DigitalInfinity/ESP32-PaxCounter
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

v1.3.81 merge

Browse Source
This commit is contained in:
Klaus K Wilting 2018-06-12 12:44:04 +02:00
commit 39f707583f
28 changed files with 2595 additions and 1610 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
README.md
View File

@ -172,7 +172,7 @@ function Converter(decoded, port) {
}
```
# Remote command set
# Remote control
The device listenes for remote control commands on LoRaWAN Port 2.
Each command is followed by exactly one parameter.

25
src/adcread.cpp
View File

@ -5,26 +5,25 @@
#include <driver/adc.h>
#include <esp_adc_cal.h>
#define DEFAULT_VREF \
1100 // to be done: use adc2_vref_to_gpio() to obtain a better estimate
#define DEFAULT_VREF 1100 // to be done: use adc2_vref_to_gpio() to obtain a better estimate
#define NO_OF_SAMPLES 64 // we do multisampling
// Local logging tag
static const char TAG[] = "main";
static void print_char_val_type(esp_adc_cal_value_t val_type) {
static void print_char_val_type(esp_adc_cal_value_t val_type)
{
if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP) {
ESP_LOGI(TAG,
"ADC characterization based on Two Point values stored in eFuse");
ESP_LOGI(TAG,"ADC characterization based on Two Point values stored in eFuse");
} else if (val_type == ESP_ADC_CAL_VAL_EFUSE_VREF) {
ESP_LOGI(TAG,
"ADC characterization based on reference voltage stored in eFuse");
ESP_LOGI(TAG,"ADC characterization based on reference voltage stored in eFuse");
} else {
ESP_LOGI(TAG,"ADC characterization based on default reference voltage");
}
}
uint16_t read_voltage(void) {
uint16_t read_voltage(void)
{
static const adc1_channel_t channel = HAS_BATTERY_PROBE;
static const adc_atten_t atten = ADC_ATTEN_DB_11;
static const adc_unit_t unit = ADC_UNIT_1;
@ -34,11 +33,8 @@ uint16_t read_voltage(void) {
ESP_ERROR_CHECK(adc1_config_channel_atten(channel, atten));
//calibrate ADC1
esp_adc_cal_characteristics_t *adc_chars =
(esp_adc_cal_characteristics_t *)calloc(
1, sizeof(esp_adc_cal_characteristics_t));
esp_adc_cal_value_t val_type = esp_adc_cal_characterize(
unit, atten, ADC_WIDTH_BIT_12, DEFAULT_VREF, adc_chars);
esp_adc_cal_characteristics_t *adc_chars = (esp_adc_cal_characteristics_t *) calloc(1, sizeof(esp_adc_cal_characteristics_t));
esp_adc_cal_value_t val_type = esp_adc_cal_characterize(unit, atten, ADC_WIDTH_BIT_12, DEFAULT_VREF, adc_chars);
print_char_val_type(val_type);
//multisample ADC1
@ -50,8 +46,7 @@ uint16_t read_voltage(void) {
adc_reading /= NO_OF_SAMPLES;
//Convert adc_reading to voltage in mV
uint16_t voltage =
(uint16_t)esp_adc_cal_raw_to_voltage(adc_reading, adc_chars);
uint16_t voltage = (uint16_t) esp_adc_cal_raw_to_voltage(adc_reading, adc_chars);
#ifdef BATT_FACTOR
voltage *= BATT_FACTOR;
#endif

8
src/antenna.cpp
View File

@ -1,5 +1,4 @@
/* switches wifi antenna, if board has switch to select internal and external
* antenna */
/* switches wifi antenna, if board has switch to select internal and external antenna */
#ifdef HAS_ANTENNA_SWITCH
@ -8,7 +7,10 @@
// Local logging tag
static const char TAG[] = "wifi";
typedef enum { ANTENNA_INT = 0, ANTENNA_EXT } antenna_type_t;
typedef enum {
ANTENNA_INT = 0,
ANTENNA_EXT
} antenna_type_t;
void antenna_init(void) {
gpio_config_t gpioconf = {.pin_bit_mask = 1ull << HAS_ANTENNA_SWITCH,

189
src/blecsan.cpp
View File

@ -8,14 +8,13 @@ https://github.com/nkolban/esp32-snippets/tree/master/BLE/scanner
#include "globals.h"
// Bluetooth specific includes
#include <bt_types.h>
#include <esp_blufi_api.h> // needed for BLE_ADDR types, do not remove
#include <esp_bt.h>
#include <esp_bt_main.h>
#include <esp_gap_ble_api.h>
#include <esp_blufi_api.h> // needed for BLE_ADDR types, do not remove
#include <bt_types.h>
#define BT_BD_ADDR_HEX(addr) \
addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]
#define BT_BD_ADDR_HEX(addr) addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]
// local Tag for logging
static const char TAG[] = "bluetooth";
@ -39,81 +38,45 @@ const char *bt_addr_t_to_string(esp_ble_addr_type_t type) {
} // bt_addr_t_to_string
const char *btsig_gap_type(uint32_t gap_type) {
switch (gap_type) {
case 0x01:
return "Flags";
case 0x02:
return "Incomplete List of 16-bit Service Class UUIDs";
case 0x03:
return "Complete List of 16-bit Service Class UUIDs";
case 0x04:
return "Incomplete List of 32-bit Service Class UUIDs";
case 0x05:
return "Complete List of 32-bit Service Class UUIDs";
case 0x06:
return "Incomplete List of 128-bit Service Class UUIDs";
case 0x07:
return "Complete List of 128-bit Service Class UUIDs";
case 0x08:
return "Shortened Local Name";
case 0x09:
return "Complete Local Name";
case 0x0A:
return "Tx Power Level";
case 0x0D:
return "Class of Device";
case 0x0E:
return "Simple Pairing Hash C/C-192";
case 0x0F:
return "Simple Pairing Randomizer R/R-192";
case 0x10:
return "Device ID/Security Manager TK Value";
case 0x11:
return "Security Manager Out of Band Flags";
case 0x12:
return "Slave Connection Interval Range";
case 0x14:
return "List of 16-bit Service Solicitation UUIDs";
case 0x1F:
return "List of 32-bit Service Solicitation UUIDs";
case 0x15:
return "List of 128-bit Service Solicitation UUIDs";
case 0x16:
return "Service Data - 16-bit UUID";
case 0x20:
return "Service Data - 32-bit UUID";
case 0x21:
return "Service Data - 128-bit UUID";
case 0x22:
return "LE Secure Connections Confirmation Value";
case 0x23:
return "LE Secure Connections Random Value";
case 0x24:
return "URI";
case 0x25:
return "Indoor Positioning";
case 0x26:
return "Transport Discovery Data";
case 0x17:
return "Public Target Address";
case 0x18:
return "Random Target Address";
case 0x19:
return "Appearance";
case 0x1A:
return "Advertising Interval";
case 0x1B:
return "LE Bluetooth Device Address";
case 0x1C:
return "LE Role";
case 0x1D:
return "Simple Pairing Hash C-256";
case 0x1E:
return "Simple Pairing Randomizer R-256";
case 0x3D:
return "3D Information Data";
case 0xFF:
return "Manufacturer Specific Data";
switch (gap_type)
{
case 0x01: return "Flags";
case 0x02: return "Incomplete List of 16-bit Service Class UUIDs";
case 0x03: return "Complete List of 16-bit Service Class UUIDs";
case 0x04: return "Incomplete List of 32-bit Service Class UUIDs";
case 0x05: return "Complete List of 32-bit Service Class UUIDs";
case 0x06: return "Incomplete List of 128-bit Service Class UUIDs";
case 0x07: return "Complete List of 128-bit Service Class UUIDs";
case 0x08: return "Shortened Local Name";
case 0x09: return "Complete Local Name";
case 0x0A: return "Tx Power Level";
case 0x0D: return "Class of Device";
case 0x0E: return "Simple Pairing Hash C/C-192";
case 0x0F: return "Simple Pairing Randomizer R/R-192";
case 0x10: return "Device ID/Security Manager TK Value";
case 0x11: return "Security Manager Out of Band Flags";
case 0x12: return "Slave Connection Interval Range";
case 0x14: return "List of 16-bit Service Solicitation UUIDs";
case 0x1F: return "List of 32-bit Service Solicitation UUIDs";
case 0x15: return "List of 128-bit Service Solicitation UUIDs";
case 0x16: return "Service Data - 16-bit UUID";
case 0x20: return "Service Data - 32-bit UUID";
case 0x21: return "Service Data - 128-bit UUID";
case 0x22: return "LE Secure Connections Confirmation Value";
case 0x23: return "LE Secure Connections Random Value";
case 0x24: return "URI";
case 0x25: return "Indoor Positioning";
case 0x26: return "Transport Discovery Data";
