diff --git a/README.md b/README.md index 8631a383..5c222b3e 100644 --- a/README.md +++ b/README.md @@ -366,7 +366,7 @@ Hereafter described is the default *plain* format, which uses MSB bit numbering. The device listenes for remote control commands on LoRaWAN Port 2. Multiple commands per downlink are possible by concatenating them, but must not exceed a maximum of 10 bytes per downlink. -Note: all settings are stored in NVRAM and will be reloaded when device starts. +Note: settings can be stored in NVRAM to make them persistant (reloaded during device startup / restart). To store settings, use command 0x20. Send for example `8386` as Downlink on Port 2 to get battery status and time/date from the device. @@ -525,6 +525,14 @@ Send for example `8386` as Downlink on Port 2 to get battery status and time/dat 0 ... 255 device sleep cycle in seconds/2 e.g. 120 -> device sleeps 240 seconds after each send cycle [default = 0] +0x20 store device configuration + + Current device runtime configuration is stored in NVRAM, will be reloaded after restart + +0x21 load device configuration + + Current device runtime configuration will be loaded from NVRAM, replacing current settings immediately (use with care!) + 0x80 get device configuration Device answers with it's current configuration on Port 3. diff --git a/src/gpsread.cpp b/src/gpsread.cpp index 00e3c90a..3b764b55 100644 --- a/src/gpsread.cpp +++ b/src/gpsread.cpp @@ -109,7 +109,7 @@ time_t get_gpstime(uint16_t *msec) { #endif // did we get a current date & time? - if (gpstime.isValid() && gpsday.isValid()) { + if (gpstime.isValid()) { time_t t = 0; tmElements_t tm; @@ -188,4 +188,4 @@ void gps_loop(void *pvParameters) { } // gps_loop() -#endif // HAS_GPS \ No newline at end of file +#endif // HAS_GPS diff --git a/src/rcommand.cpp b/src/rcommand.cpp index cebc1c3e..1f36b113 100644 --- a/src/rcommand.cpp +++ b/src/rcommand.cpp @@ -369,28 +369,37 @@ void set_enscount(uint8_t val[]) { cfg.payloadmask &= ~SENSOR1_DATA; } +void set_loadconfig(uint8_t val[]) { + ESP_LOGI(TAG, "Remote command: load config from NVRAM"); + loadConfig(); +}; + +void set_saveconfig(uint8_t val[]) { + ESP_LOGI(TAG, "Remote command: save config to NVRAM"); + saveConfig(false); +}; + // assign previously defined functions to set of numeric remote commands -// format: opcode, function, #bytes params, -// flag (true = do make settings persistent / false = don't) -// +// format: {opcode, function, number of function arguments} static const cmd_t table[] = { - {0x01, set_rssi, 1, true}, {0x02, set_countmode, 1, true}, - {0x03, set_gps, 1, true}, {0x04, set_display, 1, true}, - {0x05, set_loradr, 1, true}, {0x06, set_lorapower, 1, true}, - {0x07, set_loraadr, 1, true}, {0x08, set_screensaver, 1, true}, - {0x09, set_reset, 1, false}, {0x0a, set_sendcycle, 1, true}, - {0x0b, set_wifichancycle, 1, true}, {0x0c, set_blescantime, 1, true}, - {0x0d, set_macfilter, 1, false}, {0x0e, set_blescan, 1, true}, - {0x0f, set_wifiant, 1, true}, {0x10, set_rgblum, 1, true}, - {0x11, set_monitor, 1, true}, {0x12, set_beacon, 7, false}, - {0x13, set_sensor, 2, true}, {0x14, set_payloadmask, 1, true}, - {0x15, set_bme, 1, true}, {0x16, set_batt, 1, true}, - {0x17, set_wifiscan, 1, true}, {0x18, set_enscount, 1, true}, - {0x19, set_sleepcycle, 1, true}, {0x80, get_config, 0, false}, - {0x81, get_status, 0, false}, {0x83, get_batt, 0, false}, - {0x84, get_gps, 0, false}, {0x85, get_bme, 0, false}, - {0x86, get_time, 0, false}, {0x87, set_time, 0, false}, - {0x99, set_flush, 0, false}}; + {0x01, set_rssi, 1}, {0x02, set_countmode, 1}, + {0x03, set_gps, 1}, {0x04, set_display, 1}, + {0x05, set_loradr, 1}, {0x06, set_lorapower, 1}, + {0x07, set_loraadr, 1}, {0x08, set_screensaver, 1}, + {0x09, set_reset, 1}, {0x0a, set_sendcycle, 1}, + {0x0b, set_wifichancycle, 1}, {0x0c, set_blescantime, 1}, + {0x0d, set_macfilter, 1}, {0x0e, set_blescan, 1}, + {0x0f, set_wifiant, 1}, {0x10, set_rgblum, 1}, + {0x11, set_monitor, 1}, {0x12, set_beacon, 7}, + {0x13, set_sensor, 2}, {0x14, set_payloadmask, 1}, + {0x15, set_bme, 1}, {0x16, set_batt, 1}, + {0x17, set_wifiscan, 1}, {0x18, set_enscount, 1}, + {0x19, set_sleepcycle, 1}, {0x20, set_loadconfig, 0}, + {0x21, set_saveconfig, 0}, {0x80, get_config, 0}, + {0x81, get_status, 0}, {0x83, get_batt, 0}, + {0x84, get_gps, 0}, {0x85, get_bme, 0}, + {0x86, get_time, 0}, {0x87, set_time, 0}, + {0x99, set_flush, 0}}; static const uint8_t cmdtablesize = sizeof(table) / sizeof(table[0]); // number of commands in command table @@ -402,7 +411,6 @@ void rcmd_execute(const uint8_t cmd[], const uint8_t cmdlength) { return; uint8_t foundcmd[cmdlength], cursor = 0; - bool storeflag = false; while (cursor < cmdlength) { @@ -414,8 +422,6 @@ void rcmd_execute(const uint8_t cmd[], const uint8_t cmdlength) { memmove(foundcmd, cmd + cursor, table[i].params); // strip opcode from cmd array cursor += table[i].params; - if (table[i].store) // ceck if function needs to store configuration - storeflag = true; table[i].func( foundcmd); // execute assigned function with given parameters } else @@ -432,9 +438,6 @@ void rcmd_execute(const uint8_t cmd[], const uint8_t cmdlength) { } } // command parsing loop - if (storeflag) - saveConfig(); - } // rcmd_execute() // remote command processing task