v1.3.81 merge
This commit is contained in:
Klaus K Wilting committed
commit
39f707583f
28 files changed
+2595
-1610
No files matched your search
+12
-12
@@ -1,19 +1,19 @@
|
||||
// Hardware related definitions for Pycom FiPy Board
|
||||
|
||||
#define CFG_sx1272_radio 1
|
||||
#define HAS_LED NOT_A_PIN // FiPy has no on board LED, so we use RGB LED
|
||||
#define HAS_RGB_LED GPIO_NUM_0 // WS2812B RGB LED on GPIO0
|
||||
#define HAS_LED NOT_A_PIN // FiPy has no on board LED, so we use RGB LED
|
||||
#define HAS_RGB_LED GPIO_NUM_0 // WS2812B RGB LED on GPIO0
|
||||
|
||||
// Hardware pin definitions for Pycom FiPy board
|
||||
#define PIN_SPI_SS GPIO_NUM_18
|
||||
#define PIN_SPI_MOSI GPIO_NUM_27
|
||||
#define PIN_SPI_MISO GPIO_NUM_19
|
||||
#define PIN_SPI_SCK GPIO_NUM_5
|
||||
#define RST LMIC_UNUSED_PIN
|
||||
#define DIO0 GPIO_NUM_23 // LoRa IRQ
|
||||
#define DIO1 GPIO_NUM_23 // workaround
|
||||
#define DIO2 LMIC_UNUSED_PIN
|
||||
#define PIN_SPI_SS GPIO_NUM_18
|
||||
#define PIN_SPI_MOSI GPIO_NUM_27
|
||||
#define PIN_SPI_MISO GPIO_NUM_19
|
||||
#define PIN_SPI_SCK GPIO_NUM_5
|
||||
#define RST LMIC_UNUSED_PIN
|
||||
#define DIO0 GPIO_NUM_23 // LoRa IRQ
|
||||
#define DIO1 GPIO_NUM_23 // workaround
|
||||
#define DIO2 LMIC_UNUSED_PIN
|
||||
|
||||
// select WIFI antenna (internal = onboard / external = u.fl socket)
|
||||
#define HAS_ANTENNA_SWITCH GPIO_NUM_21 // pin for switching wifi antenna
|
||||
#define WIFI_ANTENNA 0 // 0 = internal, 1 = external
|
||||
#define HAS_ANTENNA_SWITCH GPIO_NUM_21 // pin for switching wifi antenna
|
||||
#define WIFI_ANTENNA 0 // 0 = internal, 1 = external
|
||||
+10
-24
@@ -4,36 +4,22 @@
|
||||
|
||||
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board
|
||||
//#define DISPLAY_FLIP 1 // uncomment this for rotated display
|
||||
#define HAS_LED GPIO_NUM_25 // white LED on board
|
||||
#define HAS_LED GPIO_NUM_25 // white LED on board
|
||||
#define HAS_BUTTON GPIO_NUM_0 // button "PROG" on board
|
||||
|
||||
// re-define pin definitions of pins_arduino.h
|
||||
#define PIN_SPI_SS \
|
||||
GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- SX1276 NSS (Pin19) SPI Chip Select
|
||||
// Input
|
||||
#define PIN_SPI_MOSI \
|
||||
GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- SX1276 MOSI (Pin18) SPI Data Input
|
||||
#define PIN_SPI_MISO \
|
||||
GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- SX1276 MISO (Pin17) SPI Data Output
|
||||
#define PIN_SPI_SCK \
|
||||
GPIO_NUM_5 // ESP32 GPIO5 (Pin5) -- SX1276 SCK (Pin16) SPI Clock Input
|
||||
#define PIN_SPI_SS GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- SX1276 NSS (Pin19) SPI Chip Select Input
|
||||
#define PIN_SPI_MOSI GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- SX1276 MOSI (Pin18) SPI Data Input
|
||||
#define PIN_SPI_MISO GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- SX1276 MISO (Pin17) SPI Data Output
|
||||
#define PIN_SPI_SCK GPIO_NUM_5 // ESP32 GPIO5 (Pin5) -- SX1276 SCK (Pin16) SPI Clock Input
|
||||
|
||||
// non arduino pin definitions
|
||||
#define RST \
|
||||
GPIO_NUM_14 // ESP32 GPIO14 (Pin14) -- SX1276 NRESET (Pin7) Reset Trigger
|
||||
// Input
|
||||
#define DIO0 \
|
||||
GPIO_NUM_26 // ESP32 GPIO26 (Pin15) -- SX1276 DIO0 (Pin8) used by LMIC for
|
||||