case 0x17: return "Public Target Address";
case 0x18: return "Random Target Address";
case 0x19: return "Appearance";
case 0x1A: return "Advertising Interval";
case 0x1B: return "LE Bluetooth Device Address";
case 0x1C: return "LE Role";
case 0x1D: return "Simple Pairing Hash C-256";
case 0x1E: return "Simple Pairing Randomizer R-256";
case 0x3D: return "3D Information Data";
case 0xFF: return "Manufacturer Specific Data";
default:
return "Unknown type";
@ -121,14 +84,14 @@ const char *btsig_gap_type(uint32_t gap_type) {
} // btsig_gap_type
// using IRAM_:ATTR here to speed up callback function
IRAM_ATTR void gap_callback_handler(esp_gap_ble_cb_event_t event,
esp_ble_gap_cb_param_t *param) {
IRAM_ATTR void gap_callback_handler(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param_t *param)
{
esp_ble_gap_cb_param_t *p = (esp_ble_gap_cb_param_t *)param;
ESP_LOGD(TAG, "BT payload rcvd -> type: 0x%.2x -> %s", *p->scan_rst.ble_adv,
btsig_gap_type(*p->scan_rst.ble_adv));
ESP_LOGD(TAG, "BT payload rcvd -> type: 0x%.2x -> %s", *p->scan_rst.ble_adv, btsig_gap_type(*p->scan_rst.ble_adv));
switch (event) {
switch (event)
{
case ESP_GAP_BLE_SCAN_PARAM_SET_COMPLETE_EVT:
// restart scan
ESP_ERROR_CHECK(esp_ble_gap_start_scanning(BLESCANTIME));
@ -136,33 +99,26 @@ IRAM_ATTR void gap_callback_handler(esp_gap_ble_cb_event_t event,
case ESP_GAP_BLE_SCAN_RESULT_EVT:
// evaluate scan results
if (p->scan_rst.search_evt ==
ESP_GAP_SEARCH_INQ_CMPL_EVT) // Inquiry complete, scan is done
if ( p->scan_rst.search_evt == ESP_GAP_SEARCH_INQ_CMPL_EVT) // Inquiry complete, scan is done
{ // restart scan
ESP_ERROR_CHECK(esp_ble_gap_start_scanning(BLESCANTIME));
return;
}
if (p->scan_rst.search_evt ==
ESP_GAP_SEARCH_INQ_RES_EVT) // Inquiry result for a peer device
if (p->scan_rst.search_evt == ESP_GAP_SEARCH_INQ_RES_EVT) // Inquiry result for a peer device
{ // evaluate sniffed packet
ESP_LOGD(TAG, "Device address (bda): %02x:%02x:%02x:%02x:%02x:%02x",
BT_BD_ADDR_HEX(p->scan_rst.bda));
ESP_LOGD(TAG, "Addr_type : %s",
bt_addr_t_to_string(p->scan_rst.ble_addr_type));
ESP_LOGD(TAG, "Device address (bda): %02x:%02x:%02x:%02x:%02x:%02x", BT_BD_ADDR_HEX(p->scan_rst.bda));
ESP_LOGD(TAG, "Addr_type : %s", bt_addr_t_to_string(p->scan_rst.ble_addr_type));
ESP_LOGD(TAG, "RSSI : %d", p->scan_rst.rssi);
if ((cfg.rssilimit) &&
(p->scan_rst.rssi < cfg.rssilimit)) { // rssi is negative value
ESP_LOGI(TAG, "BLTH RSSI %d -> ignoring (limit: %d)", p->scan_rst.rssi,
cfg.rssilimit);
if ((cfg.rssilimit) && (p->scan_rst.rssi < cfg.rssilimit )) { // rssi is negative value
ESP_LOGI(TAG, "BLTH RSSI %d -> ignoring (limit: %d)", p->scan_rst.rssi, cfg.rssilimit);
break;
}
#ifdef VENDORFILTER
if ((p->scan_rst.ble_addr_type == BLE_ADDR_TYPE_RANDOM) ||
(p->scan_rst.ble_addr_type == BLE_ADDR_TYPE_RPA_RANDOM)) {
if ((p->scan_rst.ble_addr_type == BLE_ADDR_TYPE_RANDOM) || (p->scan_rst.ble_addr_type == BLE_ADDR_TYPE_RPA_RANDOM)) {
ESP_LOGD(TAG, "BT device filtered");
break;
}
@ -177,17 +133,15 @@ IRAM_ATTR void gap_callback_handler(esp_gap_ble_cb_event_t event,
// you can search for elements in the payload using the
// function esp_ble_resolve_adv_data()
//
// Like this, that scans for the "Complete name" (looking inside the
payload buffer)
// Like this, that scans for the "Complete name" (looking inside the payload buffer)
// uint8_t len;
// uint8_t *data = esp_ble_resolve_adv_data(p->scan_rst.ble_adv,
ESP_BLE_AD_TYPE_NAME_CMPL, &len);
// uint8_t *data = esp_ble_resolve_adv_data(p->scan_rst.ble_adv, ESP_BLE_AD_TYPE_NAME_CMPL, &len);
filter BLE devices using their advertisements to get filter alternative to
vendor OUI if vendorfiltering is on, we ...
filter BLE devices using their advertisements to get filter alternative to vendor OUI
if vendorfiltering is on, we ...
- want to count: mobile phones and tablets
- don't want to count: beacons, peripherals (earphones, headsets,
printers), cars and machines see
- don't want to count: beacons, peripherals (earphones, headsets, printers), cars and machines
see
https://github.com/nkolban/ESP32_BLE_Arduino/blob/master/src/BLEAdvertisedDevice.cpp
http://www.libelium.com/products/meshlium/smartphone-detection/
@ -196,10 +150,9 @@ IRAM_ATTR void gap_callback_handler(esp_gap_ble_cb_event_t event,
https://www.bluetooth.com/specifications/assigned-numbers/baseband
"The Class of Device (CoD) in case of Bluetooth which allows us to
differentiate the type of device (smartphone, handsfree, computer,
LAN/network AP). With this parameter we can differentiate among
pedestrians and vehicles."
"The Class of Device (CoD) in case of Bluetooth which allows us to differentiate the type of
device (smartphone, handsfree, computer, LAN/network AP). With this parameter we can
differentiate among pedestrians and vehicles."
*/
@ -211,6 +164,7 @@ IRAM_ATTR void gap_callback_handler(esp_gap_ble_cb_event_t event,
}
} // gap_callback_handler
esp_err_t register_ble_callback(void) {
ESP_LOGI(TAG, "Register GAP callback");
@ -218,21 +172,20 @@ esp_err_t register_ble_callback(void) {
//register the scan callback function to the gap module
ESP_ERROR_CHECK(esp_ble_gap_register_callback(&gap_callback_handler));
static esp_ble_scan_params_t ble_scan_params = {
static esp_ble_scan_params_t ble_scan_params =
{
.scan_type = BLE_SCAN_TYPE_PASSIVE,
.own_addr_type = BLE_ADDR_TYPE_RANDOM,
#ifdef VENDORFILTER
.scan_filter_policy = BLE_SCAN_FILTER_ALLOW_WLIST_PRA_DIR,
// ADV_IND, ADV_NONCONN_IND, ADV_SCAN_IND packets are used for broadcasting
// data in broadcast applications (e.g., Beacons), so we don't want them in
// vendorfilter mode
// data in broadcast applications (e.g., Beacons), so we don't want them in vendorfilter mode
#else
.scan_filter_policy = BLE_SCAN_FILTER_ALLOW_ALL,
#endif
.scan_interval =
(uint16_t)(cfg.blescantime * 10 / 0.625), // Time = N * 0.625 msec
.scan_interval = (uint16_t) (cfg.blescantime * 10 / 0.625), // Time = N * 0.625 msec
.scan_window = (uint16_t) (BLESCANWINDOW / 0.625) // Time = N * 0.625 msec
};
@ -250,13 +203,11 @@ void start_BLEscan(void) {
// Initialize BT controller to allocate task and other resource.
esp_bt_controller_config_t bt_cfg = BT_CONTROLLER_INIT_CONFIG_DEFAULT();
bt_cfg.controller_task_stack_size =
BLESTACKSIZE; // set BT stack size to value configured in paxcounter.conf
bt_cfg.controller_task_stack_size = BLESTACKSIZE; // set BT stack size to value configured in paxcounter.conf
ESP_ERROR_CHECK(esp_bt_controller_init(&bt_cfg));
ESP_ERROR_CHECK(esp_bt_controller_enable(ESP_BT_MODE_BTDM));
// Init and alloc the resource for bluetooth stack, must be done prior to
// every bluetooth stuff
// Init and alloc the resource for bluetooth stack, must be done prior to every bluetooth stuff
ESP_ERROR_CHECK(esp_bluedroid_init());
ESP_ERROR_CHECK(esp_bluedroid_enable());

72
src/configmanager.cpp
View File

@ -18,8 +18,7 @@ void antenna_select(const uint8_t _ant);
// populate cfg vars with factory settings
void defaultConfig() {
cfg.lorasf = LORASFDEFAULT; // 7-12, initial lora spreadfactor defined in
// paxcounter.conf
cfg.lorasf = LORASFDEFAULT; // 7-12, initial lora spreadfactor defined in paxcounter.conf
cfg.txpower = 15; // 2-15, lora tx power
cfg.adrmode = 1; // 0=disabled, 1=enabled
cfg.screensaver = 0; // 0=disabled, 1=enabled
@ -27,11 +26,8 @@ void defaultConfig() {
cfg.countermode = 0; // 0=cyclic, 1=cumulative, 2=cyclic confirmed
cfg.rssilimit = 0; // threshold for rssilimiter, negative value!
