clang-format adcread.cpp, antenna.cpp, blescan.cpp
This commit is contained in:
Klaus K Wilting
parent
a47cf1517a
commit
0cbfb1c354
@ -5,52 +5,56 @@
|
||||
#include <driver/adc.h>
|
||||
#include <esp_adc_cal.h>
|
||||
|
||||
#define DEFAULT_VREF 1100 // to be done: use adc2_vref_to_gpio() to obtain a better estimate
|
||||
#define NO_OF_SAMPLES 64 // we do multisampling
|
||||
#define DEFAULT_VREF 1100 // tbd: use adc2_vref_to_gpio() for better estimate
|
||||
#define NO_OF_SAMPLES 64 // we do multisampling
|
||||
|
||||
// Local logging tag
|
||||
static const char TAG[] = "main";
|
||||
|
||||
static void print_char_val_type(esp_adc_cal_value_t val_type)
|
||||
{
|
||||
if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP) {
|
||||
ESP_LOGI(TAG,"ADC characterization based on Two Point values stored in eFuse");
|
||||
} else if (val_type == ESP_ADC_CAL_VAL_EFUSE_VREF) {
|
||||
ESP_LOGI(TAG,"ADC characterization based on reference voltage stored in eFuse");
|
||||
} else {
|
||||
ESP_LOGI(TAG,"ADC characterization based on default reference voltage");
|
||||
}
|
||||
static void print_char_val_type(esp_adc_cal_value_t val_type) {
|
||||
if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP) {
|
||||
ESP_LOGI(TAG,
|
||||
"ADC characterization based on Two Point values stored in eFuse");
|
||||
} else if (val_type == ESP_ADC_CAL_VAL_EFUSE_VREF) {
|
||||
ESP_LOGI(TAG,
|
||||
"ADC characterization based on reference voltage stored in eFuse");
|
||||
} else {
|
||||
ESP_LOGI(TAG, "ADC characterization based on default reference voltage");
|
||||
}
|
||||
}
|
||||
|
||||
uint16_t read_voltage(void)
|
||||
{
|
||||
static const adc1_channel_t channel = HAS_BATTERY_PROBE;
|
||||
static const adc_atten_t atten = ADC_ATTEN_DB_11;
|
||||
static const adc_unit_t unit = ADC_UNIT_1;
|
||||
uint16_t read_voltage(void) {
|
||||
static const adc1_channel_t channel = HAS_BATTERY_PROBE;
|
||||
static const adc_atten_t atten = ADC_ATTEN_DB_11;
|
||||
static const adc_unit_t unit = ADC_UNIT_1;
|
||||
|
||||
//configure ADC1
|
||||
ESP_ERROR_CHECK(adc1_config_width(ADC_WIDTH_BIT_12));
|
||||
ESP_ERROR_CHECK(adc1_config_channel_atten(channel, atten));
|
||||
// configure ADC1
|
||||
ESP_ERROR_CHECK(adc1_config_width(ADC_WIDTH_BIT_12));
|
||||
ESP_ERROR_CHECK(adc1_config_channel_atten(channel, atten));
|
||||
|
||||
//calibrate ADC1
|
||||
esp_adc_cal_characteristics_t *adc_chars = (esp_adc_cal_characteristics_t *) calloc(1, sizeof(esp_adc_cal_characteristics_t));
|
||||
esp_adc_cal_value_t val_type = esp_adc_cal_characterize(unit, atten, ADC_WIDTH_BIT_12, DEFAULT_VREF, adc_chars);
|
||||
print_char_val_type(val_type);
|
||||
// calibrate ADC1
|
||||
esp_adc_cal_characteristics_t *adc_chars =
|
||||
(esp_adc_cal_characteristics_t *)calloc(
|
||||
1, sizeof(esp_adc_cal_characteristics_t));
|
||||
esp_adc_cal_value_t val_type = esp_adc_cal_characterize(
|
||||
unit, atten, ADC_WIDTH_BIT_12, DEFAULT_VREF, adc_chars);
|
||||
print_char_val_type(val_type);
|
||||
|
||||
//multisample ADC1
|
||||
uint32_t adc_reading = 0;
|
||||
