Merge branch 'development' into master

README.md

@@ -235,7 +235,11 @@ Hereafter described is the default *plain* format, which uses MSB bit numbering.
 
 **Port #8:** Battery voltage data (only if device has feature BATT)
 
-  	byte 1-2:	Battery or USB Voltage [mV], 0 if no battery probe
+  	bytes 1-2:	Battery or USB Voltage [mV], 0 if no battery probe
+
+**Port #9:** Time/Date
+
+  	bytes 1-4:	board's local time/date in UNIX epoch (number of seconds that have elapsed since January 1, 1970 (midnight UTC/GMT), not counting leap seconds) 
 
 # Remote control
 
@@ -358,6 +362,10 @@ Note: all settings are stored in NVRAM and will be reloaded when device starts.
 
 	Device answers with BME680 sensor data set on Port 7.
 
+0x86 get time/date
+
+	Device answers with it's local time/date (UTC Unix epoch) on Port 9.
+
 	
 # License
 

include/clockcontroller.h

@@ -1,15 +0,0 @@
-#ifndef _CLOCKCONTROLLER_H
-#define _CLOCKCONTROLLER_H
-
-#include "globals.h"
-
-#ifdef HAS_IF482
-#include "if482.h"
-#elif defined HAS_DCF77
-#include "dcf77.h"
-#endif
-
-void clock_init(void);
-void clock_loop(void *pvParameters);
-
-#endif // _CLOCKCONTROLLER_H

include/cyclic.h

@@ -5,15 +5,12 @@
 #include "senddata.h"
 #include "rcommand.h"
 #include "spislave.h"
-#include "rtctime.h"
 #include <lmic.h>
 
 #ifdef HAS_BME
 #include "bme680mems.h"
 #endif
 
-
-
 void doHousekeeping(void);
 uint64_t uptime(void);
 void reset_counters(void);

include/dcf77.h

@@ -6,14 +6,18 @@
 #define DCF77_FRAME_SIZE (60)
 #define DCF77_PULSE_LENGTH (100)
 
-extern uint8_t DCFpulse[];
+#ifdef DCF77_ACTIVE_LOW
-
+enum dcf_pinstate { dcf_high, dcf_low };
-enum dcf_pulses { dcf_off, dcf_zero, dcf_one };
+#else
 enum dcf_pinstate { dcf_low, dcf_high };
+#endif
 
-void DCF_Pulse(time_t t);
+enum DCF77_Pulses { dcf_Z, dcf_0, dcf_1 };
-void IRAM_ATTR DCF77_Frame(time_t t);
+
-void set_DCF77_pin(dcf_pinstate state);
+void DCF77_Pulse(time_t t, uint8_t const *DCFpulse);
-uint8_t dec2bcd(uint8_t dec, uint8_t startpos, uint8_t endpos, uint8_t pArray[]);
+uint8_t *IRAM_ATTR DCF77_Frame(time_t const t);
+uint8_t IRAM_ATTR dec2bcd(uint8_t const dec, uint8_t const startpos, uint8_t const endpos,
+                          uint8_t *DCFpulse);
+uint8_t IRAM_ATTR setParityBit(uint8_t const p);
 
 #endif

include/display.h

@@ -3,9 +3,9 @@
 
 #include <U8x8lib.h>
 #include "cyclic.h"
-#include "rtctime.h"
 
-extern uint8_t volatile DisplayState;
+extern uint8_t DisplayState;
+
 extern HAS_DISPLAY u8x8;
 
 void init_display(const char *Productname, const char *Version);

include/globals.h

@@ -7,6 +7,7 @@
 // Time functions
 #include <Time.h>
 #include <Timezone.h>
+#include <RtcDateTime.h>
 
 // std::set for unified array functions
 #include <set>
@@ -96,6 +97,7 @@ typedef struct {
 } bmeStatus_t;
 
 enum sendprio_t { prio_low, prio_normal, prio_high };
+enum timesource_t { _gps, _rtc, _lora, _unsynced };
 
 extern std::set<uint16_t, std::less<uint16_t>, Mallocator<uint16_t>> macs;
 extern std::array<uint64_t, 0xff>::iterator it;
@@ -105,13 +107,15 @@ extern configData_t cfg;                      // current device configuration
 extern char display_line6[], display_line7[]; // screen buffers
 extern uint8_t volatile channel;              // wifi channel rotation counter
 extern uint16_t volatile macs_total, macs_wifi, macs_ble,
-    batt_voltage; // display values
+    batt_voltage;                   // display values
-extern bool volatile TimePulseTick;
+extern bool volatile TimePulseTick; // 1sec pps flag set by GPS or RTC
-extern hw_timer_t *sendCycle, *displaytimer;
+extern timesource_t timeSource;
+extern hw_timer_t *sendCycle, *displaytimer, *clockCycle;
 extern SemaphoreHandle_t I2Caccess, TimePulse;
 extern TaskHandle_t irqHandlerTask, ClockTask;
 extern TimerHandle_t WifiChanTimer;
 extern Timezone myTZ;
+extern time_t userUTCTime;
 
 // application includes
 #include "led.h"

include/gpsread.h

@@ -2,15 +2,21 @@
 #define _GPSREAD_H
 
 #include <TinyGPS++.h> // library for parsing NMEA data
+#include <RtcDateTime.h>
+#include "timekeeper.h"
 
 #ifdef GPS_I2C // Needed for reading from I2C Bus
 #include <Wire.h>
 #endif
 
+#define NMEA_FRAME_SIZE 80 // NEMA has a maxium of 80 bytes per record
+#define NMEA_BUFFERTIME 50 // 50ms safety time regardless
+
 extern TinyGPSPlus gps; // Make TinyGPS++ instance globally availabe
 extern gpsStatus_t
     gps_status; // Make struct for storing gps data globally available
 extern TaskHandle_t GpsTask;
+extern TickType_t const gpsDelay_ticks; // time to NMEA arrival
 
 int gps_init(void);
 void gps_read(void);

include/if482.h

@@ -2,15 +2,14 @@
 #define _IF482_H
 
 #include "globals.h"
+#include "timekeeper.h"
 
 #define IF482_FRAME_SIZE (17)
 #define IF482_PULSE_LENGTH (1000)
 
-extern HardwareSerial IF482; 
+extern HardwareSerial IF482;
 
 void IF482_Pulse(time_t t);
 String IRAM_ATTR IF482_Frame(time_t tt);
-TickType_t tx_Ticks(unsigned long baud, uint32_t config, int8_t rxPin,
-                   int8_t txPins);
 
 #endif

include/irqhandler.h

@@ -9,6 +9,7 @@
 #include "globals.h"
 #include "cyclic.h"
 #include "senddata.h"
+#include "timekeeper.h"
 
 void irqHandler(void *pvParameters);
 void IRAM_ATTR homeCycleIRQ();

include/lorawan.h

@@ -3,6 +3,7 @@
 
 #include "globals.h"
 #include "rcommand.h"
+#include "timekeeper.h"
 
 // LMIC-Arduino LoRaWAN Stack
 #include <lmic.h>
@@ -10,17 +11,15 @@
 #include <SPI.h>
 #include <arduino_lmic_hal_boards.h>
 #include "loraconf.h"
-#include "rtctime.h"
 
 // Needed for 24AA02E64, does not hurt anything if included and not used
 #ifdef MCP_24AA02E64_I2C_ADDRESS
 #include <Wire.h>
 #endif
 
-
-
 extern QueueHandle_t LoraSendQueue;
 
+esp_err_t lora_stack_init();
 void onEvent(ev_t ev);
 void gen_lora_deveui(uint8_t *pdeveui);
 void RevBytes(unsigned char *b, size_t c);
@@ -36,7 +35,4 @@ void lora_queuereset(void);
 void lora_housekeeping(void);
 void user_request_network_time_callback(void *pVoidUserUTCTime,
                                         int flagSuccess);
-
-esp_err_t lora_stack_init();
-
 #endif

include/main.h

@@ -17,6 +17,5 @@
 #include "led.h"
 #include "spislave.h"
 #include "lorawan.h"
-#include "rtctime.h"
+#include "timekeeper.h"
-#include "clockcontroller.h"
 #endif

include/payload.h

@@ -1,7 +1,8 @@
 #ifndef _PAYLOAD_H_
 #define _PAYLOAD_H_
 
-// MyDevices CayenneLPP channels for dynamic sensor payload format
+// MyDevices CayenneLPP 1.0 channels for Synamic sensor payload format
+// all payload goes out on LoRa FPort 1
 #if (PAYLOAD_ENCODER == 3)
 
 #define LPP_GPS_CHANNEL 20
@@ -19,7 +20,7 @@
 
 #endif
 
-// MyDevices CayenneLPP types
+// MyDevices CayenneLPP 2.0 types for Packed Sensor Payload, not using channels, but different FPorts
 #define LPP_GPS 136          // 3 byte lon/lat 0.0001 °, 3 bytes alt 0.01m
 #define LPP_TEMPERATURE 103  // 2 bytes, 0.1°C signed MSB
 #define LPP_DIGITAL_INPUT 0  // 1 byte
@@ -49,6 +50,7 @@ public:
   void addBME(bmeStatus_t value);
   void addButton(uint8_t value);
   void addSensor(uint8_t[]);
+  void addTime(time_t value);
 
 #if PAYLOAD_ENCODER == 1 // format plain
 

include/rtctime.h

@@ -2,27 +2,16 @@
 #define _RTCTIME_H
 
 #include "globals.h"
+#include "timekeeper.h"
 #include <Wire.h> // must be included here so that Arduino library object file references work
 #include <RtcDS3231.h>
 
-#ifdef HAS_GPS
-#include "gpsread.h"
-#endif
-
 extern RtcDS3231<TwoWire> Rtc; // make RTC instance globally available
 
-int rtc_init(void);
+uint8_t rtc_init(void);
-int set_rtctime(uint32_t t);
+uint8_t set_rtctime(time_t t);
-int set_rtctime(time_t t);
 void sync_rtctime(void);
 time_t get_rtctime(void);
 float get_rtctemp(void);
-void IRAM_ATTR CLOCKIRQ(void);
-int timepulse_init(void);
-void timepulse_start(void);
-int sync_TimePulse(void);
-int sync_SysTime(time_t);
-int sync_SysTime(uint32_t t);
-time_t best_time(void);
 