cfg.sendcycle = SEND_SECS; // payload send cycle [seconds/2]
cfg.wifichancycle =
WIFI_CHANNEL_SWITCH_INTERVAL; // wifi channel switch cycle [seconds/100]
cfg.blescantime =
BLESCANINTERVAL /
10; // BT channel scan cycle duration [seconds/100], default 1 (= 10ms)
cfg.wifichancycle = WIFI_CHANNEL_SWITCH_INTERVAL; // wifi channel switch cycle [seconds/100]
cfg.blescantime = BLESCANINTERVAL / 10; // BT channel scan cycle duration [seconds/100], default 1 (= 10ms)
cfg.blescan = 1; // 0=disabled, 1=enabled
cfg.wifiant = 0; // 0=internal, 1=external (for LoPy/LoPy4)
cfg.vendorfilter = 1; // 0=disabled, 1=enabled
@ -68,10 +64,9 @@ void eraseConfig() {
nvs_erase_all(my_handle);
nvs_commit(my_handle);
nvs_close(my_handle);
ESP_LOGI(TAG, "Done");
} else {
ESP_LOGW(TAG, "NVS erase failed");
}
ESP_LOGI(TAG, "Done");}
else {
ESP_LOGW(TAG, "NVS erase failed"); }
}
// save current configuration from RAM to NVRAM
@ -84,69 +79,52 @@ void saveConfig() {
size_t required_size;
char storedversion[10];
if (nvs_get_str(my_handle, "version", storedversion, &required_size) !=
ESP_OK ||
strcmp(storedversion, cfg.version) != 0)
if( nvs_get_str(my_handle, "version", storedversion, &required_size) != ESP_OK || strcmp(storedversion, cfg.version) != 0 )
nvs_set_str(my_handle, "version", cfg.version);
if (nvs_get_i8(my_handle, "lorasf", &flash8) != ESP_OK ||
flash8 != cfg.lorasf)
if( nvs_get_i8(my_handle, "lorasf", &flash8) != ESP_OK || flash8 != cfg.lorasf )
nvs_set_i8(my_handle, "lorasf", cfg.lorasf);
if (nvs_get_i8(my_handle, "txpower", &flash8) != ESP_OK ||
flash8 != cfg.txpower)
if( nvs_get_i8(my_handle, "txpower", &flash8) != ESP_OK || flash8 != cfg.txpower )
nvs_set_i8(my_handle, "txpower", cfg.txpower);
if (nvs_get_i8(my_handle, "adrmode", &flash8) != ESP_OK ||
flash8 != cfg.adrmode)
if( nvs_get_i8(my_handle, "adrmode", &flash8) != ESP_OK || flash8 != cfg.adrmode )
nvs_set_i8(my_handle, "adrmode", cfg.adrmode);
if (nvs_get_i8(my_handle, "screensaver", &flash8) != ESP_OK ||
flash8 != cfg.screensaver)
if( nvs_get_i8(my_handle, "screensaver", &flash8) != ESP_OK || flash8 != cfg.screensaver )
nvs_set_i8(my_handle, "screensaver", cfg.screensaver);
if (nvs_get_i8(my_handle, "screenon", &flash8) != ESP_OK ||
flash8 != cfg.screenon)
if( nvs_get_i8(my_handle, "screenon", &flash8) != ESP_OK || flash8 != cfg.screenon )
nvs_set_i8(my_handle, "screenon", cfg.screenon);
if (nvs_get_i8(my_handle, "countermode", &flash8) != ESP_OK ||
flash8 != cfg.countermode)
if( nvs_get_i8(my_handle, "countermode", &flash8) != ESP_OK || flash8 != cfg.countermode )
nvs_set_i8(my_handle, "countermode", cfg.countermode);
if (nvs_get_i8(my_handle, "sendcycle", &flash8) != ESP_OK ||
flash8 != cfg.sendcycle)
if( nvs_get_i8(my_handle, "sendcycle", &flash8) != ESP_OK || flash8 != cfg.sendcycle )
nvs_set_i8(my_handle, "sendcycle", cfg.sendcycle);
if (nvs_get_i8(my_handle, "wifichancycle", &flash8) != ESP_OK ||
flash8 != cfg.wifichancycle)
if( nvs_get_i8(my_handle, "wifichancycle", &flash8) != ESP_OK || flash8 != cfg.wifichancycle )
nvs_set_i8(my_handle, "wifichancycle", cfg.wifichancycle);
if (nvs_get_i8(my_handle, "blescantime", &flash8) != ESP_OK ||
flash8 != cfg.blescantime)
if( nvs_get_i8(my_handle, "blescantime", &flash8) != ESP_OK || flash8 != cfg.blescantime )
nvs_set_i8(my_handle, "blescantime", cfg.blescantime);
if (nvs_get_i8(my_handle, "blescanmode", &flash8) != ESP_OK ||
flash8 != cfg.blescan)
if( nvs_get_i8(my_handle, "blescanmode", &flash8) != ESP_OK || flash8 != cfg.blescan )
nvs_set_i8(my_handle, "blescanmode", cfg.blescan);
if (nvs_get_i8(my_handle, "wifiant", &flash8) != ESP_OK ||
flash8 != cfg.wifiant)
if( nvs_get_i8(my_handle, "wifiant", &flash8) != ESP_OK || flash8 != cfg.wifiant )
nvs_set_i8(my_handle, "wifiant", cfg.wifiant);
if (nvs_get_i8(my_handle, "vendorfilter", &flash8) != ESP_OK ||
flash8 != cfg.vendorfilter)
if( nvs_get_i8(my_handle, "vendorfilter", &flash8) != ESP_OK || flash8 != cfg.vendorfilter )
nvs_set_i8(my_handle, "vendorfilter", cfg.vendorfilter);
if (nvs_get_i8(my_handle, "rgblum", &flash8) != ESP_OK ||
flash8 != cfg.rgblum)
if( nvs_get_i8(my_handle, "rgblum", &flash8) != ESP_OK || flash8 != cfg.rgblum )
nvs_set_i8(my_handle, "rgblum", cfg.rgblum);
if (nvs_get_i8(my_handle, "gpsmode", &flash8) != ESP_OK ||
flash8 != cfg.gpsmode)
if( nvs_get_i8(my_handle, "gpsmode", &flash8) != ESP_OK || flash8 != cfg.gpsmode )
nvs_set_i8(my_handle, "gpsmode", cfg.gpsmode);
if (nvs_get_i16(my_handle, "rssilimit", &flash16) != ESP_OK ||
flash16 != cfg.rssilimit)
if( nvs_get_i16(my_handle, "rssilimit", &flash16) != ESP_OK || flash16 != cfg.rssilimit )
nvs_set_i16(my_handle, "rssilimit", cfg.rssilimit);
err = nvs_commit(my_handle);
@ -175,8 +153,7 @@ void loadConfig() {
open_storage();
if (err != ESP_OK) {
ESP_LOGW(TAG,"Error (%d) opening NVS handle, storing defaults", err);
saveConfig();
} // saves factory settings to NVRAM
saveConfig(); } // saves factory settings to NVRAM
else {
int8_t flash8 = 0;
int16_t flash16 = 0;
@ -187,8 +164,7 @@ void loadConfig() {
nvs_get_str(my_handle, "version", cfg.version, &required_size);
ESP_LOGI(TAG, "NVRAM settings version = %s", cfg.version);
if (strcmp(cfg.version, PROGVERSION)) {
ESP_LOGI(TAG, "migrating NVRAM settings to new version %s",
PROGVERSION);
ESP_LOGI(TAG, "migrating NVRAM settings to new version %s", PROGVERSION);
nvs_close(my_handle);
migrateVersion();
}

9
src/globals.h
View File

@ -2,9 +2,9 @@
#include <Arduino.h>
// std::set for unified array functions
#include <algorithm>
#include <array>
#include <set>
#include <array>
#include <algorithm>
// OLED Display
#ifdef HAS_DISPLAY
@ -25,9 +25,9 @@
#include <SmartLeds.h>
#endif
#include "rgb_led.h"
#include "macsniff.h"
#include "main.h"
#include "rgb_led.h"
// Struct holding devices's runtime configuration
typedef struct {
@ -68,7 +68,6 @@ extern char display_lora[], display_lmic[];
extern int countermode, screensaver, adrmode, lorasf, txpower, rlim;
extern uint16_t macs_total, macs_wifi, macs_ble; // MAC counters
extern std::set<uint16_t> macs;
extern hw_timer_t
*channelSwitch; // hardware timer used for wifi channel switching
extern hw_timer_t * channelSwitch; // hardware timer used for wifi channel switching
extern xref2u1_t rcmd_data; // buffer for rcommand results size
extern u1_t rcmd_data_size; // buffer for rcommand results size

3
src/gpsread.cpp
View File

@ -28,7 +28,8 @@ void gps_loop(void *pvParameters) {
while(1) {
if (cfg.gpsmode) {
if (cfg.gpsmode)
{
#if defined GPS_SERIAL
// serial connect to GPS device

32
src/hal/heltec.h
View File

@ -8,32 +8,18 @@
#define HAS_BUTTON GPIO_NUM_0 // button "PROG" on board
// re-define pin definitions of pins_arduino.h
#define PIN_SPI_SS \
GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- SX1276 NSS (Pin19) SPI Chip Select
// Input
#define PIN_SPI_MOSI \
GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- SX1276 MOSI (Pin18) SPI Data Input
#define PIN_SPI_MISO \
GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- SX1276 MISO (Pin17) SPI Data Output
#define PIN_SPI_SCK \
GPIO_NUM_5 // ESP32 GPIO5 (Pin5) -- SX1276 SCK (Pin16) SPI Clock Input
#define PIN_SPI_SS GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- SX1276 NSS (Pin19) SPI Chip Select Input
#define PIN_SPI_MOSI GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- SX1276 MOSI (Pin18) SPI Data Input
#define PIN_SPI_MISO GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- SX1276 MISO (Pin17) SPI Data Output
#define PIN_SPI_SCK GPIO_NUM_5 // ESP32 GPIO5 (Pin5) -- SX1276 SCK (Pin16) SPI Clock Input
// non arduino pin definitions
#define RST \
GPIO_NUM_14 // ESP32 GPIO14 (Pin14) -- SX1276 NRESET (Pin7) Reset Trigger
// Input
#define DIO0 \
GPIO_NUM_26 // ESP32 GPIO26 (Pin15) -- SX1276 DIO0 (Pin8) used by LMIC for
// detecting LoRa RX_Done & TX_Done
#define DIO1 \
GPIO_NUM_33 // ESP32 GPIO33 (Pin13) -- SX1276 DIO1 (Pin9) used by LMIC for
// detecting LoRa RX_Timeout
#define DIO2 \
LMIC_UNUSED_PIN // 32 ESP32 GPIO32 (Pin12) -- SX1276 DIO2 (Pin10) not used by
