timesync fixes

src/irqhandler.cpp

@@ -47,6 +47,7 @@ void irqHandler(void *pvParameters) {
     // is time to be synced?
     if (InterruptStatus & TIMESYNC_IRQ) {
       time_t t = timeProvider();
+      ESP_LOGD(TAG, "Sync time = %d", t);
       if (timeIsValid(t))
         setTime(t);
     }

src/lorawan.cpp

@@ -221,12 +221,7 @@ void onEvent(ev_t ev) {
     // kickoff first send job
     os_setCallback(&sendjob, lora_send);
     // show effective LoRa parameters after join
-    ESP_LOGI(TAG, "ADR=%d, SF=%d, TXPOWER=%d", cfg.adrmode, cfg.lorasf,
+    ESP_LOGI(TAG, "DEVaddr=%08X", LMIC.devaddr);
-             cfg.txpower);
-#if (TIME_SYNC_LORASERVER)
-    // kickoff first time sync
-    send_timesync_req();
-#endif
     break;
 
   case EV_RFU1:
@@ -315,7 +310,6 @@ void onEvent(ev_t ev) {
     if (!(LMIC.opmode & OP_JOINING))
 #if (TIME_SYNC_LORASERVER)
       // if last packet sent was a timesync request, store TX time
-      // if ((LMIC.pendTxPort == TIMEPORT) && timeSyncPending)
       if (LMIC.pendTxPort == TIMEPORT)
         strcpy_P(buff, PSTR("TX TIMESYNC"));
       else

src/main.cpp

@@ -426,16 +426,12 @@ void setup() {
 #endif
 
 #if (TIME_SYNC_LORASERVER)
-  // create time sync task
+  timesync_init(); // create loraserver time sync task
-  timesync_init();
 #endif
 
-  // start pps timepulse
   ESP_LOGI(TAG, "Starting Timekeeper...");
-  assert(timepulse_init()); // setup timepulse
+  assert(timepulse_init()); // setup pps timepulse
-  timepulse_start();
+  timepulse_start();        // starts pps and cyclic time sync
-  timeSync(); // init systime
-  timesyncer.attach(TIME_SYNC_INTERVAL * 60, timeSync);
 
 #endif // TIME_SYNC_INTERVAL
 

src/timekeeper.cpp

@@ -116,6 +116,10 @@ void timepulse_start(void) {
   timerAttachInterrupt(ppsIRQ, &CLOCKIRQ, true);
   timerAlarmEnable(ppsIRQ);
 #endif
+
+  // start cyclic time sync
+  timeSync(); // init systime by RTC or GPS or LORA
+  timesyncer.attach(TIME_SYNC_INTERVAL * 60, timeSync);
 }
 
 // interrupt service routine triggered by either pps or esp32 hardware timer
@@ -225,7 +229,7 @@ void clock_loop(void *taskparameter) { // ClockTask
                               tx_Ticks(IF482_FRAME_SIZE, HAS_IF482);
 #endif
 
-  // output the next second's pulse after timepulse arrived
+  // output the next second's pulse/telegram after pps arrived
   for (;;) {
 
     // wait for timepulse and store UTC time in seconds got

src/timesync.cpp

@@ -33,12 +33,11 @@ static myClock_timepoint time_sync_rx[TIME_SYNC_SAMPLES];
 // send time request message
 void send_timesync_req() {
 
-  // if a timesync handshake is pending or we are not joined then exit
+  // if a timesync handshake is pending then exit
-  if (timeSyncPending || !LMIC.devaddr)
+  if (timeSyncPending)
     return;
   // else unblock timesync task
   else {
-    timeSyncPending = true;
     ESP_LOGI(TAG, "[%0.3f] Timeserver sync request started", millis() / 1000.0);
     xTaskNotifyGive(timeSyncReqTask);
   }
@@ -49,7 +48,7 @@ void process_timesync_req(void *taskparameter) {
 
   uint8_t k;
   uint16_t time_to_set_fraction_msec;
-  uint32_t seq_no, time_to_set;
+  uint32_t seq_no = 0, time_to_set;
   auto time_offset_ms = myClock_msecTick::zero();
 
   while (1) {
@@ -61,6 +60,12 @@ void process_timesync_req(void *taskparameter) {
 
     // wait for kickoff
     ulTaskNotifyTake(pdFALSE, portMAX_DELAY);
+    timeSyncPending = true;
+
+    // wait until we are joined if we are not
+    while (!LMIC.devaddr) {
+      vTaskDelay(5000);
+    }
 
