Merge pull request #779 from cyberman54/master

sync dev to master
This commit is contained in:
Verkehrsrot 2021-03-31 16:25:25 +02:00 committed by GitHub
commit 5c98be2b96
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
4 changed files with 5 additions and 9 deletions

View File

@ -223,7 +223,7 @@ Bluetooth low energy service UUID 0xFD6F, used by Google/Apple COVID-19 Exposure
#define COUNT_ENS 1 // enable ENS monitoring function
#define BLECOUNTER 1 // enable bluetooth sniffing
#define WIFICOUNTER 0 // disable wifi sniffing (improves BLE scan speed)
#define HAS_SENSOR_1 1 // optional: transmit ENS counter data to server
#define HAS_SENSOR_1 1 // optional, in board's hal file: transmit ENS counter data to server
# SD-card
@ -372,9 +372,9 @@ Hereafter described is the default *plain* format, which uses MSB bit numbering.
The device listenes for remote control commands on LoRaWAN Port 2. Multiple commands per downlink are possible by concatenating them, but must not exceed a maximum of 10 bytes per downlink.
Note: settings can be stored in NVRAM to make them persistant (reloaded during device startup / restart). To store settings, use command 0x20.
Note: settings can be stored in NVRAM to make them persistant (reloaded during device startup / restart). To store settings, use command 0x21.
Send for example `8386` as Downlink on Port 2 to get battery status and time/date from the device.
Send for example `83` `86` as Downlink on Port 2 to get battery status and time/date from the device.
<img src="img/paxcounter_downlink_example.png">
0x01 set scan RSSI limit

View File

@ -1,6 +1,7 @@
#ifndef _PAYLOAD_H_
#define _PAYLOAD_H_
#include "sensor.h"
#include "sds011read.h"
// MyDevices CayenneLPP 1.0 channels for Synamic sensor payload format

View File

@ -57,7 +57,7 @@ extra_scripts = pre:build.py
otakeyfile = ota.conf
lorakeyfile = loraconf.h
lmicconfigfile = lmic_config.h
platform_espressif32 = espressif32@3.1.1
platform_espressif32 = espressif32@3.2.0
monitor_speed = 115200
upload_speed = 115200 ; set by build.py and taken from hal file
display_library = ; set by build.py and taken from hal file

View File

@ -31,11 +31,6 @@
#define COUNT_ENS 1 // count found number of devices which advertise Exposure Notification Service
// set to 1 if you want to enable this function [default=0]
// for additional sensors (added by some user)
#define HAS_SENSOR_1 1 // set to 1 to enable data transfer of user sensor #1 (also used as ENS counter) [default=0]
#define HAS_SENSOR_2 0 // set to 1 to enable data transfer of user sensor #2 [default=0]
#define HAS_SENSOR_3 0 // set to 1 to enable data transfer of user sensor #3 [default=0]
/* Note: guide for setting bluetooth parameters
*
* |< Scan Window > |< Scan Window > | ... |< Scan Window > |