Merge remote-tracking branch 'upstream/master'

README.md

@@ -16,15 +16,13 @@ Tutorial (in german language): https://www.heise.de/select/make/2019/1/155109923
 
 # Use case
 
-Paxcounter is a proof-of-concept device for metering passenger flows in realtime. It counts how many mobile devices are around. This gives an estimation how many people are around. Paxcounter detects Wifi and Bluetooth signals in the air, focusing on mobile devices by filtering vendor OUIs in the MAC adress.
+Paxcounter is an [ESP32](https://www.espressif.com/en/products/socs/esp32) MCU based device for metering passenger flows in realtime. It counts how many mobile devices are around. This gives an estimation how many people are around. Paxcounter detects Wifi and Bluetooth signals in the air, focusing on mobile devices by evaluating their MAC adresses.
 
 Intention of this project is to do this without intrusion in privacy: You don't need to track people owned devices, if you just want to count them. Therefore, Paxcounter does not persistenly store MAC adresses and does no kind of fingerprinting the scanned devices.
 
-Data is transferred to a server via a LoRaWAN network, and/or a wired SPI slave interface. It can also be stored on a local SD-card.
+Data can either be be stored on a local SD-card, transferred to cloud using LoRaWAN network or MQTT over TCP/IP, or transmitted to a local host using serial (SPI) interface.
 
-You can build this project battery powered and reach a full day uptime with a single 18650 Li-Ion cell.
+You can build this project battery powered using ESP32 deep sleep mode and reach long uptimes with a single 18650 Li-Ion cell.
-
-This can all be done with a single small and cheap ESP32 board for less than $20.
 
 # Hardware
 
@@ -52,6 +50,9 @@ LoLin32lite + [LoraNode32-Lite shield](https://github.com/hallard/LoLin32-Lite-L
 - Generic ESP32
 
 Depending on board hardware following features are supported:
+- LoRaWAN communication, supporting various payload formats (see enclosed .js converters)
+- MQTT communication via TCP/IP and Ethernet interface (note: payload transmitted over MQTT will be base64 encoded)
+- SPI serial communication to a local host
 - LED (shows power & status)
 - OLED Display (shows detailed status)
 - RGB LED (shows colorized status)
@@ -64,7 +65,6 @@ Depending on board hardware following features are supported:
 - Switch external power / battery
 - LED Matrix display (similar to [this 64x16 model](https://www.instructables.com/id/64x16-RED-LED-Marquee/), can be ordered on [Aliexpress](https://www.aliexpress.com/item/P3-75-dot-matrix-led-module-3-75mm-high-clear-top1-for-text-display-304-60mm/32616683948.html))
 - SD-card (see section SD-card here) for logging pax data
-- Ethernet interface for MQTT communication via TCP/IP
 
 Target platform must be selected in `platformio.ini`.<br>
 Hardware dependent settings (pinout etc.) are stored in board files in /hal directory. If you want to use a ESP32 board which is not yet supported, use hal file generic.h and tailor pin mappings to your needs. Pull requests for new boards welcome.<br>
@@ -183,20 +183,24 @@ Output of sensor and peripheral data is internally switched by a bitmask registe
 
 | Bit | Sensordata    | Default
 | --- | ------------- | -------
-| 0   | GPS*          | on
+| 0   | Paxcounter    | on
 | 1   | Beacon alarm  | on
 | 2   | BME280/680    | on
-| 3   | Paxcounter    | on
+| 3   | GPS*	      | on
 | 4   | User sensor 1 | on
 | 5   | User sensor 2 | on
 | 6   | User sensor 3 | on
 | 7   | Batterylevel  | off
 
-*) GPS data can also be combined with payload on port 1, *#define GPSPORT 1* in paxcounter.conf to enable
+*) GPS data can also be combined with paxcounter payload on port 1, *#define GPSPORT 1* in paxcounter.conf to enable
+
+# Power saving mode
+
+Paxcounter supports a battery friendly power saving mode. In this mode the device enters deep sleep, after all data is polled from all sensors and the dataset is completeley sent through all user configured channels (LORAWAN / SPI / MQTT). Set *#define SLEEPCYCLE* in paxcounter.conf to enable power saving mode and to specify the duration of a sleep cycle. Power consumption in deep sleep mode depends on your hardware, i.e. if on board peripherals can be switched off or set to a chip specific sleep mode either by  MCU or by power management unit (PMU) as found on TTGO T-BEAM v1.0/V1.1. See *power.cpp* for power management, and *reset.cpp* for sleep and wakeup logic.
 
 # Time sync
 
-Paxcounter can keep it's time-of-day synced with an external time source. Set *#define TIME_SYNC_INTERVAL* in paxcounter.conf to enable time sync. Supported external time sources are GPS, LORAWAN network time and LORAWAN application timeserver time. An on board DS3231 RTC is kept sycned as fallback time source. Time accuracy depends on board's time base which generates the pulse per second. Supported are GPS PPS, SQW output of RTC, and internal ESP32 hardware timer. Time base is selected by #defines in the board's hal file, see example in [**generic.h**](src/hal/generic.h). Bonus: If your LORAWAN network does not support network time, you can run a Node-Red timeserver application using the enclosed [**Timeserver code**](/src/Timeserver/Nodered-Timeserver.json). Configure MQTT nodes in Node-Red to the same LORAWAN application as  paxocunter device is using.
+Paxcounter can keep it's time-of-day synced with an external time source. Set *#define TIME_SYNC_INTERVAL* in paxcounter.conf to enable time sync. Supported external time sources are GPS, LORAWAN network time and LORAWAN application timeserver time. An on board DS3231 RTC is kept sycned as fallback time source. Time accuracy depends on board's time base which generates the pulse per second. Supported are GPS PPS, SQW output of RTC, and internal ESP32 hardware timer. Time base is selected by #defines in the board's hal file, see example in [**generic.h**](src/hal/generic.h). Bonus: If your LORAWAN network does not support network time, you can run a Node-Red timeserver application using the enclosed [**Timeserver code**](/src/Node-RED/Timeserver.json). Configure MQTT nodes in Node-Red for the LORAWAN application used by paxocunter device.
 
 # Wall clock controller
 
@@ -211,7 +215,7 @@ This describes how to set up a mobile PaxCounter:<br> Follow all steps so far fo
 Bluetooth low energy service UUID 0xFD6F, used by Google/Apple COVID-19 Exposure Notification System, can be monitored and counted. By comparing with the total number of observed devices this <A HREF="https://linux-fuer-wi.blogspot.com/2020/10/suche-die-zahl-64879.html">gives an indication</A> how many people staying in proximity are using Apps for tracing COVID-19 exposures, e.g. in Germany the "Corona Warn App". To achive best results with this funcion, use following settings in `paxcounter.conf`:
 
 	#define COUNT_ENS		1	// enable ENS monitoring function
-	#define VENDORFILTER		0	// disable OUI filter (scans ALL device MACs)
+	#define MACFILTER		0	// disable MAC filter
 	#define BLECOUNTER		1	// enable bluetooth sniffing
 	#define WIFICOUNTER		0	// disable wifi sniffing (improves BLE scan speed)
 	#define HAS_SENSOR_1		1	// optional: transmit ENS counter data to server
@@ -303,11 +307,11 @@ Hereafter described is the default *plain* format, which uses MSB bit numbering.
 	byte 6:		Counter mode (0=cyclic unconfirmed, 1=cumulative, 2=cyclic confirmed) [default 0]
 	bytes 7-8:	RSSI limiter threshold value (negative) [default 0]
 	byte 9:		Lora Payload send cycle in seconds/2 (0..255) [default 120]
-	byte 10:	Wifi channel switch interval in seconds/100 (0..255) [default 50]
+	byte 10:	Wifi channel hopping interval in seconds/100 (0..255), 0 means no hopping [default 50]
 	byte 11:	Bluetooth channel switch interval in seconds/100 (0..255) [efault 10]
 	byte 12:	Bluetooth scanner status (1=on, 0=0ff) [default 1]
 	byte 13:	Wifi antenna switch (0=internal, 1=external) [default 0]
-	byte 14:	Vendorfilter mode (0=disabled, 1=enabled) [default 0]
+	byte 14:	count randomizated MACs only (0=disabled, 1=enabled) [default 1]
 	byte 15:	RGB LED luminosity (0..100 %) [default 30]
 	byte 16:	Payload filter mask
 	byte 17:	Beacon proximity alarm mode (1=on, 0=off) [default 0]
@@ -360,9 +364,9 @@ Hereafter described is the default *plain* format, which uses MSB bit numbering.
 
