beacon monitor mode (experimental)
This commit is contained in:
parent
b0fa9868b1
commit
455c2c8149
14
README.md
14
README.md
@ -158,7 +158,7 @@ Hereafter described is the default *plain* format, which uses MSB bit numbering.
|
||||
byte 14: Vendorfilter mode (0=disabled, 1=enabled) [default 0]
|
||||
byte 15: RGB LED luminosity (0..100 %) [default 30]
|
||||
byte 16: GPS send data mode (1=on, 0=ff) [default 1]
|
||||
byte 17: Beacon monitor mode (1=on, 0=off) [default 0]
|
||||
byte 17: Beacon proximity alarm mode (1=on, 0=off) [default 0]
|
||||
bytes 18-28: Software version (ASCII format, terminating with zero)
|
||||
|
||||
|
||||
@ -174,10 +174,10 @@ Hereafter described is the default *plain* format, which uses MSB bit numbering.
|
||||
|
||||
byte 1: static value 0x01
|
||||
|
||||
**Port #6:** Beacon monitor alarm
|
||||
**Port #6:** Beacon proximity alarm
|
||||
|
||||
byte 1: Beacon RSSI reception level
|
||||
byte 2: Beacon identifier
|
||||
byte 2: Beacon identifier (0..254)
|
||||
|
||||
|
||||
[**plain_decoder.js**](src/TTN/plain_decoder.js)
|
||||
@ -311,15 +311,15 @@ Note: all settings are stored in NVRAM and will be reloaded when device starts.
|
||||
0 ... 100 percentage of luminosity (100% = full light)
|
||||
e.g. 50 -> 50% of luminosity [default]
|
||||
|
||||
0x11 set beacon monitor mode on/off
|
||||
0x11 set beacon proximity alarm mode on/off
|
||||
|
||||
0 = Beacon monitor mode off [default]
|
||||
1 = Beacon monitor mode on, enables proximity alarm if test beacons are seen
|
||||
|
||||
0x12 set or reset a beacon MAC
|
||||
0x12 set or reset a beacon MAC for proximity alarm
|
||||
|
||||
byte 1 = beacon ID (0..255)
|
||||
bytes 2..9 = beacon MAC
|
||||
byte 1 = beacon ID (0..254)
|
||||
bytes 2..7 = beacon MAC with 6 digits (e.g. MAC 80:ab:00:01:02:03 -> 0x80ab00010203)
|
||||
|
||||
0x80 get device configuration
|
||||
|
||||
|
@ -174,12 +174,12 @@ void set_gps(uint8_t val[]) {
|
||||
};
|
||||
|
||||
void set_beacon(uint8_t val[]) {
|
||||
if ( (sizeof(*val) / sizeof(val[0]) == 9) && (val[0] <= 0xff ) ) {
|
||||
if ( (sizeof(*val) / sizeof(val[0]) == 7) && (val[0] <= 0xff ) ) {
|
||||
uint8_t id = val[0]; // use first parameter as beacon storage id
|
||||
memmove(val, val + 1, 8); // strip off storage id
|
||||
memmove(val, val + 1, 6); // strip off storage id
|
||||
beacons[id] = macConvert(val); // store beacon MAC in array
|
||||
ESP_LOGI(TAG, "Remote command: set beacon ID#%d", id);
|
||||
printKey("MAC", val, 8, false); // show beacon MAC
|
||||
printKey("MAC", val, 6, false); // show beacon MAC
|
||||
} else
|
||||
ESP_LOGW(TAG, "Remote command: set beacon called with invalid parameters");
|
||||
};
|
||||
|
Loading…
Reference in New Issue
Block a user