diff --git a/include/payload.h b/include/payload.h
index 2fce0fff..f5872881 100644
--- a/include/payload.h
+++ b/include/payload.h
@@ -66,8 +66,9 @@ private:
   void writeUint32(uint32_t i);
   void writeUint16(uint16_t i);
   void writeUint8(uint8_t i);
-  void writeFloat(float humidity);
-  void writeUFloat(float temperature);
+  void writeFloat(float value);
+  void writeUFloat(float value);
+  void writePressure(float value);
   void writeVersion(char * version);
   void writeBitmap(bool a, bool b, bool c, bool d, bool e, bool f, bool g,
                    bool h);
diff --git a/platformio.ini b/platformio.ini
index c329409b..49369f08 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -6,7 +6,7 @@
 
 ; ---> SELECT TARGET PLATFORM HERE! <---
 [platformio]
-;env_default = generic
+env_default = generic
 ;env_default = ebox
 ;env_default = eboxtube
 ;env_default = heltec
@@ -15,7 +15,7 @@
 ;env_default = ttgov2
 ;env_default = ttgov21old
 ;env_default = ttgov21new
-env_default = ttgobeam
+;env_default = ttgobeam
 ;env_default = lopy
 ;env_default = lopy4
 ;env_default = fipy
@@ -29,13 +29,13 @@ description = Paxcounter is a proof-of-concept ESP32 device for metering passeng
 
 [common]
 ; for release_version use max. 10 chars total, use any decimal format like "a.b.c"
-release_version = 1.6.88
+release_version = 1.6.9
 ; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
 ; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
-debug_level = 3
+debug_level = 0
 ; UPLOAD MODE: select esptool to flash via USB/UART, select custom to upload to cloud for OTA
-;upload_protocol = esptool
-upload_protocol = custom
+upload_protocol = esptool
+;upload_protocol = custom
 extra_scripts = pre:build.py
 keyfile = ota.conf
 platform_espressif32 = https://github.com/platformio/platform-espressif32.git#a7b1fe6
diff --git a/src/TTN/packed_decoder.js b/src/TTN/packed_decoder.js
index 46ac91c2..a8f71f9e 100644
--- a/src/TTN/packed_decoder.js
+++ b/src/TTN/packed_decoder.js
@@ -43,7 +43,7 @@ function Decoder(bytes, port) {
 
     if (port === 7) {
         // BME680 sensor data     
-        return decode(bytes, [float, ufloat, ufloat, ufloat], ['temperature', 'pressure', 'humidity', 'air']);
+        return decode(bytes, [float, uint16, ufloat, ufloat], ['temperature', 'pressure', 'humidity', 'air']);
     }
 
 }
@@ -151,6 +151,16 @@ var ufloat = function (bytes) {
 };
 ufloat.BYTES = 2;
 
+var pressure = function (bytes) {
+    if (bytes.length !== pressure.BYTES) {
+        throw new Error('Pressure must have exactly 2 bytes');
+    }
+
+    var h = bytesToInt(bytes);
+    return +(h / 10).toFixed(1);
+};
+pressure.BYTES = 2;
+
 var bitmap = function (byte) {
     if (byte.length !== bitmap.BYTES) {
         throw new Error('Bitmap must have exactly 1 byte');
@@ -195,6 +205,7 @@ if (typeof module === 'object' && typeof module.exports !== 'undefined') {
         uptime: uptime,
         float: float,
         ufloat: ufloat,
+        pressure: pressure,
         latLng: latLng,
         hdop: hdop,
         bitmap: bitmap,
diff --git a/src/payload.cpp b/src/payload.cpp
index 14991e96..a00bd052 100644
--- a/src/payload.cpp
+++ b/src/payload.cpp
@@ -194,7 +194,7 @@ void PayloadConvert::addSensor(uint8_t buf[]) {
 void PayloadConvert::addBME(bmeStatus_t value) {
 #ifdef HAS_BME
   writeFloat(value.temperature);
-  writeUFloat(value.pressure);
+  writePressure(value.pressure);
   writeUFloat(value.humidity);
   writeUFloat(value.iaq);
 #endif
@@ -233,8 +233,13 @@ void PayloadConvert::writeUint16(uint16_t i) { intToBytes(cursor, i, 2); }
 
