Merge branch 'development' of https://github.com/cyberman54/ESP32-Paxcounter into development
This commit is contained in:
commit
4b9beff3bd
5
LICENSE
5
LICENSE
@ -217,6 +217,11 @@ Arduino-LMIC Library
|
||||
TTN OTAA Example
|
||||
https://github.com/matthijskooijman/arduino-lmic/blob/master/examples/ttn-otaa/
|
||||
|
||||
and it's fork
|
||||
|
||||
LoraWAN-in-C library, adapted to run under the Arduino environment
|
||||
https://github.com/jpmeijers/arduino-lmic
|
||||
|
||||
under this Licence:
|
||||
|
||||
"License
|
||||
|
@ -69,7 +69,9 @@ For the LoPy/LoPy4 the original Pycom firmware is not needed here, so there is n
|
||||
|
||||
Note: If you use this software you do this at your own risk. That means that you alone - not the authors of this software - are responsible for the legal compliance of an application using this or build from this software and/or usage of a device created using this software. You should take special care and get prior legal advice if you plan metering passengers in public areas and/or publish data drawn from doing so.
|
||||
|
||||
Disclosure: The Paxcounter code stores scanned MAC adresses in the device's RAM, and keeps it in RAM temporary for a configurable scan cycle time (default 240 seconds). After each scan cycle the collected MAC data is erased from RAM. MAC data never is transferred to the LoRaWAN network. No kind of tracking and no persistent storing of MAC data or timestamps on the device and no other kind of analytics than counting is implemented in this code. Wireless networks are not touched by this code, but MAC adresses from wireless devices as well within as not within wireless networks, regardless if encrypted or unencrypted, are made visible and scanned by this code. The same applies to Bluetooth MACs, if the bluetooth option in the code is enabled.
|
||||
# Privacy disclosure
|
||||
|
||||
Paxcounter generates identifiers for sniffed MAC adresses and collects them temporary in the device's RAM for a configurable scan cycle time (default 240 seconds). After each scan cycle the collected identifiers are cleared. Identifiers are generated by salting and hashing MAC adresses. The random salt value changes after each scan cycle. Identifiers and MAC adresses are never transferred to the LoRaWAN network. No persistent storing of MAC adresses, identifiers or timestamps and no other kind of analytics than counting are implemented in this code. Wireless networks are not touched by this code, but MAC adresses from wireless devices as well within as not within wireless networks, regardless if encrypted or unencrypted, are sniffed and processed by this code. If the bluetooth option in the code is enabled, bluetooth MACs are scanned and processed by the included BLE stack, and counted by this code.
|
||||
|
||||
# Payload format description
|
||||
|
||||
|
@ -10,9 +10,9 @@
|
||||
|
||||
; ---> SELECT TARGET PLATFORM HERE! <---
|
||||
[platformio]
|
||||
env_default = heltec_wifi_lora_32
|
||||
;env_default = heltec_wifi_lora_32
|
||||
;env_default = ttgov1
|
||||
;env_default = ttgov2
|
||||
env_default = ttgov2
|
||||
;env_default = lopy
|
||||
;env_default = lopy4
|
||||
;env_default = lolin32lite_lora
|
||||
@ -70,7 +70,9 @@ board = esp32dev
|
||||
