T-Beam V10 (AXP192 PMU) enhanced power functions

include/irqhandler.h

@@ -10,12 +10,14 @@
 #define UNMASK_IRQ 0x040
 #define BME_IRQ 0x080
 #define MATRIX_DISPLAY_IRQ 0x100
+#define PMU_IRQ 0x200
 
 #include "globals.h"
 #include "cyclic.h"
 #include "senddata.h"
 #include "timekeeper.h"
 #include "bmesensor.h"
+#include "power.h"
 
 void irqHandler(void *pvParameters);
 void mask_user_IRQ();
@@ -33,5 +35,9 @@ void IRAM_ATTR MatrixDisplayIRQ();
 void IRAM_ATTR ButtonIRQ();
 #endif
 
+#ifdef HAS_PMU
+void IRAM_ATTR PMUIRQ();
+#endif
+
 
 #endif

include/power.h

@@ -11,11 +11,14 @@
 
 #ifdef HAS_PMU
 #include <axp20x.h>
+extern AXP20X_Class pmu; // Make axp instance globally availabe
+void pover_event_IRQ(void);
 #endif
 
 void AXP192_init(void);
 uint16_t read_voltage(void);
 void calibrate_voltage(void);
-uint8_t getBattLevel (void);
+uint8_t getBattLevel(void);
+
 
 #endif

src/irqhandler.cpp

@@ -63,6 +63,12 @@ void irqHandler(void *pvParameters) {
     }
 #endif
 
+// do we have a power event?
+#if (HAS_PMU)
+    if (InterruptStatus & PMU_IRQ)
+      pover_event_IRQ();
+#endif
+
     // is time to send the payload?
     if (InterruptStatus & SENDCYCLE_IRQ)
       sendData();
@@ -106,6 +112,18 @@ void IRAM_ATTR ButtonIRQ() {
 }
 #endif
 
+#ifdef HAS_PMU
+void IRAM_ATTR PMUIRQ() {
+  BaseType_t xHigherPriorityTaskWoken = pdFALSE;
+
+  xTaskNotifyFromISR(irqHandlerTask, PMU_IRQ, eSetBits,
+                     &xHigherPriorityTaskWoken);
+
+  if (xHigherPriorityTaskWoken)
+    portYIELD_FROM_ISR();
+}
+#endif
+
 void mask_user_IRQ() { xTaskNotify(irqHandlerTask, MASK_IRQ, eSetBits); }
 
 void unmask_user_IRQ() { xTaskNotify(irqHandlerTask, UNMASK_IRQ, eSetBits); }

src/power.cpp

@@ -9,6 +9,43 @@ static const char TAG[] = __FILE__;
 
 AXP20X_Class pmu;
 
+void pover_event_IRQ(void) {
+  // block i2c bus access
+  if (I2C_MUTEX_LOCK()) {
+    pmu.readIRQ();
+    // put your power event handler code here
+
+    if (pmu.isVbusOverVoltageIRQ())
+      ESP_LOGI(TAG, "USB voltage too high.");
+    if (pmu.isVbusPlugInIRQ())
+      ESP_LOGI(TAG, "USB plugged.");
+    if (pmu.isVbusRemoveIRQ())
+      ESP_LOGI(TAG, "USB unplugged.");
+
+    if (pmu.isBattPlugInIRQ())
+      ESP_LOGI(TAG, "Battery is connected.");
+    if (pmu.isBattRemoveIRQ())
+      ESP_LOGI(TAG, "Battery was removed.");
+    if (pmu.isChargingIRQ())
+      ESP_LOGI(TAG, "Battery is charging.");
+    if (pmu.isChargingDoneIRQ())
+      ESP_LOGI(TAG, "Battery charging done.");
+    if (pmu.isBattTempLowIRQ())
+      ESP_LOGI(TAG, "Battery high temperature.");
+    if (pmu.isBattTempHighIRQ())
+      ESP_LOGI(TAG, "Battery low temperature.");
+
+    if (pmu.isPEKShortPressIRQ())
+      ESP_LOGI(TAG, "Power Button short pressed.");
+    if (pmu.isPEKLongtPressIRQ())
+      ESP_LOGI(TAG, "Power Button long pressed.");
+
+    pmu.clearIRQ();
+    I2C_MUTEX_UNLOCK(); // release i2c bus access
+  } else
+    ESP_LOGI(TAG, "Unknown PMU event.");
+}
+
 void AXP192_init(void) {
 
   // block i2c bus access
@@ -27,25 +64,17 @@ void AXP192_init(void) {
       pmu.setChgLEDMode(AXP20X_LED_LOW_LEVEL);
       pmu.adc1Enable(AXP202_BATT_CUR_ADC1, 1);
 
-      /*
       // I2C access of AXP202X library currently is not mutexable
       // so we need to disable AXP interrupts
 
-
-        #ifdef PMU_INT
+#ifdef PMU_INT
       pinMode(PMU_INT, INPUT_PULLUP);
-            attachInterrupt(digitalPinToInterrupt(PMU_INT),
-                            [] {
-                              ESP_LOGI(TAG, "Power source changed");
-                              // put your code here
-                            },
-                            FALLING);
+      attachInterrupt(digitalPinToInterrupt(PMU_INT), PMUIRQ, FALLING);
       pmu.enableIRQ(AXP202_VBUS_REMOVED_IRQ | AXP202_VBUS_CONNECT_IRQ |
                         AXP202_BATT_REMOVED_IRQ | AXP202_BATT_CONNECT_IRQ,
                     1);
       pmu.clearIRQ();
-        #endif // PMU_INT
-        */
+#endif // PMU_INT
 
       ESP_LOGI(TAG, "AXP192 PMU initialized.");