hal file comments edited

src/hal/ebox.h

@@ -13,7 +13,7 @@
 #define HAS_BUTTON (0) // button "PROG" on board
 #define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
 
-// Pins for LORA chip reset and interrupt lines
+// Pins for LORA chip SPI interface, reset line and interrupt lines
 #define LORA_SCK  (5) 
 #define LORA_CS   (18)
 #define LORA_MISO (19)

src/hal/eboxtube.h

@@ -14,7 +14,7 @@
 #define HAS_BUTTON (0)   // button "FLASH" on board
 #define DISABLE_BROWNOUT 1      // comment out if you want to keep brownout feature
 
-// Pins for LORA chip reset and interrupt lines
+// Pins for LORA chip SPI interface, reset line and interrupt lines
 #define LORA_SCK  (5) 
 #define LORA_CS   (18)
 #define LORA_MISO (19)

src/hal/fipy.h

@@ -13,7 +13,7 @@
 #define HAS_RGB_LED GPIO_NUM_0 // WS2812B RGB LED on GPIO0
 #define BOARD_HAS_PSRAM        // use extra 4MB extern RAM
 
-// Pins for LORA chip reset and interrupt lines
+// Pins for LORA chip SPI interface, reset line and interrupt lines
 #define LORA_SCK  (5) 
 #define LORA_CS   (18)
 #define LORA_MISO (19)

src/hal/generic.h

@@ -32,7 +32,7 @@
 #define MY_OLED_SCL (15)
 #define MY_OLED_RST (16)
 
-// Pins for LORA chip reset and interrupt lines
+// Pins for LORA chip SPI interface, reset line and interrupt lines
 #define LORA_SCK  (5) 
 #define LORA_CS   (18)
 #define LORA_MISO (19)

src/hal/heltec.h

@@ -18,7 +18,7 @@
 #define MY_OLED_SCL (15)
 #define MY_OLED_RST (16)
 
-// Pins for LORA chip reset and interrupt lines
+// Pins for LORA chip SPI interface, reset line and interrupt lines
 #define LORA_SCK  (5) 
 #define LORA_CS   (18)
 #define LORA_MISO (19)

src/hal/heltecv2.h

@@ -18,7 +18,7 @@
 #define OLED_SCL (15)
 #define OLED_RST (16)
 
-// Pins for LORA chip reset and interrupt lines
+// Pins for LORA chip SPI interface, reset line and interrupt lines
 #define LORA_SCK  (5) 
 #define LORA_CS   (18)
 #define LORA_MISO (19)

src/hal/lolin32litelora.h

@@ -21,7 +21,7 @@
 #define HAS_SPI   1       // comment out if device shall not send data via SPI
 #define CFG_sx1276_radio 1 // RFM95 module
 
-// Pins for LORA chip reset and interrupt lines
+// Pins for LORA chip SPI interface, reset line and interrupt lines
 #define LORA_SCK  (5) 
 #define LORA_CS   (18)
 #define LORA_MISO (19)

src/hal/lolin32lora.h

@@ -22,7 +22,7 @@
 #define HAS_SPI   1       // comment out if device shall not send data via SPI
 #define CFG_sx1276_radio 1 // RFM95 module
 
-// Pins for LORA chip reset and interrupt lines
+// Pins for LORA chip SPI interface, reset line and interrupt lines
 #define LORA_SCK  (5) 
 #define LORA_CS   (18)
 #define LORA_MISO (19)

src/hal/lopy.h

@@ -11,7 +11,7 @@
 #define HAS_LED NOT_A_PIN // LoPy4 has no on board mono LED, we use on board RGB LED
 #define HAS_RGB_LED (0)  // WS2812B RGB LED on GPIO0
 
-// Pins for LORA chip reset and interrupt lines
+// Pins for LORA chip SPI interface, reset line and interrupt lines
 #define LORA_SCK  (5)  // GPIO5  - SX1276 SCK
 #define LORA_CS   (17) // GPIO17 - SX1276 CS
 #define LORA_MISO (19) // GPIO19 - SX1276 MISO

src/hal/lopy4.h

@@ -12,7 +12,7 @@
 #define HAS_RGB_LED (0)  // WS2812B RGB LED on GPIO0 (P2)
 #define BOARD_HAS_PSRAM // use extra 4MB extern RAM
 
-// Pins for LORA chip reset and interrupt lines
+// Pins for LORA chip SPI interface, reset line and interrupt lines
 #define LORA_SCK  (5) 
 #define LORA_CS   (18)
 #define LORA_MISO (19)

src/hal/octopus32.h

@@ -20,7 +20,7 @@
 #define HAS_SPI   1       // comment out if device shall not send data via SPI
 #define CFG_sx1276_radio 1 // RFM95 module
 
-// Pins for LORA chip reset and interrupt lines
+// Pins for LORA chip SPI interface, reset line and interrupt lines
 #define LORA_SCK  (5) 
 #define LORA_CS   (14)
 #define LORA_MISO (19)

src/hal/ttgobeam.h

@@ -19,7 +19,7 @@
 #define HAS_GPS 1 // use on board GPS
 #define GPS_SERIAL 9600, SERIAL_8N1, GPIO_NUM_12, GPIO_NUM_15 // UBlox NEO 6M or 7M with default configuration
 
-// Pins for LORA chip reset and interrupt lines
+// Pins for LORA chip SPI interface, reset line and interrupt lines
 #define LORA_SCK  (5) 
 #define LORA_CS   (18)
 #define LORA_MISO (19)

src/hal/ttgov1.h

@@ -20,7 +20,7 @@
 #define MY_OLED_SCL (15)
 #define MY_OLED_RST (16)
 
-// Pins for LORA chip reset and interrupt lines
+// Pins for LORA chip SPI interface, reset line and interrupt lines
 #define LORA_SCK  (5) 
 #define LORA_CS   (18)
 #define LORA_MISO (19)

src/hal/ttgov2.h

@@ -21,7 +21,7 @@
 #define MY_OLED_SCL (22)
 #define MY_OLED_RST U8X8_PIN_NONE
 
-// Pins for LORA chip reset and interrupt lines
+// Pins for LORA chip SPI interface, reset line and interrupt lines
 #define LORA_SCK  (5) 
 #define LORA_CS   (18)
 #define LORA_MISO (19)

src/hal/ttgov21new.h

@@ -22,7 +22,7 @@
 #define MY_OLED_SCL (22)
 #define MY_OLED_RST U8X8_PIN_NONE
 
-// Pins for LORA chip reset and interrupt lines
+// Pins for LORA chip SPI interface, reset line and interrupt lines
 #define LORA_SCK  (5) 
 #define LORA_CS   (18)
 #define LORA_MISO (19)

src/hal/ttgov21old.h

@@ -25,7 +25,7 @@
 #define MY_OLED_SCL (22)
 #define MY_OLED_RST U8X8_PIN_NONE
 
-// Pins for LORA chip reset and interrupt lines
+// Pins for LORA chip SPI interface, reset line and interrupt lines
 #define LORA_SCK  (5) 
 #define LORA_CS   (18)
 #define LORA_MISO (19)