 # Remote control
 
-The device listenes for remote control commands on LoRaWAN Port 2. Multiple commands per downlink are possible by concatenating them.
+The device listenes for remote control commands on LoRaWAN Port 2. Multiple commands per downlink are possible by concatenating them, but must not exceed a maximum of 10 bytes per downlink.
 
-Note: all settings are stored in NVRAM and will be reloaded when device starts.
+Note: settings can be stored in NVRAM to make them persistant (reloaded during device startup / restart). To store settings, use command 0x20. 
 
 Send for example `8386` as Downlink on Port 2 to get battery status and time/date from the device.
 <img src="img/paxcounter_downlink_example.png">
@@ -437,17 +441,18 @@ Send for example `8386` as Downlink on Port 2 to get battery status and time/dat
 	0 ... 255 payload send cycle in seconds/2
 	e.g. 120 -> payload is transmitted each 240 seconds [default]
 
-0x0B set Wifi channel switch interval timer
+0x0B set Wifi channel hopping interval timer
 
 	0 ... 255 duration for scanning a wifi channel in seconds/100
 	e.g. 50 -> each channel is scanned for 500 milliseconds [default]
+	0 means no hopping, scanning on  channel WIFI_CHANNEL_MIN only
 
 0x0C set Bluetooth channel switch interval timer
 
 	0 ... 255 duration for scanning a bluetooth advertising channel in seconds/100
 	e.g. 8 -> each channel is scanned for 80 milliseconds [default]
 
-0x0D (NOT YET IMPLEMENTED) set BLE and WIFI vendorfilter mode
+0x0D (NOT YET IMPLEMENTED) set BLE and WIFI MAC filter mode
 
 	0 = disabled (use to count devices, not people)
 	1 = enabled [default]
@@ -485,15 +490,15 @@ Send for example `8386` as Downlink on Port 2 to get battery status and time/dat
 0x14 set payload mask
 
 	byte 1 = sensor data payload mask (0..255, meaning of bits see below)
-        0x01 = GPS_DATA
+        0x01 = COUNT_DATA
         0x02 = ALARM_DATA
         0x04 = MEMS_DATA
-        0x08 = COUNT_DATA (default)
+        0x08 = GPS_DATA
-        0x10 = SENSOR_1_DATA (ENS-COUNTS)
+        0x10 = SENSOR_1_DATA (also ENS counter)
         0x20 = SENSOR_2_DATA
         0x40 = SENSOR_3_DATA
         0x80 = BATT_DATA
-    bytes can be combined eg COUNT_DATA ;SENSOR_1_DATA ;BATT_DATA: `0x08 | 0x10 |0x80 = 0x98`
+    bytes can be combined eg COUNT_DATA + SENSOR_1_DATA + BATT_DATA: `0x01 | 0x10 | 0x80 = 0x91`
 
 0x15 set BME data on/off
 
@@ -515,6 +520,19 @@ Send for example `8386` as Downlink on Port 2 to get battery status and time/dat
     0 = disabled [default]
     1 = enabled
 
+0x19 set sleep cycle
+
+	0 ... 255 device sleep cycle in seconds/2
+	e.g. 120 -> device sleeps 240 seconds after each send cycle [default = 0]
+
+0x20 store device configuration
+
+	Current device runtime configuration is stored in NVRAM, will be reloaded after restart
+
+0x21 load device configuration
+
+	Current device runtime configuration will be loaded from NVRAM, replacing current settings immediately (use with care!)
+
 0x80 get device configuration
 
 	Device answers with it's current configuration on Port 3. 

include/bmesensor.h

@@ -21,43 +21,29 @@ extern Ticker bmecycler;
 extern bmeStatus_t
     bme_status; // Make struct for storing gps data globally available
 
-// --- Bosch BSEC v1.4.7.4 library configuration ---
+// --- Bosch BSEC library configuration ---
-// 3,3V supply voltage; 3s max time between sensor_control calls; 4 days
+// We use 3,3V supply voltage; 3s max time between sensor_control calls; 4 days
 // calibration. Change this const if not applicable for your application (see
-// BME680 datasheet)
+// BME680 datasheet) Note: 3s max time must not exceed BMECYCLE frequency set in
-// Note: 3s max time not exceed BMECYCLE frequency set in paxcounter.conf!
+// paxcounter.conf!
-const uint8_t bsec_config_iaq[454] = {
+
-    4,   7,   4,   1,   61,  0,   0,   0,   0,   0,   0,   0,   174, 1,   0,
+const uint8_t bsec_config_iaq[] = {
-    0,   48,  0,   1,   0,   0,   192, 168, 71,  64,  49,  119, 76,  0,   0,
+#include "config/generic_33v_3s_4d/bsec_iaq.txt"
-    225, 68,  137, 65,  0,   63,  205, 204, 204, 62,  0,   0,   64,  63,  205,
+};
-    204, 204, 62,  0,   0,   0,   0,   216, 85,  0,   100, 0,   0,   0,   0,
+
-    0,   0,   0,   0,   28,  0,   2,   0,   0,   244, 1,   225, 0,   25,  0,
+/* Configure the BSEC library with information about the sensor
-    0,   128, 64,  0,   0,   32,  65,  144, 1,   0,   0,   112, 65,  0,   0,
+    18v/33v = Voltage at Vdd. 1.8V or 3.3V
-    0,   63,  16,  0,   3,   0,   10,  215, 163, 60,  10,  215, 35,  59,  10,
+    3s/300s = BSEC operating mode, BSEC_SAMPLE_RATE_LP or BSEC_SAMPLE_RATE_ULP
-    215, 35,  59,  9,   0,   5,   0,   0,   0,   0,   0,   1,   88,  0,   9,
+    4d/28d = Operating age of the sensor in days
-    0,   229, 208, 34,  62,  0,   0,   0,   0,   0,   0,   0,   0,   218, 27,
+    generic_18v_3s_4d
-    156, 62,  225, 11,  67,  64,  0,   0,   160, 64,  0,   0,   0,   0,   0,
+    generic_18v_3s_28d
-    0,   0,   0,   94,  75,  72,  189, 93,  254, 159, 64,  66,  62,  160, 191,
+    generic_18v_300s_4d
-    0,   0,   0,   0,   0,   0,   0,   0,   33,  31,  180, 190, 138, 176, 97,
+    generic_18v_300s_28d
-    64,  65,  241, 99,  190, 0,   0,   0,   0,   0,   0,   0,   0,   167, 121,
+    generic_33v_3s_4d
-    71,  61,  165, 189, 41,  192, 184, 30,  189, 64,  12,  0,   10,  0,   0,
+    generic_33v_3s_28d
-    0,   0,   0,   0,   0,   0,   0,   229, 0,   254, 0,   2,   1,   5,   48,
+    generic_33v_300s_4d
-    117, 100, 0,   44,  1,   112, 23,  151, 7,   132, 3,   197, 0,   92,  4,
+    generic_33v_300s_28d
-    144, 1,   64,  1,   64,  1,   144, 1,   48,  117, 48,  117, 48,  117, 48,
+*/
-    117, 100, 0,   100, 0,   100, 0,   48,  117, 48,  117, 48,  117, 100, 0,
-    100, 0,   48,  117, 48,  117, 100, 0,   100, 0,   100, 0,   100, 0,   48,
-    117, 48,  117, 48,  117, 100, 0,   100, 0,   100, 0,   48,  117, 48,  117,
-    100, 0,   100, 0,   44,  1,   44,  1,   44,  1,   44,  1,   44,  1,   44,
-    1,   44,  1,   44,  1,   44,  1,   44,  1,   44,  1,   44,  1,   44,  1,
-    44,  1,   8,   7,   8,   7,   8,   7,   8,   7,   8,   7,   8,   7,   8,
-    7,   8,   7,   8,   7,   8,   7,   8,   7,   8,   7,   8,   7,   8,   7,
-    112, 23,  112, 23,  112, 23,  112, 23,  112, 23,  112, 23,  112, 23,  112,
-    23,  112, 23,  112, 23,  112, 23,  112, 23,  112, 23,  112, 23,  255, 255,
-    255, 255, 255, 255, 255, 255, 220, 5,   220, 5,   220, 5,   255, 255, 255,
-    255, 255, 255, 220, 5,   220, 5,   255, 255, 255, 255, 255, 255, 255, 255,
-    255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,
-    255, 255, 255, 255, 255, 255, 255, 255, 255, 44,  1,   0,   0,   0,   0,
-    138, 80,  0,   0};
 