framework = arduino
|
||||
monitor_baud = 115200
|
||||
upload_speed = 921600
|
||||
lib_deps = U8g2
|
||||
lib_deps =
|
||||
U8g2
|
||||
ESP32 BLE Arduino@>=0.4.9
|
||||
build_flags =
|
||||
;set log level, we need build_flag for this, otherwise we can't use ESP_LOGx in arduino framework
|
||||
-DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_VERBOSE
|
||||
|
@ -27,6 +27,6 @@ void BLECount() {
|
||||
u8x8.clearLine(3);
|
||||
u8x8.setCursor(0,3);
|
||||
blenum=foundDevices.getCount();
|
||||
u8x8.printf("BLE#: %4i",blenum);
|
||||
u8x8.printf("BLE#: %-5i",blenum);
|
||||
}
|
||||
#endif
|
@ -12,7 +12,6 @@
|
||||
#include <hal/hal.h>
|
||||
|
||||
// Struct holding devices's runtime configuration
|
||||
|
||||
typedef struct {
|
||||
int8_t lorasf; // 7-12, lora spreadfactor
|
||||
int8_t txpower; // 2-15, lora tx power
|
||||
@ -33,9 +32,10 @@ extern configData_t cfg;
|
||||
extern uint8_t mydata[];
|
||||
extern uint64_t uptimecounter;
|
||||
extern osjob_t sendjob;
|
||||
extern int macnum, blenum, countermode, screensaver, adrmode, lorasf, txpower, rlim;
|
||||
extern uint16_t macnum, blenum, salt;
|
||||
extern int countermode, screensaver, adrmode, lorasf, txpower, rlim;
|
||||
extern bool joinstate;
|
||||
extern std::set<uint64_t, std::greater <uint64_t> > macs;
|
||||
extern std::set<uint16_t> macs;
|
||||
|
||||
#ifdef HAS_DISPLAY
|
||||
extern HAS_DISPLAY u8x8;
|
||||
|
@ -79,10 +79,10 @@ void printKeys(void) {
|
||||
#endif // VERBOSE
|
||||
|
||||
void do_send(osjob_t* j){
|
||||
mydata[0] = (macnum & 0x0000ff00) >> 8;
|
||||
mydata[1] = macnum & 0x000000ff;
|
||||
mydata[2] = (blenum & 0x0000ff00) >> 8;
|
||||
mydata[3] = blenum & 0x000000ff;
|
||||
mydata[0] = (macnum & 0xff00) >> 8;
|
||||
mydata[1] = macnum & 0x00ff;
|
||||
mydata[2] = (blenum & 0xff00) >> 8;
|
||||
mydata[3] = blenum & 0x00ff;
|
||||
|
||||
// Check if there is not a current TX/RX job running
|
||||
if (LMIC.opmode & OP_TXRXPEND) {
|
||||
|
55
src/main.cpp
55
src/main.cpp
@ -25,9 +25,6 @@ Refer to LICENSE.txt file in repository for more details.
|
||||
#include "main.h"
|
||||
#include "globals.h"
|
||||
|
||||
// std::set for unified array functions
|
||||
#include <set>
|
||||
|
||||
// OLED driver
|
||||
#include <U8x8lib.h>
|
||||
|
||||
@ -45,11 +42,11 @@ configData_t cfg; // struct holds current device configuration
|
||||
osjob_t sendjob, initjob; // LMIC
|
||||
|
||||
// Initialize global variables
|
||||
int macnum = 0, blenum = 0;
|
||||
uint16_t macnum = 0, blenum = 0, salt;
|
||||
uint64_t uptimecounter = 0;
|
||||
bool joinstate = false;
|
||||
|
||||
std::set<uint64_t, std::greater <uint64_t> > macs; // storage holds MAC frames
|
||||
std::set<uint16_t> macs; // associative container holds filtered MAC adresses
|
||||
|
||||
// this variable will be changed in the ISR, and read in main loop
|
||||
static volatile bool ButtonTriggered = false;
|
||||
@ -70,16 +67,29 @@ void eraseConfig(void);
|
||||
void saveConfig(void);
|
||||
void loadConfig(void);
|
||||
|
||||
|
||||
/* begin LMIC specific parts ------------------------------------------------------------ */
|
||||
|
||||
// LMIC enhanced Pin mapping
|
||||
const lmic_pinmap lmic_pins = {
|
||||
.mosi = PIN_SPI_MOSI,
|
||||
.miso = PIN_SPI_MISO,
