DigitalInfinity/ESP32-PaxCounter
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

lmic_config.h use interrupts

Browse Source
This commit is contained in:
Verkehrsrot 2019-10-10 11:06:24 +02:00
parent a52b4aa858
commit 36c178054a
1 changed files with 3 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
src/lmic_config.h
View File

@ -18,7 +18,7 @@
// use interrupts only if LORA_IRQ and LORA_DIO are connected to interrupt // use interrupts only if LORA_IRQ and LORA_DIO are connected to interrupt
// capable GPIO pins on your board, if not disable interrupts // capable GPIO pins on your board, if not disable interrupts
//#define LMIC_USE_INTERRUPTS 1 #define LMIC_USE_INTERRUPTS 1
// time sync via LoRaWAN network, note: not supported by TTNv2 // time sync via LoRaWAN network, note: not supported by TTNv2
// #define LMIC_ENABLE_DeviceTimeReq 1 // #define LMIC_ENABLE_DeviceTimeReq 1
@ -28,14 +28,14 @@
// so consuming more power. You may sharpen (reduce) this value if you are // so consuming more power. You may sharpen (reduce) this value if you are
// limited on battery. // limited on battery.
// ATTN: VALUES > 7 WILL CAUSE RECEPTION AND JOIN PROBLEMS WITH HIGH SF RATES // ATTN: VALUES > 7 WILL CAUSE RECEPTION AND JOIN PROBLEMS WITH HIGH SF RATES
#define CLOCK_ERROR_PROCENTAGE 7 //#define CLOCK_ERROR_PROCENTAGE 5
// Set this to 1 to enable some basic debug output (using printf) about // Set this to 1 to enable some basic debug output (using printf) about
// RF settings used during transmission and reception. Set to 2 to // RF settings used during transmission and reception. Set to 2 to
// enable more verbose output. Make sure that printf is actually // enable more verbose output. Make sure that printf is actually
// configured (e.g. on AVR it is not by default), otherwise using it can // configured (e.g. on AVR it is not by default), otherwise using it can
// cause crashing. // cause crashing.
#define LMIC_DEBUG_LEVEL 0 //#define LMIC_DEBUG_LEVEL 1
// Enable this to allow using printf() to print to the given serial port // Enable this to allow using printf() to print to the given serial port
// (or any other Print object). This can be easy for debugging. The // (or any other Print object). This can be easy for debugging. The