 // Helper functions declarations
 int bme_init();

include/cyclic.h

@@ -10,12 +10,12 @@
 #include "display.h"
 #include "sds011read.h"
 #include "sdcard.h"
+#include "macsniff.h"
 
 extern Ticker cyclicTimer;
 
 void setCyclicIRQ(void);
 void doHousekeeping(void);
-uint64_t uptime(void);
 void reset_counters(void);
 uint32_t getFreeRAM();
 

include/globals.h

@@ -18,25 +18,28 @@
 #include "mallocator.h"
 #include <bsec.h>
 
+#define _bit(b) (1U << (b))
+#define _bitl(b) (1UL << (b))
+
 // bits in payloadmask for filtering payload data
-#define GPS_DATA (0x01)
+#define COUNT_DATA _bit(1)
-#define ALARM_DATA (0x02)
+#define ALARM_DATA _bit(2)
-#define MEMS_DATA (0x04)
+#define MEMS_DATA _bit(3)
-#define COUNT_DATA (0x08)
+#define GPS_DATA _bit(4)
-#define SENSOR1_DATA (0x10)
+#define SENSOR1_DATA _bit(5)
-#define SENSOR2_DATA (0x20)
+#define SENSOR2_DATA _bit(6)
-#define SENSOR3_DATA (0x40)
+#define SENSOR3_DATA _bit(7)
-#define BATT_DATA (0x80)
+#define BATT_DATA _bit(8)
 
 // bits in configmask for device runmode control
-#define GPS_MODE (0x01)
+#define GPS_MODE _bit(1)
-#define ALARM_MODE (0x02)
+#define ALARM_MODE _bit(2)
-#define BEACON_MODE (0x04)
+#define BEACON_MODE _bit(3)
-#define UPDATE_MODE (0x08)
+#define UPDATE_MODE _bit(4)
-#define FILTER_MODE (0x10)
+#define FILTER_MODE _bit(5)
-#define ANTENNA_MODE (0x20)
+#define ANTENNA_MODE _bit(6)
-#define BLE_MODE (0x40)
+#define BLE_MODE _bit(7)
-#define SCREEN_MODE (0x80)
+#define SCREEN_MODE _bit(8)
 
 // length of display buffer for lmic event messages
 #define LMIC_EVENTMSG_LEN 17
@@ -56,19 +59,16 @@
       ;                                                                        \
   }
 
-// emulate millis to avoid rollovers
+#define _seconds() millis() / 1000.0
-#define _millis() esp_timer_get_time() / 1000
-#define _micros() esp_timer_get_time()
-#define _seconds() _millis() / 1000.0
 
-enum sendprio_t { prio_low, prio_normal, prio_high };
 enum timesource_t { _gps, _rtc, _lora, _unsynced };
 enum snifftype_t { MAC_SNIFF_WIFI, MAC_SNIFF_BLE, MAC_SNIFF_BLE_ENS };
 enum runmode_t {
   RUNMODE_POWERCYCLE,
   RUNMODE_NORMAL,
   RUNMODE_WAKEUP,
-  RUNMODE_UPDATE
+  RUNMODE_UPDATE,
+  RUNMODE_SLEEP
 };
 
 // Struct holding devices's runtime configuration
@@ -84,12 +84,13 @@ typedef struct __attribute__((packed)) {
   uint8_t countermode; // 0=cyclic unconfirmed, 1=cumulative, 2=cyclic confirmed
   int16_t rssilimit;   // threshold for rssilimiter, negative value!
   uint8_t sendcycle;   // payload send cycle [seconds/2]
+  uint8_t sleepcycle;  // sleep cycle [seconds/2]
   uint8_t wifichancycle; // wifi channel switch cycle [seconds/100]
   uint8_t blescantime;   // BLE scan cycle duration [seconds]
   uint8_t blescan;       // 0=disabled, 1=enabled
   uint8_t wifiscan;      // 0=disabled, 1=enabled
   uint8_t wifiant;       // 0=internal, 1=external (for LoPy/LoPy4)
-  uint8_t vendorfilter;  // 0=disabled, 1=enabled
+  uint8_t macfilter;     // 0=disabled, 1=enabled
   uint8_t rgblum;        // RGB Led luminosity (0..100%)
   uint8_t monitormode;   // 0=disabled, 1=enabled
   uint8_t runmode;       // 0=normal, 1=update
@@ -106,7 +107,6 @@ typedef struct __attribute__((packed)) {
 typedef struct {
   uint8_t MessageSize;
   uint8_t MessagePort;
-  sendprio_t MessagePrio;
   uint8_t Message[PAYLOAD_BUFFER_SIZE];
 } MessageBuffer_t;
 

include/hash.h

@@ -2,8 +2,8 @@
 #define _HASH_H
 
 #include <Arduino.h>
-#include <inttypes.h>
+#include <RokkitHash.h>
 
-uint32_t IRAM_ATTR rokkit(const char *data, int len);
+uint32_t IRAM_ATTR hash(const char *data, int len);
 
 #endif

include/irqhandler.h

@@ -1,17 +1,16 @@
 #ifndef _IRQHANDLER_H
 #define _IRQHANDLER_H
 
-#define DISPLAY_IRQ 0x001
+#define DISPLAY_IRQ _bitl(1)
-#define BUTTON_IRQ 0x002
+#define BUTTON_IRQ _bitl(2)
-#define SENDCYCLE_IRQ 0x004
+#define SENDCYCLE_IRQ _bitl(3)
-#define CYCLIC_IRQ 0x008
+#define CYCLIC_IRQ _bitl(4)
-#define TIMESYNC_IRQ 0x010
+#define TIMESYNC_IRQ _bitl(5)
-#define MASK_IRQ 0x020
+#define MASK_IRQ _bitl(6)
-#define UNMASK_IRQ 0x040
+#define UNMASK_IRQ _bitl(7)
-#define BME_IRQ 0x080
+#define BME_IRQ _bitl(8)
-#define MATRIX_DISPLAY_IRQ 0x100
+#define MATRIX_DISPLAY_IRQ _bitl(9)
-#define PMU_IRQ 0x200
+#define PMU_IRQ _bitl(10)
-#define MQTT_IRQ 0x400
 
 #include "globals.h"
 #include "button.h"
@@ -21,7 +20,6 @@
 #include "bmesensor.h"
 #include "power.h"
 #include "ledmatrixdisplay.h"
-#include "mqttclient.h"
 
 void irqHandler(void *pvParameters);
 void mask_user_IRQ();

include/lorawan.h

@@ -20,9 +20,10 @@
 
 extern TaskHandle_t lmicTask, lorasendTask;
 