// detecting LoRa RX_Done & TX_Done
|
||||
#define DIO1 \
|
||||
GPIO_NUM_33 // ESP32 GPIO33 (Pin13) -- SX1276 DIO1 (Pin9) used by LMIC for
|
||||
// detecting LoRa RX_Timeout
|
||||
#define DIO2 \
|
||||
LMIC_UNUSED_PIN // 32 ESP32 GPIO32 (Pin12) -- SX1276 DIO2 (Pin10) not used by
|
||||
// LMIC for LoRa (Timeout for FSK only)
|
||||
#define RST GPIO_NUM_14 // ESP32 GPIO14 (Pin14) -- SX1276 NRESET (Pin7) Reset Trigger Input
|
||||
#define DIO0 GPIO_NUM_26 // ESP32 GPIO26 (Pin15) -- SX1276 DIO0 (Pin8) used by LMIC for detecting LoRa RX_Done & TX_Done
|
||||
#define DIO1 GPIO_NUM_33 // ESP32 GPIO33 (Pin13) -- SX1276 DIO1 (Pin9) used by LMIC for detecting LoRa RX_Timeout
|
||||
#define DIO2 LMIC_UNUSED_PIN // 32 ESP32 GPIO32 (Pin12) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)
|
||||
|
||||
// Hardware pin definitions for Heltec LoRa-32 Board with OLED SSD1306 I2C
|
||||
// Display
|
||||
// Hardware pin definitions for Heltec LoRa-32 Board with OLED SSD1306 I2C Display
|
||||
#define OLED_RST GPIO_NUM_16 // ESP32 GPIO16 (Pin16) -- SD1306 RST
|
||||
#define OLED_SDA GPIO_NUM_4 // ESP32 GPIO4 (Pin4) -- SD1306 D1+D2
|
||||
#define OLED_SCL GPIO_NUM_15 // ESP32 GPIO15 (Pin15) -- SD1306 D0
|
||||
+19
-36
@@ -6,50 +6,33 @@
|
||||
|
||||
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board
|
||||
//#define DISPLAY_FLIP 1 // uncomment this for rotated display
|
||||
#define HAS_LED \
|
||||
NOT_A_PIN // Led os on same pin as Lora SS pin, to avoid problems, we don't
|
||||
// use it
|
||||
#define LED_ACTIVE_LOW \
|
||||
1 // Onboard LED is active when pin is LOW
|
||||
// Anyway shield is on over the LoLin32 board, so we won't be able to see
|
||||
// this LED
|
||||
#define HAS_RGB_LED 13 // ESP32 GPIO13 (pin13) On Board Shield WS2812B RGB LED
|
||||
#define HAS_BUTTON 15 // ESP32 GPIO15 (pin15) Button is on the LoraNode32 shield
|
||||
#define BUTTON_PULLUP 1 // Button need pullup instead of default pulldown
|
||||
#define HAS_LED NOT_A_PIN // Led os on same pin as Lora SS pin, to avoid problems, we don't use it
|
||||
#define LED_ACTIVE_LOW 1 // Onboard LED is active when pin is LOW
|
||||
// Anyway shield is on over the LoLin32 board, so we won't be able to see this LED
|
||||
#define HAS_RGB_LED 13 // ESP32 GPIO13 (pin13) On Board Shield WS2812B RGB LED
|
||||
#define HAS_BUTTON 15 // ESP32 GPIO15 (pin15) Button is on the LoraNode32 shield
|
||||
#define BUTTON_PULLUP 1 // Button need pullup instead of default pulldown
|
||||
|
||||
#define CFG_sx1276_radio 1 // RFM95 module
|
||||
|
||||
// re-define pin definitions of pins_arduino.h
|
||||
#define PIN_SPI_SS \
|
||||
5 // ESP32 GPIO5 (Pin5) -- SX1276 NSS (Pin19) SPI Chip Select Input
|
||||
#define PIN_SPI_MOSI \
|
||||
23 // ESP32 GPIO23 (Pin23) -- SX1276 MOSI (Pin18) SPI Data Input
|
||||
#define PIN_SPI_MISO \
|
||||
19 // ESP32 GPIO19 (Pin19) -- SX1276 MISO (Pin17) SPI Data Output
|
||||
#define PIN_SPI_SCK \
|
||||
18 // ESP32 GPIO18 (Pin18 -- SX1276 SCK (Pin16) SPI Clock Input
|
||||
#define PIN_SPI_SS 5 // ESP32 GPIO5 (Pin5) -- SX1276 NSS (Pin19) SPI Chip Select Input
|
||||
#define PIN_SPI_MOSI 23 // ESP32 GPIO23 (Pin23) -- SX1276 MOSI (Pin18) SPI Data Input
|
||||
#define PIN_SPI_MISO 19 // ESP32 GPIO19 (Pin19) -- SX1276 MISO (Pin17) SPI Data Output