 #endif // _RTCTIME_H

include/timekeeper.h

@@ -0,0 +1,32 @@
+#ifndef _timekeeper_H
+#define _timekeeper_H
+
+#include "globals.h"
+#include "rtctime.h"
+#include "TimeLib.h"
+
+#ifdef HAS_GPS
+#include "gpsread.h"
+#endif
+#ifdef HAS_IF482
+#include "if482.h"
+#elif defined HAS_DCF77
+#include "dcf77.h"
+#endif
+
+extern const char timeSetSymbols[];
+
+void IRAM_ATTR CLOCKIRQ(void);
+void clock_init(void);
+void clock_loop(void *pvParameters);
+void timepulse_start(void);
+uint8_t timepulse_init(void);
+time_t timeIsValid(time_t const t);
+time_t timeProvider(void);
+time_t compiledUTC(void);
+time_t tmConvert(uint16_t YYYY, uint8_t MM, uint8_t DD, uint8_t hh, uint8_t mm,
+                 uint8_t ss);
+TickType_t tx_Ticks(uint32_t framesize, unsigned long baud, uint32_t config,
+                    int8_t rxPin, int8_t txPins);
+
+#endif // _timekeeper_H

lib/microTime

@@ -0,0 +1 @@
+Subproject commit 6d5b82c554590f49864cc44ce295ec91dcf1114e

platformio.ini

@@ -6,7 +6,7 @@
 
 ; ---> SELECT TARGET PLATFORM HERE! <---
 [platformio]
-env_default = generic
+;env_default = generic
 ;env_default = ebox
 ;env_default = eboxtube
 ;env_default = heltec
@@ -16,7 +16,7 @@ env_default = generic
 ;env_default = ttgov21old
 ;env_default = ttgov21new
 ;env_default = ttgobeam
-;env_default = ttgofox
+env_default = ttgofox
 ;env_default = lopy
 ;env_default = lopy4
 ;env_default = fipy
@@ -30,16 +30,16 @@ description = Paxcounter is a proof-of-concept ESP32 device for metering passeng
 
 [common]
 ; for release_version use max. 10 chars total, use any decimal format like "a.b.c"
-release_version = 1.7.31
+release_version = 1.7.323
 ; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
 ; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
-debug_level = 0
+debug_level = 4
 ; UPLOAD MODE: select esptool to flash via USB/UART, select custom to upload to cloud for OTA
 upload_protocol = esptool
 ;upload_protocol = custom
 extra_scripts = pre:build.py
 keyfile = ota.conf
-platform_espressif32 = espressif32@1.6.0
+platform_espressif32 = espressif32@1.7.0
 ;platform_espressif32 = https://github.com/platformio/platform-espressif32.git#feature/stage
 board_build.partitions = min_spiffs.csv
 monitor_speed = 115200

src/battery.cpp

@@ -1,7 +1,7 @@
 #include "globals.h"
 
 // Local logging tag
-static const char TAG[] = "main";
+static const char TAG[] = __FILE__;
 
 #ifdef HAS_BATTERY_PROBE
 esp_adc_cal_characteristics_t *adc_characs =
@@ -48,7 +48,6 @@ uint16_t read_voltage() {
 #ifdef BATT_FACTOR
   voltage *= BATT_FACTOR;
 #endif
-  ESP_LOGD(TAG, "Raw: %d / Voltage: %dmV", adc_reading, voltage);
   return voltage;
 #else
   return 0;

src/bme680mems.cpp

@@ -3,7 +3,7 @@
 #include "bme680mems.h"
 
 // Local logging tag
-static const char TAG[] = "main";
+static const char TAG[] = __FILE__;
 
 bmeStatus_t bme_status;
 TaskHandle_t BmeTask;

src/button.cpp

@@ -4,7 +4,7 @@
 #include "button.h"
 
 // Local logging tag
-static const char TAG[] = "main";
+static const char TAG[] = __FILE__;
 
 void readButton() {
     ESP_LOGI(TAG, "Button pressed");

src/clockcontroller.cpp

@@ -1,74 +0,0 @@
-#include "clockcontroller.h"
-
-#if defined HAS_IF482 || defined HAS_DCF77
-
-#if defined HAS_DCF77 && defined HAS_IF482
-#error You must define at most one of IF482 or DCF77!
-#endif
-
-// Local logging tag
-static const char TAG[] = "main";
-
-void clock_init(void) {
-
-// setup clock output interface
-#ifdef HAS_IF482
-  IF482.begin(HAS_IF482);
-#elif defined HAS_DCF77
-  pinMode(HAS_DCF77, OUTPUT);
-#endif
-
-  xTaskCreatePinnedToCore(clock_loop,  // task function
-                          "clockloop", // name of task
-                          2048,        // stack size of task
-                          (void *)1,   // task parameter
-                          4,           // priority of the task
-                          &ClockTask,  // task handle
-                          0);          // CPU core
-
-  assert(ClockTask); // has clock task started?
-} // clock_init
-
-void clock_loop(void *pvParameters) { // ClockTask
-
-  configASSERT(((uint32_t)pvParameters) == 1); // FreeRTOS check
-
-  TickType_t wakeTime;
-  time_t t;
-
-#define t1(t) (t + DCF77_FRAME_SIZE + 1) // future time for next frame
-
-// preload first DCF frame before start
-#ifdef HAS_DCF77
-  DCF77_Frame(t1(best_time()));
-#endif
-
-  // output time telegram for second following sec beginning with timepulse
-  for (;;) {
-    xTaskNotifyWait(0x00, ULONG_MAX, &wakeTime,
-                    portMAX_DELAY); // wait for timepulse
-
-    if (timeStatus() == timeNotSet) // do we have valid time?
-      continue;
-
-    t = best_time(); // time to send to clock
-
-#if defined HAS_IF482
-
-    IF482_Pulse(t + 1); // next second
-
-#elif defined HAS_DCF77
-
-    if (second(t) == DCF77_FRAME_SIZE - 1) // moment to reload frame?
-      DCF77_Frame(t1(t));                  // generate next frame
-
-    if (DCFpulse[DCF77_FRAME_SIZE] ==
-        minute(t1(t)))  // do he have a recent frame?
-      DCF_Pulse(t + 1); // then output next second of current frame
-
-#endif
-
-  } // for
-} // clock_loop()
-
-#endif // HAS_IF482 || defined HAS_DCF77

src/cyclic.cpp

@@ -5,11 +5,7 @@
 #include "cyclic.h"
 
 // Local logging tag
-static const char TAG[] = "main";
+static const char TAG[] = __FILE__;
-
-time_t userUTCTime; // Seconds since the UTC epoch
-unsigned long nextLoraTimeSync = millis();
-unsigned long nextGPSTimeSync = millis();
 
 // do all housekeeping
 void doHousekeeping() {
@@ -21,36 +17,11 @@ void doHousekeeping() {
   if (cfg.runmode == 1)
     do_reset();
 
+#ifdef HAS_SPI
   spi_housekeeping();
+#endif
+#ifdef HAS_LORA
   lora_housekeeping();
-
-// do cyclic sync of systime with GPS timepulse, if present
-#if defined HAS_GPS && defined TIME_SYNC_INTERVAL_GPS
-  if (millis() >= nextGPSTimeSync) {
-    nextGPSTimeSync = millis() + TIME_SYNC_INTERVAL_GPS *
-                                     60000; // set up next time sync period
-
-    // sync systime on next timepulse
-    if (sync_SysTime(get_gpstime())) {
-      //setSyncProvider(get_gpstime);
-#ifdef HAS_RTC
-      set_rtctime(now()); // epoch time
-#endif
-      ESP_LOGI(TAG, "GPS has set the system time");
-    } else
-      ESP_LOGI(TAG, "Unable to sync system time with GPS");
-  } // if
-#endif
-
-// do cyclic time sync with LORA network, if present
-#if defined HAS_LORA && defined TIME_SYNC_INTERVAL_LORA
-  if (millis() >= nextLoraTimeSync) {
-    nextLoraTimeSync = millis() + TIME_SYNC_INTERVAL_LORA *
-                                      60000; // set up next time sync period
-    // Schedule a network time sync request at the next possible time
-    LMIC_requestNetworkTime(user_request_network_time_callback, &userUTCTime);
-    ESP_LOGI(TAG, "LORAWAN time request scheduled");
-  }
 #endif
 
   // task storage debugging //

src/dcf77.cpp

@@ -14,19 +14,15 @@ https://github.com/udoklein/dcf77
 #include "dcf77.h"
 
 // Local logging tag
-static const char TAG[] = "main";
+static const char TAG[] = __FILE__;
 
-// array of dcf pulses for one minute
+// triggered by second timepulse to ticker out DCF signal
-uint8_t DCFpulse[DCF77_FRAME_SIZE + 1];
+void DCF77_Pulse(time_t t, uint8_t const *DCFpulse) {
-
-// triggered by 1 second timepulse to ticker out DCF signal
-void DCF_Pulse(time_t t) {
-
-  uint8_t sec = second(t);
 
   TickType_t startTime = xTaskGetTickCount();
+  uint8_t sec = second(t);
 
-  ESP_LOGD(TAG, "DCF77 sec %d", sec);
+  ESP_LOGD (TAG, "DCF second %d", sec);
 
   // induce 10 pulses
   for (uint8_t pulse = 0; pulse <= 9; pulse++) {
@@ -34,91 +30,84 @@ void DCF_Pulse(time_t t) {
     switch (pulse) {
 
     case 0: // start of second -> start of timeframe for logic signal
-      if (DCFpulse[sec] != dcf_off)
+      if (DCFpulse[sec] != dcf_Z)
-        set_DCF77_pin(dcf_low);
+        digitalWrite(HAS_DCF77, dcf_low);
-      else // 59th second reached, nothing more to do
-        return;
       break;
 
     case 1: // 100ms after start of second -> end of timeframe for logic 0
-      if (DCFpulse[sec] == dcf_zero)
+      if (DCFpulse[sec] == dcf_0)
-        set_DCF77_pin(dcf_high);
+        digitalWrite(HAS_DCF77, dcf_high);
       break;
 
     case 2: // 200ms after start of second -> end of timeframe for logic 1
-      set_DCF77_pin(dcf_high);
+      digitalWrite(HAS_DCF77, dcf_high);
       break;
 
     case 9: // 900ms after start -> last pulse
-      return;
+      break;
 
     } // switch
 
+    // pulse pause
     vTaskDelayUntil(&startTime, pdMS_TO_TICKS(DCF77_PULSE_LENGTH));
 
   } // for
-} // DCF_Pulse()
+} // DCF77_Pulse()
 