-void lora_stack_reset();
+esp_err_t lmic_init(void);
-esp_err_t lora_stack_init(bool do_join);
 void lora_setupForNetwork(bool preJoin);
+void SaveLMICToRTC(int deepsleep_sec);
+void LoadLMICFromRTC();
 void lmictask(void *pvParameters);
 void gen_lora_deveui(uint8_t *pdeveui);
 void RevBytes(unsigned char *b, size_t c);
@@ -33,6 +34,7 @@ void os_getDevEui(u1_t *buf);
 void lora_send(void *pvParameters);
 void lora_enqueuedata(MessageBuffer_t *message);
 void lora_queuereset(void);
+uint32_t lora_queuewaiting(void);
 uint8_t myBattLevelCb(void *pUserData);
 void IRAM_ATTR myEventCallback(void *pUserData, ev_t ev);
 void IRAM_ATTR myRxCallback(void *pUserData, uint8_t port, const uint8_t *pMsg,

include/macsniff.h

@@ -14,7 +14,7 @@
 #include "corona.h"
 #endif
 
-uint16_t get_salt(void);
+uint32_t renew_salt(void);
 uint64_t macConvert(uint8_t *paddr);
 esp_err_t macQueueInit(void);
 void mac_process(void *pvParameters);

include/mqttclient.h

@@ -5,34 +5,22 @@
 #include "rcommand.h"
 #include <MQTT.h>
 #include <ETH.h>
-
+#include <mbedtls/base64.h>
-#define MQTT_ETHERNET 0 // set to 0 to run on Wifi
-#define MQTT_INTOPIC "paxin"
-#define MQTT_OUTTOPIC "paxout"
-#define MQTT_PORT 1883
-#define MQTT_SERVER "broker.shiftr.io"
-//#define MQTT_CLIENTNAME "arduino"
-#define MQTT_USER "try"
-#define MQTT_PASSWD "try"
-#define MQTT_RETRYSEC 20  // retry reconnect every 20 seconds
-#define MQTT_KEEPALIVE 10 // keep alive interval in seconds
-#define MQTT_TIMEOUT 1000 // timeout for all mqtt commands in milliseconds
 
 #ifndef MQTT_CLIENTNAME
-#define MQTT_CLIENTNAME clientId.c_str()
+#define MQTT_CLIENTNAME clientId
 #endif
 
 extern TaskHandle_t mqttTask;
 
 void mqtt_enqueuedata(MessageBuffer_t *message);
+uint32_t mqtt_queuewaiting(void);
 void mqtt_queuereset(void);
-void setMqttIRQ(void);
-void mqtt_loop(void);
 void mqtt_client_task(void *param);
 int mqtt_connect(const char *my_host, const uint16_t my_port);
-void mqtt_callback(MQTTClient *client, char topic[], char payload[],
+void mqtt_callback(MQTTClient *client, char *topic, char *payload, int length);
-                   int length);
 void NetworkEvent(WiFiEvent_t event);
 esp_err_t mqtt_init(void);
+void mqtt_deinit(void);
 
 #endif // _MQTTCLIENT_H

include/rcommand.h

@@ -15,15 +15,28 @@
 #include "timesync.h"
 #include "blescan.h"
 
+// maximum number of elements in rcommand interpreter queue
+#define RCMD_QUEUE_SIZE 5
+
+extern TaskHandle_t rcmdTask;
+
 // table of remote commands and assigned functions
 typedef struct {
   const uint8_t opcode;
-  void (*func)(uint8_t []);
+  void (*func)(uint8_t[]);
   const uint8_t params;
-  const bool store;
 } cmd_t;
 
-void rcommand(const uint8_t cmd[], const uint8_t cmdlength);
+// Struct for remote command processing queue
-void do_reset(bool warmstart);
+typedef struct {
+  uint8_t cmd[10];
+  uint8_t cmdLen;
+} RcmdBuffer_t;
+
+void IRAM_ATTR rcommand(const uint8_t *cmd, const size_t cmdlength);
+void rcmd_queuereset(void);
+uint32_t rcmd_queuewaiting(void);
+void rcmd_deinit(void);
+esp_err_t rcmd_init(void);
 
 #endif

include/reset.h

@@ -10,7 +10,9 @@
 #include "power.h"
 
 void do_reset(bool warmstart);
-void do_after_reset(int reason);
+void do_after_reset(void);
-void enter_deepsleep(const int wakeup_sec, const gpio_num_t wakeup_gpio);
+void enter_deepsleep(const uint64_t wakeup_sec = 60,
+                     const gpio_num_t wakeup_gpio = GPIO_NUM_MAX);
+unsigned long long uptime(void);
 
 #endif // _RESET_H

include/senddata.h

@@ -15,10 +15,11 @@
 
 extern Ticker sendTimer;
 
-void SendPayload(uint8_t port, sendprio_t prio);
+void SendPayload(uint8_t port);
 void sendData(void);
 void checkSendQueues(void);
-void flushQueues();
+void flushQueues(void);
+bool allQueuesEmtpy(void);
 void setSendIRQ(void);
 
 #endif // _SENDDATA_H_

include/spislave.h

@@ -27,11 +27,12 @@ licenses. Refer to LICENSE.txt file in repository for more details.
 #include "globals.h"
 #include "rcommand.h"
 
-esp_err_t spi_init();
-
 extern TaskHandle_t spiTask;
 
+esp_err_t spi_init();
+void spi_deinit(void);
 void spi_enqueuedata(MessageBuffer_t *message);
-void spi_queuereset();
+uint32_t spi_queuewaiting(void);
+void spi_queuereset(void);
 