|
||||
#define PIN_SPI_SCK 18 // ESP32 GPIO18 (Pin18 -- SX1276 SCK (Pin16) SPI Clock Input
|
||||
|
||||
// non arduino pin definitions
|
||||
#define RST \
|
||||
25 // ESP32 GPIO25 (Pin25) -- SX1276 NRESET (Pin7) Reset Trigger Input
|
||||
#define DIO0 \
|
||||
27 // ESP32 GPIO27 (Pin27) -- SX1276 DIO0 (Pin8) used by LMIC for detecting
|
||||
// LoRa RX_Done & TX_Done
|
||||
#define DIO1 \
|
||||
26 // ESP32 GPIO26 (Pin26) -- SX1276 DIO1 (Pin9) used by LMIC for detecting
|
||||
// LoRa RX_Timeout
|
||||
#define DIO2 \
|
||||
LMIC_UNUSED_PIN // 4 ESP32 GPIO4 (Pin4) -- SX1276 DIO2 (Pin10) not used by
|
||||
// LMIC for LoRa (Timeout for FSK only)
|
||||
#define DIO5 \
|
||||
LMIC_UNUSED_PIN // 35 ESP32 GPIO35 (Pin35) -- SX1276 DIO5 not used by LMIC
|
||||
// for LoRa (Timeout for FSK only)
|
||||
#define RST 25 // ESP32 GPIO25 (Pin25) -- SX1276 NRESET (Pin7) Reset Trigger Input
|
||||
#define DIO0 27 // ESP32 GPIO27 (Pin27) -- SX1276 DIO0 (Pin8) used by LMIC for detecting LoRa RX_Done & TX_Done
|
||||
#define DIO1 26 // ESP32 GPIO26 (Pin26) -- SX1276 DIO1 (Pin9) used by LMIC for detecting LoRa RX_Timeout
|
||||
#define DIO2 LMIC_UNUSED_PIN // 4 ESP32 GPIO4 (Pin4) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)
|
||||
#define DIO5 LMIC_UNUSED_PIN // 35 ESP32 GPIO35 (Pin35) -- SX1276 DIO5 not used by LMIC for LoRa (Timeout for FSK only)
|
||||
|
||||
// Hardware pin definitions for LoRaNode32 Board with OLED I2C Display
|
||||
#define OLED_RST U8X8_PIN_NONE // Not reset pin
|
||||
#define OLED_SDA 21 // ESP32 GPIO21 (Pin21) -- OLED SDA
|
||||
#define OLED_SCL 22 // ESP32 GPIO22 (Pin22) -- OLED SCL
|
||||
#define OLED_RST U8X8_PIN_NONE // Not reset pin
|
||||
#define OLED_SDA 21 // ESP32 GPIO21 (Pin21) -- OLED SDA
|
||||
#define OLED_SCL 22 // ESP32 GPIO22 (Pin22) -- OLED SCL
|
||||
|
||||
// I2C config for Microchip 24AA02E64 DEVEUI unique address
|
||||
#define MCP_24AA02E64_I2C_ADDRESS 0x50 // I2C address for the 24AA02E64
|
||||
#define MCP_24AA02E64_I2C_ADDRESS 0x50 // I2C address for the 24AA02E64
|
||||
#define MCP_24AA02E64_MAC_ADDRESS 0xF8 // Memory adress of unique deveui 64 bits
|
||||
+18
-31
@@ -6,45 +6,32 @@
|
||||
|
||||
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board
|
||||
//#define DISPLAY_FLIP 1 // uncomment this for rotated display
|
||||
#define HAS_LED 22 // ESP32 GPIO12 (pin22) On Board LED
|
||||
#define LED_ACTIVE_LOW 1 // Onboard LED is active when pin is LOW
|
||||
#define HAS_RGB_LED 13 // ESP32 GPIO13 (pin13) On Board Shield WS2812B RGB LED
|
||||
#define HAS_BUTTON 15 // ESP32 GPIO15 (pin15) Button is on the LoraNode32 shield
|
||||
#define BUTTON_PULLUP 1 // Button need pullup instead of default pulldown
|
||||
#define HAS_LED 22 // ESP32 GPIO12 (pin22) On Board LED
|
||||
#define LED_ACTIVE_LOW 1 // Onboard LED is active when pin is LOW
|
||||
#define HAS_RGB_LED 13 // ESP32 GPIO13 (pin13) On Board Shield WS2812B RGB LED
|
||||
#define HAS_BUTTON 15 // ESP32 GPIO15 (pin15) Button is on the LoraNode32 shield
|
||||
#define BUTTON_PULLUP 1 // Button need pullup instead of default pulldown
|
||||
|
||||
#define CFG_sx1276_radio 1 // RFM95 module
|
||||
|
||||
// re-define pin definitions of pins_arduino.h
|
||||
#define PIN_SPI_SS \
|
||||
