DigitalInfinity/ESP32-PaxCounter
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

BSEC integration (experimental)

Browse Source
This commit is contained in:
Klaus K Wilting 2018-11-25 11:48:03 +01:00
parent 8f201e066f
commit 222dfb5a95
9 changed files with 914 additions and 114 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
include/bme680mems.h
View File

@ -3,21 +3,30 @@
#include "globals.h"
#include <Wire.h>
#include "bme680.h"
#include "bsec_interface.h"
#include "bsec_datatypes.h"
//#include "bme680_defs.h"
//#include "bme680.c"
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include "bsec_integration.h"
#include "bsec_integration.c"
extern bmeStatus_t
bme_status; // Make struct for storing gps data globally available
void bme_init();
int bme_init();
bool bme_read();
void user_delay_ms(uint32_t period);
int64_t get_timestamp_us();
int8_t user_i2c_read(uint8_t dev_id, uint8_t reg_addr, uint8_t *reg_data,
uint16_t len);
int8_t user_i2c_write(uint8_t dev_id, uint8_t reg_addr, uint8_t *reg_data,
uint16_t len);
uint32_t state_load(uint8_t *state_buffer, uint32_t n_buffer);
void state_save(const uint8_t *state_buffer, uint32_t length);
uint32_t config_load(uint8_t *config_buffer, uint32_t n_buffer);
#endif

12
include/wifiscan.h
View File

@ -10,20 +10,22 @@
#define MAC_SNIFF_WIFI 0
#define MAC_SNIFF_BLE 1
/*
typedef struct {
unsigned frame_ctrl : 16;
unsigned duration_id : 16;
uint8_t addr1[6]; /* receiver address */
uint8_t addr2[6]; /* sender address */
uint8_t addr3[6]; /* filtering address */
uint8_t addr1[6]; // receiver address
uint8_t addr2[6]; // sender address
uint8_t addr3[6]; // filtering address
unsigned sequence_ctrl : 16;
uint8_t addr4[6]; /* optional */
uint8_t addr4[6]; // optional
} wifi_ieee80211_mac_hdr_t;
typedef struct {
wifi_ieee80211_mac_hdr_t hdr;
uint8_t payload[0]; /* network data ended with 4 bytes csum (CRC32) */
uint8_t payload[0]; // network data ended with 4 bytes csum (CRC32)
} wifi_ieee80211_packet_t;
*/
void wifi_sniffer_init(void);
void IRAM_ATTR wifi_sniffer_packet_handler(void *buff, wifi_promiscuous_pkt_type_t type);