 #endif // _SPISLAVE_H

include/vendor_array.h

@@ -1,243 +0,0 @@
-std::array<uint32_t, 1683> vendors = {
-    0xa44519, 0x2446c8, 0xd0d003, 0x8cb84a, 0x608b0e, 0x88299c, 0x7c8956,
-    0x201742, 0xd09c7a, 0xc4e39f, 0x2479f3, 0x8c79f5, 0xccd281, 0x88b291,
-    0xc42ad0, 0xd81edd, 0xacf6f7, 0xc02e25, 0x64c2de, 0x58c6f0, 0x70bc10,
-    0x2ca9f0, 0x586b14, 0xbcb863, 0x1040f3, 0x44e66e, 0xc0e862, 0xf40616,
-    0x601d91, 0xd4c94b, 0x70bbe9, 0xf83880, 0x4c569d, 0x38539c, 0x402619,
-    0x6ce85c, 0xe4b2fb, 0xd003df, 0xb4cb57, 0xfc039f, 0x18d717, 0x0057c1,
-    0xa4d990, 0x20a60c, 0x08c5e1, 0x3c576c, 0xe4b021, 0x28ff3c, 0xf099b6,
-    0x1094bb, 0x88e9fe, 0x94bf2d, 0xf86fc1, 0x38892c, 0x749eaf, 0x8035c1,
-    0x2047da, 0xe4c483, 0xc048e6, 0x785dc8, 0x40cbc0, 0xc4618b, 0x08e689,
-    0xdc56e7, 0x38e60a, 0xdcbfe9, 0xcc6ea4, 0xa46cf1, 0x08aed6, 0xa816d0,
-    0x3408bc, 0x1c36bb, 0x3c2eff, 0xf06e0b, 0x24f677, 0xb0ca68, 0xc83c85,
-    0x5433cb, 0x149f3c, 0x9ce063, 0xd03169, 0x7c6456, 0x084acf, 0xb8634d,
-    0xa4e975, 0x3035ad, 0x844167, 0x9800c6, 0xac1f74, 0xa85c2c, 0x00db70,
-    0x4c49e3, 0x389af6, 0xe0aa96, 0x507705, 0xa89675, 0x00ec0a, 0xc8d7b0,
-    0x9097f3, 0x7c1c68, 0xc087eb, 0x388c50, 0xd4503f, 0x245ba7, 0x70f087,
-    0xf0d7aa, 0x3096fb, 0x4827ea, 0x7c787e, 0x28395e, 0x38295a, 0x8cf5a3,
-    0xd47ae2, 0xd8e0e1, 0xe44790, 0xb0702d, 0x6c19c0, 0xf01dbc, 0xf83f51,
-    0x404e36, 0xdc0b34, 0x60a4d0, 0x008701, 0x5c9960, 0x2c3361, 0x101dc0,
-    0x78471d, 0xa07591, 0x0cdfa4, 0x68ebae, 0x444e1a, 0x4844f7, 0x001377,
-    0x002454, 0xe81132, 0x50b7c3, 0x1c5a3e, 0xa02195, 0xf4d9fb, 0x3c6200,       
-    0x00e3b2, 0x301966, 0x94350a, 0x0017d5, 0x001e7d, 0x001df6, 0xc06599,         
-    0xbc79ad, 0xf0e77e, 0xf008f1, 0xe47cf9, 0x58c38b, 0x001d25, 0x08fd0e,         
-    0x041bba, 0x889b39, 0xe432cb, 0x10d542, 0xa0821f, 0xf06bca, 0xac3613,         
-    0xbc8ccd, 0xd022be, 0xec9bf3, 0xf409d8, 0x4c3c16, 0x0073e0, 0x343111,          
-    0x4849c7, 0x849866, 0x9476b7, 0xc4438f, 0xa09169, 0x9893cc, 0x3ccd93,          
-    0x2021a5, 0x6cd68a, 0x002483, 0x001fe3, 0x2c54cf, 0x485929, 0x58a2b5,            
-    0x10f96f, 0x4c6641, 0xac3743, 0x28e31f, 0xecadb8, 0x9801a7, 0xb8bbaf,              
-    0x60c5ad, 0x24f094, 0x086d41, 0xe4faed, 0x288335, 0xdccf96, 0xccb11a,              
-    0xac61ea, 0x38b54d, 0x1c5cf2, 0xe0c767, 0x80ed2c, 0xa80600, 0xf05a09,               
-    0x503275, 0x08fc88, 0xf8d0bd, 0x94b10a, 0x3cbbfd, 0xa48431, 0xa0b4a5,               
-    0xe4f8ef, 0x78595e, 0x0c1420, 0x24f5aa, 0x988389, 0x84a466, 0xc4576e,                 
-    0x508569, 0x489d24, 0xb07994, 0xa470d6, 0xc8f230, 0x8c0ee3, 0x28ed6a,                 
-    0x38f23e, 0x902155, 0xd8b377, 0xa09347, 0xe8bba8, 0xb0aa36, 0xa4d18c,                 
-    0x241eeb, 0xcc25ef, 0x28cfe9, 0x00a040, 0x003065, 0x3cd0f8, 0x680927,                   
-    0x1093e9, 0x442a60, 0xc82a14, 0x3c0754, 0xa4b197, 0xa4d1d2, 0x28cfda,                   
-    0x6cc26b, 0x44d884, 0x64200c, 0x001451, 0x001e52, 0x0021e9, 0x002608,                   
-    0x0026b0, 0x0026bb, 0xd49a20, 0xf81edf, 0xcc08e0, 0xf0b479, 0x045453,                   
-    0xe88d28, 0x949426, 0x207d74, 0xf4f15a, 0xc86f1d, 0x18af8f, 0xc8b5b7,                   
-    0x90b21f, 0xb8e856, 0xd89695, 0x64a3cb, 0x30f7c5, 0x40b395, 0x44fb42,                      
-    0x98fe94, 0xd8004d, 0x542696, 0xc8334b, 0x64e682, 0x9c207b, 0xb065bd,                      
-    0x8c2daa, 0x848506, 0xf4f951, 0xc06394, 0x3090ab, 0x1499e2, 0xfce998,                      
-    0x0cbc9f, 0x34363b, 0xd0a637, 0x789f70, 0xe0accb, 0xa0999b, 0x24240e,                      
-    0x903c92, 0xd81d72, 0xd8bb2c, 0xd04f7e, 0x9cf387, 0xa85b78, 0xb418d1,                      
-    0xf0dbf8, 0x48746e, 0x341298, 0x70e72c, 0x70ece4, 0x54ae27, 0xc8f650,                         
-    0x68ae20, 0xac87a3, 0xa88e24, 0x2078f0, 0x70480f, 0xcc20e8, 0xf0b0e7,                         
-    0x0469f8, 0x205531, 0xe8b4c8, 0xd087e2, 0xf05b7b, 0xb047bf, 0x7c0bc6,                         
-    0x80c5e6, 0x5440ad, 0x804e81, 0xfc8f90, 0xe89120, 0x4480eb, 0x9cd35b,                         
-    0xa89fba, 0x4886e8, 0x30d587, 0xec59e7, 0x2c2997, 0xd059e4, 0x14a364,                           
-    0x7ced8d, 0x002538, 0x0022a1, 0x7cf31b, 0x0c2fb0, 0xf4d620, 0x8cf112,                           
-    0x44aeab, 0xa4f05e, 0x28167f, 0xf887f1, 0x305714, 0xc8b1cd, 0x1460cb,                           
-    0xb8f12a, 0x04c807, 0x20f478, 0x90735a, 0x00fa21, 0x7c2302, 0xd49dc0,                            
-    0xe0dcff, 0x846fce, 0x804a14, 0x703c69, 0x489dd1, 0xb06fe0, 0xc08c71,                            
-    0x60d0a9, 0x48fda3, 0xa45046, 0x007c2d, 0xb831b5, 0x14c213, 0xa4d931,                            
-    0xbcfed9, 0x808223, 0x5029f5, 0x007204, 0xbca58b, 0x80ceb9, 0xe06267,                             
