payload encoder and readme.md updated

README.md

@@ -121,26 +121,46 @@ If you're using [TheThingsNetwork](https://www.thethingsnetwork.org/) (TTN) you
 
 To track a paxcounter device with on board GPS and at the same time contribute to TTN coverage mapping, you simply activate the [TTNmapper integration](https://www.thethingsnetwork.org/docs/applications/ttnmapper/) in TTN Console. The formats *plain* and *packed* generate the fields `latitude`, `longitude` and `hdop` required by ttnmapper.
 
-Hereafter described is the default *plain* format.
+Hereafter described is the default *plain* format, which uses MSB bit numbering.
 
-**LoRaWAN Port #1:**
-
-	Paxcounter data
+**Port #1:** Paxcount data
 
 	byte 1-2:	Number of unique pax, first seen on Wifi
 	byte 3-4:	Number of unique pax, first seen on Bluetooth [0 if BT disabled]
+	bytes 5-18: GPS data (only, if GPS is present and has a fix) format see Port #4
 
-	GPS data (only, if GPS is present and has a fix)
+**Port #2:** Device status query result
 
-	bytes 5-8:	GPS latitude
-	bytes 9-12:	GPS longitude
-	bytes 13-14:	GPS number of satellites
-	bytes 15-16:	GPS HDOP
-	bytes 17-18:	GPS altitude [meter]
+  	byte 1-2:	Voltage [mV]
+	byte 3-11:	Uptime [seconds]
+	bytes 12-16: CPU temperate [°C]
 
-**LoRaWAN Port #2:**
+**Port #3:** Device configuration query result
+
+	byte 1: LoRa spread factor
+	byte 2:	ADR mode on/off
+	byte 3:	Screensaver on/off
+	byte 4:	Display on/off
+	byte 5:	Counter mode
+	bytes 6-7: RSSI limit
+	byte 8: Payload send cycle
+	byte 9: Wifi channel switch cycle
+	byte 10: Bluetooth scan duration
+	byte 11: Bluetooth scanning on/off
+	byte 12: Wifi antenna internal/external
+	byte 13: Vendortfilter on/off
+	byte 14: RGB Led luminosity [%]
+	byte 15: GPS data on/off
+	bytes 16-26: Software version in ASCII
+
+**Port #4:** GPS query result
+
+	bytes 1-4:	GPS latitude
+	bytes 5-8:	GPS longitude
+	bytes 9-10:	GPS number of satellites
+	bytes 11-12:	GPS HDOP
+	bytes 13-14:	GPS altitude [meter]
 
-	- see remote control -
 
 [**plain_decoder.js**](src/TTN/plain_decoder.js)
 

src/TTN/packed_converter.js

@@ -9,12 +9,11 @@ function Converter(decoded, port) {
         converted.pax = converted.ble + converted.wifi;
     }
 
-    /*
     if (port === 2) {
         converted.voltage /= 1000;
         converted.uptime /= 60;
     }
-    */
+
 
     return converted;
 }

src/TTN/packed_decoder.js

@@ -18,15 +18,19 @@ function Decoder(bytes, port) {
 
     if (port === 2) {
         // device status data
-        if (bytes.length === 12) {
-            return decode(bytes, [uint16, uptime, temperature], ['voltage', 'uptime', 'cputemp']);
-        }
-        // device config data
-        if (bytes.length === 8) {
-            return decode(bytes, [uint8, uint16, uint8, uint8, uint8, uint8, bitmap], ['lorasf', 'rssilimit', 'sendcycle', 'wifichancycle', 'blescantime', 'rgblum', 'flags']);
-        }
+        return decode(bytes, [uint16, uptime, temperature], ['voltage', 'uptime', 'cputemp']);
     }
 
+
+    if (port === 3) {
+        // device config data      
+        return decode(bytes, [uint8, uint16, uint8, uint8, uint8, uint8, bitmap], ['lorasf', 'rssilimit', 'sendcycle', 'wifichancycle', 'blescantime', 'rgblum', 'flags']);
+    }
+
+    if (port === 4) {
+        // gps data      
+        return decode(bytes, [latLng, latLng, uint8, hdop, uint16], ['latitude', 'longitude', 'sats', 'hdop', 'altitude']);
+    }
 }
 
 

src/paxcounter.conf

@@ -41,14 +41,15 @@
 #define MEM_LOW                         2048    // [Bytes] low memory threshold triggering a send cycle
 #define RETRANSMIT_RCMD                 5       // [seconds] wait time before retransmitting rcommand results
 #define PAYLOAD_BUFFER_SIZE             51      // maximum size of payload block per transmit
-
-// Default LoRa Spreadfactor
 #define LORASFDEFAULT                   9       // 7 ... 12 SF, according to LoRaWAN specs
 #define MAXLORARETRY                    500     // maximum count of TX retries if LoRa busy
-#define PAYLOADPORT                     1       // LoRaWAN Port on which device sends counts
-#define RCMDPORT                        2       // LoRaWAN Port on which device listenes for remote commands
-#define STATUSPORT                      2       // LoRaWAN Port on which device sends remote command results
-#define GPSPORT                         3       // LoRaWAN Port on which device sends gps query results
+
+// Ports on which the device sends and listenes on LoRaWAN and SPI
+#define PAYLOADPORT                     1       // Port on which device sends counts
+#define RCMDPORT                        2       // Port on which device listenes for remote commands
+#define STATUSPORT                      2       // Port on which device sends remote command results
+#define CONFIGPORT                      3       // Port on which device sends gps query results
+#define GPSPORT                         4       // Port on which device sends gps query results
 
 // Default RGB LED luminosity (in %)
 #define RGBLUMINOSITY                   30      // 30%

src/rcommand.cpp

@@ -273,7 +273,7 @@ void get_config(uint8_t val) {
   ESP_LOGI(TAG, "Remote command: get device configuration");
   payload.reset();
   payload.addConfig(cfg);
-  senddata(STATUSPORT);
+  senddata(CONFIGPORT);
 };
 
 void get_status(uint8_t val) {