|
||||
.sck = PIN_SPI_SCK,
|
||||
.nss = PIN_SPI_SS,
|
||||
.rxtx = LMIC_UNUSED_PIN,
|
||||
.rst = RST,
|
||||
.dio = {DIO0, DIO1, DIO2}
|
||||
};
|
||||
|
||||
// defined in lorawan.cpp
|
||||
void gen_lora_deveui(uint8_t * pdeveui);
|
||||
void RevBytes(unsigned char* b, size_t c);
|
||||
|
||||
#ifdef VERBOSE
|
||||
void printKeys(void);
|
||||
#endif // VERBOSE
|
||||
#endif
|
||||
|
||||
// LMIC functions
|
||||
void onEvent(ev_t ev);
|
||||
void do_send(osjob_t* j);
|
||||
|
||||
// LMIC callback functions
|
||||
void os_getDevKey (u1_t *buf) {
|
||||
@ -102,21 +112,6 @@ void os_getDevEui (u1_t* buf) {
|
||||
gen_lora_deveui(buf); // generate DEVEUI from device's MAC
|
||||
}
|
||||
|
||||
// LMIC enhanced Pin mapping
|
||||
const lmic_pinmap lmic_pins = {
|
||||
.mosi = PIN_SPI_MOSI,
|
||||
.miso = PIN_SPI_MISO,
|
||||
.sck = PIN_SPI_SCK,
|
||||
.nss = PIN_SPI_SS,
|
||||
.rxtx = LMIC_UNUSED_PIN,
|
||||
.rst = RST,
|
||||
.dio = {DIO0, DIO1, DIO2}
|
||||
};
|
||||
|
||||
// LMIC functions
|
||||
void onEvent(ev_t ev);
|
||||
void do_send(osjob_t* j);
|
||||
|
||||
// LoRaWAN Initjob
|
||||
static void lora_init (osjob_t* j) {
|
||||
// reset MAC state
|
||||
@ -208,20 +203,21 @@ void wifi_sniffer_loop(void * pvParameters) {
|
||||
|
||||
// execute BLE count if BLE function is enabled
|
||||
#ifdef BLECOUNTER
|
||||
if ( cfg.blescan )
|
||||
if (cfg.blescan)
|
||||
BLECount();
|
||||
#endif
|
||||
|
||||
// Prepare and execute LoRaWAN data upload
|
||||
u8x8.setCursor(0,4);
|
||||
u8x8.printf("MAC#: %4i", macnum);
|
||||
u8x8.printf("MAC#: %-5i", macnum);
|
||||
do_send(&sendjob); // send payload
|
||||
vTaskDelay(500/portTICK_PERIOD_MS);
|
||||
yield();
|
||||
|
||||
// clear counter if not in cumulative counter mode
|
||||
if ( cfg.countermode != 1 ) {
|
||||
macs.erase(macs.begin(), macs.end()); // clear RAM
|
||||
if (cfg.countermode != 1) {
|
||||
macs.clear(); // clear macs container
|
||||
salt = random(65536); // get new 16bit random for salting hashes
|
||||
macnum = 0;
|
||||
u8x8.clearLine(0); u8x8.clearLine(1); // clear Display counter
|
||||
}
|
||||
@ -384,11 +380,14 @@ void setup() {
|
||||
antenna_init();
|
||||
#endif
|
||||
|
||||
// initialize salt value using esp_random() called by random in arduino-esp32 core
|
||||
salt = random(65536); // get new 16bit random for salting hashes
|
||||
|
||||
// initialize display
|
||||
init_display(PROGNAME, PROGVERSION);
|
||||
u8x8.setPowerSave(!cfg.screenon); // set display off if disabled
|
||||
u8x8.setCursor(0,5);
|
||||
u8x8.printf(!cfg.rssilimit ? "RLIM: off" : "RLIM: %4i", cfg.rssilimit);
|
||||
u8x8.printf(!cfg.rssilimit ? "RLIM: off" : "RLIM: %4i", cfg.rssilimit);
|
||||
u8x8.drawString(0,6,"Join Wait ");
|
||||
|
||||
// output LoRaWAN keys to console
|
||||
|
@ -1,5 +1,5 @@
|
||||
// program version
|
||||
#define PROGVERSION "1.2.5" // use max 10 chars here!
|
||||
#define PROGVERSION "1.2.62" // use max 10 chars here!
|
||||
#define PROGNAME "PAXCNT"
|
||||
|
||||
// Verbose enables serial output
|
||||
@ -16,8 +16,10 @@
|
||||
#define SEND_SECS 120 // [seconds/2] -> 240 sec.
|
||||
|
||||
// WiFi sniffer config
|
||||
#define WIFI_CHANNEL_MAX 13
|
||||
#define WIFI_CHANNEL_SWITCH_INTERVAL 50 // [seconds/100] -> 0,5 sec.