-    0x082525, 0xf460e2, 0x1cc3eb, 0x00c3f4, 0x7836cc, 0x48605f, 0x2816a8,                             
-    0x9c2ea1, 0xbce143, 0x647033, 0x846878, 0xc8d083, 0x6030d4, 0xf895ea,                             
-    0x18f1d8, 0x30d9d9, 0x0cf346, 0x80ad16, 0xfc643a, 0xa8515b, 0xb4f7a1,                             
-    0x88bd45, 0x54fcf0, 0x306a85, 0x4cdd31, 0xd0817a, 0x98ca33, 0x68ab1e,                             
-    0x70ef00, 0xbcffeb, 0x0c1539, 0x88b4a6, 0x2c8a72, 0xd88f76, 0x409c28,                             
-    0xd0b128, 0xbc5451, 0xec51bc, 0xf079e8, 0x58e28f, 0x787b8a, 0x88365f,                               
-    0x2c4053, 0x3cf591, 0x602101, 0xacafb9, 0x041b6d, 0xecf342, 0x503da1,                               
-    0x4c1a3d, 0x503237, 0xb0481a, 0xb49cdf, 0x48bf6b, 0x3c0518, 0x900628,                               
-    0x9c84bf, 0x00b362, 0xe4e4ab, 0x60334b, 0xf4f524, 0xcc2d83, 0xfcd848,                                    
-    0xec107b, 0x1c232c, 0x0021d1, 0x001fcc, 0xec8892, 0x60a10a, 0x8c71f8,                                    
-    0xcc051b, 0x8c7712, 0x9463d1, 0x0021d2, 0x5c497d, 0x7825ad, 0xece09b,                                    
-    0xbc20a4, 0x08d42b, 0x789ed0, 0xb0c4e7, 0xa00798, 0x001fcd, 0x38ece4,                                    
-    0x945103, 0x002490, 0x0023d7, 0x549b12, 0xfca13e, 0x24c696, 0x94d771,                                        
-    0xe84e84, 0x001632, 0xe4e0c5, 0xc81479, 0x1caf05, 0x0016db, 0x001ee2,                                        
-    0x20d5bf, 0x5ce8eb, 0xc0bdd1, 0xb479a7, 0xb0df3a, 0x805719, 0x34be00,                                        
-    0x78521a, 0x38256b, 0x205ef7, 0x141f78, 0xb47443, 0x30766f, 0xa8922c,                                            
-    0xf80cf3, 0xc49a02, 0x001f6b, 0x0026e2, 0xa860b6, 0xc4b301, 0xe05f45,                                            
-    0x483b38, 0x1c9148, 0x5c70a3, 0x64cc2e, 0xf877b8, 0x182195, 0x44783e,                                               
-    0x30636b, 0xa4f1e8, 0x14bb6e, 0xe498d1, 0x6c2779, 0x28cc01, 0x6cf373,                                               
-    0x9c3aaf, 0x781fdb, 0x4ca56d, 0xb86ce8, 0x0cb319, 0x183f47, 0xb46293,                                               
-    0x50a4c8, 0x1867b0, 0x6c8336, 0x002557, 0x001ccc, 0xb4e1c4, 0xe0757d,                                                 
-    0x34bb26, 0x806c1b, 0x2082c0, 0xdc6dcd, 0x440010, 0x0056cd, 0x00cdfe,                                                 
-    0xe498d6, 0xf8db7f, 0x64a769, 0xe899c4, 0xbccfcc, 0xf431c3, 0x64a5c3,                                                   
-    0xbc3aea, 0x7c1dd9, 0xa086c6, 0x9c99a0, 0x584498, 0x002332, 0x00236c,                                                   
-    0x0023df, 0x002500, 0x0025bc, 0x0019e3, 0x001b63, 0x001ec2, 0x001ff3,                                                      
-    0x0010fa, 0x0050e4, 0x000d93, 0x7cfadf, 0x78a3e4, 0x148fc6, 0x286ab8,                                                      
-    0x28e02c, 0xe0b9ba, 0x00c610, 0xb8f6b1, 0x8cfaba, 0x7cd1c3, 0xf0dce2,                                                        
-    0x24ab81, 0xe0f847, 0x28e7cf, 0xe4ce8f, 0xa82066, 0xbc52b7, 0x5c5948,
-    0xc8bcc8, 0xe8040b, 0x145a05, 0x1caba7, 0xc0847a, 0x34159e, 0x58b035,
-    0xdc86d8, 0x90b931, 0xd0e140, 0x24a2e1, 0x80ea96, 0x600308, 0x04f13e,
-    0x98f0ab, 0x7831c1, 0x783a84, 0x5c8d4e, 0x8863df, 0x881fa1, 0xc8e0eb,
-    0x98b8e3, 0x885395, 0x786c1c, 0x4c8d79, 0x1ce62b, 0x0c3021, 0x0c3e9f,
-    0xfcfc48, 0x9c293f, 0x087402, 0x94f6a3, 0x98e0d9, 0xcc29f5, 0x285aeb,
-    0xf02475, 0x2c1f23, 0x549f13, 0xf0dbe2, 0x748114, 0x18f643, 0xa45e60,
-    0xa01828, 0xd0034b, 0x10417f, 0xa8667f, 0xd02598, 0x80be05, 0x24a074,
-    0x84788b, 0x587f57, 0x006d52, 0xacee9e, 0xb857d8, 0xb844d9, 0x1c56fe,
-    0xac5a14, 0x08eca9, 0xf8cfc5, 0x7840e4, 0xe09971, 0x10d38a, 0x206274,
-    0xd48f33, 0x20a99b, 0x6077e2, 0xfc1910, 0x3ca10d, 0x646cb2, 0x680571,
-    0x14b484, 0x3059b7, 0xa43d78, 0x00eebd, 0x502e5c, 0x980d2e, 0xd4206d,
-    0x7c1e52, 0xdcb4c4, 0x7c6f06, 0x749ef5, 0x68bfc4, 0x04b1a1, 0xcc464e,
-    0x507ac5, 0x6cd71f, 0x4c6be8, 0x8c861e, 0x542b8d, 0x8ce5c0, 0xf08a76,
-    0xecaa25, 0x9078b2, 0xbc7fa4, 0x687d6b, 0x485169, 0xa8db03, 0x60ab67,
-    0x4418fd, 0x005b94, 0xe0897e, 0xa8346a, 0x3c20f6, 0x7c38ad, 0x885a06,
-    0x2c5d34, 0x7c035e, 0xd467d3, 0xa41232, 0x64c753, 0x38f9d3, 0xfc183c,
-    0xf47def, 0x7c8bb5, 0x3830f9, 0x90e17b, 0xd81c79, 0x58e6ba, 0x1801f1,
-    0x9c0cdf, 0x14c697, 0x7c03ab, 0x00b5d0, 0x1496e5, 0xd07fa0, 0x7c6b9c,
-    0x108ee0, 0xfca621, 0xd832e3, 0x9487e0, 0x4466fc, 0x50a009, 0x50a67f,
-    0xd461da, 0xb841a4, 0x9ce65e, 0xc49880, 0xe0338e, 0xf01898, 0x881908,
-    0x5c0947, 0x14205e, 0x08f69c, 0x641cae, 0x003de8, 0x48c796, 0xf4c248,
-    0xf47190, 0x2802d8, 0x24181d, 0x641cb0, 0x54b802, 0xd4909c, 0xe4e0a6,
-    0x00e091, 0x503cea, 0xb4f1da, 0x80b03d, 0xe49adc, 0xace4b5, 0xf06d78,