for (int i = 0; i < NO_OF_SAMPLES; i++) {
|
||||
adc_reading += adc1_get_raw(channel);
|
||||
}
|
||||
// multisample ADC1
|
||||
uint32_t adc_reading = 0;
|
||||
for (int i = 0; i < NO_OF_SAMPLES; i++) {
|
||||
adc_reading += adc1_get_raw(channel);
|
||||
}
|
||||
|
||||
adc_reading /= NO_OF_SAMPLES;
|
||||
adc_reading /= NO_OF_SAMPLES;
|
||||
|
||||
//Convert adc_reading to voltage in mV
|
||||
uint16_t voltage = (uint16_t) esp_adc_cal_raw_to_voltage(adc_reading, adc_chars);
|
||||
#ifdef BATT_FACTOR
|
||||
voltage *= BATT_FACTOR;
|
||||
#endif
|
||||
ESP_LOGI(TAG,"Raw: %d / Voltage: %dmV", adc_reading, voltage);
|
||||
return voltage;
|
||||
// Convert adc_reading to voltage in mV
|
||||
uint16_t voltage =
|
||||
(uint16_t)esp_adc_cal_raw_to_voltage(adc_reading, adc_chars);
|
||||
#ifdef BATT_FACTOR
|
||||
voltage *= BATT_FACTOR;
|
||||
#endif
|
||||
ESP_LOGI(TAG, "Raw: %d / Voltage: %dmV", adc_reading, voltage);
|
||||
return voltage;
|
||||
}
|
||||
#endif // HAS_BATTERY_PROBE
|
||||
@ -1,4 +1,4 @@
|
||||
/* switches wifi antenna, if board has switch to select internal and external antenna */
|
||||
/* switches wifi antenna, if board has switch internal / external antenna */
|
||||
|
||||
#ifdef HAS_ANTENNA_SWITCH
|
||||
|
||||
@ -7,35 +7,32 @@
|
||||
// Local logging tag
|
||||
static const char TAG[] = "wifi";
|
||||
|
||||
typedef enum {
|
||||
ANTENNA_INT = 0,
|
||||
ANTENNA_EXT
|
||||
} antenna_type_t;
|
||||
typedef enum { ANTENNA_INT = 0, ANTENNA_EXT } antenna_type_t;
|
||||
|
||||
void antenna_init(void) {
|
||||
gpio_config_t gpioconf = {.pin_bit_mask = 1ull << HAS_ANTENNA_SWITCH,
|
||||
.mode = GPIO_MODE_OUTPUT,
|
||||
.pull_up_en = GPIO_PULLUP_DISABLE,
|
||||
.pull_down_en = GPIO_PULLDOWN_DISABLE,
|
||||
.intr_type = GPIO_INTR_DISABLE};
|
||||
gpio_config(&gpioconf);
|
||||
gpio_config_t gpioconf = {.pin_bit_mask = 1ull << HAS_ANTENNA_SWITCH,
|
||||
.mode = GPIO_MODE_OUTPUT,
|
||||
.pull_up_en = GPIO_PULLUP_DISABLE,
|
||||
.pull_down_en = GPIO_PULLDOWN_DISABLE,
|
||||
.intr_type = GPIO_INTR_DISABLE};
|
||||
gpio_config(&gpioconf);
|
||||
}
|
||||
|
||||
void antenna_select (const uint8_t _ant) {
|
||||
if (HAS_ANTENNA_SWITCH < 32) {
|
||||
if (_ant == ANTENNA_EXT) {
|
||||
GPIO_REG_WRITE(GPIO_OUT_W1TS_REG, 1 << HAS_ANTENNA_SWITCH);
|
||||
} else {
|
||||
GPIO_REG_WRITE(GPIO_OUT_W1TC_REG, 1 << HAS_ANTENNA_SWITCH);
|
||||
}
|
||||
} else {
|
||||
if (_ant == ANTENNA_EXT) {
|
||||
GPIO_REG_WRITE(GPIO_OUT1_W1TS_REG, 1 << (HAS_ANTENNA_SWITCH & 31));
|
||||
} else {
|
||||
GPIO_REG_WRITE(GPIO_OUT1_W1TC_REG, 1 << (HAS_ANTENNA_SWITCH & 31));
|
||||
}
|
||||
}
|
||||
ESP_LOGI(TAG, "Wifi Antenna switched to %s", _ant ? "external" : "internal");
|
||||
void antenna_select(const uint8_t _ant) {
|
||||
if (HAS_ANTENNA_SWITCH < 32) {
|
||||
if (_ant == ANTENNA_EXT) {
|
||||
GPIO_REG_WRITE(GPIO_OUT_W1TS_REG, 1 << HAS_ANTENNA_SWITCH);
|
||||
} else {
|
||||
GPIO_REG_WRITE(GPIO_OUT_W1TC_REG, 1 << HAS_ANTENNA_SWITCH);
|
||||
}
|
||||
} else {
|
||||
if (_ant == ANTENNA_EXT) {
|
||||
GPIO_REG_WRITE(GPIO_OUT1_W1TS_REG, 1 << (HAS_ANTENNA_SWITCH & 31));