5 // ESP32 GPIO5 (Pin5) -- SX1276 NSS (Pin19) SPI Chip Select Input
|
||||
#define PIN_SPI_MOSI \
|
||||
23 // ESP32 GPIO23 (Pin23) -- SX1276 MOSI (Pin18) SPI Data Input
|
||||
#define PIN_SPI_MISO \
|
||||
19 // ESP32 GPIO19 (Pin19) -- SX1276 MISO (Pin17) SPI Data Output
|
||||
#define PIN_SPI_SCK \
|
||||
18 // ESP32 GPIO18 (Pin18 -- SX1276 SCK (Pin16) SPI Clock Input
|
||||
#define PIN_SPI_SS 5 // ESP32 GPIO5 (Pin5) -- SX1276 NSS (Pin19) SPI Chip Select Input
|
||||
#define PIN_SPI_MOSI 23 // ESP32 GPIO23 (Pin23) -- SX1276 MOSI (Pin18) SPI Data Input
|
||||
#define PIN_SPI_MISO 19 // ESP32 GPIO19 (Pin19) -- SX1276 MISO (Pin17) SPI Data Output
|
||||
#define PIN_SPI_SCK 18 // ESP32 GPIO18 (Pin18 -- SX1276 SCK (Pin16) SPI Clock Input
|
||||
|
||||
// non arduino pin definitions
|
||||
#define RST \
|
||||
25 // ESP32 GPIO25 (Pin25) -- SX1276 NRESET (Pin7) Reset Trigger Input
|
||||
#define DIO0 \
|
||||
27 // ESP32 GPIO27 (Pin27) -- SX1276 DIO0 (Pin8) used by LMIC for detecting
|
||||
// LoRa RX_Done & TX_Done
|
||||
#define DIO1 \
|
||||
26 // ESP32 GPIO26 (Pin26) -- SX1276 DIO1 (Pin9) used by LMIC for detecting
|
||||
// LoRa RX_Timeout
|
||||
#define DIO2 \
|
||||
LMIC_UNUSED_PIN // 4 ESP32 GPIO4 (Pin4) -- SX1276 DIO2 (Pin10) not used by
|
||||
// LMIC for LoRa (Timeout for FSK only)
|
||||
#define DIO5 \
|
||||
LMIC_UNUSED_PIN // 35 ESP32 GPIO35 (Pin35) -- SX1276 DIO5 not used by LMIC
|
||||
// for LoRa (Timeout for FSK only)
|
||||
#define RST 25 // ESP32 GPIO25 (Pin25) -- SX1276 NRESET (Pin7) Reset Trigger Input
|
||||
#define DIO0 27 // ESP32 GPIO27 (Pin27) -- SX1276 DIO0 (Pin8) used by LMIC for detecting LoRa RX_Done & TX_Done
|
||||
#define DIO1 26 // ESP32 GPIO26 (Pin26) -- SX1276 DIO1 (Pin9) used by LMIC for detecting LoRa RX_Timeout
|
||||
#define DIO2 LMIC_UNUSED_PIN // 4 ESP32 GPIO4 (Pin4) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)
|
||||
#define DIO5 LMIC_UNUSED_PIN // 35 ESP32 GPIO35 (Pin35) -- SX1276 DIO5 not used by LMIC for LoRa (Timeout for FSK only)
|
||||
|
||||
// Hardware pin definitions for LoRaNode32 Board with OLED I2C Display
|
||||
#define OLED_RST U8X8_PIN_NONE // Not reset pin
|
||||
#define OLED_SDA 14 // ESP32 GPIO14 (Pin14) -- OLED SDA
|
||||
#define OLED_SCL 12 // ESP32 GPIO12 (Pin12) -- OLED SCL
|
||||
#define OLED_RST U8X8_PIN_NONE // Not reset pin
|
||||
#define OLED_SDA 14 // ESP32 GPIO14 (Pin14) -- OLED SDA
|
||||
#define OLED_SCL 12 // ESP32 GPIO12 (Pin12) -- OLED SCL
|
||||
|
||||
// I2C config for Microchip 24AA02E64 DEVEUI unique address
|
||||
#define MCP_24AA02E64_I2C_ADDRESS 0x50 // I2C address for the 24AA02E64
|
||||
#define MCP_24AA02E64_I2C_ADDRESS 0x50 // I2C address for the 24AA02E64
|
||||
#define MCP_24AA02E64_MAC_ADDRESS 0xF8 // Memory adress of unique deveui 64 bits
|
||||
+13
-15
@@ -1,14 +1,12 @@
|
||||
// Hardware related definitions for Pycom LoPy Board (not: LoPy4)
|
||||
|
||||
#define CFG_sx1272_radio 1
|
||||
#define HAS_LED \
|
||||
NOT_A_PIN // LoPy4 has no on board LED, so we use RGB LED on LoPy4
|
||||
#define HAS_RGB_LED GPIO_NUM_0 // WS2812B RGB LED on GPIO0
|
||||
#define HAS_LED NOT_A_PIN // LoPy4 has no on board LED, so we use RGB LED on LoPy4
|
||||
#define HAS_RGB_LED GPIO_NUM_0 // WS2812B RGB LED on GPIO0
|
||||
|
||||
// !!EXPERIMENTAL - not tested yet!!