-void IRAM_ATTR DCF77_Frame(time_t tt) {
+uint8_t *IRAM_ATTR DCF77_Frame(time_t const tt) {
+
+  // array of dcf pulses for one minute, secs 0..16 and 20 are never touched, so
+  // we keep them statically to avoid same recalculation every minute
+
+  static uint8_t DCFpulse[DCF77_FRAME_SIZE + 1] = {
+      dcf_0, dcf_0, dcf_0, dcf_0, dcf_0, dcf_0, dcf_0,
+      dcf_0, dcf_0, dcf_0, dcf_0, dcf_0, dcf_0, dcf_0,
+      dcf_0, dcf_0, dcf_0, dcf_0, dcf_0, dcf_0, dcf_1};
 
   uint8_t Parity;
   time_t t = myTZ.toLocal(tt); // convert to local time
 
-  ESP_LOGD(TAG, "DCF77 minute %d", minute(t));
+  // ENCODE DST CHANGE ANNOUNCEMENT (Sec 16)
+  DCFpulse[16] = dcf_0; // not yet implemented
 
-  // ENCODE HEAD
+  // ENCODE DAYLIGHTSAVING (secs 17..18)
-  // secs 0..19 initialized with zeros
+  DCFpulse[17] = myTZ.locIsDST(t) ? dcf_1 : dcf_0;
-  for (int n = 0; n <= 19; n++)
+  DCFpulse[18] = myTZ.locIsDST(t) ? dcf_0 : dcf_1;
-    DCFpulse[n] = dcf_zero;
-  // secs 17..18: adjust for DayLightSaving
-  DCFpulse[18 - (myTZ.locIsDST(t) ? 1 : 0)] = dcf_one;
-  // sec 20: must be 1 to indicate time active
-  DCFpulse[20] = dcf_one;
 
   // ENCODE MINUTE (secs 21..28)
   Parity = dec2bcd(minute(t), 21, 27, DCFpulse);
-  DCFpulse[28] = (Parity & 1) ? dcf_one : dcf_zero;
+  DCFpulse[28] = setParityBit(Parity);
 
   // ENCODE HOUR (secs 29..35)
   Parity = dec2bcd(hour(t), 29, 34, DCFpulse);
-  DCFpulse[35] = (Parity & 1) ? dcf_one : dcf_zero;
+  DCFpulse[35] = setParityBit(Parity);
 
   // ENCODE DATE (secs 36..58)
   Parity = dec2bcd(day(t), 36, 41, DCFpulse);
   Parity += dec2bcd((weekday(t) - 1) ? (weekday(t) - 1) : 7, 42, 44, DCFpulse);
   Parity += dec2bcd(month(t), 45, 49, DCFpulse);
-  Parity += dec2bcd(year(t) - 2000, 50, 57,
+  Parity += dec2bcd(year(t) - 2000, 50, 57, DCFpulse);
-                    DCFpulse); // yes, we have a millenium 3000 bug here ;-)
+  DCFpulse[58] = setParityBit(Parity);
-  DCFpulse[58] = (Parity & 1) ? dcf_one : dcf_zero;
 
-  // ENCODE TAIL (sec 59)
+  // ENCODE MARK (sec 59)
-  DCFpulse[59] = dcf_off;
+  DCFpulse[59] = dcf_Z; // !! missing code here for leap second !!
-  // !! missing code here for leap second !!
 
-  // timestamp the frame with minute pointer
+  // timestamp this frame with it's minute
   DCFpulse[60] = minute(t);
 
-  /*
+  return DCFpulse;
-    // for debug: print the DCF77 frame buffer
+
-    char out[DCF77_FRAME_SIZE + 1];
+} // DCF77_Frame()
-    uint8_t i;
-    for (i = 0; i < DCF77_FRAME_SIZE; i++) {
-      out[i] = DCFpulse[i] + '0'; // convert int digit to printable ascii
-    }
-    out[DCF77_FRAME_SIZE] = '\0'; // string termination char
-    ESP_LOGD(TAG, "DCF minute %d = %s", DCFpulse[DCF77_FRAME_SIZE], out);
-  */
-}
 
 // helper function to convert decimal to bcd digit
-uint8_t IRAM_ATTR dec2bcd(uint8_t dec, uint8_t startpos, uint8_t endpos,
+uint8_t IRAM_ATTR dec2bcd(uint8_t const dec, uint8_t const startpos, uint8_t const endpos,
-                uint8_t pArray[]) {
+                          uint8_t *DCFpulse) {
 
   uint8_t data = (dec < 10) ? dec : ((dec / 10) << 4) + (dec % 10);
   uint8_t parity = 0;
 
-  for (uint8_t n = startpos; n <= endpos; n++) {
+  for (uint8_t i = startpos; i <= endpos; i++) {
-    pArray[n] = (data & 1) ? dcf_one : dcf_zero;
+    DCFpulse[i] = (data & 1) ? dcf_1 : dcf_0;
     parity += (data & 1);
     data >>= 1;
   }
@@ -126,24 +115,7 @@ uint8_t IRAM_ATTR dec2bcd(uint8_t dec, uint8_t startpos, uint8_t endpos,
   return parity;
 }
 
-// helper function to switch GPIO line with DCF77 signal
+// helper function to encode parity
-void set_DCF77_pin(dcf_pinstate state) {
+uint8_t IRAM_ATTR setParityBit(uint8_t const p) { return ((p & 1) ? dcf_1 : dcf_0); }
-  switch (state) {
-  case dcf_low:
-#ifdef DCF77_ACTIVE_LOW
-    digitalWrite(HAS_DCF77, HIGH);
-#else
-    digitalWrite(HAS_DCF77, LOW);
-#endif
-    break;
-  case dcf_high:
-#ifdef DCF77_ACTIVE_LOW
-    digitalWrite(HAS_DCF77, LOW);
-#else
-    digitalWrite(HAS_DCF77, HIGH);
-#endif
-    break;
-  } // switch
-} // DCF77_pulse
 
 #endif // HAS_DCF77

src/display.cpp

@@ -41,21 +41,11 @@ const char lora_datarate[] = {"1211100908078CNA1211109C8C7C"};
 const char lora_datarate[] = {"121110090807FSNA"};
 #endif
 
-// time display symbols
-#if defined HAS_GPS || defined HAS_RTC
-const char timeNosyncSymbol = '?';
-#if defined HAS_IF482
-const char timesyncSymbol = '+';
-#elif defined HAS_DCF77
-const char timesyncSymbol = '*';
-#endif
-#endif
-
 // helper arry for converting month values to text
 const char *printmonth[] = {"xxx", "Jan", "Feb", "Mar", "Apr", "May", "Jun",
                             "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"};
 
-uint8_t volatile DisplayState = 0;
+uint8_t DisplayState = 0;
 
 // helper function, prints a hex key on display
 void DisplayKey(const uint8_t *key, uint8_t len, bool lsb) {
@@ -134,16 +124,14 @@ void init_display(const char *Productname, const char *Version) {
     u8x8.printf(!cfg.rssilimit ? "RLIM:off " : "RLIM:%d", cfg.rssilimit);
 
     I2C_MUTEX_UNLOCK(); // release i2c bus access
-  }
+  }                     // mutex
-
 } // init_display
 
 void refreshtheDisplay() {
 
   uint8_t msgWaiting;
-  char timeSync, timeState;
+  char timeState, buff[16];
-  char buff[16]; // 16 chars line buffer
+  time_t t = myTZ.toLocal(now()); // note: call now() here *before* locking mutex!
-  time_t t;
 
   // block i2c bus access
   if (I2C_MUTEX_LOCK()) {
@@ -155,8 +143,10 @@ void refreshtheDisplay() {
     }
 
     // if display is switched off we don't refresh it to relax cpu
-    if (!DisplayState)
+    if (!DisplayState) {
+      I2C_MUTEX_UNLOCK(); // release i2c bus access
       return;
+    }
 
     // update counter (lines 0-1)
     snprintf(
@@ -225,9 +215,7 @@ void refreshtheDisplay() {
     // update LoRa status display (line 6)
     u8x8.printf("%-16s", display_line6);
 #else // we want a systime display instead LoRa status
-    t = myTZ.toLocal(best_time());
+    timeState = TimePulseTick ? ' ' : timeSetSymbols[timeSource];
-    timeSync = (timeStatus() == timeSet) ? timesyncSymbol : timeNosyncSymbol;
-    timeState = TimePulseTick ? timeSync : ' ';
     TimePulseTick = false;
     u8x8.printf("%02d:%02d:%02d%c %2d.%3s", hour(t), minute(t), second(t),
                 timeState, day(t), printmonth[month(t)]);
@@ -249,8 +237,7 @@ void refreshtheDisplay() {
 #endif // HAS_LORA
 
     I2C_MUTEX_UNLOCK(); // release i2c bus access
-  }
+  }                     // mutex
-
 } // refreshDisplay()
 
 #endif // HAS_DISPLAY

src/gpsread.cpp

@@ -3,7 +3,7 @@
 #include "globals.h"
 
 // Local logging tag
-static const char TAG[] = "main";
+static const char TAG[] = __FILE__;
 
 TinyGPSPlus gps;
 gpsStatus_t gps_status;
@@ -11,6 +11,10 @@ TaskHandle_t GpsTask;
 
 #ifdef GPS_SERIAL
 HardwareSerial GPS_Serial(1); // use UART #1
+TickType_t const gpsDelay_ticks = pdMS_TO_TICKS(1000 - NMEA_BUFFERTIME) -
+                                  tx_Ticks(NMEA_FRAME_SIZE, GPS_SERIAL);
+#else
+TickType_t const gpsDelay_ticks = pdMS_TO_TICKS(1000 - NMEA_BUFFERTIME);
 #endif
 
 // initialize and configure GPS
@@ -23,6 +27,13 @@ int gps_init(void) {
     return 0;
   }
 
+// set timeout for reading recent time from GPS
+#ifdef GPS_SERIAL // serial GPS
+
+#else // I2C GPS
+
+#endif
+
 #if defined GPS_SERIAL
   GPS_Serial.begin(GPS_SERIAL);
   ESP_LOGI(TAG, "Using serial GPS");
@@ -73,32 +84,23 @@ void gps_read() {
            gps.passedChecksum(), gps.failedChecksum(), gps.sentencesWithFix());
 }
 
-// helper function to convert gps date/time into time_t
-time_t tmConvert_t(uint16_t YYYY, uint8_t MM, uint8_t DD, uint8_t hh,
-                   uint8_t mm, uint8_t ss) {
-  tmElements_t tm;
-  tm.Year = YYYY - 1970; // note year argument is offset from 1970 in time.h
-  tm.Month = MM;
-  tm.Day = DD;
-  tm.Hour = hh;
-  tm.Minute = mm;
-  tm.Second = ss;
-  return makeTime(tm);
-}
-
 // function to fetch current time from gps
 time_t get_gpstime(void) {
-  // !! never call now() or delay in this function, this would break this
-  // function to be used as SyncProvider for Time.h
 
