From 0fda206ee606e926e841cfedb8a9ca096282e2d4 Mon Sep 17 00:00:00 2001 From: Klaus K Wilting Date: Sun, 24 Jun 2018 11:17:55 +0200 Subject: [PATCH] lopy.h + lopy4.h updated --- src/hal/lopy.h | 30 +++++++++++++++++++++--------- src/hal/lopy4.h | 32 ++++++++++++++++++++++---------- 2 files changed, 43 insertions(+), 19 deletions(-) diff --git a/src/hal/lopy.h b/src/hal/lopy.h index d9d4068d..11b3cff2 100644 --- a/src/hal/lopy.h +++ b/src/hal/lopy.h @@ -4,15 +4,6 @@ #define HAS_LED NOT_A_PIN // LoPy4 has no on board LED, so we use RGB LED on LoPy4 #define HAS_RGB_LED GPIO_NUM_0 // WS2812B RGB LED on GPIO0 -// !!EXPERIMENTAL - not tested yet!! -// uncomment this only if your LoPy runs on a Pytrack expansion board with GPS -// see http://www.quectel.com/UploadImage/Downlad/Quectel_L76-L_I2C_Application_Note_V1.0.pdf -//#define HAS_GPS 1 -//#define GPS_QUECTEL_L76 GPIO_NUM_25, GPIO_NUM_26 // SDA (P22), SCL (P21) -//#define GPS_ADDR 0x10 -//#define HAS_BUTTON GPIO_NUM_37 // (P14) -//#define BUTTON_PULLUP 1 // Button need pullup instead of default pulldown - // Hardware pin definitions for Pycom LoPy board #define PIN_SPI_SS GPIO_NUM_17 #define PIN_SPI_MOSI GPIO_NUM_27 @@ -26,3 +17,24 @@ // select WIFI antenna (internal = onboard / external = u.fl socket) #define HAS_ANTENNA_SWITCH 16 // pin for switching wifi antenna #define WIFI_ANTENNA 0 // 0 = internal, 1 = external + +// !!EXPERIMENTAL - not tested yet!! +// uncomment this only if your LoPy runs on a Pytrack expansion board with GPS +// see http://www.quectel.com/UploadImage/Downlad/Quectel_L76-L_I2C_Application_Note_V1.0.pdf +//#define HAS_GPS 1 +//#define GPS_QUECTEL_L76 GPIO_NUM_25, GPIO_NUM_26 // SDA (P22), SCL (P21) +//#define GPS_ADDR 0x10 +//#define HAS_BUTTON GPIO_NUM_37 // (P14) +//#define BUTTON_PULLUP 1 // Button need pullup instead of default pulldown + +// uncomment this only if your LoPy runs on a expansion board 3.0 +//#define HAS_BATTERY_PROBE ADC1_GPIO39_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7 +//#define BATT_FACTOR 2 // voltage divider 1MOhm/1MOhm on board +//#define HAS_BUTTON GPIO_NUM_37 // (P14) +//#define BUTTON_PULLUP 1 // Button need pullup instead of default pulldown + +// uncomment this only if your LoPy runs on a expansion board 2.0 +//#define HAS_BATTERY_PROBE ADC1_GPIO39_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7 +//#define BATT_FACTOR 4 // voltage divider 115kOhm/56kOhm on board +//#define HAS_BUTTON GPIO_NUM_13 // (P10) +//#define BUTTON_PULLUP 1 // Button need pullup instead of default pulldown diff --git a/src/hal/lopy4.h b/src/hal/lopy4.h index e5481f12..ef6a4d77 100644 --- a/src/hal/lopy4.h +++ b/src/hal/lopy4.h @@ -4,15 +4,6 @@ #define HAS_LED NOT_A_PIN // LoPy4 has no on board LED, so we use RGB LED on LoPy4 #define HAS_RGB_LED GPIO_NUM_0 // WS2812B RGB LED on GPIO0 -// !!EXPERIMENTAL - not tested yet!! -// uncomment this only if your LoPy runs on a Pytrack expansion board with GPS -// see http://www.quectel.com/UploadImage/Downlad/Quectel_L76-L_I2C_Application_Note_V1.0.pdf -//#define HAS_GPS 1 -//#define GPS_QUECTEL_L76 GPIO_NUM_25, GPIO_NUM_26 // SDA (P22), SCL (P21) -//#define GPS_ADDR 0x10 -//#define HAS_BUTTON GPIO_NUM_37 // (P14) -//#define BUTTON_PULLUP 1 // Button need pullup instead of default pulldown - // Hardware pin definitions for Pycom LoPy4 board #define PIN_SPI_SS GPIO_NUM_18 #define PIN_SPI_MOSI GPIO_NUM_27 @@ -25,4 +16,25 @@ // select WIFI antenna (internal = onboard / external = u.fl socket) #define HAS_ANTENNA_SWITCH 21 // pin for switching wifi antenna -#define WIFI_ANTENNA 0 // 0 = internal, 1 = external \ No newline at end of file +#define WIFI_ANTENNA 0 // 0 = internal, 1 = external + +// !!EXPERIMENTAL - not tested yet!! +// uncomment this only if your LoPy runs on a Pytrack expansion board with GPS +// see http://www.quectel.com/UploadImage/Downlad/Quectel_L76-L_I2C_Application_Note_V1.0.pdf +//#define HAS_GPS 1 +//#define GPS_QUECTEL_L76 GPIO_NUM_25, GPIO_NUM_26 // SDA (P22), SCL (P21) +//#define GPS_ADDR 0x10 +//#define HAS_BUTTON GPIO_NUM_37 // (P14) +//#define BUTTON_PULLUP 1 // Button need pullup instead of default pulldown + +// uncomment this only if your LoPy runs on a expansion board 3.0 +//#define HAS_BATTERY_PROBE ADC1_GPIO39_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7 +//#define BATT_FACTOR 2 // voltage divider 1MOhm/1MOhm on board +//#define HAS_BUTTON GPIO_NUM_37 // (P14) +//#define BUTTON_PULLUP 1 // Button need pullup instead of default pulldown + +// uncomment this only if your LoPy runs on a expansion board 2.0 +//#define HAS_BATTERY_PROBE ADC1_GPIO39_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7 +//#define BATT_FACTOR 4 // voltage divider 115kOhm/56kOhm on board +//#define HAS_BUTTON GPIO_NUM_13 // (P10) +//#define BUTTON_PULLUP 1 // Button need pullup instead of default pulldown \ No newline at end of file