|
||||
// uncomment this only if your LoPy lives on a Pytrack expansion board with GPS
|
||||
// see
|
||||
// http://www.quectel.com/UploadImage/Downlad/Quectel_L76-L_I2C_Application_Note_V1.0.pdf
|
||||
// see http://www.quectel.com/UploadImage/Downlad/Quectel_L76-L_I2C_Application_Note_V1.0.pdf
|
||||
//#define HAS_GPS 1
|
||||
//#define GPS_I2C_PINS GPIO_NUM_9, GPIO_NUM_8 // SDA, SCL
|
||||
//#define GPS_I2C_ADDRESS_READ 0x21
|
||||
@@ -16,15 +14,15 @@
|
||||
//#define HAS_BUTTON GPIO_NUM_4
|
||||
|
||||
// Hardware pin definitions for Pycom LoPy board
|
||||
#define PIN_SPI_SS GPIO_NUM_17
|
||||
#define PIN_SPI_MOSI GPIO_NUM_27
|
||||
#define PIN_SPI_MISO GPIO_NUM_19
|
||||
#define PIN_SPI_SCK GPIO_NUM_5
|
||||
#define RST GPIO_NUM_18
|
||||
#define DIO0 GPIO_NUM_23 // LoRa IRQ
|
||||
#define DIO1 GPIO_NUM_23 // workaround
|
||||
#define DIO2 LMIC_UNUSED_PIN
|
||||
#define PIN_SPI_SS GPIO_NUM_17
|
||||
#define PIN_SPI_MOSI GPIO_NUM_27
|
||||
#define PIN_SPI_MISO GPIO_NUM_19
|
||||
#define PIN_SPI_SCK GPIO_NUM_5
|
||||
#define RST GPIO_NUM_18
|
||||
#define DIO0 GPIO_NUM_23 // LoRa IRQ
|
||||
#define DIO1 GPIO_NUM_23 // workaround
|
||||
#define DIO2 LMIC_UNUSED_PIN
|
||||
|
||||
// select WIFI antenna (internal = onboard / external = u.fl socket)
|
||||
#define HAS_ANTENNA_SWITCH 16 // pin for switching wifi antenna
|
||||
#define WIFI_ANTENNA 0 // 0 = internal, 1 = external
|
||||
#define HAS_ANTENNA_SWITCH 16 // pin for switching wifi antenna
|
||||
#define WIFI_ANTENNA 0 // 0 = internal, 1 = external
|
||||
+13
-15
@@ -1,14 +1,12 @@
|
||||
// Hardware related definitions for Pycom LoPy Board (not: LoPy4)
|
||||
|
||||
#define CFG_sx1276_radio 1
|
||||
#define HAS_LED \
|
||||
NOT_A_PIN // LoPy4 has no on board LED, so we use RGB LED on LoPy4
|
||||
#define HAS_RGB_LED GPIO_NUM_0 // WS2812B RGB LED on GPIO0
|
||||
#define HAS_LED NOT_A_PIN // LoPy4 has no on board LED, so we use RGB LED on LoPy4
|
||||
#define HAS_RGB_LED GPIO_NUM_0 // WS2812B RGB LED on GPIO0
|
||||
|
||||
// !!EXPERIMENTAL - not tested yet!!f
|
||||
// uncomment this only if your LoPy lives on a Pytrack expansion board with GPS
|
||||
// see
|
||||
// http://www.quectel.com/UploadImage/Downlad/Quectel_L76-L_I2C_Application_Note_V1.0.pdf
|
||||
// see http://www.quectel.com/UploadImage/Downlad/Quectel_L76-L_I2C_Application_Note_V1.0.pdf
|
||||
//#define HAS_GPS 1
|
||||
//#define GPS_I2C_PINS GPIO_NUM_9, GPIO_NUM_8 // SDA, SCL
|
||||
//#define GPS_I2C_ADDRESS_READ 0x21
|
||||
@@ -16,15 +14,15 @@
|
||||
//#define HAS_BUTTON GPIO_NUM_4
|
||||
|
||||
// Hardware pin definitions for Pycom LoPy4 board
|
||||
#define PIN_SPI_SS GPIO_NUM_18
|
||||
#define PIN_SPI_MOSI GPIO_NUM_27
|
||||
#define PIN_SPI_MISO GPIO_NUM_19
|
||||
#define PIN_SPI_SCK GPIO_NUM_5
|
||||
#define RST LMIC_UNUSED_PIN
|
||||
#define DIO0 GPIO_NUM_23 // LoRa IRQ
|
||||
#define DIO1 GPIO_NUM_23 // workaround
|
||||
#define DIO2 LMIC_UNUSED_PIN
|
||||
#define PIN_SPI_SS GPIO_NUM_18
|
||||
#define PIN_SPI_MOSI GPIO_NUM_27
|
||||
#define PIN_SPI_MISO GPIO_NUM_19
|
||||
#define PIN_SPI_SCK GPIO_NUM_5
|
||||
#define RST LMIC_UNUSED_PIN
|
||||
#define DIO0 GPIO_NUM_23 // LoRa IRQ
|
||||
#define DIO1 GPIO_NUM_23 // workaround
|
||||
#define DIO2 LMIC_UNUSED_PIN
|
||||
|
||||
// select WIFI antenna (internal = onboard / external = u.fl socket)
|
||||
#define HAS_ANTENNA_SWITCH 21 // pin for switching wifi antenna
|
||||
#define WIFI_ANTENNA 0 // 0 = internal, 1 = external
|
||||
#define HAS_ANTENNA_SWITCH 21 // pin for switching wifi antenna
|
||||
#define WIFI_ANTENNA 0 // 0 = internal, 1 = external
|
||||
+8
-17
@@ -3,26 +3,17 @@
|
||||
#define CFG_sx1276_radio 1 // HPD13A LoRa SoC
|
||||
|
||||
#define HAS_LED GPIO_NUM_21 // on board green LED_G1
|
||||
//#define HAS_BUTTON GPIO_NUM_39 // on board button "BOOT" (next to reset
|
||||
// button) !! seems not to work!!