|
||||
} else {
|
||||
GPIO_REG_WRITE(GPIO_OUT1_W1TC_REG, 1 << (HAS_ANTENNA_SWITCH & 31));
|
||||
}
|
||||
}
|
||||
ESP_LOGI(TAG, "Wifi Antenna switched to %s", _ant ? "external" : "internal");
|
||||
}
|
||||
|
||||
#endif
|
||||
392
src/blecsan.cpp
392
src/blecsan.cpp
@ -14,7 +14,8 @@ https://github.com/nkolban/esp32-snippets/tree/master/BLE/scanner
|
||||
#include <esp_blufi_api.h> // needed for BLE_ADDR types, do not remove
|
||||
#include <bt_types.h>
|
||||
|
||||
#define BT_BD_ADDR_HEX(addr) addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]
|
||||
#define BT_BD_ADDR_HEX(addr) \
|
||||
addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]
|
||||
|
||||
// local Tag for logging
|
||||
static const char TAG[] = "bluetooth";
|
||||
@ -23,208 +24,257 @@ static const char TAG[] = "bluetooth";
|
||||
bool mac_add(uint8_t *paddr, int8_t rssi, bool sniff_type);
|
||||
|
||||
const char *bt_addr_t_to_string(esp_ble_addr_type_t type) {
|
||||
switch(type) {
|
||||
case BLE_ADDR_TYPE_PUBLIC:
|
||||
return "BLE_ADDR_TYPE_PUBLIC";
|
||||
case BLE_ADDR_TYPE_RANDOM:
|
||||
return "BLE_ADDR_TYPE_RANDOM";
|
||||
case BLE_ADDR_TYPE_RPA_PUBLIC:
|
||||
return "BLE_ADDR_TYPE_RPA_PUBLIC";
|
||||
case BLE_ADDR_TYPE_RPA_RANDOM:
|
||||
return "BLE_ADDR_TYPE_RPA_RANDOM";
|
||||
default:
|
||||
return "Unknown addr_t";
|
||||
}
|
||||
switch (type) {
|
||||
case BLE_ADDR_TYPE_PUBLIC:
|
||||
return "BLE_ADDR_TYPE_PUBLIC";
|
||||
case BLE_ADDR_TYPE_RANDOM:
|
||||
return "BLE_ADDR_TYPE_RANDOM";
|
||||
case BLE_ADDR_TYPE_RPA_PUBLIC:
|
||||
return "BLE_ADDR_TYPE_RPA_PUBLIC";
|
||||
case BLE_ADDR_TYPE_RPA_RANDOM:
|
||||
return "BLE_ADDR_TYPE_RPA_RANDOM";
|
||||
default:
|
||||
return "Unknown addr_t";
|
||||
}
|
||||
} // bt_addr_t_to_string
|
||||
|
||||
const char *btsig_gap_type(uint32_t gap_type) {
|
||||
switch (gap_type)
|
||||
{
|
||||
case 0x01: return "Flags";
|
||||
case 0x02: return "Incomplete List of 16-bit Service Class UUIDs";
|
||||
case 0x03: return "Complete List of 16-bit Service Class UUIDs";
|
||||
case 0x04: return "Incomplete List of 32-bit Service Class UUIDs";
|
||||
case 0x05: return "Complete List of 32-bit Service Class UUIDs";
|
||||
case 0x06: return "Incomplete List of 128-bit Service Class UUIDs";
|
||||
case 0x07: return "Complete List of 128-bit Service Class UUIDs";
|
||||
case 0x08: return "Shortened Local Name";
|
||||
case 0x09: return "Complete Local Name";
|
||||
case 0x0A: return "Tx Power Level";
|
||||
case 0x0D: return "Class of Device";
|
||||
case 0x0E: return "Simple Pairing Hash C/C-192";
|
||||
case 0x0F: return "Simple Pairing Randomizer R/R-192";
|
||||
case 0x10: return "Device ID/Security Manager TK Value";
|
||||
case 0x11: return "Security Manager Out of Band Flags";
|
||||
case 0x12: return "Slave Connection Interval Range";
|
||||
case 0x14: return "List of 16-bit Service Solicitation UUIDs";
|
||||
case 0x1F: return "List of 32-bit Service Solicitation UUIDs";
|
||||
case 0x15: return "List of 128-bit Service Solicitation UUIDs";
|
||||