|
||||
#define WIFI_CHANNEL_MIN 1 // start channel number where scan begings
|
||||
#define WIFI_CHANNEL_MAX 13 // total channel number to scan
|
||||
#define WIFI_MY_COUNTRY "EU" // for Wifi RF settings
|
||||
#define WIFI_CHANNEL_SWITCH_INTERVAL 50 // [seconds/100] -> 0,5 sec.
|
||||
|
||||
// Default LoRa Spreadfactor
|
||||
#define LORASFDEFAULT 9 // 7 ... 12
|
||||
|
@ -67,8 +67,9 @@ void set_reset(int val) {
|
||||
break;
|
||||
case 1: // reset MAC counter
|
||||
ESP_LOGI(TAG, "Remote command: reset MAC counter");
|
||||
macs.erase(macs.begin(), macs.end()); // clear RAM
|
||||
macs.clear(); // clear macs container
|
||||
macnum = 0;
|
||||
salt = random(65536); // get new 16bit random for salting hashes
|
||||
u8x8.clearLine(0); u8x8.clearLine(1); // clear Display counter
|
||||
u8x8.clearLine(5);
|
||||
u8x8.setCursor(0, 5);
|
||||
|
83
src/rokkithash.cpp
Normal file
83
src/rokkithash.cpp
Normal file
@ -0,0 +1,83 @@
|
||||
/*
|
||||
* RokkitHash - Arduino port for Paul Hsieh's "SuperFastHash"
|
||||
*
|
||||
* A very quick hash function, (c) Paul Hsieh
|
||||
*
|
||||
* See http://www.azillionmonkeys.com/qed/hash.html for more information
|
||||
* about its inner workings
|
||||
*
|
||||
* - Initial Arduino version: 2014 Alex K
|
||||
* - 8-bit improvements: robtillaart
|
||||
* - Current maintainer: SukkoPera <software@sukkology.net>
|
||||
*
|
||||
* See http://forum.arduino.cc/index.php?topic=226686.0 for some talk
|
||||
* about the various improvements.
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining
|
||||
* a copy of this software and associated documentation files (the
|
||||
* "Software"), to deal in the Software without restriction, including
|
||||
* without limitation the rights to use, copy, modify, merge, publish,
|
||||
* distribute, sublicense, and/or sell copies of the Software, and to
|
||||
* permit persons to whom the Software is furnished to do so, subject to
|
||||
* the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
||||
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
|
||||
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
|
||||
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
|
||||
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
||||
* SOFTWARE.
|
||||
*/
|
||||
|
||||
#include <inttypes.h>
|
||||
|
||||
uint32_t rokkit(const char * data, int len) {
|
||||
uint32_t hash, tmp;
|
||||
int rem;
|
||||
|
||||
if (len <= 0 || data == 0) return 0;
|
||||
hash = len;
|
||||
rem = len & 3;
|
||||
len >>= 2;
|
||||
|
||||
/* Main loop */
|
||||
while (len > 0) {
|
||||
hash += *((uint16_t*)data);
|
||||
tmp = (*((uint16_t*)(data+2)) << 11) ^ hash;
|
||||
hash = (hash << 16) ^ tmp;
|
||||
data += 2*2;
|
||||
hash += hash >> 11;
|
||||
len--;
|
||||
}
|
||||
|
||||
/* Handle end cases */
|
||||
switch (rem) {
|
||||
case 3: hash += *((uint16_t*)data);
|
||||
hash ^= hash << 16;
|
||||
hash ^= ((signed char)data[2]) << 18;
|
||||
hash += hash >> 11;
|
||||
break;
|
||||
case 2: hash += *((uint16_t*)data);
