created: usersensor, bme680 bsec, update arduino-esp32 core

src/hal/ebox.h

@@ -18,7 +18,7 @@
 #define LORA_MISO (19)
 #define LORA_MOSI (27)
 #define LORA_RST  (14)
-#define LORA_IO0  (26)
+#define LORA_IRQ  (26)
 #define LORA_IO1  (33)
 #define LORA_IO2  LMIC_UNUSED_PIN
 

src/hal/eboxtube.h

@@ -19,7 +19,7 @@
 #define LORA_MISO (19)
 #define LORA_MOSI (27)
 #define LORA_RST  (14)
-#define LORA_IO0  (26)
+#define LORA_IRQ  (26)
 #define LORA_IO1  (33)
 #define LORA_IO2  (32)
 

src/hal/fipy.h

@@ -18,7 +18,7 @@
 #define LORA_MISO (19)
 #define LORA_MOSI (27)
 #define LORA_RST  LMIC_UNUSED_PIN
-#define LORA_IO0  (23) // LoRa IRQ
+#define LORA_IRQ  (23) // LoRa IRQ
 #define LORA_IO1  (23) // Pin tied via diode to DIO0
 #define LORA_IO2  LMIC_UNUSED_PIN
 

src/hal/generic.h

@@ -15,6 +15,8 @@
 
 #define HAS_BME 0x77  // BME680 sensor on I2C bus (SDA=4/SCL=15); comment out if not present
 
+#define HAS_SENSORS 1 // comment out if device has user defined sensors
+
 #define CFG_sx1276_radio 1 // select LoRa chip
 //#define CFG_sx1272_radio 1 // select LoRa chip
 #define BOARD_HAS_PSRAM // use if board has external PSRAM
@@ -45,7 +47,7 @@
 #define LORA_MISO (19)
 #define LORA_MOSI (27)
 #define LORA_RST  (14)
-#define LORA_IO0  (26)
+#define LORA_IRQ  (26)
 #define LORA_IO1  (33)
 #define LORA_IO2  LMIC_UNUSED_PIN
 

src/hal/heltec.h

@@ -3,28 +3,24 @@
 
 #include <stdint.h>
 
-//#define HAS_BME 0x77  // BME680 sensor on I2C bus (SDI=21/SCL=22); comment out if not present
+//#define HAS_BME 0x77  // BME680 sensor on I2C bus (SDI=21/SCL=22); comment out
+//if not present
 
 // Hardware related definitions for Heltec LoRa-32 Board
-#define HAS_LORA 1       // comment out if device shall not send data via LoRa
+#define HAS_LORA 1 // comment out if device shall not send data via LoRa
 #define CFG_sx1276_radio 1
 #define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board
-#define HAS_LED (25) // white LED on board
-#define HAS_BUTTON (0) // button "PROG" on board
+#define HAS_LED (25)                                  // white LED on board
+#define HAS_BUTTON (0)                                // button "PROG" on board
 
 // Pins for I2C interface of OLED Display
 #define MY_OLED_SDA (4)
 #define MY_OLED_SCL (15)
 #define MY_OLED_RST (16)
 
-// Pins for LORA chip SPI interface, reset line and interrupt lines
-#define LORA_SCK  (5) 
-#define LORA_CS   (18)
-#define LORA_MISO (19)
-#define LORA_MOSI (27)
-#define LORA_RST  (14)
-#define LORA_IO0  (26)
-#define LORA_IO1  (33)
-#define LORA_IO2  LMIC_UNUSED_PIN
+// Pins for LORA chip SPI interface come from board file, we need some
+// additional definitions for LMIC
+#define LORA_IO1 (33)
+#define LORA_IO2 LMIC_UNUSED_PIN
 
 #endif

src/hal/heltecv2.h

@@ -17,13 +17,8 @@
 #define OLED_SCL (15)
 #define OLED_RST (16)
 