|
||||
#define HAS_BATTERY_PROBE \
|
||||
ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
|
||||
//#define HAS_BUTTON GPIO_NUM_39 // on board button "BOOT" (next to reset button) !! seems not to work!!
|
||||
#define HAS_BATTERY_PROBE ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
|
||||
#define BATT_FACTOR 2 // voltage divider 100k/100k on board
|
||||
#define HAS_GPS 1 // use on board GPS
|
||||
#define GPS_SERIAL \
|
||||
9600, SERIAL_8N1, GPIO_NUM_12, \
|
||||
GPIO_NUM_15 // UBlox NEO 6M or 7M with default configuration
|
||||
#define HAS_GPS 1 // use on board GPS
|
||||
#define GPS_SERIAL 9600, SERIAL_8N1, GPIO_NUM_12, GPIO_NUM_15 // UBlox NEO 6M or 7M with default configuration
|
||||
|
||||
// re-define pin definitions of pins_arduino.h
|
||||
#define PIN_SPI_SS \
|
||||
GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- HPD13A NSS/SEL (Pin4) SPI Chip Select
|
||||
// Input
|
||||
#define PIN_SPI_MOSI \
|
||||
GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- HPD13A MOSI/DSI (Pin6) SPI Data Input
|
||||
#define PIN_SPI_MISO \
|
||||
GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- HPD13A MISO/DSO (Pin7) SPI Data Output
|
||||
#define PIN_SPI_SCK \
|
||||
GPIO_NUM_5 // ESP32 GPIO5 (Pin5) -- HPD13A SCK (Pin5) SPI Clock Input
|
||||
#define PIN_SPI_SS GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- HPD13A NSS/SEL (Pin4) SPI Chip Select Input
|
||||
#define PIN_SPI_MOSI GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- HPD13A MOSI/DSI (Pin6) SPI Data Input
|
||||
#define PIN_SPI_MISO GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- HPD13A MISO/DSO (Pin7) SPI Data Output
|
||||
#define PIN_SPI_SCK GPIO_NUM_5 // ESP32 GPIO5 (Pin5) -- HPD13A SCK (Pin5) SPI Clock Input
|
||||
|
||||
// non arduino pin definitions
|
||||
#define RST LMIC_UNUSED_PIN // connected to ESP32 RST/EN
|
||||
|
||||
+10
-23
@@ -4,34 +4,21 @@
|
||||
|
||||
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board
|
||||
//#define DISPLAY_FLIP 1 // uncomment this for rotated display
|
||||
#define HAS_LED GPIO_NUM_2 // white LED on board
|
||||
#define LED_ACTIVE_LOW 1 // Onboard LED is active when pin is LOW
|
||||
#define HAS_LED GPIO_NUM_2 // white LED on board
|
||||
#define LED_ACTIVE_LOW 1 // Onboard LED is active when pin is LOW
|
||||
#define HAS_BUTTON GPIO_NUM_0 // button "PRG" on board
|
||||
|
||||
// re-define pin definitions of pins_arduino.h
|
||||
#define PIN_SPI_SS \
|
||||
GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- SX1276 NSS (Pin19) SPI Chip Select
|
||||
// Input
|
||||
#define PIN_SPI_MOSI \
|
||||
GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- SX1276 MOSI (Pin18) SPI Data Input
|
||||
#define PIN_SPI_MISO \
|
||||
GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- SX1276 MISO (Pin17) SPI Data Output
|
||||
#define PIN_SPI_SCK \
|
||||
GPIO_NUM_5 // ESP32 GPIO5 (Pin5) -- SX1276 SCK (Pin16) SPI Clock Input
|
||||
#define PIN_SPI_SS GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- SX1276 NSS (Pin19) SPI Chip Select Input
|
||||
#define PIN_SPI_MOSI GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- SX1276 MOSI (Pin18) SPI Data Input
|
||||
#define PIN_SPI_MISO GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- SX1276 MISO (Pin17) SPI Data Output
|
||||
#define PIN_SPI_SCK GPIO_NUM_5 // ESP32 GPIO5 (Pin5) -- SX1276 SCK (Pin16) SPI Clock Input
|
||||
|
||||
// non arduino pin definitions
|
||||
#define RST \
|
||||
GPIO_NUM_14 // ESP32 GPIO14 (Pin14) -- SX1276 NRESET (Pin7) Reset Trigger
|
||||
// Input
|
||||
#define DIO0 \
|
||||
GPIO_NUM_26 // ESP32 GPIO26 (Pin15) -- SX1276 DIO0 (Pin8) used by LMIC for
|
||||
// detecting LoRa RX_Done & TX_Done
|
||||
#define DIO1 \
|
||||
GPIO_NUM_33 // ESP32 GPIO33 (Pin13) -- SX1276 DIO1 (Pin9) used by LMIC for
|
||||
// detecting LoRa RX_Timeout
|
||||
