updated readme.md and payload decoders for new test monitor function

README.md

@@ -156,7 +156,8 @@ Hereafter described is the default *plain* format, which uses MSB bit numbering.
 	byte 14:	Vendorfilter mode (0=disabled, 1=enabled) [default 0]
 	byte 15:	RGB LED luminosity (0..100 %) [default 30]
 	byte 16:	GPS send data mode (1=on, 0=ff) [default 1]
-	bytes 17-27:	Software version (ASCII format, terminating with zero)
+	byte 17:	Beacon monitor mode (1=on, 0=off) [default 0]
+	bytes 18-28:	Software version (ASCII format, terminating with zero)
 
 
 **Port #4:** GPS query result
@@ -305,6 +306,11 @@ Note: all settings are stored in NVRAM and will be reloaded when device starts.
 	0 ... 100 percentage of luminosity (100% = full light)
 	e.g. 50 -> 50% of luminosity [default]
 
+0x11 set Beacon monitor mode on/off
+
+	0 = Beacon monitor mode off [default]
+	1 = Beacon monitor mode on, enables proximity alarm if test beacons are seen
+
 0x80 get device configuration
 
 	Device answers with it's current configuration on Port 3. 

src/TTN/packed_decoder.js

@@ -31,6 +31,17 @@ function Decoder(bytes, port) {
         // gps data      
         return decode(bytes, [latLng, latLng, uint8, hdop, uint16], ['latitude', 'longitude', 'sats', 'hdop', 'altitude']);
     }
+
+    if (port === 5) {
+        // button pressed      
+        return decode(bytes, [uint8], ['button']);
+    }
+
+    if (port === 6) {
+        // beacon proximity alarm      
+        return decode(bytes, [uint8, uint8], ['rssi', 'beacon']);
+    }
+
 }
 
 

src/TTN/plain_decoder.js

@@ -19,5 +19,25 @@ function Decoder(bytes, port) {
     }
   }
 
-  return decoded;
+  if (port === 2) {
+    var i = 0;
+    decoded.battery = ((bytes[i++] << 8) | bytes[i++]);
+    decoded.uptime = ((bytes[i++] << 56) | (bytes[i++] << 48) | (bytes[i++] << 40) | (bytes[i++] << 32) |
+      (bytes[i++] << 24) | (bytes[i++] << 16) | (bytes[i++] << 8) | bytes[i++]);
+    decoded.temp = ((bytes[i++] << 24) | (bytes[i++] << 16) | (bytes[i++] << 8) | bytes[i++]);
+  }
+
+  if (port === 5) {
+    var i = 0;
+    decoded.button = (bytes[i++]);
+  }
+
+  if (port === 6) {
+    var i = 0;
+    decoded.rssi = (bytes[i++]);
+    decoded.beacon = (bytes[i++]);
+  }
+
+  return decoded;
+
 }