559
lib/Bosch-BSEC/bsec_integration.c Normal file
View File

@ -0,0 +1,559 @@
/*
* Copyright (C) 2017 Robert Bosch. All Rights Reserved.
*
* Disclaimer
*
* Common:
* Bosch Sensortec products are developed for the consumer goods industry. They may only be used
* within the parameters of the respective valid product data sheet. Bosch Sensortec products are
* provided with the express understanding that there is no warranty of fitness for a particular purpose.
* They are not fit for use in life-sustaining, safety or security sensitive systems or any system or device
* that may lead to bodily harm or property damage if the system or device malfunctions. In addition,
* Bosch Sensortec products are not fit for use in products which interact with motor vehicle systems.
* The resale and/or use of products are at the purchasers own risk and his own responsibility. The
* examination of fitness for the intended use is the sole responsibility of the Purchaser.
*
* The purchaser shall indemnify Bosch Sensortec from all third party claims, including any claims for
* incidental, or consequential damages, arising from any product use not covered by the parameters of
* the respective valid product data sheet or not approved by Bosch Sensortec and reimburse Bosch
* Sensortec for all costs in connection with such claims.
*
* The purchaser must monitor the market for the purchased products, particularly with regard to
* product safety and inform Bosch Sensortec without delay of all security relevant incidents.
*
* Engineering Samples are marked with an asterisk (*) or (e). Samples may vary from the valid
* technical specifications of the product series. They are therefore not intended or fit for resale to third
* parties or for use in end products. Their sole purpose is internal client testing. The testing of an
* engineering sample may in no way replace the testing of a product series. Bosch Sensortec
* assumes no liability for the use of engineering samples. By accepting the engineering samples, the
* Purchaser agrees to indemnify Bosch Sensortec from all claims arising from the use of engineering
* samples.
*
* Special:
* This software module (hereinafter called "Software") and any information on application-sheets
* (hereinafter called "Information") is provided free of charge for the sole purpose to support your
* application work. The Software and Information is subject to the following terms and conditions:
*
* The Software is specifically designed for the exclusive use for Bosch Sensortec products by
* personnel who have special experience and training. Do not use this Software if you do not have the
* proper experience or training.
*
* This Software package is provided `` as is `` and without any expressed or implied warranties,
* including without limitation, the implied warranties of merchantability and fitness for a particular
* purpose.
*
* Bosch Sensortec and their representatives and agents deny any liability for the functional impairment
* of this Software in terms of fitness, performance and safety. Bosch Sensortec and their
* representatives and agents shall not be liable for any direct or indirect damages or injury, except as
* otherwise stipulated in mandatory applicable law.
*
* The Information provided is believed to be accurate and reliable. Bosch Sensortec assumes no
* responsibility for the consequences of use of such Information nor for any infringement of patents or
* other rights of third parties which may result from its use. No license is granted by implication or
* otherwise under any patent or patent rights of Bosch. Specifications mentioned in the Information are
* subject to change without notice.
*
* It is not allowed to deliver the source code of the Software to any third party without permission of
* Bosch Sensortec.
*
*/
/*!
* @file bsec_integration.c
*
* @brief
* Private part of the example for using of BSEC library.
*/
/*!
* @addtogroup bsec_examples BSEC Examples
* @brief BSEC usage examples
* @{*/
/**********************************************************************************************************************/
/* header files */
/**********************************************************************************************************************/
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include "bsec_integration.h"
/**********************************************************************************************************************/
/* local macro definitions */
/**********************************************************************************************************************/
#define NUM_USED_OUTPUTS 8
/**********************************************************************************************************************/
/* global variable declarations */
/**********************************************************************************************************************/
/* Global sensor APIs data structure */
static struct bme680_dev bme680_g;
/* Global temperature offset to be subtracted */
static float bme680_temperature_offset_g = 0.0f;
/**********************************************************************************************************************/
/* functions */
/**********************************************************************************************************************/
/*!
* @brief Virtual sensor subscription
* Please call this function before processing of data using bsec_do_steps function
*
* @param[in] sample_rate mode to be used (either BSEC_SAMPLE_RATE_ULP or BSEC_SAMPLE_RATE_LP)
*
* @return subscription result, zero when successful
*/
static bsec_library_return_t bme680_bsec_update_subscription(float sample_rate)
{
bsec_sensor_configuration_t requested_virtual_sensors[NUM_USED_OUTPUTS];
uint8_t n_requested_virtual_sensors = NUM_USED_OUTPUTS;
bsec_sensor_configuration_t required_sensor_settings[BSEC_MAX_PHYSICAL_SENSOR];
uint8_t n_required_sensor_settings = BSEC_MAX_PHYSICAL_SENSOR;
bsec_library_return_t status = BSEC_OK;
/* note: Virtual sensors as desired to be added here */
requested_virtual_sensors[0].sensor_id = BSEC_OUTPUT_IAQ;
requested_virtual_sensors[0].sample_rate = sample_rate;
requested_virtual_sensors[1].sensor_id = BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_TEMPERATURE;
requested_virtual_sensors[1].sample_rate = sample_rate;
requested_virtual_sensors[2].sensor_id = BSEC_OUTPUT_RAW_PRESSURE;
requested_virtual_sensors[2].sample_rate = sample_rate;
requested_virtual_sensors[3].sensor_id = BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_HUMIDITY;
requested_virtual_sensors[3].sample_rate = sample_rate;
requested_virtual_sensors[4].sensor_id = BSEC_OUTPUT_RAW_GAS;
requested_virtual_sensors[4].sample_rate = sample_rate;
requested_virtual_sensors[5].sensor_id = BSEC_OUTPUT_RAW_TEMPERATURE;
requested_virtual_sensors[5].sample_rate = sample_rate;
requested_virtual_sensors[6].sensor_id = BSEC_OUTPUT_RAW_HUMIDITY;
requested_virtual_sensors[6].sample_rate = sample_rate;
requested_virtual_sensors[7].sensor_id = BSEC_OUTPUT_STATIC_IAQ;
requested_virtual_sensors[7].sample_rate = sample_rate;