// LMIC for LoRa (Timeout for FSK only)
#define RST GPIO_NUM_14 // ESP32 GPIO14 (Pin14) -- SX1276 NRESET (Pin7) Reset Trigger Input
#define DIO0 GPIO_NUM_26 // ESP32 GPIO26 (Pin15) -- SX1276 DIO0 (Pin8) used by LMIC for detecting LoRa RX_Done & TX_Done
#define DIO1 GPIO_NUM_33 // ESP32 GPIO33 (Pin13) -- SX1276 DIO1 (Pin9) used by LMIC for detecting LoRa RX_Timeout
#define DIO2 LMIC_UNUSED_PIN // 32 ESP32 GPIO32 (Pin12) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)
// Hardware pin definitions for Heltec LoRa-32 Board with OLED SSD1306 I2C
// Display
// Hardware pin definitions for Heltec LoRa-32 Board with OLED SSD1306 I2C Display
#define OLED_RST GPIO_NUM_16 // ESP32 GPIO16 (Pin16) -- SD1306 RST
#define OLED_SDA GPIO_NUM_4 // ESP32 GPIO4 (Pin4) -- SD1306 D1+D2
#define OLED_SCL GPIO_NUM_15 // ESP32 GPIO15 (Pin15) -- SD1306 D0

41
src/hal/lolin32_lora.h
View File

@ -6,13 +6,9 @@
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board
//#define DISPLAY_FLIP 1 // uncomment this for rotated display
#define HAS_LED \
NOT_A_PIN // Led os on same pin as Lora SS pin, to avoid problems, we don't
// use it
#define LED_ACTIVE_LOW \
1 // Onboard LED is active when pin is LOW
// Anyway shield is on over the LoLin32 board, so we won't be able to see
// this LED
#define HAS_LED NOT_A_PIN // Led os on same pin as Lora SS pin, to avoid problems, we don't use it
#define LED_ACTIVE_LOW 1 // Onboard LED is active when pin is LOW
// Anyway shield is on over the LoLin32 board, so we won't be able to see this LED
#define HAS_RGB_LED 13 // ESP32 GPIO13 (pin13) On Board Shield WS2812B RGB LED
#define HAS_BUTTON 15 // ESP32 GPIO15 (pin15) Button is on the LoraNode32 shield
#define BUTTON_PULLUP 1 // Button need pullup instead of default pulldown
@ -20,30 +16,17 @@
#define CFG_sx1276_radio 1 // RFM95 module
// re-define pin definitions of pins_arduino.h
#define PIN_SPI_SS \
5 // ESP32 GPIO5 (Pin5) -- SX1276 NSS (Pin19) SPI Chip Select Input
#define PIN_SPI_MOSI \
23 // ESP32 GPIO23 (Pin23) -- SX1276 MOSI (Pin18) SPI Data Input
#define PIN_SPI_MISO \
19 // ESP32 GPIO19 (Pin19) -- SX1276 MISO (Pin17) SPI Data Output
#define PIN_SPI_SCK \
18 // ESP32 GPIO18 (Pin18 -- SX1276 SCK (Pin16) SPI Clock Input
#define PIN_SPI_SS 5 // ESP32 GPIO5 (Pin5) -- SX1276 NSS (Pin19) SPI Chip Select Input
#define PIN_SPI_MOSI 23 // ESP32 GPIO23 (Pin23) -- SX1276 MOSI (Pin18) SPI Data Input
#define PIN_SPI_MISO 19 // ESP32 GPIO19 (Pin19) -- SX1276 MISO (Pin17) SPI Data Output
#define PIN_SPI_SCK 18 // ESP32 GPIO18 (Pin18 -- SX1276 SCK (Pin16) SPI Clock Input
// non arduino pin definitions
#define RST \
25 // ESP32 GPIO25 (Pin25) -- SX1276 NRESET (Pin7) Reset Trigger Input
#define DIO0 \
27 // ESP32 GPIO27 (Pin27) -- SX1276 DIO0 (Pin8) used by LMIC for detecting
// LoRa RX_Done & TX_Done
#define DIO1 \
26 // ESP32 GPIO26 (Pin26) -- SX1276 DIO1 (Pin9) used by LMIC for detecting
// LoRa RX_Timeout
#define DIO2 \
LMIC_UNUSED_PIN // 4 ESP32 GPIO4 (Pin4) -- SX1276 DIO2 (Pin10) not used by
// LMIC for LoRa (Timeout for FSK only)
#define DIO5 \
LMIC_UNUSED_PIN // 35 ESP32 GPIO35 (Pin35) -- SX1276 DIO5 not used by LMIC
// for LoRa (Timeout for FSK only)
#define RST 25 // ESP32 GPIO25 (Pin25) -- SX1276 NRESET (Pin7) Reset Trigger Input
#define DIO0 27 // ESP32 GPIO27 (Pin27) -- SX1276 DIO0 (Pin8) used by LMIC for detecting LoRa RX_Done & TX_Done
#define DIO1 26 // ESP32 GPIO26 (Pin26) -- SX1276 DIO1 (Pin9) used by LMIC for detecting LoRa RX_Timeout
#define DIO2 LMIC_UNUSED_PIN // 4 ESP32 GPIO4 (Pin4) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)
#define DIO5 LMIC_UNUSED_PIN // 35 ESP32 GPIO35 (Pin35) -- SX1276 DIO5 not used by LMIC for LoRa (Timeout for FSK only)
// Hardware pin definitions for LoRaNode32 Board with OLED I2C Display
#define OLED_RST U8X8_PIN_NONE // Not reset pin

31
src/hal/lolin32lite_lora.h
View File

@ -15,30 +15,17 @@
#define CFG_sx1276_radio 1 // RFM95 module
// re-define pin definitions of pins_arduino.h
#define PIN_SPI_SS \
5 // ESP32 GPIO5 (Pin5) -- SX1276 NSS (Pin19) SPI Chip Select Input
#define PIN_SPI_MOSI \
23 // ESP32 GPIO23 (Pin23) -- SX1276 MOSI (Pin18) SPI Data Input
#define PIN_SPI_MISO \
19 // ESP32 GPIO19 (Pin19) -- SX1276 MISO (Pin17) SPI Data Output
#define PIN_SPI_SCK \
18 // ESP32 GPIO18 (Pin18 -- SX1276 SCK (Pin16) SPI Clock Input
#define PIN_SPI_SS 5 // ESP32 GPIO5 (Pin5) -- SX1276 NSS (Pin19) SPI Chip Select Input
#define PIN_SPI_MOSI 23 // ESP32 GPIO23 (Pin23) -- SX1276 MOSI (Pin18) SPI Data Input
#define PIN_SPI_MISO 19 // ESP32 GPIO19 (Pin19) -- SX1276 MISO (Pin17) SPI Data Output
#define PIN_SPI_SCK 18 // ESP32 GPIO18 (Pin18 -- SX1276 SCK (Pin16) SPI Clock Input
// non arduino pin definitions
#define RST \
25 // ESP32 GPIO25 (Pin25) -- SX1276 NRESET (Pin7) Reset Trigger Input
#define DIO0 \
27 // ESP32 GPIO27 (Pin27) -- SX1276 DIO0 (Pin8) used by LMIC for detecting
// LoRa RX_Done & TX_Done
#define DIO1 \
26 // ESP32 GPIO26 (Pin26) -- SX1276 DIO1 (Pin9) used by LMIC for detecting
// LoRa RX_Timeout
#define DIO2 \
LMIC_UNUSED_PIN // 4 ESP32 GPIO4 (Pin4) -- SX1276 DIO2 (Pin10) not used by
// LMIC for LoRa (Timeout for FSK only)
#define DIO5 \
LMIC_UNUSED_PIN // 35 ESP32 GPIO35 (Pin35) -- SX1276 DIO5 not used by LMIC
// for LoRa (Timeout for FSK only)
#define RST 25 // ESP32 GPIO25 (Pin25) -- SX1276 NRESET (Pin7) Reset Trigger Input
#define DIO0 27 // ESP32 GPIO27 (Pin27) -- SX1276 DIO0 (Pin8) used by LMIC for detecting LoRa RX_Done & TX_Done
#define DIO1 26 // ESP32 GPIO26 (Pin26) -- SX1276 DIO1 (Pin9) used by LMIC for detecting LoRa RX_Timeout
#define DIO2 LMIC_UNUSED_PIN // 4 ESP32 GPIO4 (Pin4) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)
#define DIO5 LMIC_UNUSED_PIN // 35 ESP32 GPIO35 (Pin35) -- SX1276 DIO5 not used by LMIC for LoRa (Timeout for FSK only)
// Hardware pin definitions for LoRaNode32 Board with OLED I2C Display
#define OLED_RST U8X8_PIN_NONE // Not reset pin

6
src/hal/lopy.h
View File

@ -1,14 +1,12 @@
// Hardware related definitions for Pycom LoPy Board (not: LoPy4)
#define CFG_sx1272_radio 1
#define HAS_LED \
NOT_A_PIN // LoPy4 has no on board LED, so we use RGB LED on LoPy4
#define HAS_LED NOT_A_PIN // LoPy4 has no on board LED, so we use RGB LED on LoPy4
#define HAS_RGB_LED GPIO_NUM_0 // WS2812B RGB LED on GPIO0
// !!EXPERIMENTAL - not tested yet!!
// uncomment this only if your LoPy lives on a Pytrack expansion board with GPS
// see
// http://www.quectel.com/UploadImage/Downlad/Quectel_L76-L_I2C_Application_Note_V1.0.pdf
// see http://www.quectel.com/UploadImage/Downlad/Quectel_L76-L_I2C_Application_Note_V1.0.pdf
//#define HAS_GPS 1
//#define GPS_I2C_PINS GPIO_NUM_9, GPIO_NUM_8 // SDA, SCL
//#define GPS_I2C_ADDRESS_READ 0x21

6
src/hal/lopy4.h
View File

@ -1,14 +1,12 @@
// Hardware related definitions for Pycom LoPy Board (not: LoPy4)
#define CFG_sx1276_radio 1
#define HAS_LED \
NOT_A_PIN // LoPy4 has no on board LED, so we use RGB LED on LoPy4
#define HAS_LED NOT_A_PIN // LoPy4 has no on board LED, so we use RGB LED on LoPy4
#define HAS_RGB_LED GPIO_NUM_0 // WS2812B RGB LED on GPIO0
// !!EXPERIMENTAL - not tested yet!!f
// uncomment this only if your LoPy lives on a Pytrack expansion board with GPS
// see
// http://www.quectel.com/UploadImage/Downlad/Quectel_L76-L_I2C_Application_Note_V1.0.pdf
// see http://www.quectel.com/UploadImage/Downlad/Quectel_L76-L_I2C_Application_Note_V1.0.pdf
//#define HAS_GPS 1
//#define GPS_I2C_PINS GPIO_NUM_9, GPIO_NUM_8 // SDA, SCL
//#define GPS_I2C_ADDRESS_READ 0x21

23
src/hal/ttgobeam.h
View File

@ -3,26 +3,17 @@
#define CFG_sx1276_radio 1 // HPD13A LoRa SoC
#define HAS_LED GPIO_NUM_21 // on board green LED_G1
//#define HAS_BUTTON GPIO_NUM_39 // on board button "BOOT" (next to reset
// button) !! seems not to work!!
#define HAS_BATTERY_PROBE \
ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
//#define HAS_BUTTON GPIO_NUM_39 // on board button "BOOT" (next to reset button) !! seems not to work!!
