Merge pull request #696 from cyberman54/development

Development

include/cyclic.h

@@ -10,6 +10,7 @@
 #include "display.h"
 #include "sds011read.h"
 #include "sdcard.h"
+#include "macsniff.h"
 
 extern Ticker cyclicTimer;
 

include/hash.h

@@ -2,7 +2,7 @@
 #define _HASH_H
 
 #include <Arduino.h>
-#include <inttypes.h>
+#include <RokkitHash.h>
 
 uint32_t IRAM_ATTR hash(const char *data, int len);
 

include/macsniff.h

@@ -14,7 +14,7 @@
 #include "corona.h"
 #endif
 
-uint16_t get_salt(void);
+uint32_t renew_salt(void);
 uint64_t macConvert(uint8_t *paddr);
 esp_err_t macQueueInit(void);
 void mac_process(void *pvParameters);

include/mqttclient.h

@@ -6,16 +6,6 @@
 #include <MQTT.h>
 #include <ETH.h>
 
-#define MQTT_ETHERNET 0 // select PHY: set 0 for Wifi, 1 for ethernet
-#define MQTT_INTOPIC "paxin"
-#define MQTT_OUTTOPIC "paxout"
-#define MQTT_PORT 1883
-#define MQTT_SERVER "paxcounter.cloud.shiftr.io"
-#define MQTT_USER "public"
-#define MQTT_PASSWD "public"
-#define MQTT_RETRYSEC 20  // retry reconnect every 20 seconds
-#define MQTT_KEEPALIVE 10 // keep alive interval in seconds
-
 #ifndef MQTT_CLIENTNAME
 #define MQTT_CLIENTNAME clientId
 #endif

platformio_orig.ini

@@ -79,6 +79,7 @@ lib_deps_sensors =
     boschsensortec/BSEC Software Library @ 1.6.1480
     https://github.com/ricki-z/SDS011.git
 lib_deps_basic =
+    https://github.com/SukkoPera/Arduino-Rokkit-Hash.git
     bblanchon/ArduinoJson @ ^6
     jchristensen/Timezone @ ^1.2.4
     makuna/RTC @ ^2.3.5

src/bmesensor.cpp

@@ -46,10 +46,10 @@ Adafruit_BMP085 bmp; // I2C
 void setBMEIRQ() { xTaskNotify(irqHandlerTask, BME_IRQ, eSetBits); }
 
 // initialize MEMS sensor
+// return = 0 -> error / return = 1 -> success
 int bme_init(void) {
 
-  // return = 0 -> error / return = 1 -> success
+  int rc = 0;
-  int rc = 1;
 
 #ifdef HAS_BME680
   // block i2c bus access
@@ -63,76 +63,33 @@ int bme_init(void) {
              iaqSensor.version.minor_bugfix);
 
     iaqSensor.setConfig(bsec_config_iaq);
-
-    if (checkIaqSensorStatus())
-      ESP_LOGI(TAG, "BME680 sensor found and initialized");
-    else {
-      ESP_LOGE(TAG, "BME680 sensor not found");
-      rc = 0;
-      goto finish;
-    }
-
     loadState();
-
     iaqSensor.setTemperatureOffset((float)BME_TEMP_OFFSET);
     iaqSensor.updateSubscription(sensorList, 10, BSEC_SAMPLE_RATE_LP);
 
-    if (checkIaqSensorStatus())
+    rc = checkIaqSensorStatus();
-      ESP_LOGI(TAG, "BSEC subscription succesful");
+
-    else {
+  } else
-      ESP_LOGE(TAG, "BSEC subscription error");
-      rc = 0;
-      goto finish;
-    }
-  } else {
     ESP_LOGE(TAG, "I2c bus busy - BME680 initialization error");
-    rc = 0;
-    goto finish;
-  }
 
