switch LED off
-        }
-        _bufferLen += toRead;
-        if((_bufferLen == remaining() || _bufferLen == SPI_FLASH_SEC_SIZE) && !_writeBuffer())
-            return written;
-        written += toRead;
-        if(_progress_callback) {
-            _progress_callback(_progress, _size);
-        }
-    }
-    if(_progress_callback) {
-        _progress_callback(_size, _size);
-    }
-    return written;
-}
-
-void UpdateClass::printError(Stream &out){
-    out.println(_err2str(_error));
-}
-
-UpdateClass Update;