This commit is contained in:
Klaus K Wilting 2018-10-06 21:37:33 +02:00
commit 42172596e8
2 changed files with 58 additions and 1 deletions

View File

@ -20,6 +20,7 @@ env_default = generic
;env_default = lolin32litelora ;env_default = lolin32litelora
;env_default = lolin32lora ;env_default = lolin32lora
;env_default = lolin32lite ;env_default = lolin32lite
;env_default = octopus32
;env_default = ebox, heltec, ttgobeam, lopy4, lopy, ttgov21old, ttgov21new ;env_default = ebox, heltec, ttgobeam, lopy4, lopy, ttgov21old, ttgov21new
; ;
description = Paxcounter is a proof-of-concept ESP32 device for metering passenger flows in realtime. It counts how many mobile devices are around. description = Paxcounter is a proof-of-concept ESP32 device for metering passenger flows in realtime. It counts how many mobile devices are around.
@ -255,6 +256,21 @@ upload_protocol = ${common.upload_protocol}
extra_scripts = ${common.extra_scripts} extra_scripts = ${common.extra_scripts}
monitor_speed = ${common.monitor_speed} monitor_speed = ${common.monitor_speed}
[env:octopus32]
platform = ${common.platform_espressif32}
framework = arduino
board = esp32dev
board_build.partitions = ${common.board_build.partitions}
upload_speed = 921600
lib_deps =
${common.lib_deps_all}
${common.lib_deps_rgbled}
build_flags =
${common.build_flags}
upload_protocol = ${common.upload_protocol}
extra_scripts = ${common.extra_scripts}
monitor_speed = ${common.monitor_speed}
[env:generic] [env:generic]
platform = ${common.platform_espressif32} platform = ${common.platform_espressif32}
framework = arduino framework = arduino
@ -270,4 +286,4 @@ build_flags =
${common.build_flags} ${common.build_flags}
upload_protocol = ${common.upload_protocol} upload_protocol = ${common.upload_protocol}
extra_scripts = ${common.extra_scripts} extra_scripts = ${common.extra_scripts}
monitor_speed = ${common.monitor_speed} monitor_speed = ${common.monitor_speed}

41
src/hal/octopus32.h Normal file
View File

@ -0,0 +1,41 @@
// Hardware related definitions for #IoT Octopus32 with the Adafruit LoRaWAN Wing
// You can use this configuration also with the Adafruit ESP32 Feather + the LoRaWAN Wing
// In this config we use the Adafruit OLED Wing which is only 128x32 pixel, need to find a smaller font
// disable brownout detection (avoid unexpected reset on some boards)
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
#define HAS_LED 13 // ESP32 GPIO12 (pin22) On Board LED
#define LED_ACTIVE_LOW 1 // Onboard LED is active when pin is LOW
//#define HAS_RGB_LED 13 // ESP32 GPIO13 (pin13) On Board Shield WS2812B RGB LED
//#define HAS_BUTTON 15 // ESP32 GPIO15 (pin15) Button is on the LoraNode32 shield
//#define BUTTON_PULLUP 1 // Button need pullup instead of default pulldown
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
#define HAS_SPI 1 // comment out if device shall not send data via SPI
#define CFG_sx1276_radio 1 // RFM95 module
// re-define pin definitions of pins_arduino.h
#define PIN_SPI_SS 14 //14 // ESP32 GPIO5 (Pin5) -- SX1276 NSS (Pin19) SPI Chip Select Input
#define PIN_SPI_MOSI 18 // ESP32 GPIO23 (Pin23) -- SX1276 MOSI (Pin18) SPI Data Input
#define PIN_SPI_MISO 19 // ESP32 GPIO19 (Pin19) -- SX1276 MISO (Pin17) SPI Data Output
#define PIN_SPI_SCK 5 // ESP32 GPIO18 (Pin18) -- SX1276 SCK (Pin16) SPI Clock Input
//GPIO_NUM_
// non arduino pin definitions
#define RST LMIC_UNUSED_PIN // ESP32 GPIO25 (Pin25) -- SX1276 NRESET (Pin7) Reset Trigger Input
#define DIO0 33 // ESP32 GPIO27 (Pin27) -- SX1276 DIO0 (Pin8) used by LMIC for detecting LoRa RX_Done & TX_Done
#define DIO1 33 // ESP32 GPIO26 (Pin26) -- SX1276 DIO1 (Pin9) used by LMIC for detecting LoRa RX_Timeout
#define DIO2 LMIC_UNUSED_PIN // 4 ESP32 GPIO4 (Pin4) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)
#define DIO5 LMIC_UNUSED_PIN // 35 ESP32 GPIO35 (Pin35) -- SX1276 DIO5 not used by LMIC for LoRa (Timeout for FSK only)
// Hardware pin definitions for LoRaNode32 Board with OLED I2C Display
#define OLED_RST U8X8_PIN_NONE // Not reset pin
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // U8X8_SSD1306_128X32_UNIVISION_SW_I2C //
//#define DISPLAY_FLIP 1 // uncomment this for rotated display
#define I2C_SDA 23 //21 // ESP32 GPIO14 (Pin14) -- OLED SDA
#define I2C_SCL 22 //22 // ESP32 GPIO12 (Pin12) -- OLED SCL
// I2C config for Microchip 24AA02E64 DEVEUI unique address
//#define MCP_24AA02E64_I2C_ADDRESS 0x50 // I2C address for the 24AA02E64
//#define MCP_24AA02E64_MAC_ADDRESS 0xF8 // Memory adress of unique deveui 64 bits