DigitalInfinity/ESP32-PaxCounter
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

heltecv2.h added; edits in lopy.h and lopy4.h

Browse Source
This commit is contained in:
Klaus K Wilting 2018-10-06 21:37:27 +02:00
parent aa00cb896e
commit 464db72198
3 changed files with 30 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

26
src/hal/heltecv2.h Normal file
View File

@ -0,0 +1,26 @@
// Hardware related definitions for Heltec V2 LoRa-32 Board
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
#define HAS_SPI 1 // comment out if device shall not send data via SPI
#define CFG_sx1276_radio 1
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board
#define HAS_LED GPIO_NUM_25 // white LED on board
#define HAS_BUTTON GPIO_NUM_0 // button "PROG" on board
// re-define pin definitions of pins_arduino.h
#define PIN_SPI_SS GPIO_NUM_18 // ESP32 GPIO18 -- SX1276 NSS (Pin19) SPI Chip Select Input
#define PIN_SPI_MOSI GPIO_NUM_27 // ESP32 GPIO27 -- SX1276 MOSI (Pin18) SPI Data Input
#define PIN_SPI_MISO GPIO_NUM_19 // ESP32 GPIO19 -- SX1276 MISO (Pin17) SPI Data Output
#define PIN_SPI_SCK GPIO_NUM_5 // ESP32 GPIO5 -- SX1276 SCK (Pin16) SPI Clock Input
// non arduino pin definitions
#define RST GPIO_NUM_14 // ESP32 GPIO18 -- SX1276 NRESET (Pin7) Reset Trigger Input
#define DIO0 GPIO_NUM_26 // ESP32 GPIO26 -- SX1276 DIO0 (Pin8) used by LMIC for detecting LoRa RX_Done & TX_Done
#define DIO1 GPIO_NUM_34 // ESP32 GPIO33 -- SX1276 DIO1 (Pin9) used by LMIC for detecting LoRa RX_Timeout
#define DIO2 GPIO_NUM_35 // 32 ESP32 GPIO32 -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)
// Hardware pin definitions for Heltec LoRa-32 Board with OLED SSD1306 I2C Display
#define OLED_RST GPIO_NUM_16 // ESP32 GPIO16 -- SD1306 RST
#define I2C_SDA GPIO_NUM_4 // ESP32 GPIO4 -- SD1306 D1+D2
#define I2C_SCL GPIO_NUM_15 // ESP32 GPIO15 -- SD1306 D0

2
src/hal/lopy.h
View File

@ -17,7 +17,7 @@
#define DIO2 GPIO_NUM_23 // Pin tied via diode to DIO0
// select WIFI antenna (internal = onboard / external = u.fl socket)
#define HAS_ANTENNA_SWITCH 16 // pin for switching wifi antenna
#define HAS_ANTENNA_SWITCH GPIO_NUM_16 // pin for switching wifi antenna
#define WIFI_ANTENNA 0 // 0 = internal, 1 = external
// uncomment this only if your LoPy runs on a PYTRACK BOARD

6
src/hal/lopy4.h
View File

@ -4,7 +4,7 @@
#define HAS_SPI 1 // comment out if device shall not send data via SPI
#define CFG_sx1276_radio 1
//#define HAS_LED NOT_A_PIN // LoPy4 has no on board mono LED, we use on board RGB LED
#define HAS_RGB_LED GPIO_NUM_0 // WS2812B RGB LED on GPIO0
#define HAS_RGB_LED GPIO_NUM_0 // WS2812B RGB LED on GPIO0 (P2)
#define BOARD_HAS_PSRAM // use extra 4MB extern RAM
// Hardware pin definitions for Pycom LoPy4 board
@ -18,8 +18,8 @@
#define DIO2 GPIO_NUM_23 // Pin tied via diode to DIO0
// select WIFI antenna (internal = onboard / external = u.fl socket)
#define HAS_ANTENNA_SWITCH 21 // pin for switching wifi antenna
#define WIFI_ANTENNA 0 // 0 = internal, 1 = external
#define HAS_ANTENNA_SWITCH GPIO_NUM_21 // pin for switching wifi antenna (P12)
#define WIFI_ANTENNA 0 // 0 = internal, 1 = external
// uncomment this only if your LoPy runs on a PYTRACK BOARD
//#define HAS_GPS 1