 #elif defined HAS_BME280
-
-  bool status;
-
-  // block i2c bus access
   if (I2C_MUTEX_LOCK()) {
-
+    rc = bme.begin(BME280_ADDR);
-    status = bme.begin(BME280_ADDR);
+  } else
-    if (!status) {
-      ESP_LOGE(TAG, "BME280 sensor not found");
-      rc = 0;
-      goto finish;
-    }
-    ESP_LOGI(TAG, "BME280 sensor found and initialized");
-  } else {
     ESP_LOGE(TAG, "I2c bus busy - BME280 initialization error");
-    rc = 0;
-    goto finish;
-  }
 
 #elif defined HAS_BMP180
-  bool status;
-  // block i2c bus access
   if (I2C_MUTEX_LOCK()) {
     // Wire.begin(21, 22);
-    status = bmp.begin();
+    rc = bmp.begin();
-    if (!status) {
+  } else
-      ESP_LOGE(TAG, "BMP180 sensor not found");
-      rc = 0;
-      goto finish;
-    }
-    ESP_LOGI(TAG, "BMP180 sensor found and initialized");
-  } else {
     ESP_LOGE(TAG, "I2c bus busy - BMP180 initialization error");
-    rc = 0;
+
-    goto finish;
-  }
 #endif
 
-finish:
   I2C_MUTEX_UNLOCK(); // release i2c bus access
   if (rc)
-    bmecycler.attach(BMECYCLE, setBMEIRQ);
+    bmecycler.attach(BMECYCLE, setBMEIRQ); // start cyclic data transmit
   return rc;
 
 } // bme_init()

src/cyclic.cpp

@@ -97,7 +97,6 @@ void doHousekeeping() {
              "free heap = %d bytes)",
              ESP.getMinFreeHeap(), ESP.getFreeHeap());
     reset_counters(); // clear macs container and reset all counters
-    get_salt();       // get new salt for salting hashes
 
     if (ESP.getMinFreeHeap() <= MEM_LOW) // check again
       do_reset(true);                    // memory leak, reset device
@@ -108,7 +107,6 @@ void doHousekeeping() {
   if (ESP.getMinFreePsram() <= MEM_LOW) {
     ESP_LOGI(TAG, "PSRAM full, counter cleared");
     reset_counters(); // clear macs container and reset all counters
-    get_salt();       // get new salt for salting hashes
 
     if (ESP.getMinFreePsram() <= MEM_LOW) // check again
       do_reset(true);                     // memory leak, reset device
@@ -140,6 +138,7 @@ void reset_counters() {
   macs.clear(); // clear all macs container
   macs_wifi = 0;
   macs_ble = 0;
+  renew_salt(); // get new salt
 #ifdef HAS_DISPLAY
   dp_plotCurve(0, true);
 #endif

src/hash.cpp

@@ -36,55 +36,9 @@
 
 #include "hash.h"
 
-uint32_t IRAM_ATTR rokkit(const char *data, int len) {
+#ifdef ROKKIT_ENABLE_8BIT_OPTIMIZATIONS
-  uint32_t hash, tmp;
+#undef ROKKIT_ENABLE_8BIT_OPTIMIZATIONS
-  int rem;
+#endif
-
-  if (len <= 0 || data == 0)
-    return 0;
-  hash = len;
-  rem = len & 3;
-  len >>= 2;
-
-  /* Main loop */
-  while (len > 0) {
-    hash += *((uint16_t *)data);
-    tmp = (*((uint16_t *)(data + 2)) << 11) ^ hash;
-    hash = (hash << 16) ^ tmp;
-    data += 2 * 2;
-    hash += hash >> 11;
-    len--;
-  }
-
-  /* Handle end cases */
-  switch (rem) {
-  case 3:
-    hash += *((uint16_t *)data);
-    hash ^= hash << 16;
-    hash ^= ((signed char)data[2]) << 18;
-    hash += hash >> 11;
-    break;
-  case 2:
-    hash += *((uint16_t *)data);
-    hash ^= hash << 11;
-    hash += hash >> 17;
-    break;
-  case 1:
-    hash += (signed char)*data;
-    hash ^= hash << 10;
-    hash += hash >> 1;
-  }
-
-  /* Force "avalanching" of final 127 bits */
-  hash ^= hash << 3;
-  hash += hash >> 5;
-  hash ^= hash << 4;
-  hash += hash >> 17;
-  hash ^= hash << 25;
-  hash += hash >> 6;
-
-  return hash;
-}
 
