DigitalInfinity/ESP32-PaxCounter
1
0 Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

new oled driver (experimental)

Browse Source
This commit is contained in:
Verkehrsrot committed 2019-09-27 12:47:00 +02:00
1 parent cb67e368ba
commit 0f9e2dfd63
21 files changed
+190 -222
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

src/hal/ecopower.h
+2 -2
View File
@@ -12,7 +12,7 @@
//#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
#define HAS_DISPLAY 1
//#define DISPLAY_FLIP 1 // use if display is rotated
#define BAT_MEASURE_ADC ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
#define BAT_VOLTAGE_DIVIDER ((82.0+220.0)/82.0) // 82k + 220k 1%
@@ -29,7 +29,7 @@
// Pins for I2C interface of OLED Display
#define MY_OLED_SDA SDA
#define MY_OLED_SCL SCL
#define MY_OLED_RST U8X8_PIN_NONE
#define MY_OLED_RST NOT_A_PIN
// Settings for on board DS3231 RTC chip
// note: to use RTC_INT, capacitor 100nF next to red LED must be removed to sharpen interrupt signal slope
src/hal/generic.h
+1 -1
View File
@@ -44,7 +44,7 @@
#define BOARD_HAS_PSRAM // use if board has external PSRAM
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
#define HAS_DISPLAY 1
//#define DISPLAY_FLIP 1 // use if display is rotated
#define BAT_MEASURE_ADC ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
#define BAT_VOLTAGE_DIVIDER 2 // voltage divider 100k/100k on board
src/hal/heltec.h
+1 -1
View File
@@ -16,7 +16,7 @@
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
#define CFG_sx1276_radio 1
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board
#define HAS_DISPLAY 1 // OLED-Display on board
#define HAS_LED LED_BUILTIN // white LED on board
#define HAS_BUTTON KEY_BUILTIN // button "PROG" on board
src/hal/heltecv2.h
+1 -1
View File
@@ -16,7 +16,7 @@
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
#define CFG_sx1276_radio 1
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board
#define HAS_DISPLAY 1 // OLED-Display on board
#define HAS_LED LED_BUILTIN // white LED on board
#define HAS_BUTTON KEY_BUILTIN // button "PROG" on board
src/hal/lolin32litelora.h
+2 -2
View File
@@ -13,7 +13,7 @@
// disable brownout detection (avoid unexpected reset on some boards)
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board
#define HAS_DISPLAY 1 // OLED-Display on board
//#define DISPLAY_FLIP 1 // uncomment this for rotated display
#define HAS_LED 22 // ESP32 GPIO12 (pin22) On Board LED
#define LED_ACTIVE_LOW 1 // Onboard LED is active when pin is LOW
@@ -37,7 +37,7 @@
// Pins for I2C interface of OLED Display
#define MY_OLED_SDA (14)
#define MY_OLED_SCL (12)
#define MY_OLED_RST U8X8_PIN_NONE
#define MY_OLED_RST NOT_A_PIN
// I2C config for Microchip 24AA02E64 DEVEUI unique address
#define MCP_24AA02E64_I2C_ADDRESS 0x50 // I2C address for the 24AA02E64
src/hal/lolin32lora.h
+2 -2
View File
@@ -13,7 +13,7 @@
// disable brownout detection (avoid unexpected reset on some boards)
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board
#define HAS_DISPLAY 1 // OLED-Display on board
//#define DISPLAY_FLIP 1 // uncomment this for rotated display
#define HAS_LED NOT_A_PIN // Led os on same pin as Lora SS pin, to avoid problems, we don't use it
#define LED_ACTIVE_LOW 1 // Onboard LED is active when pin is LOW
@@ -39,7 +39,7 @@
// Pins for I2C interface of OLED Display
#define MY_OLED_SDA (21)
#define MY_OLED_SCL (22)
#define MY_OLED_RST U8X8_PIN_NONE
#define MY_OLED_RST NOT_A_PIN
// I2C config for Microchip 24AA02E64 DEVEUI unique address
#define MCP_24AA02E64_I2C_ADDRESS 0x50 // I2C address for the 24AA02E64
src/hal/octopus32.h
+2 -2
View File
@@ -41,10 +41,10 @@
#define LORA_IO2 LMIC_UNUSED_PIN
// Pins for I2C interface of OLED Display
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // U8X8_SSD1306_128X32_UNIVISION_SW_I2C //
#define HAS_DISPLAY 1
//#define DISPLAY_FLIP 1 // uncomment this for rotated display
#define MY_OLED_SDA (23)
#define MY_OLED_SCL (22)
#define MY_OLED_RST U8X8_PIN_NONE
#define MY_OLED_RST NOT_A_PIN
#endif
src/hal/ttgobeam.h
+2 -2
View File
@@ -33,10 +33,10 @@
#define BME680_ADDR BME680_I2C_ADDR_PRIMARY // !! connect SDIO of BME680 to GND !!
// display (if connected)