#define HAS_BATTERY_PROBE ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
#define BATT_FACTOR 2 // voltage divider 100k/100k on board
#define HAS_GPS 1 // use on board GPS
#define GPS_SERIAL \
9600, SERIAL_8N1, GPIO_NUM_12, \
GPIO_NUM_15 // UBlox NEO 6M or 7M with default configuration
#define GPS_SERIAL 9600, SERIAL_8N1, GPIO_NUM_12, GPIO_NUM_15 // UBlox NEO 6M or 7M with default configuration
// re-define pin definitions of pins_arduino.h
#define PIN_SPI_SS \
GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- HPD13A NSS/SEL (Pin4) SPI Chip Select
// Input
#define PIN_SPI_MOSI \
GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- HPD13A MOSI/DSI (Pin6) SPI Data Input
#define PIN_SPI_MISO \
GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- HPD13A MISO/DSO (Pin7) SPI Data Output
#define PIN_SPI_SCK \
GPIO_NUM_5 // ESP32 GPIO5 (Pin5) -- HPD13A SCK (Pin5) SPI Clock Input
#define PIN_SPI_SS GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- HPD13A NSS/SEL (Pin4) SPI Chip Select Input
#define PIN_SPI_MOSI GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- HPD13A MOSI/DSI (Pin6) SPI Data Input
#define PIN_SPI_MISO GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- HPD13A MISO/DSO (Pin7) SPI Data Output
#define PIN_SPI_SCK GPIO_NUM_5 // ESP32 GPIO5 (Pin5) -- HPD13A SCK (Pin5) SPI Clock Input
// non arduino pin definitions
#define RST LMIC_UNUSED_PIN // connected to ESP32 RST/EN

29
src/hal/ttgov1.h
View File

@ -9,29 +9,16 @@
#define HAS_BUTTON GPIO_NUM_0 // button "PRG" on board
// re-define pin definitions of pins_arduino.h
#define PIN_SPI_SS \
GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- SX1276 NSS (Pin19) SPI Chip Select
// Input
#define PIN_SPI_MOSI \
GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- SX1276 MOSI (Pin18) SPI Data Input
#define PIN_SPI_MISO \
GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- SX1276 MISO (Pin17) SPI Data Output
#define PIN_SPI_SCK \
GPIO_NUM_5 // ESP32 GPIO5 (Pin5) -- SX1276 SCK (Pin16) SPI Clock Input
#define PIN_SPI_SS GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- SX1276 NSS (Pin19) SPI Chip Select Input
#define PIN_SPI_MOSI GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- SX1276 MOSI (Pin18) SPI Data Input
#define PIN_SPI_MISO GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- SX1276 MISO (Pin17) SPI Data Output
#define PIN_SPI_SCK GPIO_NUM_5 // ESP32 GPIO5 (Pin5) -- SX1276 SCK (Pin16) SPI Clock Input
// non arduino pin definitions
#define RST \
GPIO_NUM_14 // ESP32 GPIO14 (Pin14) -- SX1276 NRESET (Pin7) Reset Trigger
// Input
#define DIO0 \
GPIO_NUM_26 // ESP32 GPIO26 (Pin15) -- SX1276 DIO0 (Pin8) used by LMIC for
// detecting LoRa RX_Done & TX_Done
#define DIO1 \
GPIO_NUM_33 // ESP32 GPIO33 (Pin13) -- SX1276 DIO1 (Pin9) used by LMIC for
// detecting LoRa RX_Timeout
#define DIO2 \
LMIC_UNUSED_PIN // 32 ESP32 GPIO32 (Pin12) -- SX1276 DIO2 (Pin10) not used by
// LMIC for LoRa (Timeout for FSK only)
#define RST GPIO_NUM_14 // ESP32 GPIO14 (Pin14) -- SX1276 NRESET (Pin7) Reset Trigger Input
#define DIO0 GPIO_NUM_26 // ESP32 GPIO26 (Pin15) -- SX1276 DIO0 (Pin8) used by LMIC for detecting LoRa RX_Done & TX_Done
#define DIO1 GPIO_NUM_33 // ESP32 GPIO33 (Pin13) -- SX1276 DIO1 (Pin9) used by LMIC for detecting LoRa RX_Timeout
#define DIO2 LMIC_UNUSED_PIN // 32 ESP32 GPIO32 (Pin12) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)
// Hardware pin definitions for TTGOv1 Board with OLED SSD1306 I2C Display
#define OLED_RST GPIO_NUM_16 // ESP32 GPIO16 (Pin16) -- SD1306 Reset

29
src/hal/ttgov2.h
View File

@ -4,38 +4,29 @@
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
//#define DISPLAY_FLIP 1 // uncomment this for rotated display
#define HAS_LED \
NOT_A_PIN // on-board LED is wired to SCL (used by display) therefore totally
// useless
#define HAS_LED NOT_A_PIN // on-board LED is wired to SCL (used by display) therefore totally useless
// disable brownout detection (needed on TTGOv2 for battery powered operation)
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
// re-define pin definitions of pins_arduino.h
#define PIN_SPI_SS \
GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- HPD13A NSS/SEL (Pin4) SPI Chip Select
// Input
#define PIN_SPI_MOSI \
GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- HPD13A MOSI/DSI (Pin6) SPI Data Input
#define PIN_SPI_MISO \
GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- HPD13A MISO/DSO (Pin7) SPI Data Output
#define PIN_SPI_SCK \
GPIO_NUM_5 // ESP32 GPIO5 (Pin5) -- HPD13A SCK (Pin5) SPI Clock Input
#define PIN_SPI_SS GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- HPD13A NSS/SEL (Pin4) SPI Chip Select Input
#define PIN_SPI_MOSI GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- HPD13A MOSI/DSI (Pin6) SPI Data Input
#define PIN_SPI_MISO GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- HPD13A MISO/DSO (Pin7) SPI Data Output
#define PIN_SPI_SCK GPIO_NUM_5 // ESP32 GPIO5 (Pin5) -- HPD13A SCK (Pin5) SPI Clock Input
// non arduino pin definitions
#define RST LMIC_UNUSED_PIN // connected to ESP32 RST/EN
#define DIO0 GPIO_NUM_26 // ESP32 GPIO26 wired on PCB to HPD13A
#define DIO1 GPIO_NUM_33 // HPDIO1 on pcb, needs to be wired external to GPIO33
#define DIO2 \
LMIC_UNUSED_PIN // 32 HPDIO2 on pcb, needs to be wired external to GPIO32 (not
// necessary for LoRa, only FSK)
#define DIO2 LMIC_UNUSED_PIN // 32 HPDIO2 on pcb, needs to be wired external to GPIO32 (not necessary for LoRa, only FSK)
// Hardware pin definitions for TTGO V2 Board with OLED SSD1306 0,96" I2C
// Display
// Hardware pin definitions for TTGO V2 Board with OLED SSD1306 0,96" I2C Display
#define OLED_RST U8X8_PIN_NONE // connected to CPU RST/EN
#define OLED_SDA GPIO_NUM_21 // ESP32 GPIO4 (Pin4) -- SD1306 D1+D2
#define OLED_SCL GPIO_NUM_22 // ESP32 GPIO15 (Pin15) -- SD1306 D0
/*
ESP32 LoRa module (SPI) OLED display (I2C)
--------- ----------------- ------------------
@ -57,6 +48,6 @@
{2} Must be manually wired!
DIO2 is wired to a separate pin but is not wired on-board to pin/GPIO32.
Explicitly wire board pin labeled DIO2 to pin 32 (see TTGO V2.0 pinout).
{3} The on-board LED is wired to SCL (used by display) therefore totally
useless!
{3} The on-board LED is wired to SCL (used by display) therefore totally useless!
*/

22
src/hal/ttgov21.h
View File

@ -4,22 +4,15 @@
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
#define DISPLAY_FLIP 1 // rotated display
#define HAS_LED \
GPIO_NUM_23 // green on board LED_G3 (not in initial board version)
#define HAS_BATTERY_PROBE \
ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
#define HAS_LED GPIO_NUM_23 // green on board LED_G3 (not in initial board version)
#define HAS_BATTERY_PROBE ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
#define BATT_FACTOR 2 // voltage divider 100k/100k on board
// re-define pin definitions of pins_arduino.h
#define PIN_SPI_SS \
GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- HPD13A NSS/SEL (Pin4) SPI Chip Select
// Input
#define PIN_SPI_MOSI \
GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- HPD13A MOSI/DSI (Pin6) SPI Data Input
#define PIN_SPI_MISO \
GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- HPD13A MISO/DSO (Pin7) SPI Data Output
#define PIN_SPI_SCK \
GPIO_NUM_5 // ESP32 GPIO5 (Pin5) -- HPD13A SCK (Pin5) SPI Clock Input
#define PIN_SPI_SS GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- HPD13A NSS/SEL (Pin4) SPI Chip Select Input
#define PIN_SPI_MOSI GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- HPD13A MOSI/DSI (Pin6) SPI Data Input
#define PIN_SPI_MISO GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- HPD13A MISO/DSO (Pin7) SPI Data Output
#define PIN_SPI_SCK GPIO_NUM_5 // ESP32 GPIO5 (Pin5) -- HPD13A SCK (Pin5) SPI Clock Input
// non arduino pin definitions
#define RST LMIC_UNUSED_PIN // connected to ESP32 RST/EN
@ -27,8 +20,7 @@
#define DIO1 GPIO_NUM_33 // ESP32 GPIO33 <-> HPDIO1 <-> HPD13A IO1
#define DIO2 GPIO_NUM_32 // ESP32 GPIO32 <-> HPDIO2 <-> HPD13A IO2
// Hardware pin definitions for TTGO V2 Board with OLED SSD1306 0,96" I2C
// Display
// Hardware pin definitions for TTGO V2 Board with OLED SSD1306 0,96" I2C Display
#define OLED_RST U8X8_PIN_NONE // connected to CPU RST/EN
#define OLED_SDA GPIO_NUM_21 // ESP32 GPIO4 (Pin4) -- SD1306 D1+D2
#define OLED_SCL GPIO_NUM_22 // ESP32 GPIO15 (Pin15) -- SD1306 D0

9
src/loraconf.sample.h
View File

@ -5,15 +5,13 @@
* and rename this file to src/loraconf.h
*
* Note that DEVEUI, APPEUI and APPKEY should all be specified in MSB format.
* (This is different from standard LMIC-Arduino which expects DEVEUI and APPEUI
in LSB format.)
* (This is different from standard LMIC-Arduino which expects DEVEUI and APPEUI in LSB format.)
* Set your DEVEUI here, if you have one. You can leave this untouched,
* then the DEVEUI will be generated during runtime from device's MAC adress
* and will be displayed on device's screen as well as on serial console.