-// Pins for LORA chip SPI interface, reset line and interrupt lines
-#define LORA_SCK  (5) 
-#define LORA_CS   (18)
-#define LORA_MISO (19)
-#define LORA_MOSI (27)
-#define LORA_RST  (14)
-#define LORA_IO0  (26)
+// Pins for LORA chip SPI interface come from board file, we need some
+// additional definitions for LMIC
 #define LORA_IO1  (35)
 #define LORA_IO2  (34)
 

src/hal/lolin32litelora.h

@@ -26,7 +26,7 @@
 #define LORA_MISO (19)
 #define LORA_MOSI (27)
 #define LORA_RST  (25)
-#define LORA_IO0  (27)
+#define LORA_IRQ  (27)
 #define LORA_IO1  (26)
 #define LORA_IO2  LMIC_UNUSED_PIN
 

src/hal/lolin32lora.h

@@ -27,7 +27,7 @@
 #define LORA_MISO (19)
 #define LORA_MOSI (27)
 #define LORA_RST  (25)
-#define LORA_IO0  (27)
+#define LORA_IRQ  (27)
 #define LORA_IO1  (26)
 #define LORA_IO2  LMIC_UNUSED_PIN
 #define LORA_IO5  LMIC_UNUSED_PIN

src/hal/lopy.h

@@ -16,7 +16,7 @@
 #define LORA_MISO (19) // GPIO19 - SX1276 MISO
 #define LORA_MOSI (27) // GPIO27 - SX1276 MOSI
 #define LORA_RST  (18) // GPIO18 - SX1276 RESET
-#define LORA_IO0  (23) // LoRa IRQ
+#define LORA_IRQ  (23) // LoRa IRQ
 #define LORA_IO1  (23) // Pin tied via diode to DIO0
 #define LORA_IO2  (23) // Pin tied via diode to DIO0
 

src/hal/lopy4.h

@@ -25,7 +25,7 @@
 #define LORA_MISO (19)
 #define LORA_MOSI (27)
 #define LORA_RST  LMIC_UNUSED_PIN
-#define LORA_IO0  (23) // LoRa IRQ
+#define LORA_IRQ  (23) // LoRa IRQ
 #define LORA_IO1  (23) // Pin tied via diode to DIO0
 #define LORA_IO2  (23) // Pin tied via diode to DIO0
 

src/hal/octopus32.h

@@ -27,7 +27,7 @@
 #define LORA_MISO (19)
 #define LORA_MOSI (18)
 #define LORA_RST  LMIC_UNUSED_PIN
-#define LORA_IO0  (33)
+#define LORA_IRQ  (33)
 #define LORA_IO1  (33)
 #define LORA_IO2  LMIC_UNUSED_PIN
 

src/hal/ttgobeam.h

@@ -24,7 +24,7 @@
 #define LORA_MISO (19)
 #define LORA_MOSI (27)
 #define LORA_RST   LMIC_UNUSED_PIN
-#define LORA_IO0  (26)
+#define LORA_IRQ  (26)
 #define LORA_IO1  (32) // !! NEEDS EXTERNAL WIRING !!
 //#define LORA_IO1  (33)  // for T-Beam T22_V05 and T22_V07, other versions may need external wiring
 #define LORA_IO2  LMIC_UNUSED_PIN

src/hal/ttgov1.h

@@ -25,7 +25,7 @@
 #define LORA_MISO (19)
 #define LORA_MOSI (27)
 #define LORA_RST  (14)
-#define LORA_IO0  (26)
+#define LORA_IRQ  (26)
 #define LORA_IO1  (33)
 #define LORA_IO2  LMIC_UNUSED_PIN
 

src/hal/ttgov2.h

@@ -26,7 +26,7 @@
 #define LORA_MISO (19)
 #define LORA_MOSI (27)
 #define LORA_RST  LMIC_UNUSED_PIN
-#define LORA_IO0  (26)
+#define LORA_IRQ  (26)
 #define LORA_IO1  (33)
 #define LORA_IO2  LMIC_UNUSED_PIN
 

src/hal/ttgov21new.h

@@ -29,7 +29,7 @@
 #define LORA_MISO (19)
 #define LORA_MOSI (27)
 #define LORA_RST  (23)
-#define LORA_IO0  (26)
+#define LORA_IRQ  (26)
 #define LORA_IO1  (33)
 #define LORA_IO2  (32)
 

src/hal/ttgov21old.h

@@ -30,7 +30,7 @@
 #define LORA_MISO (19)
 #define LORA_MOSI (27)
 #define LORA_RST  LMIC_UNUSED_PIN
-#define LORA_IO0  (26)
+#define LORA_IRQ  (26)
 #define LORA_IO1  (33)
 #define LORA_IO2  (32)