/* Call bsec_update_subscription() to enable/disable the requested virtual sensors */
status = bsec_update_subscription(requested_virtual_sensors, n_requested_virtual_sensors, required_sensor_settings,
&n_required_sensor_settings);
return status;
}
/*!
* @brief Initialize the BME680 sensor and the BSEC library
*
* @param[in] sample_rate mode to be used (either BSEC_SAMPLE_RATE_ULP or BSEC_SAMPLE_RATE_LP)
* @param[in] temperature_offset device-specific temperature offset (due to self-heating)
* @param[in] bus_write pointer to the bus writing function
* @param[in] bus_read pointer to the bus reading function
* @param[in] sleep pointer to the system specific sleep function
* @param[in] state_load pointer to the system-specific state load function
* @param[in] config_load pointer to the system-specific config load function
*
* @return zero if successful, negative otherwise
*/
return_values_init bsec_iot_init(float sample_rate, float temperature_offset, bme680_com_fptr_t bus_write,
bme680_com_fptr_t bus_read, sleep_fct sleep, state_load_fct state_load, config_load_fct config_load)
{
return_values_init ret = {BME680_OK, BSEC_OK};
bsec_library_return_t bsec_status = BSEC_OK;
uint8_t bsec_state[BSEC_MAX_PROPERTY_BLOB_SIZE] = {0};
uint8_t bsec_config[BSEC_MAX_PROPERTY_BLOB_SIZE] = {0};
uint8_t work_buffer[BSEC_MAX_PROPERTY_BLOB_SIZE] = {0};
int bsec_state_len, bsec_config_len;
/* Fixed I2C configuration */
bme680_g.dev_id = BME680_I2C_ADDR_PRIMARY;
bme680_g.intf = BME680_I2C_INTF;
/* User configurable I2C configuration */
bme680_g.write = bus_write;
bme680_g.read = bus_read;
bme680_g.delay_ms = sleep;
/* Initialize BME680 API */
ret.bme680_status = bme680_init(&bme680_g);
if (ret.bme680_status != BME680_OK)
{
return ret;
}
/* Initialize BSEC library */
ret.bsec_status = bsec_init();
if (ret.bsec_status != BSEC_OK)
{
return ret;
}
/* Load library config, if available */
bsec_config_len = config_load(bsec_config, sizeof(bsec_config));
if (bsec_config_len != 0)
{
ret.bsec_status = bsec_set_configuration(bsec_config, bsec_config_len, work_buffer, sizeof(work_buffer));
if (ret.bsec_status != BSEC_OK)
{
return ret;
}
}
/* Load previous library state, if available */
bsec_state_len = state_load(bsec_state, sizeof(bsec_state));
if (bsec_state_len != 0)
{
ret.bsec_status = bsec_set_state(bsec_state, bsec_state_len, work_buffer, sizeof(work_buffer));
if (ret.bsec_status != BSEC_OK)
{
return ret;
}
}
/* Set temperature offset */
bme680_temperature_offset_g = temperature_offset;
/* Call to the function which sets the library with subscription information */
ret.bsec_status = bme680_bsec_update_subscription(sample_rate);
if (ret.bsec_status != BSEC_OK)
{
return ret;
}
return ret;
}
/*!
* @brief Trigger the measurement based on sensor settings
*
* @param[in] sensor_settings settings of the BME680 sensor adopted by sensor control function
* @param[in] sleep pointer to the system specific sleep function
*
* @return none
*/
static void bme680_bsec_trigger_measurement(bsec_bme_settings_t *sensor_settings, sleep_fct sleep)
{
uint16_t meas_period;
uint8_t set_required_settings;
int8_t bme680_status = BME680_OK;
/* Check if a forced-mode measurement should be triggered now */
if (sensor_settings->trigger_measurement)
{
/* Set sensor configuration */
bme680_g.tph_sett.os_hum = sensor_settings->humidity_oversampling;
bme680_g.tph_sett.os_pres = sensor_settings->pressure_oversampling;
bme680_g.tph_sett.os_temp = sensor_settings->temperature_oversampling;
bme680_g.gas_sett.run_gas = sensor_settings->run_gas;
bme680_g.gas_sett.heatr_temp = sensor_settings->heater_temperature; /* degree Celsius */
bme680_g.gas_sett.heatr_dur = sensor_settings->heating_duration; /* milliseconds */
/* Select the power mode */
/* Must be set before writing the sensor configuration */
bme680_g.power_mode = BME680_FORCED_MODE;
/* Set the required sensor settings needed */
set_required_settings = BME680_OST_SEL | BME680_OSP_SEL | BME680_OSH_SEL | BME680_GAS_SENSOR_SEL;
/* Set the desired sensor configuration */
bme680_status = bme680_set_sensor_settings(set_required_settings, &bme680_g);
/* Set power mode as forced mode and trigger forced mode measurement */
bme680_status = bme680_set_sensor_mode(&bme680_g);
/* Get the total measurement duration so as to sleep or wait till the measurement is complete */
bme680_get_profile_dur(&meas_period, &bme680_g);
/* Delay till the measurement is ready. Timestamp resolution in ms */
sleep((uint32_t)meas_period);
}
/* Call the API to get current operation mode of the sensor */
bme680_status = bme680_get_sensor_mode(&bme680_g);
/* When the measurement is completed and data is ready for reading, the sensor must be in BME680_SLEEP_MODE.
* Read operation mode to check whether measurement is completely done and wait until the sensor is no more
* in BME680_FORCED_MODE. */
while (bme680_g.power_mode == BME680_FORCED_MODE)
{
/* sleep for 5 ms */
sleep(5);
bme680_status = bme680_get_sensor_mode(&bme680_g);
}
}
/*!
* @brief Read the data from registers and populate the inputs structure to be passed to do_steps function
*
* @param[in] time_stamp_trigger settings of the sensor returned from sensor control function
* @param[in] inputs input structure containing the information on sensors to be passed to do_steps
* @param[in] num_bsec_inputs number of inputs to be passed to do_steps
* @param[in] bsec_process_data process data variable returned from sensor_control
*
* @return none
*/
static void bme680_bsec_read_data(int64_t time_stamp_trigger, bsec_input_t *inputs, uint8_t *num_bsec_inputs,
int32_t bsec_process_data)
{
static struct bme680_field_data data;
int8_t bme680_status = BME680_OK;
/* We only have to read data if the previous call the bsec_sensor_control() actually asked for it */
if (bsec_process_data)
{
bme680_status = bme680_get_sensor_data(&data, &bme680_g);
if (data.status & BME680_NEW_DATA_MSK)
{
/* Pressure to be processed by BSEC */
if (bsec_process_data & BSEC_PROCESS_PRESSURE)
{
/* Place presssure sample into input struct */
inputs[*num_bsec_inputs].sensor_id = BSEC_INPUT_PRESSURE;
inputs[*num_bsec_inputs].signal = data.pressure;
inputs[*num_bsec_inputs].time_stamp = time_stamp_trigger;
(*num_bsec_inputs)++;
}
/* Temperature to be processed by BSEC */
if (bsec_process_data & BSEC_PROCESS_TEMPERATURE)
{
/* Place temperature sample into input struct */
inputs[*num_bsec_inputs].sensor_id = BSEC_INPUT_TEMPERATURE;
#ifdef BME680_FLOAT_POINT_COMPENSATION
inputs[*num_bsec_inputs].signal = data.temperature;
#else
inputs[*num_bsec_inputs].signal = data.temperature / 100.0f;
#endif
inputs[*num_bsec_inputs].time_stamp = time_stamp_trigger;
(*num_bsec_inputs)++;
/* Also add optional heatsource input which will be subtracted from the temperature reading to
* compensate for device-specific self-heating (supported in BSEC IAQ solution)*/
inputs[*num_bsec_inputs].sensor_id = BSEC_INPUT_HEATSOURCE;
inputs[*num_bsec_inputs].signal = bme680_temperature_offset_g;
inputs[*num_bsec_inputs].time_stamp = time_stamp_trigger;
(*num_bsec_inputs)++;
}
/* Humidity to be processed by BSEC */
if (bsec_process_data & BSEC_PROCESS_HUMIDITY)