*
* NOTE: Use MSB format (as displayed in TTN console, so you can cut & paste
from there)
* NOTE: Use MSB format (as displayed in TTN console, so you can cut & paste from there)
* For TTN, APPEUI in MSB format always starts with 0x70, 0xB3, 0xD5
*
* Note: If using a board with Microchip 24AA02E64 Uinique ID for deveui,
@ -27,5 +25,4 @@ static const u1_t DEVEUI[8] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
static const u1_t APPEUI[8]={ 0x70, 0xB3, 0xD5, 0x00, 0x00, 0x00, 0x00, 0x00 };
static const u1_t APPKEY[16] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
static const u1_t APPKEY[16] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };

127
src/lorawan.cpp
View File

@ -3,8 +3,8 @@
// LMIC-Arduino LoRaWAN Stack
#include "loraconf.h"
#include <hal/hal.h>
#include <lmic.h>
#include <hal/hal.h>
#ifdef MCP_24AA02E64_I2C_ADDRESS
#include <Wire.h> // Needed for 24AA02E64, does not hurt anything if included and not used
@ -35,13 +35,13 @@ void gen_lora_deveui(uint8_t *pdeveui) {
}
// Function to do a byte swap in a byte array
void RevBytes(unsigned char *b, size_t c) {
void RevBytes(unsigned char* b, size_t c)
{
u1_t i;
for (i = 0; i < c / 2; i++) {
unsigned char t = b[i];
for (i = 0; i < c / 2; i++)
{ unsigned char t = b[i];
b[i] = b[c - 1 - i];
b[c - 1 - i] = t;
}
b[c - 1 - i] = t; }
}
void get_hard_deveui(uint8_t *pdeveui) {
@ -155,6 +155,31 @@ void do_send(osjob_t *j) {
#endif
sprintf(display_lmic, "PACKET QUEUED");
#ifdef HAS_GPS
static uint8_t gpsdata[18];
if (cfg.gpsmode && gps.location.isValid()) {
gps_read();
memcpy (gpsdata, mydata, 4);
memcpy (gpsdata+4, &gps_status, sizeof(gps_status));
ESP_LOGI(TAG, "lat=%.6f / lon=%.6f | %u Sats | HDOP=%.1f | Altitude=%u m", \
gps_status.latitude / (float) 1000000, \
gps_status.longitude / (float) 1000000, \
gps_status.satellites, \
gps_status.hdop / (float) 100, \
gps_status.altitude);
LMIC_setTxData2(COUNTERPORT, gpsdata, sizeof(gpsdata), (cfg.countermode & 0x02));
ESP_LOGI(TAG, "%d bytes queued to send", sizeof(gpsdata));
}
else {
#endif
LMIC_setTxData2(COUNTERPORT, mydata, sizeof(mydata), (cfg.countermode & 0x02));
ESP_LOGI(TAG, "%d bytes queued to send", sizeof(mydata));
sprintf(display_lmic, "PACKET QUEUED");
#ifdef HAS_GPS
}
#endif
// clear counter if not in cumulative counter mode
if (cfg.countermode != 1) {
reset_counters(); // clear macs container and reset all counters
@ -168,87 +193,50 @@ void onEvent(ev_t ev) {
char buff[24]="";
switch(ev) {
case EV_SCAN_TIMEOUT:
strcpy_P(buff, PSTR("SCAN TIMEOUT"));
break;
case EV_BEACON_FOUND:
strcpy_P(buff, PSTR("BEACON FOUND"));
break;
case EV_BEACON_MISSED:
strcpy_P(buff, PSTR("BEACON MISSED"));
break;
case EV_BEACON_TRACKED:
strcpy_P(buff, PSTR("BEACON TRACKED"));
break;
case EV_JOINING:
strcpy_P(buff, PSTR("JOINING"));
break;
case EV_LOST_TSYNC:
strcpy_P(buff, PSTR("LOST TSYNC"));
break;
case EV_RESET:
strcpy_P(buff, PSTR("RESET"));
break;
case EV_RXCOMPLETE:
strcpy_P(buff, PSTR("RX COMPLETE"));
break;
case EV_LINK_DEAD:
strcpy_P(buff, PSTR("LINK DEAD"));
break;
case EV_LINK_ALIVE:
strcpy_P(buff, PSTR("LINK ALIVE"));
break;
case EV_RFU1:
strcpy_P(buff, PSTR("RFUI"));
break;
case EV_JOIN_FAILED:
strcpy_P(buff, PSTR("JOIN FAILED"));
break;
case EV_REJOIN_FAILED:
strcpy_P(buff, PSTR("REJOIN FAILED"));
break;
case EV_SCAN_TIMEOUT: strcpy_P(buff, PSTR("SCAN TIMEOUT")); break;
case EV_BEACON_FOUND: strcpy_P(buff, PSTR("BEACON FOUND")); break;
case EV_BEACON_MISSED: strcpy_P(buff, PSTR("BEACON MISSED")); break;
case EV_BEACON_TRACKED: strcpy_P(buff, PSTR("BEACON TRACKED")); break;
case EV_JOINING: strcpy_P(buff, PSTR("JOINING")); break;
case EV_LOST_TSYNC: strcpy_P(buff, PSTR("LOST TSYNC")); break;
case EV_RESET: strcpy_P(buff, PSTR("RESET")); break;
case EV_RXCOMPLETE: strcpy_P(buff, PSTR("RX COMPLETE")); break;
case EV_LINK_DEAD: strcpy_P(buff, PSTR("LINK DEAD")); break;
case EV_LINK_ALIVE: strcpy_P(buff, PSTR("LINK ALIVE")); break;
case EV_RFU1: strcpy_P(buff, PSTR("RFUI")); break;
case EV_JOIN_FAILED: strcpy_P(buff, PSTR("JOIN FAILED")); break;
case EV_REJOIN_FAILED: strcpy_P(buff, PSTR("REJOIN FAILED")); break;
case EV_JOINED:
strcpy_P(buff, PSTR("JOINED"));
sprintf(display_lora,
" "); // clear previous lmic status message from display
sprintf(display_lora, " "); // clear previous lmic status message from display
// set data rate adaptation
LMIC_setAdrMode(cfg.adrmode);
// Set data rate and transmit power (note: txpower seems to be ignored by
// the library)
// Set data rate and transmit power (note: txpower seems to be ignored by the library)
switch_lora(cfg.lorasf,cfg.txpower);
// show effective LoRa parameters after join
ESP_LOGI(TAG, "ADR=%d, SF=%d, TXPOWER=%d", cfg.adrmode, cfg.lorasf,
cfg.txpower);
ESP_LOGI(TAG, "ADR=%d, SF=%d, TXPOWER=%d", cfg.adrmode, cfg.lorasf, cfg.txpower);
break;
case EV_TXCOMPLETE:
strcpy_P(buff, (LMIC.txrxFlags & TXRX_ACK) ? PSTR("RECEIVED ACK")
: PSTR("TX COMPLETE"));
sprintf(display_lora,
" "); // clear previous lmic status message from display
strcpy_P(buff, (LMIC.txrxFlags & TXRX_ACK) ? PSTR("RECEIVED ACK") : PSTR("TX COMPLETE"));
sprintf(display_lora, " "); // clear previous lmic status message from display
if (LMIC.dataLen) {
ESP_LOGI(TAG, "Received %d bytes of payload, RSSI %d SNR %d",
LMIC.dataLen, LMIC.rssi, (signed char)LMIC.snr / 4);
ESP_LOGI(TAG, "Received %d bytes of payload, RSSI %d SNR %d", LMIC.dataLen, LMIC.rssi, (signed char)LMIC.snr / 4);
// LMIC.snr = SNR twos compliment [dB] * 4
// LMIC.rssi = RSSI [dBm] (-196...+63)
sprintf(display_lora, "RSSI %d SNR %d", LMIC.rssi,
(signed char)LMIC.snr / 4);
sprintf(display_lora, "RSSI %d SNR %d", LMIC.rssi, (signed char)LMIC.snr / 4 );
// check if payload received on command port, then call remote command
// interpreter
if ((LMIC.txrxFlags & TXRX_PORT) &&
(LMIC.frame[LMIC.dataBeg - 1] == RCMDPORT)) {
// caution: buffering LMIC values here because rcommand() can modify
// LMIC.frame
// check if payload received on command port, then call remote command interpreter
if ( (LMIC.txrxFlags & TXRX_PORT) && (LMIC.frame[LMIC.dataBeg-1] == RCMDPORT ) ) {
// caution: buffering LMIC values here because rcommand() can modify LMIC.frame
unsigned char* buffer = new unsigned char[MAX_LEN_FRAME];
memcpy(buffer, LMIC.frame, MAX_LEN_FRAME); // Copy data from cfg to
// char*
memcpy(buffer, LMIC.frame, MAX_LEN_FRAME); //Copy data from cfg to char*
int i, k = LMIC.dataBeg, l = LMIC.dataBeg+LMIC.dataLen-2;
for (i=k; i<=l; i+=2) {
rcommand(buffer[i], buffer[i+1]);
@ -258,9 +246,7 @@ void onEvent(ev_t ev) {
}
break;
default:
sprintf_P(buff, PSTR("UNKNOWN EVENT %d"), ev);
break;
default: sprintf_P(buff, PSTR("UNKNOWN EVENT %d"), ev); break;
}
// Log & Display if asked
@ -270,3 +256,4 @@ void onEvent(ev_t ev) {
}
} // onEvent()

74
src/macsniff.cpp
View File

@ -9,17 +9,13 @@
// Local logging tag
static const char TAG[] = "wifi";
static wifi_country_t wifi_country = {.cc = WIFI_MY_COUNTRY,
.schan = WIFI_CHANNEL_MIN,
.nchan = WIFI_CHANNEL_MAX,
.policy = WIFI_COUNTRY_POLICY_MANUAL};
static wifi_country_t wifi_country = {.cc=WIFI_MY_COUNTRY, .schan=WIFI_CHANNEL_MIN, .nchan=WIFI_CHANNEL_MAX, .policy=WIFI_COUNTRY_POLICY_MANUAL};
// globals
uint16_t salt;
uint16_t reset_salt(void) {
salt = random(
65536); // get new 16bit random for salting hashes and set global salt var
salt = random(65536); // get new 16bit random for salting hashes and set global salt var
return salt;
}
@ -32,31 +28,23 @@ bool mac_add(uint8_t *paddr, int8_t rssi, bool sniff_type) {
// only last 3 MAC Address bytes are used for MAC address anonymization
// but since it's uint32 we take 4 bytes to avoid 1st value to be 0
addr2int = ((uint32_t)paddr[2]) | ((uint32_t)paddr[3] << 8) |
((uint32_t)paddr[4] << 16) | ((uint32_t)paddr[5] << 24);
addr2int = ( (uint32_t)paddr[2] ) | ( (uint32_t)paddr[3] << 8 ) | ( (uint32_t)paddr[4] << 16 ) | ( (uint32_t)paddr[5] << 24 );
#ifdef VENDORFILTER
vendor2int = ((uint32_t)paddr[2]) | ((uint32_t)paddr[1] << 8) |
((uint32_t)paddr[0] << 16);
vendor2int = ( (uint32_t)paddr[2] ) | ( (uint32_t)paddr[1] << 8 ) | ( (uint32_t)paddr[0] << 16 );
// use OUI vendor filter list only on Wifi, not on BLE
if ((sniff_type == MAC_SNIFF_BLE) ||
std::find(vendors.begin(), vendors.end(), vendor2int) != vendors.end()) {
if ( (sniff_type==MAC_SNIFF_BLE) || std::find(vendors.begin(), vendors.end(), vendor2int) != vendors.end() )
{
#endif