case 0x16: return "Service Data - 16-bit UUID";
|
||||
case 0x20: return "Service Data - 32-bit UUID";
|
||||
case 0x21: return "Service Data - 128-bit UUID";
|
||||
case 0x22: return "LE Secure Connections Confirmation Value";
|
||||
case 0x23: return "LE Secure Connections Random Value";
|
||||
case 0x24: return "URI";
|
||||
case 0x25: return "Indoor Positioning";
|
||||
case 0x26: return "Transport Discovery Data";
|
||||
case 0x17: return "Public Target Address";
|
||||
case 0x18: return "Random Target Address";
|
||||
case 0x19: return "Appearance";
|
||||
case 0x1A: return "Advertising Interval";
|
||||
case 0x1B: return "LE Bluetooth Device Address";
|
||||
case 0x1C: return "LE Role";
|
||||
case 0x1D: return "Simple Pairing Hash C-256";
|
||||
case 0x1E: return "Simple Pairing Randomizer R-256";
|
||||
case 0x3D: return "3D Information Data";
|
||||
case 0xFF: return "Manufacturer Specific Data";
|
||||
switch (gap_type) {
|
||||
case 0x01:
|
||||
return "Flags";
|
||||
case 0x02:
|
||||
return "Incomplete List of 16-bit Service Class UUIDs";
|
||||
case 0x03:
|
||||
return "Complete List of 16-bit Service Class UUIDs";
|
||||
case 0x04:
|
||||
return "Incomplete List of 32-bit Service Class UUIDs";
|
||||
case 0x05:
|
||||
return "Complete List of 32-bit Service Class UUIDs";
|
||||
case 0x06:
|
||||
return "Incomplete List of 128-bit Service Class UUIDs";
|
||||
case 0x07:
|
||||
return "Complete List of 128-bit Service Class UUIDs";
|
||||
case 0x08:
|
||||
return "Shortened Local Name";
|
||||
case 0x09:
|
||||
return "Complete Local Name";
|
||||
case 0x0A:
|
||||
return "Tx Power Level";
|
||||
case 0x0D:
|
||||
return "Class of Device";
|
||||
case 0x0E:
|
||||
return "Simple Pairing Hash C/C-192";
|
||||
case 0x0F:
|
||||
return "Simple Pairing Randomizer R/R-192";
|
||||
case 0x10:
|
||||
return "Device ID/Security Manager TK Value";
|
||||
case 0x11:
|
||||
return "Security Manager Out of Band Flags";
|
||||
case 0x12:
|
||||
return "Slave Connection Interval Range";
|
||||
case 0x14:
|
||||
return "List of 16-bit Service Solicitation UUIDs";
|
||||
case 0x1F:
|
||||
return "List of 32-bit Service Solicitation UUIDs";
|
||||
case 0x15:
|
||||
return "List of 128-bit Service Solicitation UUIDs";
|
||||
case 0x16:
|
||||
return "Service Data - 16-bit UUID";
|
||||
case 0x20:
|
||||
return "Service Data - 32-bit UUID";
|
||||
case 0x21:
|
||||
return "Service Data - 128-bit UUID";
|
||||
case 0x22:
|
||||
return "LE Secure Connections Confirmation Value";
|
||||
case 0x23:
|
||||
return "LE Secure Connections Random Value";
|
||||
case 0x24:
|
||||
return "URI";
|
||||
case 0x25:
|
||||
return "Indoor Positioning";
|
||||
case 0x26:
|
||||
return "Transport Discovery Data";
|
||||
case 0x17:
|
||||
return "Public Target Address";
|
||||
case 0x18:
|
||||
return "Random Target Address";
|
||||
case 0x19:
|
||||
return "Appearance";
|
||||
case 0x1A:
|
||||
return "Advertising Interval";
|
||||
case 0x1B:
|
||||
return "LE Bluetooth Device Address";
|
||||
case 0x1C:
|
||||
return "LE Role";
|
||||
case 0x1D:
|
||||
return "Simple Pairing Hash C-256";
|
||||
case 0x1E:
|
||||
return "Simple Pairing Randomizer R-256";
|
||||
case 0x3D:
|
||||
return "3D Information Data";
|
||||
case 0xFF:
|
||||
return "Manufacturer Specific Data";
|
||||
|
||||
default:
|
||||
return "Unknown type";
|
||||
}
|
||||
default:
|
||||
return "Unknown type";
|
||||
}
|
||||
} // btsig_gap_type
|
||||
|
||||
// using IRAM_:ATTR here to speed up callback function
|
||||
IRAM_ATTR void gap_callback_handler(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param_t *param)
|
||||
{
|
||||
esp_ble_gap_cb_param_t *p = (esp_ble_gap_cb_param_t *)param;
|
||||
IRAM_ATTR void gap_callback_handler(esp_gap_ble_cb_event_t event,
|
||||
esp_ble_gap_cb_param_t *param) {
|
||||
esp_ble_gap_cb_param_t *p = (esp_ble_gap_cb_param_t *)param;
|
||||
|
||||
ESP_LOGD(TAG, "BT payload rcvd -> type: 0x%.2x -> %s", *p->scan_rst.ble_adv, btsig_gap_type(*p->scan_rst.ble_adv));
|
||||
ESP_LOGD(TAG, "BT payload rcvd -> type: 0x%.2x -> %s", *p->scan_rst.ble_adv,
|
||||
btsig_gap_type(*p->scan_rst.ble_adv));
|
||||
|
||||
switch (event)
|
||||
{
|
||||
case ESP_GAP_BLE_SCAN_PARAM_SET_COMPLETE_EVT:
|
||||
// restart scan
|
||||
ESP_ERROR_CHECK(esp_ble_gap_start_scanning(BLESCANTIME));
|
||||
break;
|
||||
switch (event) {
|
||||
case ESP_GAP_BLE_SCAN_PARAM_SET_COMPLETE_EVT:
|
||||
// restart scan
|
||||
ESP_ERROR_CHECK(esp_ble_gap_start_scanning(BLESCANTIME));
|
||||
break;
|
||||
|
||||
case ESP_GAP_BLE_SCAN_RESULT_EVT:
|
||||
// evaluate scan results
|
||||
if ( p->scan_rst.search_evt == ESP_GAP_SEARCH_INQ_CMPL_EVT) // Inquiry complete, scan is done
|
||||
{ // restart scan
|
||||
ESP_ERROR_CHECK(esp_ble_gap_start_scanning(BLESCANTIME));
|
||||
return;
|
||||
}
|
||||
case ESP_GAP_BLE_SCAN_RESULT_EVT:
|
||||
// evaluate scan results
|
||||
if (p->scan_rst.search_evt ==
|
||||
ESP_GAP_SEARCH_INQ_CMPL_EVT) // Inquiry complete, scan is done
|
||||
{ // restart scan
|
||||
ESP_ERROR_CHECK(esp_ble_gap_start_scanning(BLESCANTIME));
|
||||
return;
|
||||
}
|
||||
|
||||
if (p->scan_rst.search_evt == ESP_GAP_SEARCH_INQ_RES_EVT) // Inquiry result for a peer device
|
||||
{ // evaluate sniffed packet
|
||||
ESP_LOGD(TAG, "Device address (bda): %02x:%02x:%02x:%02x:%02x:%02x", BT_BD_ADDR_HEX(p->scan_rst.bda));
|
||||
ESP_LOGD(TAG, "Addr_type : %s", bt_addr_t_to_string(p->scan_rst.ble_addr_type));
|
||||
ESP_LOGD(TAG, "RSSI : %d", p->scan_rst.rssi);
|
||||
if (p->scan_rst.search_evt ==
|
||||
ESP_GAP_SEARCH_INQ_RES_EVT) // Inquiry result for a peer device
|
||||
{ // evaluate sniffed packet
|
||||
ESP_LOGD(TAG, "Device address (bda): %02x:%02x:%02x:%02x:%02x:%02x",
|
||||
BT_BD_ADDR_HEX(p->scan_rst.bda));
|
||||
ESP_LOGD(TAG, "Addr_type : %s",
|
||||
bt_addr_t_to_string(p->scan_rst.ble_addr_type));
|
||||
ESP_LOGD(TAG, "RSSI : %d", p->scan_rst.rssi);
|
||||
|
||||
if ((cfg.rssilimit) && (p->scan_rst.rssi < cfg.rssilimit )) { // rssi is negative value
|
||||
ESP_LOGI(TAG, "BLTH RSSI %d -> ignoring (limit: %d)", p->scan_rst.rssi, cfg.rssilimit);
|
||||
break;
|
||||
}
|
||||
|
||||
#ifdef VENDORFILTER
|
||||
|
||||
if ((p->scan_rst.ble_addr_type == BLE_ADDR_TYPE_RANDOM) || (p->scan_rst.ble_addr_type == BLE_ADDR_TYPE_RPA_RANDOM)) {
|
||||
ESP_LOGD(TAG, "BT device filtered");
|
||||
break;
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
// add this device and show new count total if it was not previously added
|
||||
mac_add((uint8_t *) p->scan_rst.bda, p->scan_rst.rssi, MAC_SNIFF_BLE);
|
||||
|
||||
/* to be improved in vendorfilter if:
|
||||
|
||||
// you can search for elements in the payload using the
|
||||
// function esp_ble_resolve_adv_data()
|
||||
//
|
||||
// Like this, that scans for the "Complete name" (looking inside the payload buffer)
|
||||
// uint8_t len;
|
||||
// uint8_t *data = esp_ble_resolve_adv_data(p->scan_rst.ble_adv, ESP_BLE_AD_TYPE_NAME_CMPL, &len);
|
||||
|
||||
filter BLE devices using their advertisements to get filter alternative to vendor OUI
|
||||
if vendorfiltering is on, we ...
|
||||
- want to count: mobile phones and tablets
|
||||
- don't want to count: beacons, peripherals (earphones, headsets, printers), cars and machines
|
||||
see
|
||||
https://github.com/nkolban/ESP32_BLE_Arduino/blob/master/src/BLEAdvertisedDevice.cpp
|
||||
|
||||
http://www.libelium.com/products/meshlium/smartphone-detection/
|
||||
|
||||
https://www.question-defense.com/2013/01/12/bluetooth-cod-bluetooth-class-of-deviceclass-of-service-explained
|
||||
|
||||
https://www.bluetooth.com/specifications/assigned-numbers/baseband
|
||||
|
||||
"The Class of Device (CoD) in case of Bluetooth which allows us to differentiate the type of
|
||||
device (smartphone, handsfree, computer, LAN/network AP). With this parameter we can
|
||||
differentiate among pedestrians and vehicles."
|
||||
|
||||
*/
|
||||
|
||||
} // evaluate sniffed packet
|
||||
break;
|
||||
|
||||
default:
|
||||
if ((cfg.rssilimit) &&
|
||||
(p->scan_rst.rssi < cfg.rssilimit)) { // rssi is negative value
|
||||
ESP_LOGI(TAG, "BLTH RSSI %d -> ignoring (limit: %d)", p->scan_rst.rssi,
|
||||
cfg.rssilimit);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef VENDORFILTER
|
||||
|
||||
if ((p->scan_rst.ble_addr_type == BLE_ADDR_TYPE_RANDOM) ||
|
||||
(p->scan_rst.ble_addr_type == BLE_ADDR_TYPE_RPA_RANDOM)) {
|
||||
ESP_LOGD(TAG, "BT device filtered");
|
||||
break;
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
// add this device and show new count total if it was not previously added
|
||||
mac_add((uint8_t *)p->scan_rst.bda, p->scan_rst.rssi, MAC_SNIFF_BLE);
|
||||
|
||||
/* to be improved in vendorfilter if:
|
||||
|
||||
|
||||
// you can search for elements in the payload using the
|
||||
// function esp_ble_resolve_adv_data()
|
||||
//
|
||||
// Like this, that scans for the "Complete name" (looking inside the
|
||||
payload buffer)
|
||||
// uint8_t len;
|
||||
// uint8_t *data = esp_ble_resolve_adv_data(p->scan_rst.ble_adv,
|
||||
ESP_BLE_AD_TYPE_NAME_CMPL, &len);
|
||||
|
||||
filter BLE devices using their advertisements to get filter alternative to
|
||||
vendor OUI if vendorfiltering is on, we ...
|
||||
- want to count: mobile phones and tablets
|
||||
- don't want to count: beacons, peripherals (earphones, headsets,
|
||||
printers), cars and machines see
|
||||
https://github.com/nkolban/ESP32_BLE_Arduino/blob/master/src/BLEAdvertisedDevice.cpp
|
||||
|
||||
http://www.libelium.com/products/meshlium/smartphone-detection/
|
||||
|
||||
https://www.question-defense.com/2013/01/12/bluetooth-cod-bluetooth-class-of-deviceclass-of-service-explained
|
||||
|
||||
https://www.bluetooth.com/specifications/assigned-numbers/baseband
|
||||
|
||||
"The Class of Device (CoD) in case of Bluetooth which allows us to
|
||||
differentiate the type of device (smartphone, handsfree, computer,
|
||||
LAN/network AP). With this parameter we can differentiate among
|
||||
pedestrians and vehicles."
|
||||
|
||||
*/
|
||||
|
||||
} // evaluate sniffed packet
|
||||
break;
|
||||
|
||||
default:
|
||||
break;
|
||||
}
|
||||
} // gap_callback_handler
|
||||
|
||||
|
||||
esp_err_t register_ble_callback(void) {
|
||||
ESP_LOGI(TAG, "Register GAP callback");
|
||||
ESP_LOGI(TAG, "Register GAP callback");
|
||||
|
||||
// This function is called to occur gap event, such as scan result.
|
||||
//register the scan callback function to the gap module
|
||||
ESP_ERROR_CHECK(esp_ble_gap_register_callback(&gap_callback_handler));
|
||||
// This function is called to occur gap event, such as scan result.
|
||||
// register the scan callback function to the gap module
|
||||
ESP_ERROR_CHECK(esp_ble_gap_register_callback(&gap_callback_handler));
|
||||
|
||||
static esp_ble_scan_params_t ble_scan_params =
|
||||
{
|
||||
.scan_type = BLE_SCAN_TYPE_PASSIVE,
|
||||
.own_addr_type = BLE_ADDR_TYPE_RANDOM,
|
||||
static esp_ble_scan_params_t ble_scan_params = {
|
||||
.scan_type = BLE_SCAN_TYPE_PASSIVE,
|
||||
.own_addr_type = BLE_ADDR_TYPE_RANDOM,
|
||||
|
||||
#ifdef VENDORFILTER
|
||||
.scan_filter_policy = BLE_SCAN_FILTER_ALLOW_WLIST_PRA_DIR,
|
||||
// ADV_IND, ADV_NONCONN_IND, ADV_SCAN_IND packets are used for broadcasting
|
||||
// data in broadcast applications (e.g., Beacons), so we don't want them in vendorfilter mode
|
||||
#else
|
||||
.scan_filter_policy = BLE_SCAN_FILTER_ALLOW_ALL,
|
||||
#endif
|
||||
#ifdef VENDORFILTER
|
||||
.scan_filter_policy = BLE_SCAN_FILTER_ALLOW_WLIST_PRA_DIR,
|
||||
// ADV_IND, ADV_NONCONN_IND, ADV_SCAN_IND packets are used for broadcasting
|
||||
// data in broadcast applications (e.g., Beacons), so we don't want them in
|
||||
// vendorfilter mode
|
||||
#else
|
||||
.scan_filter_policy = BLE_SCAN_FILTER_ALLOW_ALL,
|
||||
#endif
|
||||
|
||||
.scan_interval = (uint16_t) (cfg.blescantime * 10 / 0.625), // Time = N * 0.625 msec
|
||||
.scan_window = (uint16_t) (BLESCANWINDOW / 0.625) // Time = N * 0.625 msec
|
||||
};
|
||||
.scan_interval =
|
||||
(uint16_t)(cfg.blescantime * 10 / 0.625), // Time = N * 0.625 msec
|
||||
.scan_window = (uint16_t)(BLESCANWINDOW / 0.625) // Time = N * 0.625 msec
|
||||
};
|
||||
|
||||
ESP_LOGI(TAG, "Set GAP scan parameters");
|
||||
ESP_LOGI(TAG, "Set GAP scan parameters");
|
||||
|
||||
// This function is called to set scan parameters.