-  time_t t = 0; // 0 effects calling SyncProvider() to not set time
+  // set time to wait for arrive next recent NMEA time record
+  static const uint32_t gpsDelay_ms = gpsDelay_ticks / portTICK_PERIOD_MS;
 
-  if ((gps.time.age() < 1500) && (gps.time.isValid())) {
+  time_t t = 0;
-    // get current gps time
+
-    t = tmConvert_t(gps.date.year(), gps.date.month(), gps.date.day(),
+  if ((gps.time.age() < gpsDelay_ms) && (gps.time.isValid()) && (gps.date.isValid())) {
+
+      ESP_LOGD(TAG, "GPS time age: %dms, second: %d, is valid: %s", gps.time.age(), gps.time.second(),
+               gps.time.isValid() ? "yes" : "no");
+
+      t = tmConvert(gps.date.year(), gps.date.month(), gps.date.day(),
                     gps.time.hour(), gps.time.minute(), gps.time.second());
-  }
+    }
-  return t;
+  return timeIsValid(t);
 } // get_gpstime()
 
 // GPS serial feed FreeRTos Task

src/hal/ttgobeam.h

@@ -25,20 +25,24 @@
 #define GPS_SERIAL 9600, SERIAL_8N1, GPIO_NUM_12, GPIO_NUM_15 // UBlox NEO 6M
 //#define GPS_INT GPIO_NUM_34 // 30ns accurary timepulse, to be external wired on pcb: NEO 6M Pin#3 -> GPIO34
 
+// Settings for on board DS3231 RTC chip
+//#define HAS_RTC MY_OLED_SDA, MY_OLED_SCL // SDA, SCL
+//#define RTC_INT GPIO_NUM_13 // timepulse with accuracy +/- 2*e-6 [microseconds] = 0,1728sec / day
+
 // enable only if device has these sensors, otherwise comment these lines
 // BME680 sensor on I2C bus
-//#define HAS_BME SDA, SCL
+#define HAS_BME SDA, SCL
-//#define BME_ADDR BME680_I2C_ADDR_PRIMARY // !! connect SDIO of BME680 to GND !!
+#define BME_ADDR BME680_I2C_ADDR_PRIMARY // !! connect SDIO of BME680 to GND !!
 
 // display (if connected)
-//#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
+#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
-//#define MY_OLED_SDA SDA
+#define MY_OLED_SDA SDA
-//#define MY_OLED_SCL SCL
+#define MY_OLED_SCL SCL
-//#define MY_OLED_RST U8X8_PIN_NONE
+#define MY_OLED_RST U8X8_PIN_NONE
 //#define DISPLAY_FLIP  1 // use if display is rotated
 
 // Settings for DCF77 interface
-//#define HAS_DCF77 GPIO_NUM_13
+#define HAS_DCF77 GPIO_NUM_13
 
 // Settings for IF482 interface
 //#define HAS_IF482 9600, SERIAL_7E1, GPIO_NUM_12, GPIO_NUM_14 // IF482 serial port parameters

src/hal/ttgofox.h

@@ -28,12 +28,13 @@
 //#define HAS_IF482 9600, SERIAL_7E1, GPIO_NUM_12, GPIO_NUM_14 // IF482 serial port parameters
 
 // Settings for DCF77 interface
-//#define HAS_DCF77 GPIO_NUM_14
+#define HAS_DCF77 GPIO_NUM_14
-//#define DCF77_ACTIVE_LOW 1
+#define DCF77_ACTIVE_LOW 1
 
 // Settings for external GPS chip
-//#define HAS_GPS 1 // use on board GPS
+#define HAS_GPS 1 // use on board GPS
-//#define GPS_SERIAL 9600, SERIAL_8N1, GPIO_NUM_17, GPIO_NUM_16 // UBlox NEO 6M or 7M with default configuration
+#define GPS_SERIAL 9600, SERIAL_8N1, GPIO_NUM_17, GPIO_NUM_16 // UBlox NEO 6M or 7M with default configuration
+#define GPS_INT GPIO_NUM_13
 
 // Pins for LORA chip SPI interface, reset line and interrupt lines
 #define LORA_SCK  (5) 

src/if482.cpp

@@ -82,23 +82,26 @@ not evaluated by model BU-190
 #include "if482.h"
 
 // Local logging tag
-static const char TAG[] = "main";
+static const char TAG[] = __FILE__;
 
 HardwareSerial IF482(2); // use UART #2 (note: #1 may be in use for serial GPS)
 
-// triggered by timepulse to ticker out DCF signal
+// triggered by timepulse to send IF482 signal
 void IF482_Pulse(time_t t) {
 
-  TickType_t startTime = xTaskGetTickCount();
+  static const TickType_t txDelay =
-  static const TickType_t txDelay = pdMS_TO_TICKS(IF482_PULSE_LENGTH) - tx_Ticks(HAS_IF482);
+      pdMS_TO_TICKS(IF482_PULSE_LENGTH - tx_Ticks(IF482_FRAME_SIZE, HAS_IF482));
-  vTaskDelayUntil(&startTime, txDelay);
+
-  IF482.print(IF482_Frame(t+1)); // note: if482 telegram for *next* second
+  //TickType_t startTime = xTaskGetTickCount();
+  //vTaskDelayUntil(&startTime, txDelay); // wait until moment to fire
+  vTaskDelay(txDelay); // wait until moment to fire
+  IF482.print(IF482_Frame(t + 1)); // note: if482 telegram for *next* second
 }
 
 String IRAM_ATTR IF482_Frame(time_t startTime) {
 
   time_t t = myTZ.toLocal(startTime);
-  char mon, buf[14], out[IF482_FRAME_SIZE];
+  char mon, out[IF482_FRAME_SIZE];
 
   switch (timeStatus()) { // indicates if time has been set and recently synced
   case timeSet:           // time is set and is synced
@@ -113,24 +116,12 @@ String IRAM_ATTR IF482_Frame(time_t startTime) {
   } // switch
 
   // generate IF482 telegram
-  snprintf(buf, sizeof(buf), "%02u%02u%02u%1u%02u%02u%02u", year(t) - 2000,
+  snprintf(out, sizeof(out), "O%cL%02u%02u%02u%1u%02u%02u%02u\r", mon,
-           month(t), day(t), weekday(t), hour(t), minute(t), second(t));
+           year(t) - 2000, month(t), day(t), weekday(t), hour(t), minute(t),
-  snprintf(out, sizeof(out), "O%cL%s\r", mon, buf);
+           second(t));
+
   ESP_LOGD(TAG, "IF482 = %s", out);
   return out;
 }
 
-// calculate serial tx time from IF482 serial settings
-TickType_t tx_Ticks(unsigned long baud, uint32_t config, int8_t rxPin,
-                    int8_t txPins) {
-
-  uint32_t datenbits = ((config & 0x0c) >> 2) + 5;
-  uint32_t stopbits = ((config & 0x20) >> 5) + 1;
-  uint32_t tx_delay =
-      (2 + datenbits + stopbits) * IF482_FRAME_SIZE * 1000.0 / baud;
-  // +2 ms margin for the startbit and the clock's processing time
-
-  return pdMS_TO_TICKS(round(tx_delay));
-}
-
 #endif // HAS_IF482

src/irqhandler.cpp

@@ -1,7 +1,7 @@
 #include "irqhandler.h"
 
 // Local logging tag
-static const char TAG[] = "main";
+static const char TAG[] = __FILE__;
 
 // irq handler task, handles all our application level interrupts
 void irqHandler(void *pvParameters) {
@@ -12,11 +12,10 @@ void irqHandler(void *pvParameters) {
 
   // task remains in blocked state until it is notified by an irq
   for (;;) {
-    xTaskNotifyWait(
+    xTaskNotifyWait(0x00,             // Don't clear any bits on entry
-        0x00,             // Don't clear any bits on entry
+                    ULONG_MAX,        // Clear all bits on exit
-        ULONG_MAX,        // Clear all bits on exit
+                    &InterruptStatus, // Receives the notification value
-        &InterruptStatus, // Receives the notification value
+                    portMAX_DELAY);   // wait forever
-        portMAX_DELAY);   // wait forever
 
 // button pressed?
 #ifdef HAS_BUTTON
@@ -31,8 +30,9 @@ void irqHandler(void *pvParameters) {
 #endif
 
     // are cyclic tasks due?
-    if (InterruptStatus & CYCLIC_IRQ)
+    if (InterruptStatus & CYCLIC_IRQ) {
       doHousekeeping();
+    }
 
     // is time to send the payload?
     if (InterruptStatus & SENDCOUNTER_IRQ)

src/lmic_config.h

@@ -22,7 +22,7 @@
 //#define LMIC_USE_INTERRUPTS
 
 //time sync via LoRaWAN network, is not yet supported by TTN (LoRaWAN spec v1.0.3)
-//#define LMIC_ENABLE_DeviceTimeReq 1
+#define LMIC_ENABLE_DeviceTimeReq 1
 
 // 16 μs per tick
 // LMIC requires ticks to be 15.5μs - 100 μs long

src/lorawan.cpp

@@ -358,12 +358,7 @@ void lora_send(osjob_t *job) {
                       lora_send);
 }
 
-#endif // HAS_LORA
-
 esp_err_t lora_stack_init() {
-#ifndef HAS_LORA
-  return ESP_OK; // continue main program
-#else
   assert(SEND_QUEUE_SIZE);
   LoraSendQueue = xQueueCreate(SEND_QUEUE_SIZE, sizeof(MessageBuffer_t));
   if (LoraSendQueue == 0) {
@@ -401,12 +396,10 @@ esp_err_t lora_stack_init() {
   }
 
   return ESP_OK; // continue main program
-#endif // HAS_LORA
 }
 
 void lora_enqueuedata(MessageBuffer_t *message, sendprio_t prio) {
   // enqueue message in LORA send queue
-#ifdef HAS_LORA
   BaseType_t ret;
   switch (prio) {
   case prio_high:
@@ -423,27 +416,26 @@ void lora_enqueuedata(MessageBuffer_t *message, sendprio_t prio) {
   } else {
     ESP_LOGW(TAG, "LORA sendqueue is full");
   }
-#endif
 }
 