{
/* Place humidity sample into input struct */
inputs[*num_bsec_inputs].sensor_id = BSEC_INPUT_HUMIDITY;
#ifdef BME680_FLOAT_POINT_COMPENSATION
inputs[*num_bsec_inputs].signal = data.humidity;
#else
inputs[*num_bsec_inputs].signal = data.humidity / 1000.0f;
#endif
inputs[*num_bsec_inputs].time_stamp = time_stamp_trigger;
(*num_bsec_inputs)++;
}
/* Gas to be processed by BSEC */
if (bsec_process_data & BSEC_PROCESS_GAS)
{
/* Check whether gas_valid flag is set */
if(data.status & BME680_GASM_VALID_MSK)
{
/* Place sample into input struct */
inputs[*num_bsec_inputs].sensor_id = BSEC_INPUT_GASRESISTOR;
inputs[*num_bsec_inputs].signal = data.gas_resistance;
inputs[*num_bsec_inputs].time_stamp = time_stamp_trigger;
(*num_bsec_inputs)++;
}
}
}
}
}
/*!
* @brief This function is written to process the sensor data for the requested virtual sensors
*
* @param[in] bsec_inputs input structure containing the information on sensors to be passed to do_steps
* @param[in] num_bsec_inputs number of inputs to be passed to do_steps
* @param[in] output_ready pointer to the function processing obtained BSEC outputs
*
* @return none
*/
static void bme680_bsec_process_data(bsec_input_t *bsec_inputs, uint8_t num_bsec_inputs, output_ready_fct output_ready)
{
/* Output buffer set to the maximum virtual sensor outputs supported */
bsec_output_t bsec_outputs[BSEC_NUMBER_OUTPUTS];
uint8_t num_bsec_outputs = 0;
uint8_t index = 0;
bsec_library_return_t bsec_status = BSEC_OK;
int64_t timestamp = 0;
float iaq = 0.0f;
uint8_t iaq_accuracy = 0;
float temp = 0.0f;
float raw_temp = 0.0f;
float raw_pressure = 0.0f;
float humidity = 0.0f;
float raw_humidity = 0.0f;
float raw_gas = 0.0f;
float static_iaq = 0.0f;
uint8_t static_iaq_accuracy = 0;
float co2_equivalent = 0.0f;
uint8_t co2_accuracy = 0;
float breath_voc_equivalent = 0.0f;
uint8_t breath_voc_accuracy = 0;
float comp_gas_value = 0.0f;
uint8_t comp_gas_accuracy = 0;
float gas_percentage = 0.0f;
uint8_t gas_percentage_acccuracy = 0;
/* Check if something should be processed by BSEC */
if (num_bsec_inputs > 0)
{
/* Set number of outputs to the size of the allocated buffer */
/* BSEC_NUMBER_OUTPUTS to be defined */
num_bsec_outputs = BSEC_NUMBER_OUTPUTS;
/* Perform processing of the data by BSEC
Note:
* The number of outputs you get depends on what you asked for during bsec_update_subscription(). This is
handled under bme680_bsec_update_subscription() function in this example file.
* The number of actual outputs that are returned is written to num_bsec_outputs. */
bsec_status = bsec_do_steps(bsec_inputs, num_bsec_inputs, bsec_outputs, &num_bsec_outputs);
/* Iterate through the outputs and extract the relevant ones. */
for (index = 0; index < num_bsec_outputs; index++)
{
switch (bsec_outputs[index].sensor_id)
{
case BSEC_OUTPUT_IAQ:
iaq = bsec_outputs[index].signal;
iaq_accuracy = bsec_outputs[index].accuracy;
break;
case BSEC_OUTPUT_STATIC_IAQ:
static_iaq = bsec_outputs[index].signal;
static_iaq_accuracy = bsec_outputs[index].accuracy;
break;
case BSEC_OUTPUT_CO2_EQUIVALENT:
co2_equivalent = bsec_outputs[index].signal;
co2_accuracy = bsec_outputs[index].accuracy;
break;
case BSEC_OUTPUT_BREATH_VOC_EQUIVALENT:
breath_voc_equivalent = bsec_outputs[index].signal;
breath_voc_accuracy = bsec_outputs[index].accuracy;
break;
case BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_TEMPERATURE:
temp = bsec_outputs[index].signal;
break;
case BSEC_OUTPUT_RAW_PRESSURE:
raw_pressure = bsec_outputs[index].signal;
break;
case BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_HUMIDITY:
humidity = bsec_outputs[index].signal;
break;
case BSEC_OUTPUT_RAW_GAS:
raw_gas = bsec_outputs[index].signal;
break;
case BSEC_OUTPUT_RAW_TEMPERATURE:
raw_temp = bsec_outputs[index].signal;
break;
case BSEC_OUTPUT_RAW_HUMIDITY:
raw_humidity = bsec_outputs[index].signal;
break;
case BSEC_OUTPUT_COMPENSATED_GAS:
comp_gas_value = bsec_outputs[index].signal;
comp_gas_accuracy = bsec_outputs[index].accuracy;
break;
case BSEC_OUTPUT_GAS_PERCENTAGE:
gas_percentage = bsec_outputs[index].signal;
gas_percentage_acccuracy = bsec_outputs[index].accuracy;
break;
default:
continue;
}
/* Assume that all the returned timestamps are the same */
timestamp = bsec_outputs[index].time_stamp;
}
/* Pass the extracted outputs to the user provided output_ready() function. */
output_ready(timestamp, iaq, iaq_accuracy, temp, humidity, raw_pressure, raw_temp,
raw_humidity, raw_gas, bsec_status, static_iaq, co2_equivalent, breath_voc_equivalent);
}
}
/*!
* @brief Runs the main (endless) loop that queries sensor settings, applies them, and processes the measured data
*
* @param[in] sleep pointer to the system specific sleep function
* @param[in] get_timestamp_us pointer to the system specific timestamp derivation function
* @param[in] output_ready pointer to the function processing obtained BSEC outputs
* @param[in] state_save pointer to the system-specific state save function
* @param[in] save_intvl interval at which BSEC state should be saved (in samples)
*
* @return none
*/
void bsec_iot_loop(sleep_fct sleep, get_timestamp_us_fct get_timestamp_us, output_ready_fct output_ready,
state_save_fct state_save, uint32_t save_intvl)
{
/* Timestamp variables */
int64_t time_stamp = 0;
int64_t time_stamp_interval_ms = 0;
/* Allocate enough memory for up to BSEC_MAX_PHYSICAL_SENSOR physical inputs*/
bsec_input_t bsec_inputs[BSEC_MAX_PHYSICAL_SENSOR];
/* Number of inputs to BSEC */
uint8_t num_bsec_inputs = 0;
/* BSEC sensor settings struct */
bsec_bme_settings_t sensor_settings;
/* Save state variables */
uint8_t bsec_state[BSEC_MAX_STATE_BLOB_SIZE];
uint8_t work_buffer[BSEC_MAX_STATE_BLOB_SIZE];
uint32_t bsec_state_len = 0;
uint32_t n_samples = 0;
bsec_library_return_t bsec_status = BSEC_OK;
while (1)
{
/* get the timestamp in nanoseconds before calling bsec_sensor_control() */
time_stamp = get_timestamp_us() * 1000;
/* Retrieve sensor settings to be used in this time instant by calling bsec_sensor_control */
bsec_sensor_control(time_stamp, &sensor_settings);
/* Trigger a measurement if necessary */
bme680_bsec_trigger_measurement(&sensor_settings, sleep);
/* Read data from last measurement */
num_bsec_inputs = 0;
bme680_bsec_read_data(time_stamp, bsec_inputs, &num_bsec_inputs, sensor_settings.process_data);
/* Time to invoke BSEC to perform the actual processing */
bme680_bsec_process_data(bsec_inputs, num_bsec_inputs, output_ready);
/* Increment sample counter */
n_samples++;
/* Retrieve and store state if the passed save_intvl */
if (n_samples >= save_intvl)
{
bsec_status = bsec_get_state(0, bsec_state, sizeof(bsec_state), work_buffer, sizeof(work_buffer), &bsec_state_len);
if (bsec_status == BSEC_OK)
{
state_save(bsec_state, bsec_state_len);
}
n_samples = 0;
}
/* Compute how long we can sleep until we need to call bsec_sensor_control() next */
/* Time_stamp is converted from microseconds to nanoseconds first and then the difference to milliseconds */
time_stamp_interval_ms = (sensor_settings.next_call - get_timestamp_us() * 1000) / 1000000;
if (time_stamp_interval_ms > 0)
{
sleep((uint32_t)time_stamp_interval_ms);
}
}
}
/*! @}*/