 uint32_t IRAM_ATTR hash(const char *data, int len) {
   return rokkit(data, len);

src/lorawan.cpp

@@ -284,14 +284,10 @@ esp_err_t lmic_init(void) {
   // Pass OTA parameters to LMIC_setSession
 #else
   // load saved session from RTC, if we have one
-  if (RTC_runmode == RUNMODE_WAKEUP) {
+  if (RTC_runmode == RUNMODE_WAKEUP)
     LoadLMICFromRTC();
-  }
-  // otherwise start join procedure if not already joined
-  else {
   if (!LMIC_startJoining())
     ESP_LOGI(TAG, "Already joined");
-  }
 #endif
 
   // start lmic loop task

src/macsniff.cpp

@@ -9,10 +9,11 @@ static const char TAG[] = __FILE__;
 QueueHandle_t MacQueue;
 TaskHandle_t macProcessTask;
 
-uint16_t salt = 0;
+static uint32_t salt = renew_salt();
 
-uint16_t get_salt(void) {
+uint32_t renew_salt(void) {
-  salt = (uint16_t)random(65536); // get new 16bit random for salting hashes
+  salt = esp_random();
+  ESP_LOGV(TAG, "new salt = %04X", salt);
   return salt;
 }
 
@@ -101,9 +102,6 @@ void IRAM_ATTR mac_add(uint8_t *paddr, int8_t rssi, snifftype_t sniff_type) {
 
 uint16_t mac_analyze(MacBuffer_t MacBuffer) {
 
-  if (salt == 0) // ensure we have salt (appears after radio is turned on)
-    return 0;
-
   if ((cfg.rssilimit) &&
       (MacBuffer.rssi < cfg.rssilimit)) { // rssi is negative value
     ESP_LOGI(TAG, "%s RSSI %d -> ignoring (limit: %d)",
@@ -126,8 +124,7 @@ uint16_t mac_analyze(MacBuffer_t MacBuffer) {
     }
   };
 
-  char buff[10]; // temporary buffer for printf
+  uint32_t *mac; // pointer to shortened 4 byte MAC
-  uint32_t *mac; // temporary buffer for shortened MAC
 
   // only last 3 MAC Address bytes are used for MAC address anonymization
   // but since it's uint32 we take 4 bytes to avoid 1st value to be 0.
@@ -138,10 +135,14 @@ uint16_t mac_analyze(MacBuffer_t MacBuffer) {
   // and increment counter on display
   // https://en.wikipedia.org/wiki/MAC_Address_Anonymization
 
-  snprintf(buff, sizeof(buff), "%08X",
+  // reversed 4 byte MAC added to current salt
-           *mac + (uint32_t)salt); // convert unsigned 32-bit salted MAC
+  const uint32_t saltedmac = *mac + salt;
-                                   // to 8 digit hex string
+
-  uint16_t hashedmac = hash(&buff[3], 5); // hash MAC 8 digit -> 5 digit
+  // hashed 4 byte MAC
+  // to save RAM, we use only lower 2 bytes of hash, since collisions don't
+  // matter in our use case
+  const uint16_t hashedmac = hash((const char *)&saltedmac, 4);
+
   auto newmac = macs.insert(hashedmac); // add hashed MAC, if new unique
   bool added =
       newmac.second ? true : false; // true if hashed MAC is unique in container
@@ -183,7 +184,8 @@ uint16_t mac_analyze(MacBuffer_t MacBuffer) {
 