-void lora_queuereset(void) {
+void lora_queuereset(void) { xQueueReset(LoraSendQueue); }
-#ifdef HAS_LORA
-  xQueueReset(LoraSendQueue);
-#endif
-}
 
 void lora_housekeeping(void) {
-#ifdef HAS_LORA
+  // ESP_LOGD(TAG, "loraloop %d bytes left",
-// ESP_LOGD(TAG, "loraloop %d bytes left",
+  // uxTaskGetStackHighWaterMark(LoraTask));
-// uxTaskGetStackHighWaterMark(LoraTask));
-#endif
 }
 
 void user_request_network_time_callback(void *pVoidUserUTCTime,
                                         int flagSuccess) {
-#ifdef HAS_LORA
   // Explicit conversion from void* to uint32_t* to avoid compiler errors
-  uint32_t *pUserUTCTime = (uint32_t *)pVoidUserUTCTime;
+  time_t *pUserUTCTime = (time_t *)pVoidUserUTCTime;
+
+  // A struct that will be populated by LMIC_getNetworkTimeReference.
+  // It contains the following fields:
+  //  - tLocal: the value returned by os_GetTime() when the time
+  //            request was sent to the gateway, and
+  //  - tNetwork: the seconds between the GPS epoch and the time
+  //              the gateway received the time request
   lmic_time_reference_t lmicTimeReference;
 
   if (flagSuccess != 1) {
@@ -459,7 +451,8 @@ void user_request_network_time_callback(void *pVoidUserUTCTime,
   }
 
   // Update userUTCTime, considering the difference between the GPS and UTC
-  // epoch, and the leap seconds
+  // time, and the leap seconds
+  // !!! DANGER !!! This code will expire in next year with leap second
   *pUserUTCTime = lmicTimeReference.tNetwork + 315964800;
   // Current time, in ticks
   ostime_t ticksNow = os_getTime();
@@ -467,18 +460,17 @@ void user_request_network_time_callback(void *pVoidUserUTCTime,
   ostime_t ticksRequestSent = lmicTimeReference.tLocal;
   // Add the delay between the instant the time was transmitted and
   // the current time
-  uint32_t requestDelaySec = osticks2ms(ticksNow - ticksRequestSent) / 1000;
+  time_t requestDelaySec = osticks2ms(ticksNow - ticksRequestSent) / 1000;
   *pUserUTCTime += requestDelaySec;
 
   // Update system time with time read from the network
-  if (sync_TimePulse()) {              // wait for start of next second
+  if (timeIsValid(*pUserUTCTime)) {
-    if (sync_SysTime(*pUserUTCTime)) { // do we have a valid time?
+    xSemaphoreTake(TimePulse, pdMS_TO_TICKS(1000)); // wait for pps
-#ifdef HAS_RTC
+    setTime(*pUserUTCTime + 1);
-      set_rtctime(now()); // epoch time
+    timeSource = _lora;
-#endif
+    ESP_LOGI(TAG, "Received recent time from LoRa");
-      ESP_LOGI(TAG, "LORA has set the system time");
-    }
   } else
-    ESP_LOGI(TAG, "Unable to sync system time with LORA");
+    ESP_LOGI(TAG, "Invalid time received from LoRa");
-#endif // HAS_LORA
+} // user_request_network_time_callback
-} // user_request_network_time_callback
+
+#endif // HAS_LORA

src/macsniff.cpp

@@ -7,7 +7,7 @@
 #endif
 
 // Local logging tag
-static const char TAG[] = "main";
+static const char TAG[] = __FILE__;
 
 uint16_t salt;
 

src/main.cpp

@@ -27,11 +27,11 @@ Uused tasks and timers:
 
 Task          Core  Prio  Purpose
 ====================================================================================
-clockloop     0     4     generates realtime telegrams for external clock
 ledloop       0     3     blinks LEDs
 spiloop       0     2     reads/writes data on spi interface
 IDLE          0     0     ESP32 arduino scheduler -> runs wifi sniffer
 
+clockloop     1     4     generates realtime telegrams for external clock
 looptask      1     1     arduino core -> runs the LMIC LoRa stack
 irqhandler    1     1     executes tasks triggered by hw irq, see table below
 gpsloop       1     2     reads data from GPS via serial or i2c
@@ -52,7 +52,7 @@ ESP32 hardware irq timers
 
  RTC hardware timer (if present)
 ================================
- triggers IF482 clock signal
+ triggers pps 1 sec impulse
 
 */
 
@@ -65,14 +65,14 @@ uint8_t volatile channel = 0;              // channel rotation counter
 uint16_t volatile macs_total = 0, macs_wifi = 0, macs_ble = 0,
                   batt_voltage = 0; // globals for display
 
-hw_timer_t *sendCycle = NULL, *homeCycle = NULL;
+hw_timer_t *sendCycle = NULL, *homeCycle = NULL, *clockCycle = NULL,
-#ifdef HAS_DISPLAY
+           *displaytimer = NULL;
-hw_timer_t *displaytimer = NULL;
-#endif
 
 TaskHandle_t irqHandlerTask, ClockTask;
 SemaphoreHandle_t I2Caccess, TimePulse;
 bool volatile TimePulseTick = false;
+time_t userUTCTime = 0;
+timesource_t timeSource = _unsynced;
 
 // container holding unique MAC address hashes with Memory Alloctor using PSRAM,
 // if present
@@ -81,13 +81,13 @@ std::set<uint16_t, std::less<uint16_t>, Mallocator<uint16_t>> macs;
 // initialize payload encoder
 PayloadConvert payload(PAYLOAD_BUFFER_SIZE);
 
-// set Time Zone, fetch user setting from paxcounter.conf
+// set Time Zone for user setting from paxcounter.conf
 TimeChangeRule myDST = DAYLIGHT_TIME;
 TimeChangeRule mySTD = STANDARD_TIME;
 Timezone myTZ(myDST, mySTD);
 
 // local Tag for logging
-static const char TAG[] = "main";
+static const char TAG[] = __FILE__;
 
 void setup() {
 
@@ -284,14 +284,14 @@ void setup() {
 // initialize LoRa
 #ifdef HAS_LORA
   strcat_P(features, " LORA");
-#endif
   assert(lora_stack_init() == ESP_OK);
+#endif
 
 // initialize SPI
 #ifdef HAS_SPI
   strcat_P(features, " SPI");
-#endif
   assert(spi_init() == ESP_OK);
+#endif
 
 #ifdef VENDORFILTER
   strcat_P(features, " OUIFLT");
@@ -358,12 +358,10 @@ void setup() {
 #endif
 #endif
 
-  // start pps timepulse
+  // start pps timepulse and timekeepr
-  ESP_LOGI(TAG, "Starting timepulse...");
+  ESP_LOGI(TAG, "Starting Timekeeper...");
-  if (timepulse_init()) // setup timepulse
+  assert(timepulse_init()); // setup timepulse
-    timepulse_start();  // start pulse
+  timepulse_start();
-  else
-    ESP_LOGE(TAG, "No timepulse, systime will not be synced!");
 
   // start wifi in monitor mode and start channel rotation timer
   ESP_LOGI(TAG, "Starting Wifi...");
@@ -416,30 +414,9 @@ void setup() {
 #endif
 #endif // HAS_BUTTON
 
-#ifdef HAS_GPS
+  // set time source
-  // sync systime on next timepulse
+  setSyncInterval(TIME_SYNC_INTERVAL * 60);
-  ESP_LOGI(TAG, "GPS is setting system time");
+  setSyncProvider(&timeProvider);
-  if (sync_SysTime(get_gpstime())) {
-    //setSyncProvider(get_gpstime); // reset sync cycle on top of second
-    //setSyncInterval(TIME_SYNC_INTERVAL_GPS * 60);
-    // calibrate RTC
-#ifdef HAS_RTC
-    set_rtctime(now()); // epoch time
-#endif
-  } else
-    ESP_LOGI(TAG, "Unable to sync system time with GPS");
-#endif // HAS_GPS
-
-    // initialize systime from timesource
-#ifdef HAS_RTC
-  // sync systime on next timepulse
-  ESP_LOGI(TAG, "RTC is setting system time");
-  if (sync_SysTime(get_rtctime())) {
-    //setSyncProvider(get_rtctime); // reset sync cycle on top of second
-    //setSyncInterval(TIME_SYNC_INTERVAL_RTC * 60);
-  } else
-    ESP_LOGI(TAG, "Unable to sync system time with RTC");
-#endif // HAS_RTC
 
 #if defined HAS_IF482 || defined HAS_DCF77
   ESP_LOGI(TAG, "Starting Clock Controller...");

src/ota.cpp

@@ -31,7 +31,7 @@ int volatile contentLength = 0;
 bool volatile isValidContentType = false;
 
 // Local logging tag
-static const char TAG[] = "main";
+static const char TAG[] = __FILE__;
 
 // helper function to extract header value from header
 inline String getHeaderValue(String header, String headerName) {

src/paxcounter.conf

@@ -11,7 +11,7 @@
 
 // Payload send cycle and encoding
 #define SEND_SECS                       30      // payload send cycle [seconds/2] -> 60 sec.
-#define PAYLOAD_ENCODER                 2       // payload encoder: 1=Plain, 2=Packed, 3=CayenneLPP dynamic, 4=CayenneLPP packed
+#define PAYLOAD_ENCODER                 2       // payload encoder: 1=Plain, 2=Packed, 3=Cayenne LPP dynamic, 4=Cayenne LPP packed
 
 // Set this to include BLE counting and vendor filter functions
 #define VENDORFILTER                    1       // comment out if you want to count things, not people
@@ -49,28 +49,12 @@
 #define MAXLORARETRY                    500     // maximum count of TX retries if LoRa busy
 #define SEND_QUEUE_SIZE                 10       // maximum number of messages in payload send queue [1 = no queue]
 
-// Ports on which the device sends and listenes on LoRaWAN and SPI
+// Hardware settings
-#define COUNTERPORT                     1       // Port on which device sends counts
-#define RCMDPORT                        2       // Port on which device listenes for remote commands
-#define STATUSPORT                      2       // Port on which device sends remote command results
-#define CONFIGPORT                      3       // Port on which device sends config query results
-#define GPSPORT                         4       // Port on which device sends gps data
-#define BUTTONPORT                      5       // Port on which device sends button pressed signal
-#define LPP1PORT                        1       // Port for Cayenne LPP 1.0 dynamic sensor encoding
-#define LPP2PORT                        2       // Port for Cayenne LPP 2.0 packed sensor encoding
-#define BEACONPORT                      6       // Port on which device sends beacon alarms
-#define BMEPORT                         7       // Port on which device sends BME680 sensor data
-#define BATTPORT                        8       // Port on which device sends battery voltage data
-#define SENSOR1PORT                     10      // Port on which device sends User sensor #1 data
-#define SENSOR2PORT                     11      // Port on which device sends User sensor #2 data
-#define SENSOR3PORT                     12      // Port on which device sends User sensor #3 data
-
-// Some hardware settings
 #define RGBLUMINOSITY                   30      // RGB LED luminosity [default = 30%]
 #define DISPLAYREFRESH_MS               40      // OLED refresh cycle in ms [default = 40] -> 1000/40 = 25 frames per second
 #define HOMECYCLE                       30      // house keeping cycle in seconds [default = 30 secs]
 