// salt and hash MAC, and if new unique one, store identifier in container
// and increment counter on display
// salt and hash MAC, and if new unique one, store identifier in container and increment counter on display
// https://en.wikipedia.org/wiki/MAC_Address_Anonymization
addr2int += (uint32_t)salt; // add 16-bit salt to pseudo MAC
snprintf(
buff, sizeof(buff), "%08X",
addr2int); // convert unsigned 32-bit salted MAC to 8 digit hex string
hashedmac = rokkit(&buff[3], 5); // hash MAC last string value, use 5 chars
// to fit hash in uint16_t container
auto newmac = macs.insert(
hashedmac); // add hashed MAC to total container if new unique
added = newmac.second ? true
: false; // true if hashed MAC is unique in container
snprintf(buff, sizeof(buff), "%08X", addr2int); // convert unsigned 32-bit salted MAC to 8 digit hex string
hashedmac = rokkit(&buff[3], 5); // hash MAC last string value, use 5 chars to fit hash in uint16_t container
auto newmac = macs.insert(hashedmac); // add hashed MAC to total container if new unique
added = newmac.second ? true:false; // true if hashed MAC is unique in container
// Count only if MAC was not yet seen
if (added) {
@ -78,39 +66,32 @@ bool mac_add(uint8_t *paddr, int8_t rssi, bool sniff_type) {
}
// Log scan result
ESP_LOGI(TAG,
"%s %s RSSI %ddBi -> MAC %s -> Hash %04X -> WiFi:%d BLTH:%d -> "
"%d Bytes left",
ESP_LOGI(TAG, "%s %s RSSI %ddBi -> MAC %s -> Hash %04X -> WiFi:%d BLTH:%d -> %d Bytes left",
added ? "new " : "known",
sniff_type == MAC_SNIFF_WIFI ? "WiFi" : "BLTH", rssi, buff,
hashedmac, macs_wifi, macs_ble, ESP.getFreeHeap());
sniff_type==MAC_SNIFF_WIFI ? "WiFi":"BLTH",
rssi, buff, hashedmac, macs_wifi, macs_ble,
ESP.getFreeHeap());
#ifdef VENDORFILTER
} else {
// Very noisy
// ESP_LOGD(TAG, "Filtered MAC %02X:%02X:%02X:%02X:%02X:%02X",
// paddr[0],paddr[1],paddr[2],paddr[3],paddr[5],paddr[5]);
// ESP_LOGD(TAG, "Filtered MAC %02X:%02X:%02X:%02X:%02X:%02X", paddr[0],paddr[1],paddr[2],paddr[3],paddr[5],paddr[5]);
}
#endif
// True if MAC WiFi/BLE was new
return added; // function returns bool if a new and unique Wifi or BLE mac was
// counted (true) or not (false)
return added; // function returns bool if a new and unique Wifi or BLE mac was counted (true) or not (false)
}
void wifi_sniffer_init(void) {
wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
cfg.nvs_enable = 0; // we don't need any wifi settings from NVRAM
wifi_promiscuous_filter_t filter = {
.filter_mask = WIFI_PROMIS_FILTER_MASK_MGMT}; // we need only MGMT frames
wifi_promiscuous_filter_t filter = {.filter_mask = WIFI_PROMIS_FILTER_MASK_MGMT}; // we need only MGMT frames
ESP_ERROR_CHECK(esp_wifi_init(&cfg)); // configure Wifi with cfg
ESP_ERROR_CHECK(
esp_wifi_set_country(&wifi_country)); // set locales for RF and channels
ESP_ERROR_CHECK(
esp_wifi_set_storage(WIFI_STORAGE_RAM)); // we don't need NVRAM
ESP_ERROR_CHECK(esp_wifi_set_country(&wifi_country)); // set locales for RF and channels
ESP_ERROR_CHECK(esp_wifi_set_storage(WIFI_STORAGE_RAM)); // we don't need NVRAM
//ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_NULL));
ESP_ERROR_CHECK(
esp_wifi_set_promiscuous_filter(&filter)); // set MAC frame filter
ESP_ERROR_CHECK(esp_wifi_set_promiscuous_filter(&filter)); // set MAC frame filter
ESP_ERROR_CHECK(esp_wifi_set_promiscuous_rx_cb(&wifi_sniffer_packet_handler));
ESP_ERROR_CHECK(esp_wifi_set_promiscuous(true)); // now switch on monitor mode
}
@ -120,19 +101,16 @@ void wifi_sniffer_set_channel(uint8_t channel) {
}
// using IRAM_:ATTR here to speed up callback function
IRAM_ATTR void wifi_sniffer_packet_handler(void *buff,
wifi_promiscuous_pkt_type_t type) {
IRAM_ATTR void wifi_sniffer_packet_handler(void* buff, wifi_promiscuous_pkt_type_t type) {
const wifi_promiscuous_pkt_t *ppkt = (wifi_promiscuous_pkt_t *)buff;
const wifi_ieee80211_packet_t *ipkt =
(wifi_ieee80211_packet_t *)ppkt->payload;
const wifi_ieee80211_packet_t *ipkt = (wifi_ieee80211_packet_t *)ppkt->payload;
const wifi_ieee80211_mac_hdr_t *hdr = &ipkt->hdr;
if ((cfg.rssilimit) &&
(ppkt->rx_ctrl.rssi < cfg.rssilimit)) { // rssi is negative value
ESP_LOGI(TAG, "WiFi RSSI %d -> ignoring (limit: %d)", ppkt->rx_ctrl.rssi,
cfg.rssilimit);
if ((cfg.rssilimit) && (ppkt->rx_ctrl.rssi < cfg.rssilimit )) { // rssi is negative value
ESP_LOGI(TAG, "WiFi RSSI %d -> ignoring (limit: %d)", ppkt->rx_ctrl.rssi, cfg.rssilimit);
} else {
uint8_t *p = (uint8_t *) hdr->addr2;
mac_add(p, ppkt->rx_ctrl.rssi, MAC_SNIFF_WIFI) ;
}
}

12
src/main.h
View File

@ -10,7 +10,10 @@
//--- Declarations ---
enum led_states { LED_OFF, LED_ON };
enum led_states {
LED_OFF,
LED_ON
};
#if defined(CFG_eu868)
const char lora_datarate[] = {"1211100908077BFSNA"};
@ -25,6 +28,7 @@ void reset_counters(void);
void blink_LED(uint16_t set_color, uint16_t set_blinkduration);
void led_loop(void);
// defined in blescan.cpp
#ifdef BLECOUNTER
void start_BLEscan(void);
@ -33,6 +37,12 @@ void stop_BLEscan(void);
//defined in gpsread.cpp
#ifdef HAS_GPS
<<<<<<< HEAD
void gps_read(void);
void gps_loop(void *pvParameters);
#endif
=======
void gps_read(void);
void gps_loop(void * pvParameters);
#endif
>>>>>>> master

185
src/rcommand.cpp
View File

@ -1,14 +1,13 @@
// remote command interpreter
// parses multiple number of command / value pairs from LoRaWAN remote command
// port (RCMDPORT) checks commands and executes each command with 1 argument per
// command
// parses multiple number of command / value pairs from LoRaWAN remote command port (RCMDPORT)
// checks commands and executes each command with 1 argument per command
// Basic Config
#include "globals.h"
// LMIC-Arduino LoRaWAN Stack
#include <hal/hal.h>
#include <lmic.h>
#include <hal/hal.h>
// Local logging tag
static const char TAG[] = "main";
@ -32,22 +31,18 @@ uint32_t read_voltage(void);
// function sends result of get commands to LoRaWAN network
void do_transmit(osjob_t* j){
// check if there is a pending TX/RX job running, if yes then reschedule
// transmission
// check if there is a pending TX/RX job running, if yes then reschedule transmission
if (LMIC.opmode & OP_TXRXPEND) {
ESP_LOGI(TAG, "LoRa busy, rescheduling");
sprintf(display_lmic, "LORA BUSY");
os_setTimedCallback(&rcmdjob, os_getTime() + sec2osticks(RETRANSMIT_RCMD),
do_transmit);
os_setTimedCallback(&rcmdjob, os_getTime()+sec2osticks(RETRANSMIT_RCMD), do_transmit);
}
LMIC_setTxData2(RCMDPORT, rcmd_data, rcmd_data_size,
0); // send data unconfirmed on RCMD Port
LMIC_setTxData2(RCMDPORT, rcmd_data, rcmd_data_size, 0); // send data unconfirmed on RCMD Port
ESP_LOGI(TAG, "%d bytes queued to send", rcmd_data_size);
sprintf(display_lmic, "PACKET QUEUED");
}
// help function to transmit result of get commands, since callback function
// do_transmit() cannot have params
// help function to transmit result of get commands, since callback function do_transmit() cannot have params
void transmit(xref2u1_t mydata, u1_t mydata_size){
rcmd_data = mydata;
rcmd_data_size = mydata_size;
@ -56,48 +51,26 @@ void transmit(xref2u1_t mydata, u1_t mydata_size) {
// help function to assign LoRa datarates to numeric spreadfactor values
void switch_lora (uint8_t sf, uint8_t tx) {
if (tx > 20)
return;
if ( tx > 20 ) return;
cfg.txpower = tx;
switch (sf) {
case 7:
LMIC_setDrTxpow(DR_SF7, tx);
cfg.lorasf = sf;
break;
case 8:
LMIC_setDrTxpow(DR_SF8, tx);
cfg.lorasf = sf;
break;
case 9:
LMIC_setDrTxpow(DR_SF9, tx);
cfg.lorasf = sf;
break;
case 10:
LMIC_setDrTxpow(DR_SF10, tx);
cfg.lorasf = sf;
break;
case 7: LMIC_setDrTxpow(DR_SF7,tx); cfg.lorasf=sf; break;
case 8: LMIC_setDrTxpow(DR_SF8,tx); cfg.lorasf=sf; break;
case 9: LMIC_setDrTxpow(DR_SF9,tx); cfg.lorasf=sf; break;
case 10: LMIC_setDrTxpow(DR_SF10,tx); cfg.lorasf=sf; break;
case 11:
#if defined(CFG_eu868)
LMIC_setDrTxpow(DR_SF11, tx);
cfg.lorasf = sf;
break;
LMIC_setDrTxpow(DR_SF11,tx); cfg.lorasf=sf; break;
#elif defined(CFG_us915)
LMIC_setDrTxpow(DR_SF11CR, tx);
cfg.lorasf = sf;
break;
LMIC_setDrTxpow(DR_SF11CR,tx); cfg.lorasf=sf; break;
#endif
case 12:
#if defined(CFG_eu868)
LMIC_setDrTxpow(DR_SF12, tx);
cfg.lorasf = sf;
break;
LMIC_setDrTxpow(DR_SF12,tx); cfg.lorasf=sf; break;
#elif defined(CFG_us915)
LMIC_setDrTxpow(DR_SF12CR, tx);
cfg.lorasf = sf;
break;
LMIC_setDrTxpow(DR_SF12CR,tx); cfg.lorasf=sf; break;
#endif
default:
break;
default: break;
}
}
@ -107,9 +80,7 @@ void set_reset(uint8_t val) {
case 0: // restart device