   // Log scan result
   ESP_LOGV(TAG,
-           "%s %s RSSI %ddBi -> salted MAC %s -> Hash %04X -> WiFi:%d  "
+           "%s %s RSSI %ddBi -> MAC %0x:%0x:%0x:%0x:%0x:%0x -> salted %04X"
+           " -> hashed %04X -> WiFi:%d  "
            "BLTH:%d "
 #if (COUNT_ENS)
            "(CWA:%d)"
@@ -191,7 +193,9 @@ uint16_t mac_analyze(MacBuffer_t MacBuffer) {
            "-> %d Bytes left",
            added ? "new  " : "known",
            MacBuffer.sniff_type == MAC_SNIFF_WIFI ? "WiFi" : "BLTH",
-           MacBuffer.rssi, buff, hashedmac, macs_wifi, macs_ble,
+           MacBuffer.rssi, MacBuffer.mac[0], MacBuffer.mac[1], MacBuffer.mac[2],
+           MacBuffer.mac[3], MacBuffer.mac[4], MacBuffer.mac[5], saltedmac,
+           hashedmac, macs_wifi, macs_ble,
 #if (COUNT_ENS)
            cwa_report(),
 #endif

src/main.cpp

@@ -428,7 +428,7 @@ void setup() {
   // initialize salt value using esp_random() called by random() in
   // arduino-esp32 core. Note: do this *after* wifi has started, since
   // function gets it's seed from RF noise
-  get_salt(); // get new 16bit for salting hashes
+  reset_counters();
 
   // start state machine
   ESP_LOGI(TAG, "Starting Interrupt Handler...");
@@ -451,8 +451,10 @@ void setup() {
 #endif
   if (bme_init())
     ESP_LOGI(TAG, "BME sensor initialized");
-  else
+  else {
     ESP_LOGE(TAG, "BME sensor could not be initialized");
+    cfg.payloadmask &= ~MEMS_DATA; // switch off transmit of BME data
+  }
 #endif
 
   // starting timers and interrupts

src/mqttclient.cpp

@@ -41,9 +41,13 @@ esp_err_t mqtt_init(void) {
 
 int mqtt_connect(const char *my_host, const uint16_t my_port) {
   IPAddress mqtt_server_ip;
-  const uint16_t hashed = hash(&ETH.macAddress()[0], 4); // hash MAC to 4 digits
+  uint8_t mac[6];
-  char clientId[16];
+  char clientId[20];
-  snprintf(clientId, 16, "paxcounter_%d", hashed);
+
+  // hash 6 byte MAC to 4 byte hash
+  esp_eth_get_mac(mac);
+  const uint32_t hashedmac = hash((const char *)mac, 6);
+  snprintf(clientId, 20, "paxcounter_%08x", hashedmac);
 
   ESP_LOGI(TAG, "MQTT name is %s", MQTT_CLIENTNAME);
 

src/paxcounter_orig.conf

@@ -121,3 +121,15 @@
 #define CAYENNE_DEVICECONFIG            11	    // device period configuration
 #define CAYENNE_SENSORREAD              13	    // sensor period configuration
 #define CAYENNE_SENSORENABLE            14	    // sensor enable configuration
+
+// MQTT settings, only needed if MQTT is used (#define HAS_MQTT in board hal file)
+#define MQTT_ETHERNET 0 // select PHY: set 0 for Wifi, 1 for ethernet
+#define MQTT_INTOPIC "paxin"
+#define MQTT_OUTTOPIC "paxout"
+#define MQTT_PORT 1883
+#define MQTT_SERVER "public.cloud.shiftr.io"
+#define MQTT_USER "public"
+#define MQTT_PASSWD "public"
+#define MQTT_RETRYSEC 20  // retry reconnect every 20 seconds
+#define MQTT_KEEPALIVE 10 // keep alive interval in seconds
+//#define MQTT_CLIENTNAME "my_paxcounter" // generated by default