     // collect timestamp samples
     for (uint8_t i = 0; i < TIME_SYNC_SAMPLES; i++) {
@@ -69,15 +74,18 @@ void process_timesync_req(void *taskparameter) {
       payload.addByte(time_sync_seqNo);
       SendPayload(TIMEPORT, prio_high);
 
-      // wait for notification from recv_timesync_ans()
+      // wait for a valid timestamp from recv_timesync_ans()
-      if ((xTaskNotifyWait(0x00, ULONG_MAX, &seq_no,
+      while (seq_no != time_sync_seqNo) {
+        if (xTaskNotifyWait(0x00, ULONG_MAX, &seq_no,
                             pdMS_TO_TICKS(TIME_SYNC_TIMEOUT * 1000)) ==
-           pdFALSE) ||
+            pdFALSE) {
-          (seq_no != time_sync_seqNo))
+          ESP_LOGW(TAG, "[%0.3f] Timesync handshake error: timeout",
-        goto error; // no valid sequence received before timeout
+                   millis() / 1000.0);
+          goto finish; // no valid sequence received before timeout
+        }
+      }
 
       // process answer
-      else {
       k = seq_no % TIME_SYNC_SAMPLES;
 
       // calculate time diff from collected timestamps
@@ -100,12 +108,15 @@ void process_timesync_req(void *taskparameter) {
         // ...send a alive open a receive window for last time_sync_answer
         // LMIC_sendAlive();
       }
-      }
     } // end of for loop to collect timestamp samples
 
     // begin of time critical section: lock app irq's and I2C bus
-    if (!mask_user_IRQ())
+    if (!mask_user_IRQ()) {
-      goto error; // failure
+      ESP_LOGW(TAG,
+               "[%0.3f] Timesync handshake error: irq / i2c masking failed",
+               millis() / 1000.0);
+      goto finish; // failure
+    }
 
     // average time offset over all collected diffs
     time_offset_ms /= TIME_SYNC_SAMPLES;
@@ -127,12 +138,6 @@ void process_timesync_req(void *taskparameter) {
     // end of time critical section: release I2C bus and re-enable app irq's
     unmask_user_IRQ();
 
-    goto finish;
-
-  error:
-    ESP_LOGW(TAG, "[%0.3f] Timeserver error: handshake timed out",
-             millis() / 1000.0);
-
   finish:
     timeSyncPending = false;
 
@@ -142,14 +147,16 @@ void process_timesync_req(void *taskparameter) {
 // called from lorawan.cpp after time_sync_req was sent
 void store_time_sync_req(uint32_t timestamp) {
 
-  if (timeSyncPending) {
+  // if no timesync handshake is pending then exit
+  if (!timeSyncPending)
+    return;
 
   uint8_t k = time_sync_seqNo % TIME_SYNC_SAMPLES;
   time_sync_tx[k] += milliseconds(timestamp);
 
-    ESP_LOGD(TAG, "[%0.3f] Timesync request #%d sent at %d.%03d",
+  ESP_LOGD(TAG, "[%0.3f] Timesync request #%d of %d sent at %d.%03d",
-             millis() / 1000.0, k, timestamp / 1000, timestamp % 1000);
+           millis() / 1000.0, k + 1, TIME_SYNC_SAMPLES, timestamp / 1000,
-  }
+           timestamp % 1000);
 }
 
 // process timeserver timestamp answer, called from lorawan.cpp
@@ -190,8 +197,9 @@ int recv_timesync_ans(uint8_t seq_no, uint8_t buf[], uint8_t buf_len) {
 
     // we guess timepoint is recent if it newer than code compile date
     if (timeIsValid(myClock::to_time_t(time_sync_rx[k]))) {
-      ESP_LOGD(TAG, "[%0.3f] Timesync request #%d rcvd at %d.%03d",
+      ESP_LOGD(TAG, "[%0.3f] Timesync request #%d of %d rcvd at %d.%03d",
-               millis() / 1000.0, k, timestamp_sec, timestamp_msec);
+               millis() / 1000.0, k + 1, TIME_SYNC_SAMPLES, timestamp_sec,
+               timestamp_msec);
 
       // inform processing task
       xTaskNotify(timeSyncReqTask, seq_no, eSetBits);