-// Settings for BME680 environmental sensor (if present)
+// Settings for BME680 environmental sensor
 #define BME_TEMP_OFFSET                 5.0f    // Offset sensor on chip temp <-> ambient temp [default = 5°C]
 #define STATE_SAVE_PERIOD               UINT32_C(360 * 60 * 1000) // update every 360 minutes = 4 times a day
 
@@ -81,14 +65,37 @@
 #define OTA_MIN_BATT                    3600    // minimum battery level for OTA [millivolt]
 #define RESPONSE_TIMEOUT_MS             60000   // firmware binary server connection timeout [milliseconds]
 
-// settings for syncing time of node and external time sources
+// settings for syncing time of node with external time source
-#define TIME_SYNC_INTERVAL_GPS          5       // sync time each .. minutes from GPS [default = 5], comment out means off          
+#define TIME_SYNC_INTERVAL              2      // sync time attempt each .. minutes from time source (GPS/LORA/RTC) [default = 60], comment out means off
-#define TIME_SYNC_INTERVAL_RTC          60      // sync time each .. minutes from RTC [default = 60], comment out means off          
+//#define TIME_SYNC_LORA                  1       // use LORA network as time source, comment out means off [default = off]
-//#define TIME_SYNC_INTERVAL_LORA       60      // sync time each .. minutes from LORA network [default = 60], comment out means off
 
 // time zone, see https://github.com/JChristensen/Timezone/blob/master/examples/WorldClock/WorldClock.ino
 #define DAYLIGHT_TIME                   {"CEST", Last, Sun, Mar, 2, 120}     // Central European Summer Time
 #define STANDARD_TIME                   {"CET ", Last, Sun, Oct, 3, 60}      // Central European Standard Time
 
-// LMIC settings
+// Ports on which the device sends and listenes on LoRaWAN and SPI
-// moved to src/lmic_config.h
+#define COUNTERPORT                     1       // counts
+#define RCMDPORT                        2       // remote commands
+#define STATUSPORT                      2       // remote command results
+#define CONFIGPORT                      3       // config query results
+#define GPSPORT                         4       // gps
+#define BUTTONPORT                      5       // button pressed signal
+#define BEACONPORT                      6       // beacon alarms
+#define BMEPORT                         7       // BME680 sensor
+#define BATTPORT                        8       // battery voltage
+#define TIMEPORT                        9       // time
+#define SENSOR1PORT                     10      // user sensor #1
+#define SENSOR2PORT                     11      // user sensor #2
+#define SENSOR3PORT                     12      // user sensor #3
+
+// Cayenne LPP Ports, see https://community.mydevices.com/t/cayenne-lpp-2-0/7510
+#define CAYENNE_LPP1                    1       // dynamic sensor payload (LPP 1.0)
+#define CAYENNE_LPP2                    2       // packed sensor payload (LPP 2.0)
+#define CAYENNE_GPS                     3       // full scale GPS payload
+#define CAYENNE_ACTUATOR                10	    // actuator commands
+#define CAYENNE_DEVICECONFIG            11	    // device period configuration
+#define CAYENNE_SENSORREAD              13	    // sensor period configuration
+#define CAYENNE_SENSORENABLE            14	    // sensor enable configuration
+
+// LMIC settings 
+// -> in src/lmic_config.h

src/payload.cpp

@@ -126,6 +126,14 @@ void PayloadConvert::addButton(uint8_t value) {
 #endif
 }
 
+void PayloadConvert::addTime(time_t value) {
+  uint32_t time = (uint32_t)value;
+  buffer[cursor++] = (byte)((time & 0xFF000000) >> 24);
+  buffer[cursor++] = (byte)((time & 0x00FF0000) >> 16);
+  buffer[cursor++] = (byte)((time & 0x0000FF00) >> 8);
+  buffer[cursor++] = (byte)((time & 0x000000FF));
+}
+
 /* ---------------- packed format with LoRa serialization Encoder ----------
  */
 // derived from
@@ -133,7 +141,9 @@ void PayloadConvert::addButton(uint8_t value) {
 
 #elif PAYLOAD_ENCODER == 2
 
-void PayloadConvert::addCount(uint16_t value, uint8_t snifftype) { writeUint16(value); }
+void PayloadConvert::addCount(uint16_t value, uint8_t snifftype) {
+  writeUint16(value);
+}
 
 void PayloadConvert::addAlarm(int8_t rssi, uint8_t msg) {
   writeUint8(rssi);
@@ -208,6 +218,11 @@ void PayloadConvert::addButton(uint8_t value) {
 #endif
 }
 
+void PayloadConvert::addTime(time_t value) {
+  uint32_t time = (uint32_t)value;
+  writeUint32(time);
+}
+
 void PayloadConvert::intToBytes(uint8_t pos, int32_t i, uint8_t byteSize) {
   for (uint8_t x = 0; x < byteSize; x++) {
     buffer[x + pos] = (byte)(i >> (x * 8));
@@ -275,14 +290,16 @@ void PayloadConvert::writeBitmap(bool a, bool b, bool c, bool d, bool e, bool f,
 }
 
 /* ---------------- Cayenne LPP 2.0 format ---------- */
-// see specs http://community.mydevices.com/t/cayenne-lpp-2-0/7510
+// see specs 
+// http://community.mydevices.com/t/cayenne-lpp-2-0/7510 (LPP 2.0)
+// https://github.com/myDevicesIoT/cayenne-docs/blob/master/docs/LORA.md (LPP 1.0)
 // PAYLOAD_ENCODER == 3 -> Dynamic Sensor Payload, using channels -> FPort 1
 // PAYLOAD_ENCODER == 4 -> Packed Sensor Payload, not using channels -> FPort 2
 
 #elif (PAYLOAD_ENCODER == 3 || PAYLOAD_ENCODER == 4)
 
 void PayloadConvert::addCount(uint16_t value, uint8_t snifftype) {
-  switch(snifftype) {
+  switch (snifftype) {
   case MAC_SNIFF_WIFI:
 #if (PAYLOAD_ENCODER == 3)
     buffer[cursor++] = LPP_COUNT_WIFI_CHANNEL;
@@ -436,6 +453,24 @@ void PayloadConvert::addButton(uint8_t value) {
 #endif // HAS_BUTTON
 }
 
+void PayloadConvert::addTime(time_t value) {
+#if (PAYLOAD_ENCODER == 4)
+  uint32_t t = (uint32_t)value;
+  uint32_t tx_period = (uint32_t)SEND_SECS * 2;
+  buffer[cursor++] = 0x03; // set config mask to UTCTime + TXPeriod
+  // UTCTime in seconds
+  buffer[cursor++] = (byte)((t & 0xFF000000) >> 24);
+  buffer[cursor++] = (byte)((t & 0x00FF0000) >> 16);
+  buffer[cursor++] = (byte)((t & 0x0000FF00) >> 8);
+  buffer[cursor++] = (byte)((t & 0x000000FF));
+  // TXPeriod in seconds
+  buffer[cursor++] = (byte)((tx_period & 0xFF000000) >> 24);
+  buffer[cursor++] = (byte)((tx_period & 0x00FF0000) >> 16);
+  buffer[cursor++] = (byte)((tx_period & 0x0000FF00) >> 8);
+  buffer[cursor++] = (byte)((tx_period & 0x000000FF));
+#endif
+}
+
 #else
 #error No valid payload converter defined!
 #endif

src/rcommand.cpp

@@ -3,7 +3,7 @@
 #include "rcommand.h"
 
 // Local logging tag
-static const char TAG[] = "main";
+static const char TAG[] = __FILE__;
 
 // helper function
 void do_reset() {
@@ -68,7 +68,7 @@ void set_sendcycle(uint8_t val[]) {
 void set_wifichancycle(uint8_t val[]) {
   cfg.wifichancycle = val[0];
   // update Wifi channel rotation timer period
-  xTimerChangePeriod(WifiChanTimer, pdMS_TO_TICKS(cfg.wifichancycle * 10), 100 );
+  xTimerChangePeriod(WifiChanTimer, pdMS_TO_TICKS(cfg.wifichancycle * 10), 100);
 
   ESP_LOGI(TAG,
            "Remote command: set Wifi channel switch interval to %.1f seconds",
@@ -244,9 +244,8 @@ void get_status(uint8_t val[]) {
   uint16_t voltage = 0;
 #endif
   payload.reset();
-  payload.addStatus(voltage, uptime() / 1000, temperatureRead(),
+  payload.addStatus(voltage, uptime() / 1000, temperatureRead(), getFreeRAM(),
-                    getFreeRAM(), rtc_get_reset_reason(0),
+                    rtc_get_reset_reason(0), rtc_get_reset_reason(1));
-                    rtc_get_reset_reason(1));
   SendPayload(STATUSPORT, prio_high);
 };
 
@@ -273,6 +272,13 @@ void get_bme(uint8_t val[]) {
 #endif
 };
 
+void get_time(uint8_t val[]) {
+  ESP_LOGI(TAG, "Remote command: get time");
+  payload.reset();
+  payload.addTime(now());
+  SendPayload(TIMEPORT, prio_high);
+};
+
 // assign previously defined functions to set of numeric remote commands
 // format: opcode, function, #bytes params,
 // flag (true = do make settings persistent / false = don't)
@@ -289,7 +295,7 @@ cmd_t table[] = {
     {0x11, set_monitor, 1, true},       {0x12, set_beacon, 7, false},
     {0x13, set_sensor, 2, true},        {0x80, get_config, 0, false},
     {0x81, get_status, 0, false},       {0x84, get_gps, 0, false},
-    {0x85, get_bme, 0, false},
+    {0x85, get_bme, 0, false},          {0x86, get_time, 0, false},
 };
 
 const uint8_t cmdtablesize =

src/rtctime.cpp

@@ -1,214 +1,81 @@
 #include "rtctime.h"
 