|
||||
hash ^= hash << 11;
|
||||
hash += hash >> 17;
|
||||
break;
|
||||
case 1: hash += (signed char)*data;
|
||||
hash ^= hash << 10;
|
||||
hash += hash >> 1;
|
||||
}
|
||||
|
||||
/* Force "avalanching" of final 127 bits */
|
||||
hash ^= hash << 3;
|
||||
hash += hash >> 5;
|
||||
hash ^= hash << 4;
|
||||
hash += hash >> 17;
|
||||
hash ^= hash << 25;
|
||||
hash += hash >> 6;
|
||||
|
||||
return hash;
|
||||
}
|
@ -14,7 +14,10 @@
|
||||
// Local logging tag
|
||||
static const char *TAG = "wifisniffer";
|
||||
|
||||
static wifi_country_t wifi_country = {.cc="EU", .schan=1, .nchan=13, .policy=WIFI_COUNTRY_POLICY_AUTO};
|
||||
// function defined in rokkithash.cpp
|
||||
uint32_t rokkit(const char * , int );
|
||||
|
||||
static wifi_country_t wifi_country = {.cc=WIFI_MY_COUNTRY, .schan=WIFI_CHANNEL_MIN, .nchan=WIFI_CHANNEL_MAX, .policy=WIFI_COUNTRY_POLICY_MANUAL};
|
||||
|
||||
typedef struct {
|
||||
unsigned frame_ctrl:16;
|
||||
@ -37,17 +40,15 @@ extern void wifi_sniffer_packet_handler(void *buff, wifi_promiscuous_pkt_type_t
|
||||
|
||||
void wifi_sniffer_init(void) {
|
||||
wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
|
||||
cfg.nvs_enable = 0; // we don't want wifi settings from NVRAM
|
||||
ESP_ERROR_CHECK(esp_wifi_init(&cfg));
|
||||
ESP_ERROR_CHECK(esp_wifi_set_country(&wifi_country));
|
||||
ESP_ERROR_CHECK(esp_wifi_set_storage(WIFI_STORAGE_RAM) );
|
||||
ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_NULL) );
|
||||
//ESP_ERROR_CHECK(esp_wifi_start()); // not sure if we need this in this application?
|
||||
//ESP_ERROR_CHECK(esp_wifi_set_max_tx_power(-128)); // we don't need to TX, so we use lowest power level to save energy
|
||||
wifi_promiscuous_filter_t filter = {.filter_mask = WIFI_PROMIS_FILTER_MASK_MGMT}; // we need only MGMT frames
|
||||
ESP_ERROR_CHECK(esp_wifi_set_promiscuous_filter(&filter)); // set MAC frame filter
|
||||
cfg.nvs_enable = 0; // we don't need any wifi settings from NVRAM
|
||||
wifi_promiscuous_filter_t filter = {.filter_mask = WIFI_PROMIS_FILTER_MASK_MGMT}; // we need only MGMT frames
|
||||
ESP_ERROR_CHECK(esp_wifi_init(&cfg)); // configure Wifi with cfg
|
||||
ESP_ERROR_CHECK(esp_wifi_set_country(&wifi_country)); // set locales for RF and channels
|
||||
ESP_ERROR_CHECK(esp_wifi_set_storage(WIFI_STORAGE_RAM)); // we don't need NVRAM
|
||||
ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_NULL));
|
||||
ESP_ERROR_CHECK(esp_wifi_set_promiscuous_filter(&filter)); // set MAC frame filter
|
||||
ESP_ERROR_CHECK(esp_wifi_set_promiscuous_rx_cb(&wifi_sniffer_packet_handler));
|
||||
ESP_ERROR_CHECK(esp_wifi_set_promiscuous(true));
|
||||
ESP_ERROR_CHECK(esp_wifi_set_promiscuous(true)); // now switch on monitor mode
|
||||
}
|
||||
|
||||
void wifi_sniffer_set_channel(uint8_t channel) {
|
||||
@ -58,36 +59,40 @@ void wifi_sniffer_packet_handler(void* buff, wifi_promiscuous_pkt_type_t type) {
|
||||
const wifi_promiscuous_pkt_t *ppkt = (wifi_promiscuous_pkt_t *)buff;
|
||||