165
lib/Bosch-BSEC/bsec_integration.h Normal file
View File

@ -0,0 +1,165 @@
/*
* Copyright (C) 2017 Robert Bosch. All Rights Reserved.
*
* Disclaimer
*
* Common:
* Bosch Sensortec products are developed for the consumer goods industry. They may only be used
* within the parameters of the respective valid product data sheet. Bosch Sensortec products are
* provided with the express understanding that there is no warranty of fitness for a particular purpose.
* They are not fit for use in life-sustaining, safety or security sensitive systems or any system or device
* that may lead to bodily harm or property damage if the system or device malfunctions. In addition,
* Bosch Sensortec products are not fit for use in products which interact with motor vehicle systems.
* The resale and/or use of products are at the purchasers own risk and his own responsibility. The
* examination of fitness for the intended use is the sole responsibility of the Purchaser.
*
* The purchaser shall indemnify Bosch Sensortec from all third party claims, including any claims for
* incidental, or consequential damages, arising from any product use not covered by the parameters of
* the respective valid product data sheet or not approved by Bosch Sensortec and reimburse Bosch
* Sensortec for all costs in connection with such claims.
*
* The purchaser must monitor the market for the purchased products, particularly with regard to
* product safety and inform Bosch Sensortec without delay of all security relevant incidents.
*
* Engineering Samples are marked with an asterisk (*) or (e). Samples may vary from the valid
* technical specifications of the product series. They are therefore not intended or fit for resale to third
* parties or for use in end products. Their sole purpose is internal client testing. The testing of an
* engineering sample may in no way replace the testing of a product series. Bosch Sensortec
* assumes no liability for the use of engineering samples. By accepting the engineering samples, the
* Purchaser agrees to indemnify Bosch Sensortec from all claims arising from the use of engineering
* samples.
*
* Special:
* This software module (hereinafter called "Software") and any information on application-sheets
* (hereinafter called "Information") is provided free of charge for the sole purpose to support your
* application work. The Software and Information is subject to the following terms and conditions:
*
* The Software is specifically designed for the exclusive use for Bosch Sensortec products by
* personnel who have special experience and training. Do not use this Software if you do not have the
* proper experience or training.
*
* This Software package is provided `` as is `` and without any expressed or implied warranties,
* including without limitation, the implied warranties of merchantability and fitness for a particular
* purpose.
*
* Bosch Sensortec and their representatives and agents deny any liability for the functional impairment
* of this Software in terms of fitness, performance and safety. Bosch Sensortec and their
* representatives and agents shall not be liable for any direct or indirect damages or injury, except as
* otherwise stipulated in mandatory applicable law.
*
* The Information provided is believed to be accurate and reliable. Bosch Sensortec assumes no
* responsibility for the consequences of use of such Information nor for any infringement of patents or
* other rights of third parties which may result from its use. No license is granted by implication or
* otherwise under any patent or patent rights of Bosch. Specifications mentioned in the Information are
* subject to change without notice.
*
* It is not allowed to deliver the source code of the Software to any third party without permission of
* Bosch Sensortec.
*
*/
/*!
* @file bsec_integration.h
*
* @brief
* Contains BSEC integration API
*/
/*!
* @addtogroup bsec_examples BSEC Examples
* @brief BSEC usage examples
* @{*/
#ifndef __BSEC_INTEGRATION_H__
#define __BSEC_INTEGRATION_H__
#ifdef __cplusplus
extern "C"
{
#endif
/**********************************************************************************************************************/
/* header files */
/**********************************************************************************************************************/
/* Use the following bme680 driver: https://github.com/BoschSensortec/BME680_driver/releases/tag/bme680_v3.5.1 */
#include "bme680.h"
/* BSEC header files are available in the inc/ folder of the release package */
#include "bsec_interface.h"
#include "bsec_datatypes.h"
/**********************************************************************************************************************/
/* type definitions */
/**********************************************************************************************************************/
/* function pointer to the system specific sleep function */
typedef void (*sleep_fct)(uint32_t t_ms);
/* function pointer to the system specific timestamp derivation function */
typedef int64_t (*get_timestamp_us_fct)();
/* function pointer to the function processing obtained BSEC outputs */
typedef void (*output_ready_fct)(int64_t timestamp, float iaq, uint8_t iaq_accuracy, float temperature, float humidity,
float pressure, float raw_temperature, float raw_humidity, float gas, bsec_library_return_t bsec_status,
float static_iaq, float co2_equivalent, float breath_voc_equivalent);
/* function pointer to the function loading a previous BSEC state from NVM */
typedef uint32_t (*state_load_fct)(uint8_t *state_buffer, uint32_t n_buffer);
/* function pointer to the function saving BSEC state to NVM */
typedef void (*state_save_fct)(const uint8_t *state_buffer, uint32_t length);
/* function pointer to the function loading the BSEC configuration string from NVM */
typedef uint32_t (*config_load_fct)(uint8_t *state_buffer, uint32_t n_buffer);
/* structure definitions */
/* Structure with the return value from bsec_iot_init() */
typedef struct{
/*! Result of API execution status */
int8_t bme680_status;
/*! Result of BSEC library */
bsec_library_return_t bsec_status;
}return_values_init;
/**********************************************************************************************************************/
/* function declarations */
/**********************************************************************************************************************/
/*!
* @brief Initialize the BME680 sensor and the BSEC library
*
* @param[in] sample_rate mode to be used (either BSEC_SAMPLE_RATE_ULP or BSEC_SAMPLE_RATE_LP)
* @param[in] temperature_offset device-specific temperature offset (due to self-heating)
* @param[in] bus_write pointer to the bus writing function
* @param[in] bus_read pointer to the bus reading function
* @param[in] sleep pointer to the system-specific sleep function
* @param[in] state_load pointer to the system-specific state load function
*
* @return zero if successful, negative otherwise
*/
return_values_init bsec_iot_init(float sample_rate, float temperature_offset, bme680_com_fptr_t bus_write, bme680_com_fptr_t bus_read,
sleep_fct sleep, state_load_fct state_load, config_load_fct config_load);
/*!
* @brief Runs the main (endless) loop that queries sensor settings, applies them, and processes the measured data
*
* @param[in] sleep pointer to the system-specific sleep function
* @param[in] get_timestamp_us pointer to the system-specific timestamp derivation function
* @param[in] output_ready pointer to the function processing obtained BSEC outputs
* @param[in] state_save pointer to the system-specific state save function
* @param[in] save_intvl interval at which BSEC state should be saved (in samples)
*
* @return return_values_init struct with the result of the API and the BSEC library
*/
void bsec_iot_loop(sleep_fct sleep, get_timestamp_us_fct get_timestamp_us, output_ready_fct output_ready,
state_save_fct state_save, uint32_t save_intvl);
#ifdef __cplusplus
}
#endif
#endif /* __BSEC_INTEGRATION_H__ */
/*! @}*/