 void PayloadConvert::writeUint8(uint8_t i) { intToBytes(cursor, i, 1); }
 
-void PayloadConvert::writeUFloat(float humidity) {
-  int16_t h = (int16_t)(humidity * 100);
+void PayloadConvert::writeUFloat(float value) {
+  int16_t h = (int16_t)(value * 100);
+  intToBytes(cursor, h, 2);
+}
+
+void PayloadConvert::writePressure(float value) {
+  int16_t h = (int16_t)(value);
   intToBytes(cursor, h, 2);
 }
 
@@ -242,9 +247,9 @@ void PayloadConvert::writeUFloat(float humidity) {
  * Uses a 16bit two's complement with two decimals, so the range is
  * -327.68 to +327.67 degrees
  */
-void PayloadConvert::writeFloat(float temperature) {
-  int16_t t = (int16_t)(temperature * 100);
-  if (temperature < 0) {
+void PayloadConvert::writeFloat(float value) {
+  int16_t t = (int16_t)(value * 100);
+  if (value < 0) {
     t = ~-t;
     t = t + 1;
   }
@@ -372,11 +377,10 @@ void PayloadConvert::addBME(bmeStatus_t value) {
   // 0.1°C per bit => -3276,7 .. +3276,7 °C
   int16_t temperature = (int16_t)(value.temperature * 10.0);
   // 0.1 hPa per bit => 0 .. 6553,6 hPa
-  uint16_t pressure = value.pressure * 10;
+  uint16_t pressure = (uint16_t)(value.pressure * 10);
   // 0.5% per bit => 0 .. 128 %C
   uint8_t humidity = (uint8_t)(value.humidity * 2.0);
-  // 0.01 IAQ per bit => 0 .. 655,36 IAQ
-  uint16_t iaq = (uint16_t)value.iaq * 100;
+  int16_t iaq = (int16_t)(value.iaq);
 
 #if (PAYLOAD_ENCODER == 3)
   buffer[cursor++] = LPP_TEMPERATURE_CHANNEL;
@@ -398,7 +402,7 @@ void PayloadConvert::addBME(bmeStatus_t value) {
 #if (PAYLOAD_ENCODER == 3)
   buffer[cursor++] = LPP_AIR_CHANNEL;
 #endif
-  buffer[cursor++] = LPP_ANALOG_INPUT; // 2 bytes 0.01 Signed
+  buffer[cursor++] = LPP_LUMINOSITY; // 2 bytes, 1.0 unsigned
   buffer[cursor++] = highByte(iaq);
   buffer[cursor++] = lowByte(iaq);
 #endif // HAS_BME
diff --git a/src/senddata.cpp b/src/senddata.cpp
index 5860c5fb..bed8d312 100644
--- a/src/senddata.cpp
+++ b/src/senddata.cpp
@@ -7,9 +7,20 @@ void SendPayload(uint8_t port) {
   MessageBuffer_t SendBuffer; // contains MessageSize, MessagePort, Message[]
 
   SendBuffer.MessageSize = payload.getSize();
-  SendBuffer.MessagePort = PAYLOAD_ENCODER <= 2
-                               ? port
-                               : (PAYLOAD_ENCODER == 4 ? LPP2PORT : LPP1PORT);
+  switch (PAYLOAD_ENCODER) {
+  case 1:
+  case 2:
+    SendBuffer.MessagePort = port;
+    break;
+  case 3:
+    SendBuffer.MessagePort = LPP1PORT;
+    break;
+  case 4:
+    SendBuffer.MessagePort = LPP2PORT;
+    break;
+  default:
+    SendBuffer.MessagePort = port;
+  }
   memcpy(SendBuffer.Message, payload.getBuffer(), payload.getSize());
 
   // enqueue message in device's send queues