src/rcommand.cpp

@@ -18,7 +18,6 @@ void set_reset(uint8_t val[]) {
   case 1: // reset MAC counter
     ESP_LOGI(TAG, "Remote command: reset MAC counter");
     reset_counters(); // clear macs
-    get_salt();       // get new salt
     break;
   case 2: // reset device to factory settings
     ESP_LOGI(TAG, "Remote command: reset device to factory settings");
@@ -119,7 +118,6 @@ void set_countmode(uint8_t val[]) {
     return;
   }
   reset_counters(); // clear macs
-  get_salt();       // get new salt
 }
 
 void set_screensaver(uint8_t val[]) {

src/reset.cpp

@@ -84,24 +84,15 @@ void do_after_reset(void) {
 void enter_deepsleep(const uint64_t wakeup_sec = 60,
                      gpio_num_t wakeup_gpio = GPIO_NUM_MAX) {
 
-  // don't go to sleep while unjoined
+  ESP_LOGI(TAG, "Preparing to sleep...");
-#if (HAS_LORA)
-  if (!LMIC.devaddr) {
-    ESP_LOGI(TAG, "Can't go to sleep while joining");
-    return;
-  }
-#endif
 
+  RTC_runmode = RUNMODE_SLEEP;
   int i;
 
   // validate wake up pin, if we have
   if (!GPIO_IS_VALID_GPIO(wakeup_gpio))
     wakeup_gpio = GPIO_NUM_MAX;
 
-  ESP_LOGI(TAG, "Preparing to sleep...");
-
-  RTC_runmode = RUNMODE_SLEEP;
-
   // stop further enqueuing of senddata and MAC processing
   sendTimer.detach();
 
@@ -125,27 +116,22 @@ void enter_deepsleep(const uint64_t wakeup_sec = 60,
 
   // wait a while (max 100 sec) to clear send queues
   ESP_LOGI(TAG, "Waiting until send queues are empty...");
-  for (i = 10; i > 0; i--) {
+  for (i = 100; i > 0; i--) {
-    if (!allQueuesEmtpy())
+    if (allQueuesEmtpy())
-      vTaskDelay(pdMS_TO_TICKS(10000));
-    else
       break;
+    vTaskDelay(pdMS_TO_TICKS(1000));
   }
-  if (i == 0)
-    goto Error;
 
   // shutdown LMIC safely, waiting max 100 sec
 #if (HAS_LORA)
   ESP_LOGI(TAG, "Waiting until LMIC is idle...");
-  for (i = 10; i > 0; i--) {
+  for (i = 100; i > 0; i--) {
     if ((LMIC.opmode & OP_TXRXPEND) ||
         os_queryTimeCriticalJobs(sec2osticks(wakeup_sec)))
-      vTaskDelay(pdMS_TO_TICKS(10000));
+      vTaskDelay(pdMS_TO_TICKS(1000));
     else
       break;
   }
-  if (i == 0)
-    goto Error;
 #endif // (HAS_LORA)
 
 // shutdown MQTT safely
@@ -165,8 +151,6 @@ void enter_deepsleep(const uint64_t wakeup_sec = 60,
     else
       break;
   }
-  if (i == 0)
-    goto Error;
 
   // save LMIC state to RTC RAM
 #if (HAS_LORA)
@@ -207,10 +191,6 @@ void enter_deepsleep(const uint64_t wakeup_sec = 60,
   RTC_millis += millis();
   ESP_LOGI(TAG, "Going to sleep, good bye.");
   esp_deep_sleep_start();
-
-Error:
-  ESP_LOGE(TAG, "Can't go to sleep. Resetting.");
-  do_reset(true);
 }
 
 unsigned long long uptime() { return (RTC_millis + millis()); }

src/senddata.cpp

@@ -115,7 +115,6 @@ void sendData() {
       // clear counter if not in cumulative counter mode
       if (cfg.countermode != 1) {
         reset_counters(); // clear macs container and reset all counters
-        get_salt();       // get new salt for salting hashes
         ESP_LOGI(TAG, "Counter cleared");
       }
 #ifdef HAS_DISPLAY