59
platformio.ini
View File

@ -9,13 +9,13 @@
;env_default = generic
;env_default = ebox
;env_default = eboxtube
;env_default = heltec
env_default = heltec
;env_default = heltecv2
;env_default = ttgov1
;env_default = ttgov2
;env_default = ttgov21old
;env_default = ttgov21new
env_default = ttgobeam
;env_default = ttgobeam
;env_default = lopy
;env_default = lopy4
;env_default = fipy
@ -32,7 +32,7 @@ description = Paxcounter is a proof-of-concept ESP32 device for metering passeng
release_version = 1.6.83
; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
debug_level = 3
debug_level = 0
; UPLOAD MODE: select esptool to flash via USB/UART, select custom to upload to cloud for OTA
upload_protocol = esptool
;upload_protocol = custom
@ -59,11 +59,10 @@ lib_deps_all =
${common.lib_deps_display}
${common.lib_deps_rgbled}
${common.lib_deps_gps}
build_flags =
-Llib/Bosch-BSEC
-llibalgobsec.a
-include src/hal/${PIOENV}.h
-include src/paxcounter.conf
build_flags_basic =
;-include include/wifiscan.h
-include $PROJECTSRC_DIR/hal/${PIOENV}.h
-include $PROJECTSRC_DIR/paxcounter.conf
-w
;'-DARDUINO_LMIC_PROJECT_CONFIG_H="/$PROJECTSRC_DIR/lmic_config.h"'
'-DARDUINO_LMIC_PROJECT_CONFIG_H=../../../src/lmic_config.h'
@ -71,6 +70,12 @@ build_flags =
'-DLOG_LOCAL_LEVEL=${common.debug_level}'
'-DBINTRAY_PACKAGE="${PIOENV}"'
'-DPROGVERSION="${common.release_version}"'
build_flags_sensors =
-Llib/Bosch-BSEC
-llibalgobsec.a
build_flags_all =
${common.build_flags_basic}
${common.build_flags_sensors}
[env:ebox]
platform = ${common.platform_espressif32}
@ -82,7 +87,7 @@ lib_deps =
${common.lib_deps_basic}
${common.lib_deps_lora}
build_flags =
${common.build_flags}
${common.build_flags_basic}
upload_protocol = ${common.upload_protocol}
extra_scripts = ${common.extra_scripts}
monitor_speed = ${common.monitor_speed}
@ -98,7 +103,7 @@ lib_deps =
${common.lib_deps_lora}
${common.lib_deps_rgbled}
build_flags =
${common.build_flags}
${common.build_flags_basic}
upload_protocol = ${common.upload_protocol}
extra_scripts = ${common.extra_scripts}
monitor_speed = ${common.monitor_speed}
@ -114,7 +119,7 @@ lib_deps =
${common.lib_deps_lora}
${common.lib_deps_display}
build_flags =
${common.build_flags}
${common.build_flags_basic}
upload_protocol = ${common.upload_protocol}
extra_scripts = ${common.extra_scripts}
monitor_speed = ${common.monitor_speed}
@ -130,7 +135,7 @@ lib_deps =
${common.lib_deps_lora}
${common.lib_deps_display}
build_flags =
${common.build_flags}
${common.build_flags_basic}
upload_protocol = ${common.upload_protocol}
extra_scripts = ${common.extra_scripts}
monitor_speed = ${common.monitor_speed}
@ -146,7 +151,7 @@ lib_deps =
${common.lib_deps_lora}
${common.lib_deps_display}
build_flags =
${common.build_flags}
${common.build_flags_basic}
upload_protocol = ${common.upload_protocol}
extra_scripts = ${common.extra_scripts}
monitor_speed = ${common.monitor_speed}
@ -162,7 +167,7 @@ lib_deps =
${common.lib_deps_lora}
${common.lib_deps_display}
build_flags =
${common.build_flags}
${common.build_flags_basic}
upload_protocol = ${common.upload_protocol}
extra_scripts = ${common.extra_scripts}
monitor_speed = ${common.monitor_speed}
@ -178,7 +183,7 @@ lib_deps =
${common.lib_deps_lora}
${common.lib_deps_display}
build_flags =
${common.build_flags}
${common.build_flags_basic}
upload_protocol = ${common.upload_protocol}
extra_scripts = ${common.extra_scripts}
monitor_speed = ${common.monitor_speed}
@ -194,7 +199,7 @@ lib_deps =
${common.lib_deps_lora}
${common.lib_deps_display}
build_flags =
${common.build_flags}
${common.build_flags_basic}
upload_protocol = ${common.upload_protocol}
extra_scripts = ${common.extra_scripts}
monitor_speed = ${common.monitor_speed}
@ -210,7 +215,7 @@ lib_deps =
${common.lib_deps_lora}
${common.lib_deps_gps}
build_flags =
${common.build_flags}
${common.build_flags_all}
-mfix-esp32-psram-cache-issue
upload_protocol = ${common.upload_protocol}
extra_scripts = ${common.extra_scripts}
@ -227,7 +232,7 @@ lib_deps =
${common.lib_deps_lora}
${common.lib_deps_rgbled}
build_flags =
${common.build_flags}
${common.build_flags_basic}
upload_protocol = ${common.upload_protocol}
extra_scripts = ${common.extra_scripts}
monitor_speed = ${common.monitor_speed}
@ -235,7 +240,7 @@ monitor_speed = ${common.monitor_speed}
[env:lopy]
platform = ${common.platform_espressif32}
framework = arduino
board = esp32dev
board = lopy4
board_build.partitions = ${common.board_build.partitions}
upload_speed = 921600
lib_deps =
@ -244,7 +249,7 @@ lib_deps =
${common.lib_deps_rgbled}
${common.lib_deps_gps}
build_flags =
${common.build_flags}
${common.build_flags_basic}
upload_protocol = ${common.upload_protocol}
extra_scripts = ${common.extra_scripts}
monitor_speed = ${common.monitor_speed}
@ -252,7 +257,7 @@ monitor_speed = ${common.monitor_speed}
[env:lopy4]
platform = ${common.platform_espressif32}
framework = arduino
board = esp32dev
board = lopy4
board_build.partitions = ${common.board_build.partitions}
upload_speed = 921600
lib_deps =
@ -261,7 +266,7 @@ lib_deps =
${common.lib_deps_rgbled}
${common.lib_deps_gps}
build_flags =
${common.build_flags}
${common.build_flags_basic}
-mfix-esp32-psram-cache-issue
upload_protocol = ${common.upload_protocol}
extra_scripts = ${common.extra_scripts}
@ -278,7 +283,7 @@ lib_deps =
${common.lib_deps_lora}
${common.lib_deps_rgbled}
build_flags =
${common.build_flags}
${common.build_flags_basic}
upload_protocol = ${common.upload_protocol}
extra_scripts = ${common.extra_scripts}
monitor_speed = ${common.monitor_speed}
@ -294,7 +299,7 @@ lib_deps =
${common.lib_deps_lora}
${common.lib_deps_rgbled}
build_flags =
${common.build_flags}
${common.build_flags_basic}
upload_protocol = ${common.upload_protocol}
extra_scripts = ${common.extra_scripts}
monitor_speed = ${common.monitor_speed}
@ -309,7 +314,7 @@ lib_deps =
${common.lib_deps_basic}
${common.lib_deps_rgbled}
build_flags =
${common.build_flags}
${common.build_flags_basic}
upload_protocol = ${common.upload_protocol}
extra_scripts = ${common.extra_scripts}
monitor_speed = ${common.monitor_speed}
@ -321,7 +326,7 @@ board = featheresp32
board_build.partitions = ${common.board_build.partitions}
upload_speed = 921600
lib_deps = ${common.lib_deps_all}
build_flags = ${common.build_flags}
build_flags = ${common.build_flags_all}
upload_protocol = ${common.upload_protocol}
extra_scripts = ${common.extra_scripts}
monitor_speed = ${common.monitor_speed}
@ -333,7 +338,7 @@ board = esp32dev
board_build.partitions = ${common.board_build.partitions}
upload_speed = 921600
lib_deps = ${common.lib_deps_all}
build_flags = ${common.build_flags}
build_flags = ${common.build_flags_all}
upload_protocol = ${common.upload_protocol}
extra_scripts = ${common.extra_scripts}
monitor_speed = ${common.monitor_speed}