 // Local logging tag
-static const char TAG[] = "main";
+static const char TAG[] = __FILE__;
-
-hw_timer_t *clockCycle = NULL;
-
-// helper function to setup a pulse per second for time synchronisation
-int timepulse_init() {
-
-// use time pulse from GPS as time base with fixed 1Hz frequency
-#ifdef GPS_INT
-
-  // setup external interupt for active low RTC INT pin
-  pinMode(GPS_INT, INPUT_PULLDOWN);
-  // setup external rtc 1Hz clock as pulse per second clock
-  ESP_LOGI(TAG, "Time base: external (GPS)");
-  return 1; // success
-
-// use pulse from on board RTC chip as time base with fixed frequency
-#elif defined RTC_INT
-
-  // setup external interupt for active low RTC INT pin
-  pinMode(RTC_INT, INPUT_PULLUP);
-
-  // setup external rtc 1Hz clock as pulse per second clock
-  if (I2C_MUTEX_LOCK()) {
-    Rtc.SetSquareWavePinClockFrequency(DS3231SquareWaveClock_1Hz);
-    Rtc.SetSquareWavePin(DS3231SquareWavePin_ModeClock);
-    I2C_MUTEX_UNLOCK();
-    ESP_LOGI(TAG, "Time base: external (RTC)");
-    return 1; // success
-  } else {
-    ESP_LOGE(TAG, "I2c bus busy - RTC initialization error");
-    return 0; // failure
-  }
-  return 1; // success
-
-#else
-  // use ESP32 hardware timer as time base with adjustable frequency
-  clockCycle = timerBegin(1, 8000, true); // set 80 MHz prescaler to 1/10000 sec
-  timerAlarmWrite(clockCycle, 10000, true); // 1000ms
-  ESP_LOGI(TAG, "Time base: internal (ESP32 hardware timer)");
-  return 1; // success
-
-#endif
-} // timepulse_init
-
-void timepulse_start(void) {
-#ifdef GPS_INT // start external clock gps pps line
-  attachInterrupt(digitalPinToInterrupt(GPS_INT), CLOCKIRQ, RISING);
-#elif defined RTC_INT // start external clock rtc
-  attachInterrupt(digitalPinToInterrupt(RTC_INT), CLOCKIRQ, FALLING);
-#else                 // start internal clock esp32 hardware timer
-  timerAttachInterrupt(clockCycle, &CLOCKIRQ, true);
-  timerAlarmEnable(clockCycle);
-#endif
-}
-
-// interrupt service routine triggered by either pps or esp32 hardware timer
-void IRAM_ATTR CLOCKIRQ(void) {
-  if (ClockTask != NULL)
-    xTaskNotifyFromISR(ClockTask, xTaskGetTickCountFromISR(), eSetBits, NULL);
-#if defined GPS_INT || defined RTC_INT
-  xSemaphoreGiveFromISR(TimePulse, NULL);
-  TimePulseTick = !TimePulseTick; // flip ticker
-#endif
-  portYIELD_FROM_ISR();
-}
-
-// helper function to sync systime on start of next second
-int sync_SysTime(time_t t) {
-  if (sync_TimePulse() && (t)) { // wait for start of next second by timepulse
-    setTime(t + 1);
-    ESP_LOGD(TAG, "Systime synced on second");
-    return 1; // success
-  } else
-    return 0; // failure
-}
-
-int sync_SysTime(uint32_t t) { // t is epoch seconds starting 1.1.1970
-  return sync_SysTime(static_cast<time_t>(t));
-}
-
-// helper function to sync moment on timepulse
-int sync_TimePulse(void) {
-  // sync on top of next second by timepulse
-  if (xSemaphoreTake(TimePulse, pdMS_TO_TICKS(1100)) == pdTRUE) {
-    return 1;
-  } // success
-  else
-    ESP_LOGW(TAG, "Missing timepulse, time not synced");
-  return 0; // failure
-}
-
-// helper function to fetch current second from most precise time source
-time_t best_time(void) {
-
-  time_t t;
-
-#ifdef HAS_GPS // gps is our primary time source if present
-  t = get_gpstime();
-  if (t) // did we get a valid time?
-    return t;
-#endif
-
-  /*
-  // Reading RTC time from chip take too long on i2c bus, causes jitter
-  #ifdef HAS_RTC // rtc is our secondary time source if present
-    t = get_rtctime();
-    if (t)
-      return t;
-  #endif
-  */
-
-  // else we use systime as fallback source
-  return now();
-}
 
 #ifdef HAS_RTC // we have hardware RTC
 
 RtcDS3231<TwoWire> Rtc(Wire); // RTC hardware i2c interface
 
 // initialize RTC
-int rtc_init(void) {
+uint8_t rtc_init(void) {
 
-  // return = 0 -> error / return = 1 -> success
+  if (I2C_MUTEX_LOCK()) { // block i2c bus access
-
-  // block i2c bus access
-  if (I2C_MUTEX_LOCK()) {
 
     Wire.begin(HAS_RTC);
     Rtc.Begin();
 
-    RtcDateTime compiled = RtcDateTime(__DATE__, __TIME__);
+    // configure RTC chip
-
+    Rtc.Enable32kHzPin(false);
-    if (!Rtc.IsDateTimeValid()) {
+    Rtc.SetSquareWavePin(DS3231SquareWavePin_ModeNone);
-      ESP_LOGW(TAG,
-               "RTC has no valid RTC date/time, setting to compilation date");
-      Rtc.SetDateTime(compiled);
-    }
 
     if (!Rtc.GetIsRunning()) {
       ESP_LOGI(TAG, "RTC not running, starting now");
       Rtc.SetIsRunning(true);
     }
 
-    RtcDateTime now = Rtc.GetDateTime();
+    // If you want to initialize a fresh RTC to compiled time, use this code
+    /*
+        RtcDateTime tt = Rtc.GetDateTime();
+        time_t t = tt.Epoch32Time(); // sec2000 -> epoch
 
-    if (now < compiled) {
+        if (!Rtc.IsDateTimeValid() || !timeIsValid(t)) {
-      ESP_LOGI(TAG, "RTC date/time is older than compilation date, updating");
+          ESP_LOGW(TAG, "RTC has no recent time, setting to compilation date");
-      Rtc.SetDateTime(compiled);
+          Rtc.SetDateTime(
-    }
+              RtcDateTime(compiledUTC() - SECS_YR_2000)); // epoch -> sec2000
-
+        }
-    // configure RTC chip
+    */
-    Rtc.Enable32kHzPin(false);
-    Rtc.SetSquareWavePin(DS3231SquareWavePin_ModeNone);
 
+    I2C_MUTEX_UNLOCK(); // release i2c bus access
+    ESP_LOGI(TAG, "RTC initialized");
+    return 1; // success
   } else {
-    ESP_LOGE(TAG, "I2c bus busy - RTC initialization error");
+    ESP_LOGE(TAG, "RTC initialization error, I2C bus busy");
-    goto error;
+    return 0; // failure
   }
 
-  I2C_MUTEX_UNLOCK(); // release i2c bus access
-  ESP_LOGI(TAG, "RTC initialized");
-  return 1;
-
-error:
-  I2C_MUTEX_UNLOCK(); // release i2c bus access
-  return 0;
-
 } // rtc_init()
 
-int set_rtctime(time_t t) { // t is seconds epoch time starting 1.1.1970
+uint8_t set_rtctime(time_t t) { // t is UTC in seconds epoch time
   if (I2C_MUTEX_LOCK()) {
-    Rtc.SetDateTime(RtcDateTime(t));
+    Rtc.SetDateTime(RtcDateTime(t - SECS_YR_2000)); // epoch -> sec2000
-    I2C_MUTEX_UNLOCK(); // release i2c bus access
+    I2C_MUTEX_UNLOCK();
-    ESP_LOGI(TAG, "RTC calibrated");
+    ESP_LOGI(TAG, "RTC time synced");
     return 1; // success
-  }
+  } else {
-  ESP_LOGE(TAG, "RTC set time failure");
+    ESP_LOGE(TAG, "RTC set time failure");
-  return 0; // failure
+    return 0;
+  } // failure
 } // set_rtctime()
 
-int set_rtctime(uint32_t t) { // t is epoch seconds starting 1.1.1970
-  return set_rtctime(static_cast<time_t>(t));
-  // set_rtctime()
-}
-
 time_t get_rtctime(void) {
-  // !! never call now() or delay in this function, this would break this
+  time_t t = 0;
-  // function to be used as SyncProvider for Time.h
-  time_t t = 0; // 0 effects calling SyncProvider() to not set time
-  // block i2c bus access
   if (I2C_MUTEX_LOCK()) {
-    if (Rtc.IsDateTimeValid()) {
+    if (Rtc.IsDateTimeValid() && Rtc.GetIsRunning()) {
       RtcDateTime tt = Rtc.GetDateTime();
-      t = tt.Epoch32Time();
+      t = tt.Epoch32Time(); // sec2000 -> epoch
     }
-    I2C_MUTEX_UNLOCK(); // release i2c bus access
+    I2C_MUTEX_UNLOCK();
   }
-  return t;
+  return timeIsValid(t);
 } // get_rtctime()
 
 float get_rtctemp(void) {
-  // block i2c bus access
   if (I2C_MUTEX_LOCK()) {
     RtcTemperature temp = Rtc.GetTemperature();
-    I2C_MUTEX_UNLOCK(); // release i2c bus access
+    I2C_MUTEX_UNLOCK();
     return temp.AsFloatDegC();
-  } // while
+  }
   return 0;
 } // get_rtctemp()
 

src/senddata.cpp

@@ -8,24 +8,39 @@ void SendPayload(uint8_t port, sendprio_t prio) {
 
   SendBuffer.MessageSize = payload.getSize();
   switch (PAYLOAD_ENCODER) {
-  case 1:
+  case 1: // plain -> no mapping
-  case 2:
+  case 2: // packed -> no mapping
     SendBuffer.MessagePort = port;
     break;
-  case 3:
+  case 3: // Cayenne LPP dynamic -> all payload goes out on same port
-    SendBuffer.MessagePort = LPP1PORT;
+    SendBuffer.MessagePort = CAYENNE_LPP1;
     break;
-  case 4:
+  case 4: // Cayenne LPP packed -> we need to map some paxcounter ports
-    SendBuffer.MessagePort = LPP2PORT;
+    SendBuffer.MessagePort = CAYENNE_LPP2;
+    switch (SendBuffer.MessagePort) {
+    case COUNTERPORT:
+      SendBuffer.MessagePort = CAYENNE_LPP2;
+      break;
+    case RCMDPORT:
+      SendBuffer.MessagePort = CAYENNE_ACTUATOR;
+      break;
+    case TIMEPORT:
+      SendBuffer.MessagePort = CAYENNE_DEVICECONFIG;
+      break;
+    }
     break;
   default:
     SendBuffer.MessagePort = port;
   }
   memcpy(SendBuffer.Message, payload.getBuffer(), payload.getSize());
 
-  // enqueue message in device's send queues
+// enqueue message in device's send queues
+#ifdef HAS_LORA
   lora_enqueuedata(&SendBuffer, prio);
+#endif
+#ifdef HAS_SPI
   spi_enqueuedata(&SendBuffer, prio);
+#endif
 
 } // SendPayload
 
@@ -119,6 +134,10 @@ void sendCounter() {
 } // sendCounter()
 
 void flushQueues() {
+#ifdef HAS_LORA
   lora_queuereset();
+#endif
+#ifdef HAS_SPI
   spi_queuereset();
+#endif
 }

src/sensor.cpp

@@ -2,7 +2,7 @@
 #include "globals.h"
 
 // Local logging tag
-static const char TAG[] = "main";
+static const char TAG[] = __FILE__;
 
 #define SENSORBUFFER                                                           \
   10 // max. size of user sensor data buffer in bytes [default=20]

src/spislave.cpp

@@ -22,6 +22,8 @@ licenses. Refer to LICENSE.txt file in repository for more details.
 