#define DIO2 \
|
||||
LMIC_UNUSED_PIN // 32 ESP32 GPIO32 (Pin12) -- SX1276 DIO2 (Pin10) not used by
|
||||
// LMIC for LoRa (Timeout for FSK only)
|
||||
#define RST GPIO_NUM_14 // ESP32 GPIO14 (Pin14) -- SX1276 NRESET (Pin7) Reset Trigger Input
|
||||
#define DIO0 GPIO_NUM_26 // ESP32 GPIO26 (Pin15) -- SX1276 DIO0 (Pin8) used by LMIC for detecting LoRa RX_Done & TX_Done
|
||||
#define DIO1 GPIO_NUM_33 // ESP32 GPIO33 (Pin13) -- SX1276 DIO1 (Pin9) used by LMIC for detecting LoRa RX_Timeout
|
||||
#define DIO2 LMIC_UNUSED_PIN // 32 ESP32 GPIO32 (Pin12) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)
|
||||
|
||||
// Hardware pin definitions for TTGOv1 Board with OLED SSD1306 I2C Display
|
||||
#define OLED_RST GPIO_NUM_16 // ESP32 GPIO16 (Pin16) -- SD1306 Reset
|
||||
|
||||
+15
-24
@@ -4,37 +4,28 @@
|
||||
|
||||
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
|
||||
//#define DISPLAY_FLIP 1 // uncomment this for rotated display
|
||||
#define HAS_LED \
|
||||
NOT_A_PIN // on-board LED is wired to SCL (used by display) therefore totally
|
||||
// useless
|
||||
#define HAS_LED NOT_A_PIN // on-board LED is wired to SCL (used by display) therefore totally useless
|
||||
|
||||
// disable brownout detection (needed on TTGOv2 for battery powered operation)
|
||||
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
|
||||
|
||||
// re-define pin definitions of pins_arduino.h
|
||||
#define PIN_SPI_SS \
|
||||
GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- HPD13A NSS/SEL (Pin4) SPI Chip Select
|
||||
// Input
|
||||
#define PIN_SPI_MOSI \
|
||||
GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- HPD13A MOSI/DSI (Pin6) SPI Data Input
|
||||
#define PIN_SPI_MISO \
|
||||
GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- HPD13A MISO/DSO (Pin7) SPI Data Output
|
||||
#define PIN_SPI_SCK \
|
||||
GPIO_NUM_5 // ESP32 GPIO5 (Pin5) -- HPD13A SCK (Pin5) SPI Clock Input
|
||||
#define PIN_SPI_SS GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- HPD13A NSS/SEL (Pin4) SPI Chip Select Input
|
||||
#define PIN_SPI_MOSI GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- HPD13A MOSI/DSI (Pin6) SPI Data Input
|
||||
#define PIN_SPI_MISO GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- HPD13A MISO/DSO (Pin7) SPI Data Output
|
||||
#define PIN_SPI_SCK GPIO_NUM_5 // ESP32 GPIO5 (Pin5) -- HPD13A SCK (Pin5) SPI Clock Input
|
||||
|
||||
// non arduino pin definitions
|
||||
#define RST LMIC_UNUSED_PIN // connected to ESP32 RST/EN
|
||||
#define DIO0 GPIO_NUM_26 // ESP32 GPIO26 wired on PCB to HPD13A
|
||||
#define DIO1 GPIO_NUM_33 // HPDIO1 on pcb, needs to be wired external to GPIO33
|
||||
#define DIO2 \
|
||||
LMIC_UNUSED_PIN // 32 HPDIO2 on pcb, needs to be wired external to GPIO32 (not
|
||||
// necessary for LoRa, only FSK)
|
||||
#define RST LMIC_UNUSED_PIN // connected to ESP32 RST/EN
|
||||
#define DIO0 GPIO_NUM_26 // ESP32 GPIO26 wired on PCB to HPD13A
|
||||
#define DIO1 GPIO_NUM_33 // HPDIO1 on pcb, needs to be wired external to GPIO33
|
||||
#define DIO2 LMIC_UNUSED_PIN // 32 HPDIO2 on pcb, needs to be wired external to GPIO32 (not necessary for LoRa, only FSK)
|
||||
|
||||
// Hardware pin definitions for TTGO V2 Board with OLED SSD1306 0,96" I2C
|
||||
// Display
|
||||
// Hardware pin definitions for TTGO V2 Board with OLED SSD1306 0,96" I2C Display
|
||||
#define OLED_RST U8X8_PIN_NONE // connected to CPU RST/EN
|
||||
#define OLED_SDA GPIO_NUM_21 // ESP32 GPIO4 (Pin4) -- SD1306 D1+D2
|
||||
#define OLED_SCL GPIO_NUM_22 // ESP32 GPIO15 (Pin15) -- SD1306 D0
|
||||
#define OLED_SDA GPIO_NUM_21 // ESP32 GPIO4 (Pin4) -- SD1306 D1+D2
|
||||
#define OLED_SCL GPIO_NUM_22 // ESP32 GPIO15 (Pin15) -- SD1306 D0
|
||||
|
||||
|
||||
/*
|
||||
ESP32 LoRa module (SPI) OLED display (I2C)
|
||||
@@ -57,6 +48,6 @@
|
||||
{2} Must be manually wired!