-    0xd0d2b0, 0x448f17, 0x1cddea, 0x78886d, 0x20ee28, 0xb4f61c, 0x08f4ab,
-    0x8c8590, 0x6c96cf, 0x508f4c, 0xd463c6, 0xdc44b6, 0x1007b6, 0x342d0d,
-    0x54bd79, 0x30074d, 0x947be7, 0x5092b9, 0xdc74a8, 0x88d50c, 0xc4ae12,
-    0x989e63, 0x886b6e, 0xd4dccd, 0x484baa, 0xd4ae05, 0xdca904, 0x6cab31,
-    0x4c74bf, 0x5082d5, 0xf0ee10, 0xb81daa, 0x5caf06, 0x64b0a6, 0x7c04d0,
-    0x84fcac, 0xdc0c5c, 0x70700d, 0x186590, 0xf86214, 0x784f43, 0x404d7f,
-    0x1c48ce, 0x6c5c14, 0xcc61e5, 0x609ac1, 0x20dbab, 0x748d08, 0x9c8ba0,
-    0xcc088d, 0x38a4ed, 0x0007ab, 0xe8e5d6, 0xc87e75, 0x00265f, 0x00233a,
-    0x382dd1, 0x10ddb1, 0x00166c, 0x001599, 0x0012fb, 0xd0667b, 0x1c66aa,
-    0x1489fd, 0xbc851f, 0x002491, 0x3c8bfe, 0xd4e8b2, 0xe8039a, 0x30cda7,
-    0x2c4401, 0xb8d9ce, 0x002339, 0x5001bb, 0x001247, 0x0015b9, 0xb85e7b,
-    0x1c77f6, 0x742344, 0xc8ba94, 0x843838, 0x54880e, 0xf025b7, 0xe492fb,
-    0x6cb7f4, 0x181eb0, 0x5c3c27, 0xbc72b1, 0x78f7be, 0x684898, 0x3423ba,
-    0x400e85, 0x88797e, 0xd013fd, 0x888322, 0xe89309, 0x6cd032, 0x3cbdd8,
-    0x78c3e9, 0x64899a, 0xf8a9d0, 0xccfa00, 0xa816b2, 0x64bc0c, 0x74a722,
-    0xf01c13, 0x344df7, 0x583f54, 0xc01ada, 0x8c1abf, 0x30cbf8, 0xa0cbfd,
-    0xe45d75, 0x408805, 0x98398e, 0xd0fccc, 0xc09727, 0x84a134, 0x0c5101,
-    0x2cf0a2, 0x68fb7e, 0x6c2483, 0x5cca1a, 0xac0d1b, 0x0034da, 0x202d07,
-    0xb44bd2, 0xdc415f, 0x102ab3, 0xe8b2ac, 0xe49a79, 0xf45c89, 0x20768f,
-    0x300d43, 0x607edd, 0x08373d, 0xc488e5, 0x1077b1, 0x64b853, 0x389496,
-    0x5056bf, 0x90f1aa, 0x74458a, 0xfcc734, 0x8425db, 0xb0ec71, 0xe458b8,
-    0x088c2c, 0xa49a58, 0x08ee8b, 0x68ed43, 0x70aab2, 0x000f86, 0xf8e079,
-    0xccc3ea, 0x40786a, 0x38cada, 0x34ab37, 0x18af61, 0x5cf938, 0x002376,
-    0x38e7d8, 0x188796, 0xb4cef6, 0xcc4463, 0x6c72e7, 0x741bb2, 0xf8a45f,
-    0x640980, 0x185936, 0x60fec5, 0xe425e7, 0x7c6d62, 0x40d32d, 0xc42c03,
-    0x9027e4, 0xbc926b, 0x101c0c, 0x080007, 0x0016cb, 0x0017f2, 0x001f5b,
-    0x002436, 0x00254b, 0x6c3e6d, 0xbc6778, 0x20c9d0, 0x68967b, 0x581faa,
-    0x88c663, 0xa46706, 0x8c5877, 0xa8fad8, 0x008865, 0xbc3baf, 0x3ce072,
-    0x84fcfe, 0xe48b7f, 0xd8d1cb, 0xb817c2, 0x7c11be, 0x98d6bb, 0x283737,
-    0x50ead6, 0x189efc, 0x804971, 0x7cf05f, 0x109add, 0x848e0c, 0x3c15c2,
-    0x6c709f, 0x6476ba, 0x34e2fd, 0x04489a, 0x80e650, 0x90fd61, 0x2cf0ee,
-    0x5c97f3, 0x8c2937, 0xaccf5c, 0x80006e, 0xa4c361, 0xb09fba, 0x0c4de9,
-    0xe0f5c6, 0xa0edcd, 0x087045, 0xa88808, 0xc0f2fb, 0x24e314, 0xf0f61c,
-    0x38484c, 0x38c986, 0xd03311, 0xd4f46f, 0x48437c, 0x34a395, 0x787e61,
-    0x60f81d, 0x5cf5da, 0x18ee69, 0x649abe, 0xac293a, 0x9cfc01, 0x9c35eb,
-    0xf099bf, 0x94e96a, 0x507a55, 0x5882a8, 0x24da9b, 0xe83a12, 0x80656d,
-    0x38d40b, 0x209bcd, 0xfcf136, 0x18895b, 0x7cf90e, 0x50f0d3, 0x78bdbc,
-    0x84119e, 0xe4907e, 0x149a10, 0x485073, 0x244b03, 0x74e28c, 0x244b81,
-    0x60af6d, 0xb85a73, 0x981dfa, 0x102f6b, 0xc44202, 0x103047, 0xf884f2,
-    0x5c2e59, 0xe0cbee, 0x002248, 0x8031f0, 0xe0d083, 0xd80b9a, 0x5c666c,
-    0xc4e1a1, 0x1855e3, 0xe450eb, 0x886440, 0x6070c0, 0xf0c371, 0x987a14,
-    0xc83ddc, 0x845733, 0x1819d6, 0xbc98df, 0x70dda8, 0x4c6f9c, 0x4883b4,
-    0x0017fa, 0x941625, 0x34a8eb, 0xa483e7, 0xf4afe7, 0xac88fd, 0x20326c,
-    0x6489f1, 0x2034fb, 0xa89ced, 0xe458e7, 0xdc080f, 0xf8e94e, 0xec2ce2,
-    0x40bc60, 0xe83617, 0x9c648b, 0x344262, 0x14d00d, 0x703a51, 0x04e598,
-    0x6cc7ec, 0xc0bdc8, 0x647bce, 0xa887b3, 0x6c006b, 0x24fce5, 0x9caa1b,
-    0x70fd46, 0x8c83e1, 0x889f6f, 0x482ca0, 0x0ccb85, 0x08d46a, 0x68e7c2,
-    0x58b10f, 0x645aed, 0xc0b658, 0x48a91c, 0x50bc96, 0xfc2a9c, 0xa056f3,
-    0x549963, 0x90dd5d, 0xc819f7, 0x3880df, 0x3cdcbc, 0x804e70, 0xd4e6b7,
-    0x04d13a, 0xc48466, 0x347c25, 0xcc2db7, 0x0c9838, 0xd41a3f, 0x5c865c,
-    0x04b167, 0xec8350, 0x2c5491, 0xe42b34, 0x3c2ef9, 0xa04ea7, 0xf0989d,
-    0xd80831, 0x10f1f2, 0x982d68, 0xb019c6, 0x3866f0, 0x703eac, 0x7c2edd,
-    0x3cf7a4, 0x986f60, 0xc49ded, 0x9810e8, 0xc0d012, 0xbca920, 0x48a195,
-    0xf80377, 0x8058f8, 0xdca4ca, 0x8c8fe9, 0x5cba37, 0x2c200b, 0x8866a5,
-    0xacc1ee, 0x805a04, 0xbc8385, 0x2c598a, 0xe47dbd, 0x001cb3, 0x24920e,
-    0xfc4203, 0xa01081, 0xf07960, 0xa0d795, 0xbc4760, 0x04180f, 0x2013e0,
-    0x002566, 0xc09f05, 0x606bbd, 0x00214c, 0x0018af, 0x001ee1, 0x00166b,
-    0x0000f0, 0x8cc8cd, 0xa8f274, 0xd487d8, 0x184617, 0x380a94, 0xd0dfc7,
-    0xd0c1b1, 0x8018a7, 0xf47b5e, 0x70f927, 0xc45006, 0x88329b, 0x1449e0,
-    0xd02544, 0xbc4486, 0x20d390, 0x9401c2, 0x50fc9f, 0x380b40, 0xb8ff61,
-    0xf0728c, 0x34aa8b, 0x24dbed, 0x68c44d, 0x440444, 0x84b541, 0x006f64,
-    0xdc6672, 0xf8e61a, 0xcc2d8c, 0x98d6f7, 0x700514, 0xe892a4, 0x10683f,
-    0x40b0fa, 0x0025e5, 0x0021fb, 0x34fcef, 0xbcf5ac, 0x0c4885, 0x0022a9,
-    0x9c2a83, 0xa039f7, 0xb0e235, 0x14c913, 0xe09861, 0xa06090, 0xbc765e,
-    0xd85b2a, 0x90c1c6, 0x70a2b3, 0xf40f24, 0x4c57ca, 0xc46ab7, 0x48e9f1,
