bugfix cfg.txpower

README.md

@@ -327,19 +327,7 @@ Note: all settings are stored in NVRAM and will be reloaded when device starts.
 
 0x06 set LoRa TXpower
 
-	0 ... 15 [default: 7]
-
-	TXPower 	Configuration
-	0 			Max EIRP (usually +16dB)
-	1 			-2dB
-	2			-4dB
-	3			-6dB
-	4			-8dB
-	5			-10dB
-	6			-12dB
-	7			-14dB
-	8 .. 14		reserved for future use (RFU)
-	15			ignored (device keeps current setting)
+	0 ... 255 desired TX power in dBm [default: 14]
 	
 0x07 set LoRa Adaptive Data Rate mode
 

platformio.ini

@@ -7,7 +7,7 @@
 
 ; ---> SELECT THE TARGET PLATFORM HERE! <---
 [board]
-;halfile = generic.h
+halfile = generic.h
 ;halfile = ebox.h
 ;halfile = eboxtube.h
 ;halfile = ecopower.h
@@ -18,7 +18,7 @@
 ;halfile = ttgov21old.h
 ;halfile = ttgov21new.h
 ;halfile = ttgofox.h
-halfile = ttgobeam.h
+;halfile = ttgobeam.h
 ;halfile = ttgobeam10.h
 ;halfile = fipy.h
 ;halfile = lopy.h
@@ -43,10 +43,10 @@ description = Paxcounter is a device for metering passenger flows in realtime. I
 
 [common]
 ; for release_version use max. 10 chars total, use any decimal format like "a.b.c"
-release_version = 1.8.3
+release_version = 1.8.31
 ; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
 ; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
-debug_level = 4
+debug_level = 3
 extra_scripts = pre:build.py
 otakeyfile = ota.conf
 lorakeyfile = loraconf.h

src/paxcounter.conf

@@ -49,7 +49,7 @@
 #define RETRANSMIT_RCMD                 5       // [seconds] wait time before retransmitting rcommand results
 #define PAYLOAD_BUFFER_SIZE             51      // maximum size of payload block per transmit
 #define LORADRDEFAULT                   5       // 0 .. 15, LoRaWAN datarate, according to regional LoRaWAN specs [default = 5]
-#define LORATXPOWDEFAULT                7       // 0 .. 15, LoRaWAN TX power [default = 7]
+#define LORATXPOWDEFAULT                7       // 0 .. 255, LoRaWAN TX power in dBm [default = 14]
 #define MAXLORARETRY                    500     // maximum count of TX retries if LoRa busy
 #define SEND_QUEUE_SIZE                 10      // maximum number of messages in payload send queue [1 = no queue]
 

src/rcommand.cpp

@@ -254,7 +254,7 @@ void set_lorapower(uint8_t val[]) {
 #if (HAS_LORA)
   // set data rate and transmit power only if we have no ADR
   if (!cfg.adrmode) {
-    cfg.txpower = val[0] & 0x0f;
+    cfg.txpower = val[0];
     ESP_LOGI(TAG, "Remote command: set LoRa TXPOWER to %d", cfg.txpower);
     LMIC_setDrTxpow(assertDR(cfg.loradr), cfg.txpower);
   } else