166
src/bme680mems.cpp
View File

@ -5,69 +5,27 @@
// Local logging tag
static const char TAG[] = "main";
#define NUM_USED_OUTPUTS 8
bmeStatus_t bme_status;
void bme_init(void) {
// initialize BME680 sensor
int bme_init(void) {
return_values_init ret = {BME680_OK, BSEC_OK};
struct bme680_dev gas_sensor;
Wire.begin(HAS_BME, 400000); // I2C connect to BME680 sensor with 400 KHz
// configure sensor for I2C communication
gas_sensor.dev_id = BME_ADDR;
gas_sensor.intf = BME680_I2C_INTF;
gas_sensor.read = user_i2c_read;
gas_sensor.write = user_i2c_write;
gas_sensor.delay_ms = user_delay_ms;
gas_sensor.amb_temp = 25;
int8_t rslt = BME680_OK;
rslt = bme680_init(&gas_sensor);
if (rslt == BME680_OK) {
ESP_LOGI(TAG, "BME680 sensor found");
} else {
ESP_LOGE(TAG, "BME680 sensor not found on i2c bus");
return;
}
// configure BME680 sensor in forced mode
uint8_t set_required_settings;
/* Set the temperature, pressure and humidity settings */
gas_sensor.tph_sett.os_hum = BME680_OS_2X;
gas_sensor.tph_sett.os_pres = BME680_OS_4X;
gas_sensor.tph_sett.os_temp = BME680_OS_8X;
gas_sensor.tph_sett.filter = BME680_FILTER_SIZE_3;
/* Set the remaining gas sensor settings and link the heating profile */
gas_sensor.gas_sett.run_gas = BME680_ENABLE_GAS_MEAS;
/* Create a ramp heat waveform in 3 steps */
gas_sensor.gas_sett.heatr_temp = 320; /* degree Celsius */
gas_sensor.gas_sett.heatr_dur = 150; /* milliseconds */
/* Select the power mode */
/* Must be set before writing the sensor configuration */
gas_sensor.power_mode = BME680_FORCED_MODE;
/* Set the required sensor settings needed */
set_required_settings = BME680_OST_SEL | BME680_OSP_SEL | BME680_OSH_SEL |
BME680_FILTER_SEL | BME680_GAS_SENSOR_SEL;
/* Set the desired sensor configuration */
rslt = bme680_set_sensor_settings(set_required_settings, &gas_sensor);
/* Set the power mode */
rslt = bme680_set_sensor_mode(&gas_sensor);
if (rslt == BME680_OK) {
ESP_LOGI(TAG, "BME680 sensor initialized");
} else {
ESP_LOGE(TAG, "BME680 initialization failed");
return;
/* Call to the function which initializes the BSEC library
* Switch on low-power mode and provide no temperature offset */
ret = bsec_iot_init(BSEC_SAMPLE_RATE_LP, 0.0f, user_i2c_write, user_i2c_read,
user_delay_ms, state_load, config_load);
if (ret.bme680_status) {
/* Could not intialize BME680 */
return (int)ret.bme680_status;
} else if (ret.bsec_status) {
/* Could not intialize BSEC library */
return (int)ret.bsec_status;
}
}
@ -90,6 +48,15 @@ bool bme_read(void) {
*/
}
/*
//Call to endless loop function which reads and processes data based on
//sensor settings
//State is saved every 10.000 samples, which means every 10.000 * 3 secs =
//500 minutes
bsec_iot_loop(sleep, get_timestamp_us, output_ready, state_save, 10000);
*/
int8_t user_i2c_read(uint8_t dev_id, uint8_t reg_addr, uint8_t *reg_data,
uint16_t len) {
int8_t rslt = 0; /* Return 0 for Success, non-zero for failure */
@ -122,6 +89,93 @@ int8_t user_i2c_write(uint8_t dev_id, uint8_t reg_addr, uint8_t *reg_data,
return rslt;
}
/*!
* @brief Load previous library state from non-volatile memory
*
* @param[in,out] state_buffer buffer to hold the loaded state string
* @param[in] n_buffer size of the allocated state buffer
*
* @return number of bytes copied to state_buffer
*/
uint32_t state_load(uint8_t *state_buffer, uint32_t n_buffer) {
// ...
// Load a previous library state from non-volatile memory, if available.
//
// Return zero if loading was unsuccessful or no state was available,
// otherwise return length of loaded state string.
// ...
return 0;
}
/*!
* @brief Save library state to non-volatile memory
*
* @param[in] state_buffer buffer holding the state to be stored
* @param[in] length length of the state string to be stored
*
* @return none
*/
void state_save(const uint8_t *state_buffer, uint32_t length) {
// ...
// Save the string some form of non-volatile memory, if possible.
// ...
}
/*!
* @brief Load library config from non-volatile memory
*
* @param[in,out] config_buffer buffer to hold the loaded state string
* @param[in] n_buffer size of the allocated state buffer
*
* @return number of bytes copied to config_buffer
*/
uint32_t config_load(uint8_t *config_buffer, uint32_t n_buffer) {
// ...
// Load a library config from non-volatile memory, if available.
//
// Return zero if loading was unsuccessful or no config was available,
// otherwise return length of loaded config string.
// ...
return 0;
}
/*!
* @brief Interrupt handler for press of a ULP plus button
*
* @return none
*/
void ulp_plus_button_press() {
/* We call bsec_update_subscription() in order to instruct BSEC to perform an
* extra measurement at the next possible time slot
*/
bsec_sensor_configuration_t requested_virtual_sensors[1];
uint8_t n_requested_virtual_sensors = 1;
bsec_sensor_configuration_t
required_sensor_settings[BSEC_MAX_PHYSICAL_SENSOR];
uint8_t n_required_sensor_settings = BSEC_MAX_PHYSICAL_SENSOR;
bsec_library_return_t status = BSEC_OK;
/* To trigger a ULP plus, we request the IAQ virtual sensor with a specific
* sample rate code */
requested_virtual_sensors[0].sensor_id = BSEC_OUTPUT_IAQ;
requested_virtual_sensors[0].sample_rate =
BSEC_SAMPLE_RATE_ULP_MEASUREMENT_ON_DEMAND;
/* Call bsec_update_subscription() to enable/disable the requested virtual
* sensors */
status = bsec_update_subscription(
requested_virtual_sensors, n_requested_virtual_sensors,
required_sensor_settings, &n_required_sensor_settings);
/* The status code would tell is if the request was accepted. It will be
* rejected if the sensor is not already in ULP mode, or if the time
* difference between requests is too short, for example. */
}
void user_delay_ms(uint32_t period) { vTaskDelay(period / portTICK_PERIOD_MS); }
int64_t get_timestamp_us() { return (int64_t)millis() * 1000; }
#endif // HAS_BME

