testing GPS

src/hal/ttgobeam.h

@@ -2,20 +2,20 @@
 
 #define CFG_sx1276_radio 1 // HPD13A LoRa SoC
 
-#define HAS_LED 21 // on board green LED_G1
-#define HAS_BUTTON GPIO_NUM_0 // on board button "BOOT" (next to reset button)
+#define HAS_LED GPIO_NUM_21 // on board green LED_G1
+//#define HAS_BUTTON GPIO_NUM_39 // on board button "BOOT" (next to reset button) !! seems not to work!!
 #define HAS_BATTERY_PROBE ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
 #define BATT_FACTOR 2 // voltage divider 100k/100k on board
-#define HAS_GPS 9600, SERIAL_8N1, 12, 15   //17-TX 18-RX
+#define HAS_GPS 9600, SERIAL_8N1, 12, 15
 
 // re-define pin definitions of pins_arduino.h
-#define PIN_SPI_SS    18 // ESP32 GPIO18 (Pin18) -- HPD13A NSS/SEL (Pin4) SPI Chip Select Input
-#define PIN_SPI_MOSI  27 // ESP32 GPIO27 (Pin27) -- HPD13A MOSI/DSI (Pin6) SPI Data Input
-#define PIN_SPI_MISO  19 // ESP32 GPIO19 (Pin19) -- HPD13A MISO/DSO (Pin7) SPI Data Output
-#define PIN_SPI_SCK   5  // ESP32 GPIO5 (Pin5)   -- HPD13A SCK (Pin5) SPI Clock Input
+#define PIN_SPI_SS    GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- HPD13A NSS/SEL (Pin4) SPI Chip Select Input
+#define PIN_SPI_MOSI  GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- HPD13A MOSI/DSI (Pin6) SPI Data Input
+#define PIN_SPI_MISO  GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- HPD13A MISO/DSO (Pin7) SPI Data Output
+#define PIN_SPI_SCK   GPIO_NUM_5  // ESP32 GPIO5 (Pin5)   -- HPD13A SCK (Pin5) SPI Clock Input
 
 // non arduino pin definitions
 #define RST   LMIC_UNUSED_PIN // connected to ESP32 RST/EN
-#define DIO0  26 // ESP32 GPIO26 <-> HPD13A IO0
-#define DIO1  33 // Lora1 <-> HPD13A IO1 // !! NEEDS EXTERNAL WIRING !!
-#define DIO2  32 // Lora2 <-> HPD13A IO2 // needs external wiring, but not necessary for LoRa, only FSK
+#define DIO0  GPIO_NUM_26 // ESP32 GPIO26 <-> HPD13A IO0
+#define DIO1  GPIO_NUM_33 // Lora1 <-> HPD13A IO1 // !! NEEDS EXTERNAL WIRING !!
+#define DIO2  LMIC_UNUSED_PIN // Lora2 <-> HPD13A IO2 // needs external wiring, but not necessary for LoRa, only FSK