DigitalInfinity/ESP32-PaxCounter
1
0 Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

v1.7.11

Browse Source
This commit is contained in:
Klaus K Wilting committed 2019-01-11 18:32:50 +01:00
1 parent 48b68653ab
commit 613ec488fe
3 files changed
+29 -58
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

src/hal/ttgobeam_new.h → src/hal/ttgobeam.h
+16 -25
View File
@@ -6,46 +6,37 @@
#include <stdint.h>
// Hardware related definitions for TTGO T-Beam board
// (only) for older T-Beam version T22_V05 eternal wiring LORA_IO1 to GPIO33 is needed!
//
// pinouts taken from http://tinymicros.com/wiki/TTGO_T-Beam
#define HAS_LED GPIO_NUM_14 // on board green LED, only new version TTGO-BEAM V07
//#define HAS_LED GPIO_NUM_21 // on board green LED, only old verison TTGO-BEAM V05
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
#define CFG_sx1276_radio 1 // HPD13A LoRa SoC
#define BOARD_HAS_PSRAM // use extra 4MB external RAM
#define HAS_BUTTON GPIO_NUM_39 // on board button (next to reset)
#define HAS_BATTERY_PROBE ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
#define BATT_FACTOR 2 // voltage divider 100k/100k on board
#define HAS_GPS 1 // use on board GPS
#define GPS_SERIAL 9600, SERIAL_8N1, GPIO_NUM_12, GPIO_NUM_15 // UBlox NEO 6M or 7M with default configuration
// enable only if device has these sensors, otherwise comment these lines
// BME680 sensor on I2C bus
//#define HAS_BME GPIO_NUM_21, GPIO_NUM_22 // SDA, SCL
//#define BME_ADDR BME680_I2C_ADDR_PRIMARY // connect SDIO of BME680 to GND
#define HAS_LED GPIO_NUM_14 // on board green LED
// user defined sensors
//#define HAS_SENSORS 1 // comment out if device has user defined sensors
// display (if connected)
//#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
//#define MY_OLED_SDA (21)
//#define MY_OLED_SCL (22)
//#define MY_OLED_RST U8X8_PIN_NONE
//#define DISPLAY_FLIP 1 // use if display is rotated
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
#define CFG_sx1276_radio 1 // HPD13A LoRa SoC
#define BOARD_HAS_PSRAM // use extra 4MB external RAM
// user defined sensors (if connected)
//#define HAS_SENSORS 1 // comment out if device has user defined sensors
//#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
#define HAS_BUTTON GPIO_NUM_39 // on board button "SW5"
#define HAS_BATTERY_PROBE ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
#define BATT_FACTOR 2 // voltage divider 100k/100k on board
#define HAS_GPS 1 // use on board GPS
#define GPS_SERIAL 9600, SERIAL_8N1, GPIO_NUM_12, GPIO_NUM_15 // UBlox NEO 6M or 7M with default configuration
// Pins for LORA chip SPI interface, reset line and interrupt lines
#define LORA_SCK (5)
#define LORA_CS (18)
#define LORA_MISO (19)
#define LORA_MOSI (27)
#define LORA_RST (23)
#define LORA_IRQ (26)
#define LORA_IO1 (33) // for T-Beam T22_V05 and T22_V07, for other versions use ttgobeam_old.h
#define LORA_IO2 (32)
#endif
src/hal/ttgobeam_old.h
+4 -4
View File
@@ -9,11 +9,11 @@
// enable only if device has these sensors, otherwise comment these lines
// BME680 sensor on I2C bus
//#define HAS_BME GPIO_NUM_21, GPIO_NUM_22 // SDA, SCL
//#define BME_ADDR BME680_I2C_ADDR_PRIMARY // connect SDIO of BME680 to GND
//#define HAS_LED NOT_A_PIN // on board green LED uses same GPIO as SDA!
#define HAS_BME GPIO_NUM_21, GPIO_NUM_22 // SDA, SCL
#define BME_ADDR BME680_I2C_ADDR_PRIMARY // connect SDIO of BME680 to GND
#define HAS_LED NOT_A_PIN // on board green LED uses same GPIO as SDA!
#define HAS_LED GPIO_NUM_21 // on board green LED
// #define HAS_LED GPIO_NUM_21 // on board green LED
// user defined sensors
//#define HAS_SENSORS 1 // comment out if device has user defined sensors