ESP_LOGI(TAG, "Remote command: restart device");
sprintf(display_lora, "Reset pending");
vTaskDelay(
10000 /
portTICK_PERIOD_MS); // wait for LMIC to confirm LoRa downlink to server
vTaskDelay(10000/portTICK_PERIOD_MS); // wait for LMIC to confirm LoRa downlink to server
esp_restart();
break;
case 1: // reset MAC counter
@ -133,28 +104,23 @@ void set_rssi(uint8_t val) {
void set_sendcycle(uint8_t val) {
cfg.sendcycle = val;
ESP_LOGI(TAG, "Remote command: set payload send cycle to %d seconds",
cfg.sendcycle * 2);
ESP_LOGI(TAG, "Remote command: set payload send cycle to %d seconds", cfg.sendcycle*2);
};
void set_wifichancycle(uint8_t val) {
cfg.wifichancycle = val;
// modify wifi channel rotation IRQ
timerAlarmWrite(
channelSwitch, cfg.wifichancycle * 10000,
true); // reload interrupt after each trigger of channel switch cycle
ESP_LOGI(TAG,
"Remote command: set Wifi channel switch interval to %.1f seconds",
cfg.wifichancycle / float(100));
timerAlarmWrite(channelSwitch, cfg.wifichancycle * 10000, true); // reload interrupt after each trigger of channel switch cycle
ESP_LOGI(TAG, "Remote command: set Wifi channel switch interval to %.1f seconds", cfg.wifichancycle/float(100));
};
void set_blescantime(uint8_t val) {
cfg.blescantime = val;
ESP_LOGI(TAG, "Remote command: set BLE scan time to %.1f seconds",
cfg.blescantime / float(100));
ESP_LOGI(TAG, "Remote command: set BLE scan time to %.1f seconds", cfg.blescantime/float(100));
#ifdef BLECOUNTER
// stop & restart BLE scan task to apply new parameter
if (cfg.blescan) {
if (cfg.blescan)
{
stop_BLEscan();
start_BLEscan();
}
@ -181,36 +147,24 @@ void set_countmode(uint8_t val) {
void set_screensaver(uint8_t val) {
ESP_LOGI(TAG, "Remote command: set screen saver to %s ", val ? "on" : "off");
switch (val) {
case 1:
cfg.screensaver = val;
break;
default:
cfg.screensaver = 0;
break;
case 1: cfg.screensaver = val; break;
default: cfg.screensaver = 0; break;
}
};
void set_display(uint8_t val) {
ESP_LOGI(TAG, "Remote command: set screen to %s", val ? "on" : "off");
switch (val) {
case 1:
cfg.screenon = val;
break;
default:
cfg.screenon = 0;
break;
case 1: cfg.screenon = val; break;
default: cfg.screenon = 0; break;
}
};
void set_gps(uint8_t val) {
ESP_LOGI(TAG, "Remote command: set GPS to %s", val ? "on" : "off");
switch (val) {
case 1:
cfg.gpsmode = val;
break;
default:
cfg.gpsmode = 0;
break;
case 1: cfg.gpsmode = val; break;
default: cfg.gpsmode = 0; break;
}
};
@ -222,12 +176,8 @@ void set_lorasf(uint8_t val) {
void set_loraadr(uint8_t val) {
ESP_LOGI(TAG, "Remote command: set LoRa ADR mode to %s", val ? "on" : "off");
switch (val) {
case 1:
cfg.adrmode = val;
break;
default:
cfg.adrmode = 0;
break;
case 1: cfg.adrmode = val; break;
default: cfg.adrmode = 0; break;
}
LMIC_setAdrMode(cfg.adrmode);
};
@ -252,15 +202,10 @@ void set_blescan(uint8_t val) {
};
void set_wifiant(uint8_t val) {
ESP_LOGI(TAG, "Remote command: set Wifi antenna to %s",
val ? "external" : "internal");
ESP_LOGI(TAG, "Remote command: set Wifi antenna to %s", val ? "external" : "internal");
switch (val) {
case 1:
cfg.wifiant = val;
break;
default:
cfg.wifiant = 0;
break;
case 1: cfg.wifiant = val; break;
default: cfg.wifiant = 0; break;
}
#ifdef HAS_ANTENNA_SWITCH
antenna_select(cfg.wifiant);
@ -268,15 +213,10 @@ void set_wifiant(uint8_t val) {
};
void set_vendorfilter(uint8_t val) {
ESP_LOGI(TAG, "Remote command: set vendorfilter mode to %s",
val ? "on" : "off");
ESP_LOGI(TAG, "Remote command: set vendorfilter mode to %s", val ? "on" : "off");
switch (val) {
case 1:
cfg.vendorfilter = val;
break;
default:
cfg.vendorfilter = 0;
break;
case 1: cfg.vendorfilter = val; break;
default: cfg.vendorfilter = 0; break;
}
};
@ -322,9 +262,7 @@ void get_gps(uint8_t val) {
#ifdef HAS_GPS
gps_read();
transmit((byte*)&gps_status, sizeof(gps_status));
ESP_LOGI(TAG, "lat=%f / lon=%f | Sats=%u | HDOP=%u | Alti=%u",
gps_status.latitude / 1000000, gps_status.longitude / 1000000,
gps_status.satellites, gps_status.hdop, gps_status.altitude);
ESP_LOGI(TAG, "lat=%f / lon=%f | Sats=%u | HDOP=%u | Alti=%u", gps_status.latitude / 1000000, gps_status.longitude / 1000000, gps_status.satellites, gps_status.hdop, gps_status.altitude);
#else
ESP_LOGE(TAG, "GPS not present");
#endif
@ -333,33 +271,40 @@ void get_gps(uint8_t val) {
// assign previously defined functions to set of numeric remote commands
// format: opcode, function, flag (1 = do make settings persistent / 0 = don't)
//
cmd_t table[] = {{0x01, set_rssi, true}, {0x02, set_countmode, true},
{0x03, set_gps, true}, {0x04, set_display, true},
{0x05, set_lorasf, true}, {0x06, set_lorapower, true},
{0x07, set_loraadr, true}, {0x08, set_screensaver, true},
{0x09, set_reset, false}, {0x0a, set_sendcycle, true},
{0x0b, set_wifichancycle, true}, {0x0c, set_blescantime, true},
{0x0d, set_vendorfilter, false}, {0x0e, set_blescan, true},
{0x0f, set_wifiant, true}, {0x10, set_rgblum, true},
{0x80, get_config, false}, {0x81, get_uptime, false},
{0x82, get_cputemp, false}, {0x83, get_voltage, false},
{0x84, get_gps, false}};
cmd_t table[] = {
{0x01, set_rssi, true},
{0x02, set_countmode, true},
{0x03, set_gps, true},
{0x04, set_display, true},
{0x05, set_lorasf, true},
{0x06, set_lorapower, true},
{0x07, set_loraadr, true},
{0x08, set_screensaver, true},
{0x09, set_reset, false},
{0x0a, set_sendcycle, true},
{0x0b, set_wifichancycle, true},
{0x0c, set_blescantime, true},
{0x0d, set_vendorfilter, false},
{0x0e, set_blescan, true},
{0x0f, set_wifiant, true},
{0x10, set_rgblum, true},
{0x80, get_config, false},
{0x81, get_uptime, false},
{0x82, get_cputemp, false},
{0x83, get_voltage, false},
{0x84, get_gps, false}
};
// check and execute remote command
void rcommand(uint8_t cmd, uint8_t arg) {
int i =
sizeof(table) / sizeof(table[0]); // number of commands in command table
int i = sizeof(table) / sizeof(table[0]); // number of commands in command table
bool store_flag = false;
while(i--) {
if(cmd == table[i].nam) { // check if valid command
table[i].func(arg); // then execute assigned function
if (table[i].store)
store_flag =
true; // set save flag if function needs to store configuration
if ( table[i].store ) store_flag = true; // set save flag if function needs to store configuration
break; // exit check loop, since command was found
}
}
if (store_flag)
saveConfig(); // if save flag is set: store new configuration in NVS to make
// it persistent
if (store_flag) saveConfig(); // if save flag is set: store new configuration in NVS to make it persistent
}

13
src/rgb_led.cpp
View File

@ -6,7 +6,8 @@
// RGB Led instance
SmartLed rgb_led(LED_WS2812, 1, HAS_RGB_LED);
float rgb_CalcColor(float p, float q, float t) {
float rgb_CalcColor(float p, float q, float t)
{
if (t < 0.0f)
t += 1.0f;
if (t > 1.0f)
@ -29,15 +30,19 @@ float rgb_CalcColor(float p, float q, float t) {
// HslColor using H, S, L values (0.0 - 1.0)
// L should be limited to between (0.0 - 0.5)
// ------------------------------------------------------------------------
RGBColor rgb_hsl2rgb(float h, float s, float l) {
RGBColor rgb_hsl2rgb(float h, float s, float l)
{
RGBColor RGB_color;
float r;
float g;
float b;
if (s == 0.0f || l == 0.0f) {
if (s == 0.0f || l == 0.0f)
{
r = g = b = l; // achromatic or black
} else {
}
else
{
float q = l < 0.5f ? l * (1.0f + s) : l + s - (l * s);
float p = 2.0f * l - q;
r = rgb_CalcColor(p, q, h + 1.0f / 3.0f);

3
src/rgb_led.h
View File

@ -19,7 +19,8 @@
#define COLOR_WHITE 360
#define COLOR_NONE 999
struct RGBColor {
struct RGBColor
{
uint8_t R;
uint8_t G;
uint8_t B;

12
src/rokkithash.cpp
View File

@ -40,8 +40,7 @@ uint32_t rokkit(const char *data, int len) {
uint32_t hash, tmp;
int rem;
if (len <= 0 || data == 0)
return 0;
if (len <= 0 || data == 0) return 0;
hash = len;
rem = len & 3;
len >>= 2;
@ -58,19 +57,16 @@ uint32_t rokkit(const char *data, int len) {
/* Handle end cases */
switch (rem) {
case 3:
hash += *((uint16_t *)data);
case 3: hash += *((uint16_t*)data);
hash ^= hash << 16;
hash ^= ((signed char)data[2]) << 18;
hash += hash >> 11;
break;
case 2:
hash += *((uint16_t *)data);
case 2: hash += *((uint16_t*)data);
hash ^= hash << 11;
hash += hash >> 17;
break;
case 1:
hash += (signed char)*data;
case 1: hash += (signed char)*data;
hash ^= hash << 10;
hash += hash >> 1;
}

1639
src/vendor_array.h
View File

File diff suppressed because it is too large Load Diff