Fixed and Moved reading HW deveui to lorawan.cpp

src/lorawan.cpp

@@ -7,6 +7,10 @@
 #include <lmic.h>
 #include <hal/hal.h>
 
+#ifdef MCP_24AA02E64_I2C_ADDRESS
+#include <Wire.h> // Needed for 24AA02E64, does not hurt anything if included and not used
+#endif
+
 uint8_t mydata[] = "0000";
 
 // Local logging Tag
@@ -46,6 +50,37 @@ void RevBytes(unsigned char* b, size_t c)
     b[c - 1 - i] = t; }
 }
 
+void get_hard_deveui(uint8_t *pdeveui) {
+    // read DEVEUI from Microchip 24AA02E64 2Kb serial eeprom if present
+#ifdef MCP_24AA02E64_I2C_ADDRESS
+    uint8_t i2c_ret;
+    // Init this just in case, no more to 100KHz
+    Wire.begin(OLED_SDA, OLED_SCL, 100000);
+    Wire.beginTransmission(MCP_24AA02E64_I2C_ADDRESS);
+    Wire.write(MCP_24AA02E64_MAC_ADDRESS); 
+    i2c_ret = Wire.endTransmission();
+    // check if device seen on i2c bus
+    if (i2c_ret == 0) {
+        char deveui[32]="";
+        uint8_t data;
+        Wire.beginTransmission(MCP_24AA02E64_I2C_ADDRESS);
+        Wire.write(MCP_24AA02E64_MAC_ADDRESS); 
+        Wire.requestFrom(MCP_24AA02E64_I2C_ADDRESS, 8);
+        while (Wire.available()) {
+            data = Wire.read();
+            sprintf(deveui+strlen(deveui), "%02X ", data) ;
+            *pdeveui++ = data;
+        }
+        i2c_ret = Wire.endTransmission();
+        ESP_LOGI(TAG, "Serial EEPROM 24AA02E64 found, read DEVEUI %s", deveui);
+    } else {
+        ESP_LOGI(TAG, "Serial EEPROM 24AA02E64 not found ret=%d", i2c_ret);
+    }
+    // Set back to 400KHz to speed up OLED
+    Wire.setClock(400000);
+#endif // MCP 24AA02E64    
+}
+
 #ifdef VERBOSE
 
 // Display a key

src/main.cpp

@@ -29,7 +29,7 @@ Refer to LICENSE.txt file in repository for more details.
 #include <set>
 
 // OLED driver
-#include <U8x8lib.h> // includes <wire.h> if needed for other on board i2c components
+#include <U8x8lib.h>
 
 // LMIC-Arduino LoRaWAN Stack
 #include "loraconf.h"
@@ -85,6 +85,8 @@ void loadConfig(void);
 // defined in lorawan.cpp
 void gen_lora_deveui(uint8_t * pdeveui);
 void RevBytes(unsigned char* b, size_t c);
+void get_hard_deveui(uint8_t *pdeveui);
+
 
 #ifdef VERBOSE
     void printKeys(void);
@@ -103,12 +105,20 @@ void os_getArtEui (u1_t *buf) {
 void os_getDevEui (u1_t* buf) {
     int i=0, k=0;
     memcpy(buf, DEVEUI, 8); // get fixed DEVEUI from loraconf.h 
-    for (i=0; i<8 ; i++)
+    for (i=0; i<8 ; i++) {
         k += buf[i];
-    if (k) 
+    }
+    if (k) {
         RevBytes(buf, 8); // use fixed DEVEUI and swap bytes to LSB format
-    else
+    } else {
         gen_lora_deveui(buf); // generate DEVEUI from device's MAC
+    }
+
+    // Get MCP 24AA02E64 hardware DEVEUI (override default settings if found)
+    #ifdef MCP_24AA02E64_I2C_ADDRESS
+        get_hard_deveui(buf); 
+        RevBytes(buf, 8); // swap bytes to LSB format
+    #endif
 }
 
 // LMIC enhanced Pin mapping
@@ -457,30 +467,6 @@ void setup() {
     antenna_init();
 #endif
 
-    // read DEVEUI from Microchip 24AA02E64 2Kb serial eeprom if present
-#ifdef MCP_24AA02E64_I2C_ADDRESS
-    uint8_t i2c_ret;
-    // Init this before OLED, we just need to get value then we're done with i2c bus
-    Wire.begin(OLED_SDA, OLED_SDA, 100000);
-    Wire.beginTransmission(MCP_24AA02E64_I2C_ADDRESS);
-    Wire.write(MCP_24AA02E64_MAC_ADDRESS); 
-    i2c_ret = Wire.endTransmission();
-    // check if device seen on i2c bus
-    if (i2c_ret == 0) {
-        char deveui[24];
-        uint8_t data;
-        Wire.beginTransmission(MCP_24AA02E64_I2C_ADDRESS);
-        while (Wire.available()) {
-            data = Wire.read();
-            sprintf(deveui+strlen(deveui), "%02X ", data) ;
-        }
-        i2c_ret = Wire.endTransmission();
-        ESP_LOGI(TAG, "Serial EEPROM 24AA02E64 found, read DEVEUI %s", deveui);
-    } else {
-        ESP_LOGI(TAG, "Serial EEPROM 24AA02E64 not found ret=%d", i2c_ret);
-    }
-#endif // MCP 24AA02E64
-
 // initialize display  
     init_display(PROGNAME, PROGVERSION);     
     u8x8.setPowerSave(!cfg.screenon); // set display off if disabled