 */
 
+#ifdef HAS_SPI
+
 #include "spislave.h"
 
 #include <driver/spi_slave.h>
@@ -102,9 +104,6 @@ void spi_slave_task(void *param) {
 }
 
 esp_err_t spi_init() {
-#ifndef HAS_SPI
-  return ESP_OK;
-#else
   assert(SEND_QUEUE_SIZE);
   SPISendQueue = xQueueCreate(SEND_QUEUE_SIZE, sizeof(MessageBuffer_t));
   if (SPISendQueue == 0) {
@@ -146,13 +145,10 @@ esp_err_t spi_init() {
   }
 
   return ret;
-
-#endif
 }
 
 void spi_enqueuedata(MessageBuffer_t *message, sendprio_t prio) {
   // enqueue message in SPI send queue
-#ifdef HAS_SPI
   BaseType_t ret;
   switch (prio) {
   case prio_high:
@@ -170,17 +166,12 @@ void spi_enqueuedata(MessageBuffer_t *message, sendprio_t prio) {
   } else {
     ESP_LOGW(TAG, "SPI sendqueue is full");
   }
-#endif
 }
 
-void spi_queuereset(void) {
+void spi_queuereset(void) { xQueueReset(SPISendQueue); }
-#ifdef HAS_SPI
-  xQueueReset(SPISendQueue);
-#endif
-}
 
 void spi_housekeeping(void) {
-#ifdef HAS_SPI
   ESP_LOGD(TAG, "spiloop %d bytes left", uxTaskGetStackHighWaterMark(spiTask));
-#endif
 }
+
+#endif // HAS_SPI

src/timekeeper.cpp

@@ -0,0 +1,231 @@
+#include "timekeeper.h"
+
+// Local logging tag
+static const char TAG[] = __FILE__;
+
+// symbol to display current time source
+const char timeSetSymbols[] = {'G', 'R', 'L', '?'};
+
+getExternalTime TimeSourcePtr; // pointer to time source function
+
+time_t timeProvider(void) {
+
+  ESP_LOGD(TAG, "time synched");
+
+  time_t t = 0;
+
+#ifdef HAS_GPS
+  // xSemaphoreTake(TimePulse, pdMS_TO_TICKS(1100)); // wait for pps
+  t = get_gpstime(); // fetch recent time from last NEMA record
+  if (t) {
+    // t++; // last NMEA record concerns past second, so we add one
+#ifdef HAS_RTC
+    set_rtctime(t); // calibrate RTC
+#endif
+    timeSource = _gps;
+    return t;
+  }
+#endif
+
+// no GPS -> fallback to RTC time while trying lora sync
+#ifdef HAS_RTC
+  t = get_rtctime();
+  if (t) {
+    timeSource = _rtc;
+  }
+#endif
+
+// kick off asychron lora sync if we have
+#if defined HAS_LORA && defined TIME_SYNC_LORA
+  LMIC_requestNetworkTime(user_request_network_time_callback, &userUTCTime);
+#endif
+
+  if (!t)
+    timeSource = _unsynced;
+
+  return t;
+
+} // timeProvider()
+
+// helper function to setup a pulse per second for time synchronisation
+uint8_t timepulse_init() {
+
+// use time pulse from GPS as time base with fixed 1Hz frequency
+#ifdef GPS_INT
+
+  // setup external interupt pin for rising edge GPS INT
+  pinMode(GPS_INT, INPUT_PULLDOWN);
+  // setup external rtc 1Hz clock as pulse per second clock
+  ESP_LOGI(TAG, "Timepulse: external (GPS)");
+  return 1; // success
+
+// use pulse from on board RTC chip as time base with fixed frequency
+#elif defined RTC_INT
+
+  // setup external interupt pin for falling edge RTC INT
+  pinMode(RTC_INT, INPUT_PULLUP);
+
+  // setup external rtc 1Hz clock as pulse per second clock
+  if (I2C_MUTEX_LOCK()) {
+    Rtc.SetSquareWavePinClockFrequency(DS3231SquareWaveClock_1Hz);
+    Rtc.SetSquareWavePin(DS3231SquareWavePin_ModeClock);
+    I2C_MUTEX_UNLOCK();
+    ESP_LOGI(TAG, "Timepulse: external (RTC)");
+    return 1; // success
+  } else {
+    ESP_LOGE(TAG, "RTC initialization error, I2C bus busy");
+    return 0; // failure
+  }
+  return 1; // success
+
+#else
+  // use ESP32 hardware timer as time base with adjustable frequency
+  clockCycle = timerBegin(1, 8000, true); // set 80 MHz prescaler to 1/10000 sec
+  timerAlarmWrite(clockCycle, 10000, true); // 1000ms
+  ESP_LOGI(TAG, "Timepulse: internal (ESP32 hardware timer)");
+  return 1; // success
+
+#endif
+} // timepulse_init
+
+void timepulse_start(void) {
+#ifdef GPS_INT // start external clock gps pps line
+  attachInterrupt(digitalPinToInterrupt(GPS_INT), CLOCKIRQ, RISING);
+#elif defined RTC_INT // start external clock rtc
+  attachInterrupt(digitalPinToInterrupt(RTC_INT), CLOCKIRQ, FALLING);
+#else                 // start internal clock esp32 hardware timer
+  timerAttachInterrupt(clockCycle, &CLOCKIRQ, true);
+  timerAlarmEnable(clockCycle);
+#endif
+}
+
+// interrupt service routine triggered by either pps or esp32 hardware timer
+void IRAM_ATTR CLOCKIRQ(void) {
+
+  SyncToPPS(); // calibrate systime from Time.h
+
+  if (ClockTask != NULL)
+    xTaskNotifyFromISR(ClockTask, uint32_t(now()), eSetBits, NULL);
+
+#if defined GPS_INT || defined RTC_INT
+  xSemaphoreGiveFromISR(TimePulse, NULL);
+  TimePulseTick = !TimePulseTick; // flip ticker
+#endif
+
+  portYIELD_FROM_ISR();
+}
+
+// helper function to check plausibility of a time
+time_t timeIsValid(time_t const t) {
+  // is it a time in the past? we use compile date to guess
+  return (t >= compiledUTC() ? t : 0);
+}
+
+// helper function to convert compile time to UTC time
+time_t compiledUTC(void) {
+  static time_t t = myTZ.toUTC(RtcDateTime(__DATE__, __TIME__).Epoch32Time());
+  return t;
+}
+
+// helper function to convert gps date/time into time_t
+time_t tmConvert(uint16_t YYYY, uint8_t MM, uint8_t DD, uint8_t hh, uint8_t mm,
+                 uint8_t ss) {
+  tmElements_t tm;
+  tm.Year = CalendarYrToTm(YYYY); // year offset from 1970 in time.h
+  tm.Month = MM;
+  tm.Day = DD;
+  tm.Hour = hh;
+  tm.Minute = mm;
+  tm.Second = ss;
+  return makeTime(tm);
+}
+
+// helper function to calculate serial transmit time
+TickType_t tx_Ticks(uint32_t framesize, unsigned long baud, uint32_t config,
+                    int8_t rxPin, int8_t txPins) {
+
+  uint32_t databits = ((config & 0x0c) >> 2) + 5;
+  uint32_t stopbits = ((config & 0x20) >> 5) + 1;
+  uint32_t txTime = (databits + stopbits + 2) * framesize * 1000.0 / baud;
+  // +1 ms margin for the startbit +1 ms for pending processing time
+
+  return round(txTime);
+}
+
+#if defined HAS_IF482 || defined HAS_DCF77
+
+#if defined HAS_DCF77 && defined HAS_IF482
+#error You must define at most one of IF482 or DCF77!
+#endif
+
+void clock_init(void) {
+
+// setup clock output interface
+#ifdef HAS_IF482
+  IF482.begin(HAS_IF482);
+#elif defined HAS_DCF77
+  pinMode(HAS_DCF77, OUTPUT);
+#endif
+
+  xTaskCreatePinnedToCore(clock_loop,  // task function
+                          "clockloop", // name of task
+                          2048,        // stack size of task
+                          (void *)1,   // task parameter
+                          4,           // priority of the task
+                          &ClockTask,  // task handle
+                          1);          // CPU core
+
+  assert(ClockTask); // has clock task started?
+} // clock_init
+
+void clock_loop(void *pvParameters) { // ClockTask
+
+  configASSERT(((uint32_t)pvParameters) == 1); // FreeRTOS check
+
+  TickType_t wakeTime;
+  uint32_t printtime;
+  time_t t;
+
+#define t1(t) (t + DCF77_FRAME_SIZE + 1) // future minute for next DCF77 frame
+#define t2(t) (t + 1) // future second after sync with 1pps trigger
+
+  // preload first DCF frame before start
+#ifdef HAS_DCF77
+  uint8_t *DCFpulse; // pointer on array with DCF pulse bits
+  DCFpulse = DCF77_Frame(t1(now()));
+#endif
+
+  // output time telegram for second following sec beginning with timepulse
+  for (;;) {
+    xTaskNotifyWait(0x00, ULONG_MAX, &printtime,
+                    portMAX_DELAY); // wait for timepulse
+
+    // no confident time -> suppress clock output
+    if (timeStatus() == timeNotSet)
+      continue;
+
+    t = time_t(printtime);
+
+#if defined HAS_IF482
+
+    // IF482_Pulse(t2(t)); // next second
+    IF482_Pulse(t); // next second
+
+#elif defined HAS_DCF77
+
+    if (second(t) == DCF77_FRAME_SIZE - 1) // is it time to load new frame?
+      DCFpulse = DCF77_Frame(t1(t));       // generate next frame
+
+    if (DCFpulse[DCF77_FRAME_SIZE] !=
+        minute(t1(t))) // have recent frame? (timepulses could be missed!)
+      continue;
+    else
+      // DCF77_Pulse(t2(t), DCFpulse); // then output next second of this frame
+      DCF77_Pulse(t, DCFpulse); // then output next second of this frame
+
+#endif
+
+  } // for
+} // clock_loop()
+
+#endif // HAS_IF482 || defined HAS_DCF77