new rcmd load/save config
This commit is contained in:
parent
a25236ea7a
commit
690c843ccf
10
README.md
10
README.md
@ -366,7 +366,7 @@ Hereafter described is the default *plain* format, which uses MSB bit numbering.
|
||||
|
||||
The device listenes for remote control commands on LoRaWAN Port 2. Multiple commands per downlink are possible by concatenating them, but must not exceed a maximum of 10 bytes per downlink.
|
||||
|
||||
Note: all settings are stored in NVRAM and will be reloaded when device starts.
|
||||
Note: settings can be stored in NVRAM to make them persistant (reloaded during device startup / restart). To store settings, use command 0x20.
|
||||
|
||||
Send for example `8386` as Downlink on Port 2 to get battery status and time/date from the device.
|
||||
<img src="img/paxcounter_downlink_example.png">
|
||||
@ -525,6 +525,14 @@ Send for example `8386` as Downlink on Port 2 to get battery status and time/dat
|
||||
0 ... 255 device sleep cycle in seconds/2
|
||||
e.g. 120 -> device sleeps 240 seconds after each send cycle [default = 0]
|
||||
|
||||
0x20 store device configuration
|
||||
|
||||
Current device runtime configuration is stored in NVRAM, will be reloaded after restart
|
||||
|
||||
0x21 load device configuration
|
||||
|
||||
Current device runtime configuration will be loaded from NVRAM, replacing current settings immediately (use with care!)
|
||||
|
||||
0x80 get device configuration
|
||||
|
||||
Device answers with it's current configuration on Port 3.
|
||||
|
@ -369,28 +369,37 @@ void set_enscount(uint8_t val[]) {
|
||||
cfg.payloadmask &= ~SENSOR1_DATA;
|
||||
}
|
||||
|
||||
void set_loadconfig(uint8_t val[]) {
|
||||
ESP_LOGI(TAG, "Remote command: load config from NVRAM");
|
||||
loadConfig();
|
||||
};
|
||||
|
||||
void set_saveconfig(uint8_t val[]) {
|
||||
ESP_LOGI(TAG, "Remote command: save config to NVRAM");
|
||||
saveConfig(false);
|
||||
};
|
||||
|
||||
// assign previously defined functions to set of numeric remote commands
|
||||
// format: opcode, function, #bytes params,
|
||||
// flag (true = do make settings persistent / false = don't)
|
||||
//
|
||||
// format: {opcode, function, number of function arguments}
|
||||
static const cmd_t table[] = {
|
||||
{0x01, set_rssi, 1, true}, {0x02, set_countmode, 1, true},
|
||||
{0x03, set_gps, 1, true}, {0x04, set_display, 1, true},
|
||||
{0x05, set_loradr, 1, true}, {0x06, set_lorapower, 1, true},
|
||||
{0x07, set_loraadr, 1, true}, {0x08, set_screensaver, 1, true},
|
||||
{0x09, set_reset, 1, false}, {0x0a, set_sendcycle, 1, true},
|
||||
{0x0b, set_wifichancycle, 1, true}, {0x0c, set_blescantime, 1, true},
|
||||
{0x0d, set_macfilter, 1, false}, {0x0e, set_blescan, 1, true},
|
||||
{0x0f, set_wifiant, 1, true}, {0x10, set_rgblum, 1, true},
|
||||
{0x11, set_monitor, 1, true}, {0x12, set_beacon, 7, false},
|
||||
{0x13, set_sensor, 2, true}, {0x14, set_payloadmask, 1, true},
|
||||
{0x15, set_bme, 1, true}, {0x16, set_batt, 1, true},
|
||||
{0x17, set_wifiscan, 1, true}, {0x18, set_enscount, 1, true},
|
||||
{0x19, set_sleepcycle, 1, true}, {0x80, get_config, 0, false},
|
||||
{0x81, get_status, 0, false}, {0x83, get_batt, 0, false},
|
||||
{0x84, get_gps, 0, false}, {0x85, get_bme, 0, false},
|
||||
{0x86, get_time, 0, false}, {0x87, set_time, 0, false},
|
||||
{0x99, set_flush, 0, false}};
|
||||
{0x01, set_rssi, 1}, {0x02, set_countmode, 1},
|
||||
{0x03, set_gps, 1}, {0x04, set_display, 1},
|
||||
{0x05, set_loradr, 1}, {0x06, set_lorapower, 1},
|
||||
{0x07, set_loraadr, 1}, {0x08, set_screensaver, 1},
|
||||
{0x09, set_reset, 1}, {0x0a, set_sendcycle, 1},
|
||||
{0x0b, set_wifichancycle, 1}, {0x0c, set_blescantime, 1},
|
||||
{0x0d, set_macfilter, 1}, {0x0e, set_blescan, 1},
|
||||
{0x0f, set_wifiant, 1}, {0x10, set_rgblum, 1},
|
||||
{0x11, set_monitor, 1}, {0x12, set_beacon, 7},
|
||||
{0x13, set_sensor, 2}, {0x14, set_payloadmask, 1},
|
||||
{0x15, set_bme, 1}, {0x16, set_batt, 1},
|
||||
{0x17, set_wifiscan, 1}, {0x18, set_enscount, 1},
|
||||
{0x19, set_sleepcycle, 1}, {0x20, set_loadconfig, 0},
|
||||
{0x21, set_saveconfig, 0}, {0x80, get_config, 0},
|
||||
{0x81, get_status, 0}, {0x83, get_batt, 0},
|
||||
{0x84, get_gps, 0}, {0x85, get_bme, 0},
|
||||
{0x86, get_time, 0}, {0x87, set_time, 0},
|
||||
{0x99, set_flush, 0}};
|
||||
|
||||
static const uint8_t cmdtablesize =
|
||||
sizeof(table) / sizeof(table[0]); // number of commands in command table
|
||||
@ -402,7 +411,6 @@ void rcmd_execute(const uint8_t cmd[], const uint8_t cmdlength) {
|
||||
return;
|
||||
|
||||
uint8_t foundcmd[cmdlength], cursor = 0;
|
||||
bool storeflag = false;
|
||||
|
||||
while (cursor < cmdlength) {
|
||||
|
||||
@ -414,8 +422,6 @@ void rcmd_execute(const uint8_t cmd[], const uint8_t cmdlength) {
|
||||
memmove(foundcmd, cmd + cursor,
|
||||
table[i].params); // strip opcode from cmd array
|
||||
cursor += table[i].params;
|
||||
if (table[i].store) // ceck if function needs to store configuration
|
||||
storeflag = true;
|
||||
table[i].func(
|
||||
foundcmd); // execute assigned function with given parameters
|
||||
} else
|
||||
@ -432,9 +438,6 @@ void rcmd_execute(const uint8_t cmd[], const uint8_t cmdlength) {
|
||||
}
|
||||
} // command parsing loop
|
||||
|
||||
if (storeflag)
|
||||
saveConfig();
|
||||
|
||||
} // rcmd_execute()
|
||||
|
||||
// remote command processing task
|
||||
|
Loading…
Reference in New Issue
Block a user