9
src/hal/lopy.h
View File

@ -10,13 +10,8 @@
#define HAS_LED NOT_A_PIN // LoPy4 has no on board mono LED, we use on board RGB LED
#define HAS_RGB_LED (0) // WS2812B RGB LED on GPIO0
// Pins for LORA chip SPI interface, reset line and interrupt lines
#define LORA_SCK (5) // GPIO5 - SX1276 SCK
#define LORA_CS (17) // GPIO17 - SX1276 CS
#define LORA_MISO (19) // GPIO19 - SX1276 MISO
#define LORA_MOSI (27) // GPIO27 - SX1276 MOSI
#define LORA_RST (18) // GPIO18 - SX1276 RESET
#define LORA_IRQ (23) // LoRa IRQ
// Pins for LORA chip SPI interface come from board file, we need some
// additional definitions for LMIC
#define LORA_IO1 (23) // Pin tied via diode to DIO0
#define LORA_IO2 (23) // Pin tied via diode to DIO0

9
src/hal/lopy4.h
View File

@ -19,13 +19,8 @@
#define HAS_RGB_LED (0) // WS2812B RGB LED on GPIO0 (P2)
#define BOARD_HAS_PSRAM // use extra 4MB extern RAM
// Pins for LORA chip SPI interface, reset line and interrupt lines
#define LORA_SCK (5)
#define LORA_CS (18)
#define LORA_MISO (19)
#define LORA_MOSI (27)
#define LORA_RST LMIC_UNUSED_PIN
#define LORA_IRQ (23) // LoRa IRQ
// Pins for LORA chip SPI interface come from board file, we need some
// additional definitions for LMIC
#define LORA_IO1 (23) // Pin tied via diode to DIO0
#define LORA_IO2 (23) // Pin tied via diode to DIO0

16
src/wifiscan.cpp
View File

@ -9,9 +9,25 @@ static wifi_country_t wifi_country = {WIFI_MY_COUNTRY, WIFI_CHANNEL_MIN,
WIFI_CHANNEL_MAX, 100,
WIFI_COUNTRY_POLICY_MANUAL};
typedef struct {
unsigned frame_ctrl : 16;
unsigned duration_id : 16;
uint8_t addr1[6]; // receiver address
uint8_t addr2[6]; // sender address
uint8_t addr3[6]; // filtering address
unsigned sequence_ctrl : 16;
uint8_t addr4[6]; // optional
} wifi_ieee80211_mac_hdr_t;
typedef struct {
wifi_ieee80211_mac_hdr_t hdr;
uint8_t payload[0]; // network data ended with 4 bytes csum (CRC32)
} wifi_ieee80211_packet_t;
// using IRAM_:ATTR here to speed up callback function
IRAM_ATTR void wifi_sniffer_packet_handler(void *buff,
wifi_promiscuous_pkt_type_t type) {
const wifi_promiscuous_pkt_t *ppkt = (wifi_promiscuous_pkt_t *)buff;
const wifi_ieee80211_packet_t *ipkt =
(wifi_ieee80211_packet_t *)ppkt->payload;