secondary LED added

include/led.h

@@ -38,5 +38,6 @@ void rgb_set_color(uint16_t hue);
 void blink_LED(uint16_t set_color, uint16_t set_blinkduration);
 void ledLoop(void *parameter);
 void switch_LED(uint8_t state);
+void switch_LED1(uint8_t state);
 
 #endif

src/display.cpp

@@ -89,7 +89,7 @@ void init_display(const char *Productname, const char *Version) {
 #endif
 
 // Display chip information
-#if(VERBOSE)
+#if (VERBOSE)
     esp_chip_info_t chip_info;
     esp_chip_info(&chip_info);
     u8x8.printf("ESP32 %d cores\nWiFi%s%s\n", chip_info.cores,
@@ -105,7 +105,7 @@ void init_display(const char *Productname, const char *Version) {
     u8x8.print(" v");
     u8x8.println(PROGVERSION);
 
-#if(HAS_LORA)
+#if (HAS_LORA)
     u8x8.println("DEVEUI:");
     os_getDevEui((u1_t *)buf);
     DisplayKey(buf, 8, true);
@@ -114,7 +114,7 @@ void init_display(const char *Productname, const char *Version) {
     u8x8.clear();
     u8x8.setPowerSave(!cfg.screenon); // set display off if disabled
     u8x8.draw2x2String(0, 0, "PAX:0");
-#if(BLECOUNTER)
+#if (BLECOUNTER)
     u8x8.setCursor(0, 3);
     u8x8.printf("BLTH:0");
 #endif
@@ -131,7 +131,8 @@ void refreshtheDisplay() {
 
   uint8_t msgWaiting;
   char timeState, buff[16];
-  const time_t t = myTZ.toLocal(now()); // note: call now() here *before* locking mutex!
+  const time_t t =
+      myTZ.toLocal(now()); // note: call now() here *before* locking mutex!
 
   // block i2c bus access
   if (I2C_MUTEX_LOCK()) {
@@ -163,7 +164,7 @@ void refreshtheDisplay() {
 #endif
 
 // update GPS status (line 2)
-#if(HAS_GPS)
+#if (HAS_GPS)
     // have we ever got valid gps data?
     if (gps.passedChecksum() > 0) {
       u8x8.setCursor(9, 2);
@@ -178,7 +179,7 @@ void refreshtheDisplay() {
 #endif
 
     // update bluetooth counter + LoRa SF (line 3)
-#if(BLECOUNTER)
+#if (BLECOUNTER)
     u8x8.setCursor(0, 3);
     if (cfg.blescan)
       u8x8.printf("BLTH:%-5d", macs_ble);
@@ -186,7 +187,7 @@ void refreshtheDisplay() {
       u8x8.printf("%s", "BLTH:off");
 #endif
 
-#if(HAS_LORA)
+#if (HAS_LORA)
     u8x8.setCursor(11, 3);
     u8x8.printf("SF:");
     if (cfg.adrmode) // if ADR=on then display SF value inverse
@@ -209,7 +210,7 @@ void refreshtheDisplay() {
     u8x8.setCursor(10, 5);
     u8x8.printf("%4dKB", getFreeRAM() / 1024);
 
-#if(HAS_LORA)
+#if (HAS_LORA)
     u8x8.setCursor(0, 6);
 #if (!defined HAS_DCF77) && (!defined HAS_IF482)
     // update LoRa status display (line 6)

src/hal/ecopower.h

@@ -20,7 +20,8 @@
 #define EXT_POWER_ON    0
 #define EXT_POWER_OFF   1
 
-#define HAS_LED (12) // on board  LED
+#define HAS_LED (2) // on board green LED
+#define HAS_LED1 (12) // on board red LED
 //#define HAS_BUTTON (0) // on board button -> don't use, is same as RTC_INT!
 
 // Pins for I2C interface of OLED Display

src/led.cpp

@@ -107,6 +107,26 @@ void switch_LED(uint8_t state) {
 #endif
 }
 
+void switch_LED1(uint8_t state) {
+#if (HAS_LED1 != NOT_A_PIN)
+  if (state == LED_ON) {
+    // switch LED on
+#ifdef LED1_ACTIVE_LOW
+    digitalWrite(HAS_LED1, LOW);
+#else
+    digitalWrite(HAS_LED1, HIGH);
+#endif
+  } else if (state == LED_OFF) {
+    // switch LED off
+#ifdef LED1_ACTIVE_LOW
+    digitalWrite(HAS_LED1, HIGH);
+#else
+    digitalWrite(HAS_LED1, LOW);
+#endif
+  }
+#endif
+}
+
 void blink_LED(uint16_t set_color, uint16_t set_blinkduration) {
 #if (HAS_LED != NOT_A_PIN) || defined(HAS_RGB_LED)
   LEDColor = set_color;                 // set color for RGB LED

src/main.cpp

@@ -195,7 +195,11 @@ void setup() {
 #if (HAS_LED != NOT_A_PIN)
   pinMode(HAS_LED, OUTPUT);
   strcat_P(features, " LED");
-// switch on power LED if we have 2 LEDs, else use it for status
+#if (HAS_LED1 != NOT_A_PIN)
+  pinMode(HAS_LED1, OUTPUT);
+  strcat_P(features, " LED1");
+#endif
+// use LED for power display if we have additional RGB LED, else for status
 #ifdef HAS_RGB_LED
   switch_LED(LED_ON);
   strcat_P(features, " RGB");

src/timekeeper.cpp

@@ -130,8 +130,10 @@ void IRAM_ATTR CLOCKIRQ(void) {
     xTaskNotifyFromISR(ClockTask, uint32_t(now()), eSetBits,
                        &xHigherPriorityTaskWoken);
 
+#ifdef HAS_DISPLAY
 #if (defined GPS_INT || defined RTC_INT)
   TimePulseTick = !TimePulseTick; // flip pulse ticker
+#endif
 #endif
 
   portEXIT_CRITICAL_ISR(&mux);
@@ -213,6 +215,7 @@ void clock_loop(void *taskparameter) { // ClockTask
 
 #define nextmin(t) (t + DCF77_FRAME_SIZE + 1) // next minute
 
+  static bool led1_state = false;
   uint32_t printtime;
   time_t t = *((time_t *)taskparameter), last_printtime = 0; // UTC time seconds
   TickType_t startTime;
@@ -243,6 +246,14 @@ void clock_loop(void *taskparameter) { // ClockTask
 
     last_printtime = t;
 
+#ifdef HAS_LED1
+    if (led1_state)
+      switch_LED1(LED_OFF);
+    else
+      switch_LED1(LED_ON);
+    led1_state = !led1_state;
+#endif
+
 #if defined HAS_IF482
 
     vTaskDelayUntil(&startTime, txDelay); // wait until moment to fire