|
||||
DIO2 is wired to a separate pin but is not wired on-board to pin/GPIO32.
|
||||
Explicitly wire board pin labeled DIO2 to pin 32 (see TTGO V2.0 pinout).
|
||||
{3} The on-board LED is wired to SCL (used by display) therefore totally
|
||||
useless!
|
||||
{3} The on-board LED is wired to SCL (used by display) therefore totally useless!
|
||||
*/
|
||||
|
||||
+14
-22
@@ -3,32 +3,24 @@
|
||||
#define CFG_sx1276_radio 1 // HPD13A LoRa SoC
|
||||
|
||||
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
|
||||
#define DISPLAY_FLIP 1 // rotated display
|
||||
#define HAS_LED \
|
||||
GPIO_NUM_23 // green on board LED_G3 (not in initial board version)
|
||||
#define HAS_BATTERY_PROBE \
|
||||
ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
|
||||
#define DISPLAY_FLIP 1 // rotated display
|
||||
#define HAS_LED GPIO_NUM_23 // green on board LED_G3 (not in initial board version)
|
||||
#define HAS_BATTERY_PROBE ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
|
||||
#define BATT_FACTOR 2 // voltage divider 100k/100k on board
|
||||
|
||||
// re-define pin definitions of pins_arduino.h
|
||||
#define PIN_SPI_SS \
|
||||
GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- HPD13A NSS/SEL (Pin4) SPI Chip Select
|
||||
// Input
|
||||
#define PIN_SPI_MOSI \
|
||||
GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- HPD13A MOSI/DSI (Pin6) SPI Data Input
|
||||
#define PIN_SPI_MISO \
|
||||
GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- HPD13A MISO/DSO (Pin7) SPI Data Output
|
||||
#define PIN_SPI_SCK \
|
||||
GPIO_NUM_5 // ESP32 GPIO5 (Pin5) -- HPD13A SCK (Pin5) SPI Clock Input
|
||||
#define PIN_SPI_SS GPIO_NUM_18 // ESP32 GPIO18 (Pin18) -- HPD13A NSS/SEL (Pin4) SPI Chip Select Input
|
||||
#define PIN_SPI_MOSI GPIO_NUM_27 // ESP32 GPIO27 (Pin27) -- HPD13A MOSI/DSI (Pin6) SPI Data Input
|
||||
#define PIN_SPI_MISO GPIO_NUM_19 // ESP32 GPIO19 (Pin19) -- HPD13A MISO/DSO (Pin7) SPI Data Output
|
||||
#define PIN_SPI_SCK GPIO_NUM_5 // ESP32 GPIO5 (Pin5) -- HPD13A SCK (Pin5) SPI Clock Input
|
||||
|
||||
// non arduino pin definitions
|
||||
#define RST LMIC_UNUSED_PIN // connected to ESP32 RST/EN
|
||||
#define DIO0 GPIO_NUM_26 // ESP32 GPIO26 <-> HPD13A IO0
|
||||
#define DIO1 GPIO_NUM_33 // ESP32 GPIO33 <-> HPDIO1 <-> HPD13A IO1
|
||||
#define DIO2 GPIO_NUM_32 // ESP32 GPIO32 <-> HPDIO2 <-> HPD13A IO2
|
||||
#define RST LMIC_UNUSED_PIN // connected to ESP32 RST/EN
|
||||
#define DIO0 GPIO_NUM_26 // ESP32 GPIO26 <-> HPD13A IO0
|
||||
#define DIO1 GPIO_NUM_33 // ESP32 GPIO33 <-> HPDIO1 <-> HPD13A IO1
|
||||
#define DIO2 GPIO_NUM_32 // ESP32 GPIO32 <-> HPDIO2 <-> HPD13A IO2
|
||||
|
||||
// Hardware pin definitions for TTGO V2 Board with OLED SSD1306 0,96" I2C
|
||||
// Display
|
||||
// Hardware pin definitions for TTGO V2 Board with OLED SSD1306 0,96" I2C Display
|
||||
#define OLED_RST U8X8_PIN_NONE // connected to CPU RST/EN
|
||||
#define OLED_SDA GPIO_NUM_21 // ESP32 GPIO4 (Pin4) -- SD1306 D1+D2
|
||||
#define OLED_SCL GPIO_NUM_22 // ESP32 GPIO15 (Pin15) -- SD1306 D0
|
||||
#define OLED_SDA GPIO_NUM_21 // ESP32 GPIO4 (Pin4) -- SD1306 D1+D2
|
||||
#define OLED_SCL GPIO_NUM_22 // ESP32 GPIO15 (Pin15) -- SD1306 D0
|
||||
Reference in new issue
Block a user