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
#define HAS_DISPLAY 1
#define MY_OLED_SDA SDA
#define MY_OLED_SCL SCL
#define MY_OLED_RST U8X8_PIN_NONE
#define MY_OLED_RST NOT_A_PIN
//#define DISPLAY_FLIP 1 // use if display is rotated
// user defined sensors (if connected)
src/hal/ttgobeam10.h
+2 -2
View File
@@ -20,10 +20,10 @@ User, long press -> send LORA message
Reset -> reset device
*/
//#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
#define HAS_DISPLAY 1
#define MY_OLED_SDA SDA
#define MY_OLED_SCL SCL
#define MY_OLED_RST U8X8_PIN_NONE
#define MY_OLED_RST NOT_A_PIN
//#define DISPLAY_FLIP 1 // use if display is rotated
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
src/hal/ttgofox.h
+2 -2
View File
@@ -10,7 +10,7 @@
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
#define CFG_sx1276_radio 1 // HPD13A LoRa SoC
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
#define HAS_DISPLAY 1
#define HAS_LED NOT_A_PIN // green on board LED is useless, is GPIO25, which switches power for Lora+Display
#define EXT_POWER_SW GPIO_NUM_25 // switches power for LoRa chip
@@ -23,7 +23,7 @@
// Pins for I2C interface of OLED Display
#define MY_OLED_SDA (21)
#define MY_OLED_SCL (22)
#define MY_OLED_RST U8X8_PIN_NONE
#define MY_OLED_RST NOT_A_PIN
// Settings for on board DS3231 RTC chip
#define HAS_RTC MY_OLED_SDA, MY_OLED_SCL // SDA, SCL
src/hal/ttgov1.h
+1 -1
View File
@@ -12,7 +12,7 @@
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
#define CFG_sx1276_radio 1
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // OLED-Display on board
#define HAS_DISPLAY 1 // OLED-Display on board
//#define DISPLAY_FLIP 1 // uncomment this for rotated display
#define HAS_LED LED_BUILTIN
#define LED_ACTIVE_LOW 1 // Onboard LED is active when pin is LOW
src/hal/ttgov2.h
+2 -2
View File
@@ -12,7 +12,7 @@
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
#define CFG_sx1276_radio 1 // HPD13A LoRa SoC
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
#define HAS_DISPLAY 1
//#define DISPLAY_FLIP 1 // uncomment this for rotated display
#define HAS_LED NOT_A_PIN // on-board LED is wired to SCL (used by display) therefore totally useless
@@ -22,7 +22,7 @@
// Pins for I2C interface of OLED Display
#define MY_OLED_SDA (21)
#define MY_OLED_SCL (22)
#define MY_OLED_RST U8X8_PIN_NONE
#define MY_OLED_RST NOT_A_PIN
// Pins for LORA chip SPI interface come from board file, we need some
// additional definitions for LMIC
src/hal/ttgov21new.h
+2 -2
View File
@@ -20,7 +20,7 @@
//#define HAS_BME 1 // Enable BME sensors in general
//#define HAS_BME280 GPIO_NUM_21, GPIO_NUM_22 // SDA, SCL
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
#define HAS_DISPLAY 1
#define HAS_LED (25) // green on board LED
#define BAT_MEASURE_ADC ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
#define BAT_VOLTAGE_DIVIDER 2 // voltage divider 100k/100k on board
@@ -28,7 +28,7 @@
// Pins for I2C interface of OLED Display
#define MY_OLED_SDA (21)
#define MY_OLED_SCL (22)
#define MY_OLED_RST U8X8_PIN_NONE
#define MY_OLED_RST NOT_A_PIN
// Pins for LORA chip SPI interface, reset line and interrupt lines
#define LORA_SCK (5)
src/hal/ttgov21old.h
+2 -2
View File
@@ -19,7 +19,7 @@
#define HAS_LED NOT_A_PIN // no usable LED on board
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
#define HAS_DISPLAY 1
//#define DISPLAY_FLIP 1 // rotated display
//#define BAT_MEASURE_ADC ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
//#define BAT_VOLTAGE_DIVIDER 2 // voltage divider 100k/100k on board
@@ -27,7 +27,7 @@
// Pins for I2C interface of OLED Display
#define MY_OLED_SDA (21)
#define MY_OLED_SCL (22)
#define MY_OLED_RST U8X8_PIN_NONE
#define MY_OLED_RST NOT_A_PIN
// Pins for LORA chip SPI interface, reset line and interrupt lines
#define LORA_SCK (5)
src/hal/wemos32oled.h
+2 -2
View File
@@ -9,10 +9,10 @@
#define HAS_LED NOT_A_PIN // no LED
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C
#define HAS_DISPLAY 1
#define MY_OLED_SDA (5)
#define MY_OLED_SCL (4)
#define MY_OLED_RST U8X8_PIN_NONE
#define MY_OLED_RST NOT_A_PIN
#define DISPLAY_FLIP 1 // use if display is rotated
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature