libpax integration 6 (trigger sendcycle)

README.md

@@ -443,7 +443,7 @@ Send for example `83` `86` as Downlink on Port 2 to get battery status and time/
 	8 = reboot device to maintenance mode (local web server)
 	9 = reboot device to OTA update via Wifi mode
 
-0x0A set LoRaWAN payload send cycle
+0x0A set payload send cycle
 
 	0 ... 255 payload send cycle in seconds/2
 	e.g. 120 -> payload is transmitted each 240 seconds [default]

include/libpax_helpers.h

@@ -1,11 +1,13 @@
 #ifndef _LIBPAX_HELPERS_H
 #define _LIBPAX_HELPERS_H
 
-#include "globals.h"
 #include <stdio.h>
 #include <libpax_api.h>
+#include "globals.h"
+#include "senddata.h"
+#include "configmanager.h"
 
-void init_libpax();
+void init_libpax(void);
 
 extern uint16_t volatile libpax_macs_ble, libpax_macs_wifi; // libpax values
 

include/senddata.h

@@ -16,7 +16,6 @@
 #endif
 
 extern struct count_payload_t count_from_libpax;
-extern Ticker sendTimer;
 
 void SendPayload(uint8_t port);
 void sendData(void);

src/libpax_helpers.cpp

@@ -12,10 +12,11 @@ void process_count(void) {
            count_from_libpax.wifi_count, count_from_libpax.ble_count);
   libpax_macs_ble = count_from_libpax.ble_count;
   libpax_macs_wifi = count_from_libpax.wifi_count;
+  setSendIRQ();
 }
 
-void init_libpax() {
-  libpax_counter_init(process_count, &count_from_libpax, SENDCYCLE * 2 * 1000,
+void init_libpax(void) {
+  libpax_counter_init(process_count, &count_from_libpax, cfg.sendcycle * 2 * 1000,
                       1);
   libpax_counter_start();
 }

src/main.cpp

@@ -65,11 +65,11 @@ MatrixDisplayIRQ-> esp32 timer 3
 ButtonIRQ       -> external GPIO
 PMUIRQ          -> PMU chip GPIO
 
-fired by software (Ticker.h)
-TIMESYNC_IRQ    -> setTimeSyncIRQ()
-CYCLIC_IRQ      -> setCyclicIRQ()
-SENDCYCLE_IRQ   -> setSendIRQ()
-BME_IRQ         -> setBMEIRQ()
+fired by software
+TIMESYNC_IRQ    -> setTimeSyncIRQ() -> Ticker.h
+CYCLIC_IRQ      -> setCyclicIRQ() -> Ticker.h
+SENDCYCLE_IRQ   -> setSendIRQ() -> xTimer
+BME_IRQ         -> setBMEIRQ() -> Ticker.h
 
 ClockTask (Core 1), see timekeeper.cpp
 
@@ -89,7 +89,7 @@ triggers pps 1 sec impulse
 // local Tag for logging
 static const char TAG[] = __FILE__;
 
-char clientId[20] = {0};                // unique ClientID
+char clientId[20] = {0}; // unique ClientID
 
 void setup() {
 
@@ -484,7 +484,6 @@ void setup() {
 #endif // HAS_BUTTON
 
   // cyclic function interrupts
-  sendTimer.attach(cfg.sendcycle * 2, setSendIRQ);
   cyclicTimer.attach(HOMECYCLE, setCyclicIRQ);
 
 // only if we have a timesource we do timesync

src/rcommand.cpp

@@ -67,9 +67,10 @@ void set_rssi(uint8_t val[]) {
 void set_sendcycle(uint8_t val[]) {
   cfg.sendcycle = val[0];
   // update send cycle interrupt [seconds / 2]
-  sendTimer.attach(cfg.sendcycle * 2, setSendIRQ);
   ESP_LOGI(TAG, "Remote command: set send cycle to %d seconds",
            cfg.sendcycle * 2);
+  libpax_counter_stop();
+  init_libpax();
 }
 
 void set_sleepcycle(uint8_t val[]) {

src/reset.cpp

@@ -102,7 +102,7 @@ void enter_deepsleep(const uint64_t wakeup_sec, gpio_num_t wakeup_gpio) {
     wakeup_gpio = GPIO_NUM_MAX;
 
   // stop further enqueuing of senddata and MAC processing
-  sendTimer.detach();
+  libpax_counter_stop();
 
   // switch off radio and other power consuming hardware
 #if (HAS_SDS011)

src/senddata.cpp

@@ -1,8 +1,6 @@
 // Basic Config
 #include "senddata.h"
 
-Ticker sendTimer;
-
 void setSendIRQ() { xTaskNotify(irqHandlerTask, SENDCYCLE_IRQ, eSetBits); }
 
 // put data to send in RTos Queues used for transmit over channels Lora and SPI