timesync code sanitized

README.md

@@ -405,11 +405,11 @@ Note: all settings are stored in NVRAM and will be reloaded when device starts.
 	bytes 1..4 = time/date in UTC epoch seconds (LSB)
 	byte 5 = time source & status, see below
 	
-		bits 0..3 time source
+		bits 0..3 last seen time source
 			0x00 = GPS
 			0x01 = RTC
 			0x02 = LORA
-			0x03 = unsynched
+			0x03 = unsynched (never synched)
 	
 		bits 4..7 time status
 			0x00 = timeNotSet (never synched)

include/timekeeper.h

@@ -26,7 +26,7 @@ void timepulse_start(void);
 void timeSync(void);
 uint8_t timepulse_init(void);
 time_t timeIsValid(time_t const t);
-time_t timeProvider(void);
+void calibrateTime(void);
 time_t compiledUTC(void);
 TickType_t tx_Ticks(uint32_t framesize, unsigned long baud, uint32_t config,
                     int8_t rxPin, int8_t txPins);

include/timesync.h

@@ -15,6 +15,6 @@ void send_timesync_req(void);
 int recv_timesync_ans(uint8_t seq_no, uint8_t buf[], uint8_t buf_len);
 void process_timesync_req(void *taskparameter);
 void store_time_sync_req(uint32_t t_millisec);
-void IRAM_ATTR setMyTime(uint32_t t_sec, uint16_t t_msec);
+void IRAM_ATTR setMyTime(uint32_t t_sec, uint16_t t_msec, timesource_t timesource);
 
 #endif

src/irqhandler.cpp

@@ -59,9 +59,7 @@ void irqHandler(void *pvParameters) {
     // is time to be synced?
     if (InterruptStatus & TIMESYNC_IRQ) {
       now(); // ensure sysTime is recent
-      time_t t = timeProvider();
-      if (timeIsValid(t))
-        setTime(t);
+      calibrateTime();
     }
 #endif
 

src/lorawan.cpp

@@ -464,11 +464,6 @@ void lora_enqueuedata(MessageBuffer_t *message, sendprio_t prio) {
 
 void lora_queuereset(void) { xQueueReset(LoraSendQueue); }
 
-void lora_housekeeping(void) {
-  // ESP_LOGD(TAG, "loraloop %d bytes left",
-  // uxTaskGetStackHighWaterMark(LoraTask));
-}
-
 #if (TIME_SYNC_LORAWAN)
 void IRAM_ATTR user_request_network_time_callback(void *pVoidUserUTCTime,
                                                   int flagSuccess) {
@@ -510,7 +505,7 @@ void IRAM_ATTR user_request_network_time_callback(void *pVoidUserUTCTime,
   time_t requestDelaySec = osticks2ms(ticksNow - ticksRequestSent) / 1000;
 
   // Update system time with time read from the network
-  setMyTime(*pUserUTCTime + requestDelaySec, 0);
+  setMyTime(*pUserUTCTime + requestDelaySec, 0, _lora);
 
 finish:
   // end of time critical section: release app irq lock
@@ -523,7 +518,7 @@ finish:
 void lmictask(void *pvParameters) {
   configASSERT(((uint32_t)pvParameters) == 1); // FreeRTOS check
 
-  os_init();    // initialize lmic run-time environment on core 1
+  os_init();    // initialize lmic run-time environment
   LMIC_reset(); // initialize lmic MAC
   LMIC_setLinkCheckMode(0);
   // This tells LMIC to make the receive windows bigger, in case your clock is

src/timekeeper.cpp

@@ -22,9 +22,10 @@ Ticker timesyncer;
 
 void timeSync() { xTaskNotify(irqHandlerTask, TIMESYNC_IRQ, eSetBits); }
 
-time_t timeProvider(void) {
+void calibrateTime(void) {
 
   time_t t = 0;
+  timesource_t timeSource;
 
 #if (HAS_GPS)
   // fetch recent time from last NMEA record
@@ -34,9 +35,7 @@ time_t timeProvider(void) {
     set_rtctime(t); // calibrate RTC
 #endif
     timeSource = _gps;
-    timesyncer.attach(TIME_SYNC_INTERVAL * 60, timeSync); // regular repeat
-    ESP_LOGD(TAG, "GPS time = %d", t);
-    return t;
+    goto finish;
   }
 #endif
 
@@ -45,8 +44,7 @@ time_t timeProvider(void) {
   t = get_rtctime();
   if (t) {
     timeSource = _rtc;
-    timesyncer.attach(TIME_SYNC_INTERVAL_RETRY * 60, timeSync); // short retry
-    ESP_LOGD(TAG, "RTC time = %d", t);
+    goto finish
   }
 #endif
 
@@ -58,14 +56,17 @@ time_t timeProvider(void) {
   LMIC_requestNetworkTime(user_request_network_time_callback, &userUTCTime);
 #endif
 
-  if (!t) {
-    timeSource = _unsynced;
-    timesyncer.attach(TIME_SYNC_INTERVAL_RETRY * 60, timeSync); // short retry
+finish:
+
+  if (t) {                       // sync successful
+    setMyTime(t, 0, timeSource); // set time
+    timesyncer.attach(TIME_SYNC_INTERVAL * 60, timeSync);
+    ESP_LOGD(TAG, "time = %d | source: %c", t, timeSetSymbols[timeSource]);
+  } else { // sync failed, we want to retry shortly
+    timesyncer.attach(TIME_SYNC_INTERVAL_RETRY * 60, timeSync);
   }
 
-  return t;
-
-} // timeProvider()
+} // calibrateTime()
 
 // helper function to setup a pulse per second for time synchronisation
 uint8_t timepulse_init() {

src/timesync.cpp

@@ -128,7 +128,7 @@ void process_timesync_req(void *taskparameter) {
     // calculate fraction milliseconds
     time_to_set_fraction_msec = (uint16_t)(time_offset_ms.count() % 1000);
 
-    setMyTime(time_to_set, time_to_set_fraction_msec);
+    setMyTime(time_to_set, time_to_set_fraction_msec, _lora);
 
   finish:
     // end of time critical section: release app irq lock
@@ -208,7 +208,8 @@ int recv_timesync_ans(uint8_t seq_no, uint8_t buf[], uint8_t buf_len) {
 }
 
 // adjust system time, calibrate RTC and RTC_INT pps
-void IRAM_ATTR setMyTime(uint32_t t_sec, uint16_t t_msec) {
+void IRAM_ATTR setMyTime(uint32_t t_sec, uint16_t t_msec,
+                         timesource_t timesource) {
 
   time_t time_to_set = (time_t)(t_sec + 1);
 
@@ -218,7 +219,8 @@ void IRAM_ATTR setMyTime(uint32_t t_sec, uint16_t t_msec) {
   if (timeIsValid(time_to_set)) {
 
     // wait until top of second with millisecond precision
-    vTaskDelay(pdMS_TO_TICKS(1000 - t_msec));
+    if (t_msec)
+      vTaskDelay(pdMS_TO_TICKS(1000 - t_msec));
 
 // set RTC time and calibrate RTC_INT pulse on top of second
 #ifdef HAS_RTC
@@ -233,7 +235,7 @@ void IRAM_ATTR setMyTime(uint32_t t_sec, uint16_t t_msec) {
 
     setTime(time_to_set); // set the time on top of second
 
-    timeSource = _lora;
+    timeSource = timesource;
     timesyncer.attach(TIME_SYNC_INTERVAL * 60, timeSync); // regular repeat
     ESP_LOGI(TAG, "[%0.3f] Timesync finished, time was adjusted",
              millis() / 1000.0);