const wifi_ieee80211_packet_t *ipkt = (wifi_ieee80211_packet_t *)ppkt->payload;
|
||||
const wifi_ieee80211_mac_hdr_t *hdr = &ipkt->hdr;
|
||||
char counter [10];
|
||||
char counter [6]; // uint16_t -> 2 byte -> 5 decimals + '0' terminator -> 6 chars
|
||||
char macbuf [21]; // uint64_t -> 8 byte -> 20 decimals + '0' terminator -> 21 chars
|
||||
uint64_t addr2int;
|
||||
uint32_t vendor2int;
|
||||
uint16_t hashedmac;
|
||||
std::pair<std::set<uint16_t>::iterator, bool> newmac;
|
||||
|
||||
if (( cfg.rssilimit == 0 ) || (ppkt->rx_ctrl.rssi > cfg.rssilimit )) { // rssi is negative value
|
||||
uint64_t addr2int = ( (uint64_t)hdr->addr2[0] ) | ( (uint64_t)hdr->addr2[1] << 8 ) | ( (uint64_t)hdr->addr2[2] << 16 ) | \
|
||||
addr2int = ( (uint64_t)hdr->addr2[0] ) | ( (uint64_t)hdr->addr2[1] << 8 ) | ( (uint64_t)hdr->addr2[2] << 16 ) | \
|
||||
( (uint64_t)hdr->addr2[3] << 24 ) | ( (uint64_t)hdr->addr2[4] << 32 ) | ( (uint64_t)hdr->addr2[5] << 40 );
|
||||
|
||||
#ifdef VENDORFILTER
|
||||
uint32_t vendor2int = ( (uint32_t)hdr->addr2[2] ) | ( (uint32_t)hdr->addr2[1] << 8 ) | ( (uint32_t)hdr->addr2[0] << 16 );
|
||||
|
||||
#ifdef VENDORFILTER // uses vendor array with prefiltered OUIs (no local nd no group MACs, bits 0+1 in 1st byte of OUI)
|
||||
vendor2int = ( (uint32_t)hdr->addr2[2] ) | ( (uint32_t)hdr->addr2[1] << 8 ) | ( (uint32_t)hdr->addr2[0] << 16 );
|
||||
if ( std::find(vendors.begin(), vendors.end(), vendor2int) != vendors.end() ) {
|
||||
#endif
|
||||
macs.insert(addr2int);
|
||||
// salt and hash MAC, and if new unique one, store identifier in container and increment counter on display
|
||||
// https://en.wikipedia.org/wiki/MAC_Address_Anonymization
|
||||
|
||||
// INFO: RSSI when adding MAC
|
||||
ESP_LOGI(TAG, "WiFi RSSI: %02d", ppkt->rx_ctrl.rssi);
|
||||
|
||||
// if new unique MAC logged increment counter on display
|
||||
if ( macs.size() > macnum ) {
|
||||
macnum = macs.size();
|
||||
itoa(macnum, counter, 10);
|
||||
addr2int |= (uint64_t) salt << 48; // prepend 12 bit salt to 48 bit MAC
|
||||
itoa(addr2int, macbuf, 10); // convert 64 bit MAC to base 10 decimal string
|
||||
hashedmac = rokkit(macbuf, 5); // hash MAC, use 5 chars to fit hash in uint16_t container
|
||||
newmac = macs.insert(hashedmac); // store hashed MAC if new unique
|
||||
if (newmac.second) { // first time seen MAC
|
||||
macnum++; // increment MAC counter
|
||||
itoa(macnum, counter, 10); // base 10 decimal counter value
|
||||
u8x8.draw2x2String(0, 0, counter);
|
||||
ESP_LOGI(TAG, "MAC counter: %4i", macnum);
|
||||
ESP_LOGI(TAG, "#%05i: RSSI %04d -> Salt %04x -> Hash %04x", macnum, ppkt->rx_ctrl.rssi, salt, hashedmac);
|
||||
}
|
||||
|
||||
|
||||
#ifdef VENDORFILTER
|
||||
}
|
||||
#endif
|
||||
} else {
|
||||
ESP_LOGI(TAG, "Ignoring RSSI %02d (limit: %i)", ppkt->rx_ctrl.rssi, cfg.rssilimit );
|
||||
}
|
||||
} else
|
||||
ESP_LOGI(TAG, "RSSI %04d -> ignoring (limit: %i)", ppkt->rx_ctrl.rssi, cfg.rssilimit);
|
||||
|
||||
yield();
|
||||
}
|
||||
|
Loading…
Reference in New Issue
Block a user