|
||||
ESP_ERROR_CHECK(esp_ble_gap_set_scan_params(&ble_scan_params));
|
||||
// This function is called to set scan parameters.
|
||||
ESP_ERROR_CHECK(esp_ble_gap_set_scan_params(&ble_scan_params));
|
||||
|
||||
return ESP_OK;
|
||||
return ESP_OK;
|
||||
|
||||
} // register_ble_callback
|
||||
|
||||
void start_BLEscan(void){
|
||||
ESP_LOGI(TAG, "Initializing bluetooth scanner ...");
|
||||
void start_BLEscan(void) {
|
||||
ESP_LOGI(TAG, "Initializing bluetooth scanner ...");
|
||||
|
||||
// Initialize BT controller to allocate task and other resource.
|
||||
esp_bt_controller_config_t bt_cfg = BT_CONTROLLER_INIT_CONFIG_DEFAULT();
|
||||
bt_cfg.controller_task_stack_size = BLESTACKSIZE; // set BT stack size to value configured in paxcounter.conf
|
||||
ESP_ERROR_CHECK(esp_bt_controller_init(&bt_cfg));
|
||||
ESP_ERROR_CHECK(esp_bt_controller_enable(ESP_BT_MODE_BTDM));
|
||||
// Initialize BT controller to allocate task and other resource.
|
||||
esp_bt_controller_config_t bt_cfg = BT_CONTROLLER_INIT_CONFIG_DEFAULT();
|
||||
bt_cfg.controller_task_stack_size =
|
||||
BLESTACKSIZE; // set BT stack size to value configured in paxcounter.conf
|
||||
ESP_ERROR_CHECK(esp_bt_controller_init(&bt_cfg));
|
||||
ESP_ERROR_CHECK(esp_bt_controller_enable(ESP_BT_MODE_BTDM));
|
||||
|
||||
// Init and alloc the resource for bluetooth stack, must be done prior to every bluetooth stuff
|
||||
ESP_ERROR_CHECK(esp_bluedroid_init());
|
||||
ESP_ERROR_CHECK(esp_bluedroid_enable());
|
||||
// Init and alloc the resource for bluetooth stack, must be done prior to
|
||||
// every bluetooth stuff
|
||||
ESP_ERROR_CHECK(esp_bluedroid_init());
|
||||
ESP_ERROR_CHECK(esp_bluedroid_enable());
|
||||
|
||||
// Register callback function for capturing bluetooth packets
|
||||
ESP_ERROR_CHECK(register_ble_callback());
|
||||
// Register callback function for capturing bluetooth packets
|
||||
ESP_ERROR_CHECK(register_ble_callback());
|
||||
|
||||
ESP_LOGI(TAG, "Bluetooth scanner started");
|
||||
ESP_LOGI(TAG, "Bluetooth scanner started");
|
||||
} // start_BLEscan
|
||||
|
||||
void stop_BLEscan(void){
|
||||
ESP_LOGI(TAG, "Shutting down bluetooth scanner ...");
|
||||
ESP_ERROR_CHECK(esp_ble_gap_register_callback(NULL));
|
||||
ESP_ERROR_CHECK(esp_bluedroid_disable());
|
||||
ESP_ERROR_CHECK(esp_bluedroid_deinit());
|
||||
ESP_ERROR_CHECK(esp_bt_controller_disable());
|
||||
ESP_ERROR_CHECK(esp_bt_controller_deinit());
|
||||
ESP_LOGI(TAG, "Bluetooth scanner stopped");
|
||||
void stop_BLEscan(void) {
|
||||
ESP_LOGI(TAG, "Shutting down bluetooth scanner ...");
|
||||
ESP_ERROR_CHECK(esp_ble_gap_register_callback(NULL));
|
||||
ESP_ERROR_CHECK(esp_bluedroid_disable());
|
||||
ESP_ERROR_CHECK(esp_bluedroid_deinit());
|
||||
ESP_ERROR_CHECK(esp_bt_controller_disable());
|
||||
ESP_ERROR_CHECK(esp_bt_controller_deinit());
|
||||
ESP_LOGI(TAG, "Bluetooth scanner stopped");
|
||||
} // stop_BLEscan
|
||||
|
||||
#endif // BLECOUNTER
|
||||
Loading…
Reference in New Issue
Block a user