DigitalInfinity/ESP32-PaxCounter
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge pull request #442 from cyberman54/development

Browse Source 
v1.8.2
This commit is contained in:
Verkehrsrot 2019-09-18 18:58:21 +02:00 committed by GitHub
commit 30ccec3fa4
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
3 changed files with 5 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
platformio.ini
View File

@ -43,7 +43,7 @@ description = Paxcounter is a device for metering passenger flows in realtime. I
[common] [common]
; for release_version use max. 10 chars total, use any decimal format like "a.b.c" ; for release_version use max. 10 chars total, use any decimal format like "a.b.c"
release_version = 1.8.11 release_version = 1.8.2
; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running! ; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose ; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
debug_level = 3 debug_level = 3
@ -51,7 +51,7 @@ extra_scripts = pre:build.py
otakeyfile = ota.conf otakeyfile = ota.conf
lorakeyfile = loraconf.h lorakeyfile = loraconf.h
lmicconfigfile = lmic_config.h lmicconfigfile = lmic_config.h
platform_espressif32 = espressif32@1.9.0 platform_espressif32 = espressif32@1.10.0
monitor_speed = 115200 monitor_speed = 115200
upload_speed = 115200 upload_speed = 115200
lib_deps_lora = lib_deps_lora =

7
src/hal/ttgobeam.h
View File

@ -17,7 +17,6 @@
#define HAS_LORA 1 // comment out if device shall not send data via LoRa #define HAS_LORA 1 // comment out if device shall not send data via LoRa
#define CFG_sx1276_radio 1 // HPD13A LoRa SoC #define CFG_sx1276_radio 1 // HPD13A LoRa SoC
#define BOARD_HAS_PSRAM // use extra 4MB external RAM
#define HAS_BUTTON GPIO_NUM_39 // on board button (next to reset) #define HAS_BUTTON GPIO_NUM_39 // on board button (next to reset)
#define BAT_MEASURE_ADC ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7 #define BAT_MEASURE_ADC ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
#define BAT_VOLTAGE_DIVIDER 2 // voltage divider 100k/100k on board #define BAT_VOLTAGE_DIVIDER 2 // voltage divider 100k/100k on board
@ -29,9 +28,9 @@
// enable only if device has these sensors, otherwise comment these lines // enable only if device has these sensors, otherwise comment these lines
// BME680 sensor on I2C bus // BME680 sensor on I2C bus
//#define HAS_BME 1 // Enable BME sensors in general #define HAS_BME 1 // Enable BME sensors in general
//#define HAS_BME680 SDA, SCL #define HAS_BME680 SDA, SCL
//#define BME680_ADDR BME680_I2C_ADDR_PRIMARY // !! connect SDIO of BME680 to GND !! #define BME680_ADDR BME680_I2C_ADDR_PRIMARY // !! connect SDIO of BME680 to GND !!
// display (if connected) // display (if connected)
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C #define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C

1
src/hal/ttgobeam10.h
View File

@ -13,7 +13,6 @@
#define HAS_LORA 1 // comment out if device shall not send data via LoRa #define HAS_LORA 1 // comment out if device shall not send data via LoRa
#define CFG_sx1276_radio 1 // HPD13A LoRa SoC #define CFG_sx1276_radio 1 // HPD13A LoRa SoC
#define BOARD_HAS_PSRAM // use extra 4MB external RAM
#define HAS_BUTTON GPIO_NUM_38 // middle on board button #define HAS_BUTTON GPIO_NUM_38 // middle on board button
#define HAS_PMU 1 // AXP192 power management chip #define HAS_PMU 1 // AXP192 power management chip
#define PMU_INT GPIO_NUM_35 // AXP192 interrupt #define PMU_INT GPIO_NUM_35 // AXP192 interrupt