-    0xc83f26, 0x40163b, 0xc83870, 0x6c8fb5, 0x1c9e46, 0xc0ccf8, 0x9c4fda,
-    0x8489ad, 0x647791, 0x9ce6e7, 0x9c0298, 0x28987b, 0x54fa3e, 0x0c8910,
-    0x78abbb, 0xd8c4e9, 0xbcd11f, 0xf4428f, 0x446d6c, 0x00f46f, 0x0c715d,
-    0x34bb1f, 0x406f2a, 0x985fd3, 0x60beb5, 0xf8f1b6, 0xf4f1e1, 0x9cd917,
-    0x9068c3, 0x68dbca, 0x086698, 0xbc5436, 0x044bed, 0x6c8dc1, 0x0cd746,
-    0x60a37d, 0xd40b1a, 0xfc64ba, 0x9060f1, 0xa4516f, 0x68dfdd, 0x98fae3,
-    0xf0b429, 0xb8782e, 0x000502, 0x000a95, 0x00264a, 0x041e64, 0x001124,
-    0x002241, 0x7cc537, 0x78ca39, 0x18e7f4, 0x70cd60, 0x8c7b9d, 0xd89e3f,
-    0xb8c75d, 0x0c74c2, 0x403004, 0x842999, 0x74e2f5, 0xe0c97a, 0x68a86d,
-    0x7cc3a1, 0x7073cb, 0x90840d, 0xe80688, 0xec852f, 0x00f4b9, 0x5c95ae,
-    0x9803d8, 0x60c547, 0x685b35, 0x2cb43a, 0x689c70, 0x380f4a, 0x3010e4,
-    0xa886dd, 0x444c0c, 0xb4f0ab, 0x80929f, 0x9c04eb, 0x5c969d, 0x609217,
-    0x84b153, 0xe06678, 0x48d705, 0x041552, 0xcc785f, 0x88cb87, 0xf0c1f1,
-    0x843835, 0x8c006d, 0xa8968a, 0xf41ba1, 0x60d9c7, 0x3cab8e, 0xf82793,
-    0x907240, 0x908d6c, 0xb8098a, 0x4c7c5f, 0x68644b, 0xc81ee7, 0xa43135,
-    0x68d93c, 0x00f76f, 0xc88550, 0x7014a6, 0x985aeb, 0x78d75f, 0xe0b52d,
-    0x6c94f8, 0xc0cecd, 0x2cae2b, 0xc869cd, 0xa4b805, 0x5cadcf, 0xbc6c21,
-    0xf40e22, 0x544e90, 0xc01173, 0xbce63f, 0x7c9122, 0xacbc32, 0x2827bf,
-    0x800184, 0x8cbfa6, 0xc8a823, 0xb0c559, 0xbc1485, 0x9c6c15, 0xc0335e,
-    0xd0929e, 0x083d88, 0x608f5c, 0x109266, 0x281878, 0x847a88, 0xa0f450,
-    0xa826d9, 0x00155d, 0x00125a, 0x000d3a, 0x0003ff, 0x18d0c5, 0x1cccd6,
-    0x582059, 0x74e1b6, 0xf40e01, 0x1495ce, 0x50de06, 0xcc660a, 0xfc1d43,
-    0x0024e9, 0xb4c4fc, 0x7cd661, 0x98b8ba, 0x103025, 0xb8b2f8, 0x98460a,
-    0xb85d0a, 0x7c9a1d, 0x5462e2, 0x149d99, 0x489507, 0xd85575, 0xd411a3,
-    0x04ba8d, 0xe446da, 0x58d9c3, 0x3c8375, 0xb8bc5b, 0xd8ce3a, 0xb8c74a,
-    0x94f6d6, 0xf82d7c, 0xc09ad0, 0x94b01f, 0x90633b, 0xfcaab6, 0x782327,
-    0xdcf756, 0x74b587, 0xfcb6d8, 0x18810e, 0x608c4a, 0x241b7a, 0x8cfe57,
-    0xc0a600, 0xa823fe, 0x1c427d, 0xcc2119, 0x304b07, 0x000393, 0x702ad5,
-    0x74eb80, 0x0ce0dc, 0xd868c3, 0xc493d9, 0xa82bb9, 0x1c1ac0, 0x88ae07,
-    0x40831d, 0xdcd3a2, 0x5c1dd9, 0x68fef7, 0xd07714, 0x587a6a, 0x705aac,
-    0x685acf, 0x0ca8a7, 0x2c61f6, 0xd4a33d, 0xf0766f, 0x4098ad, 0x6c4d73,
-    0x68ef43, 0xd02b20, 0xd86375, 0x30b4b8, 0x9c8c6e, 0x18f0e4, 0x00bf61,
-    0xd00401, 0xdc5583, 0xb8c111, 0x9ce33f, 0x7867d7, 0x087808, 0x887598,
-    0xc0174d, 0xa407b6, 0x04d6aa, 0x08152f, 0xf4f5db, 0xc0a53e, 0xecd09f,
-    0xa8be27, 0x94d029, 0x308454, 0x5c5181, 0x608e08, 0x4c189a, 0x58c5cb,
-    0xb4bff6, 0x74f61c, 0x84c0ef, 0xa8b86e, 0xc40bcb, 0xb83765, 0x14bd61,
-    0xc0d3c0, 0x948bc1, 0x14568e, 0xd4619d, 0x7c5049, 0x64b473, 0x7451ba,
-    0x7802f8, 0xec01ee, 0x682737, 0x58404e, 0xd0c5f3, 0xbc9fef, 0x20ab37,
-    0x60f445, 0x2c0e3d, 0x88e87f, 0x9cf48e, 0x5cf7e6, 0xb853ac, 0x203cae,
-    0x2cbaba, 0x40d3ae, 0xa03be3, 0x4c3275, 0x3816d1, 0xd0176a, 0xd48890,
-    0x5492be, 0x949aa9, 0x001c43, 0x002399, 0x0017c9, 0x7cf854, 0xc4731e,
-    0xec1f72, 0xe4121d, 0xe8508b, 0xf8042e, 0x0023d6, 0x001b98, 0x001a8a,
-    0x3c5a37, 0xf49f54, 0x34c3ac, 0x44f459, 0x00265d, 0x002567, 0xbcb1f3,
-    0xc462ea, 0x182666, 0x30d6c9, 0xcc07ab, 0x1c62b8, 0xccf9e8, 0xd857ef,
-    0x18e2c2, 0x28bab5, 0xe440e2, 0x103b59, 0xd890e8, 0x9852b1, 0x14f42a,
-    0x0808c2, 0xccfe3c, 0xb43a28, 0x78a873, 0xd83062, 0xc041f6, 0x001e75,
-    0x001c62, 0xf895c7, 0x34145f, 0x0821ef, 0x505527, 0x88c9d0, 0x8c3ae3,
-    0x00aa70, 0x60e3ac, 0x4c0bbe, 0xb88d12, 0x845181, 0x348a7b, 0x78009e,
-    0xacc33a, 0x54f201, 0x70288b, 0x8c8ef2, 0x90b0ed, 0x04d3cf, 0x1c3ade,
-    0x509ea7, 0xa88195, 0x88add2, 0xac5f3e, 0xb48b19, 0xbcec5d, 0x28a02b,
-    0xb8c68e, 0x04fe31, 0x4cbca5, 0xd831cf, 0x188331, 0x9c65b0, 0x8455a5,
-    0xa87c01, 0x50f520, 0x64b310, 0xa4ebd3, 0xb0d09c, 0x50c8e5, 0x5cf6dc,
-    0x0026ff, 0xa4e4b8, 0xf40b93, 0x1c69a5, 0x94ebcd, 0x141aa3, 0x1430c6,
-    0x88074b, 0x3871de, 0x7081eb, 0x78f882, 0x606944, 0x807abf, 0x00092d,
-    0x7c6193, 0x0452f3, 0x90e7c4, 0xa81b5a, 0x2c5bb8, 0xacf7f3, 0xd4970b,
-    0x8cbebe, 0x14f65a, 0x009ec8, 0x0c1daf, 0x3480b3, 0xf48b32, 0x60fb42,
-    0x64b9e8, 0xd8a25e, 0x000a27, 0x001d4f, 0x002312, 0x60facd, 0x003ee1,
-    0xfc253f, 0x183451, 0x0c771a, 0x286aba, 0x3451c9, 0x406c8f, 0xd023db,
-    0x70dee2, 0x5855ca, 0xdc2b61, 0x40a6d9, 0x4cb199, 0xc09f42, 0x705681,
-    0x040cce, 0x403cfc, 0x4860bc, 0xf0cba1, 0x182032, 0x34c059, 0xf0d1a9,
-    0x14109f, 0x04f7e4, 0xdc9b9c, 0x54724f, 0x8c7c92, 0xb03495, 0x042665,
-    0xec3586, 0x54eaa8, 0x28e14c, 0xe4c63d, 0x54e43a, 0x04db56, 0x04e536,
-    0xe8802e, 0x006171, 0x6c4008, 0x7c6df8, 0x78fd94, 0x2cbe08, 0xac3c0b,
-    0x701124, 0xf437b7, 0xd8cf9c, 0xa8bbcf, 0xac7f3e, 0x280b5c, 0xacfdec,
-    0x28f076, 0x20a2e4, 0xbc4cc4, 0xdc3714, 0x40331a, 0xccc760, 0x7c0191,
-    0x84100d, 0x80d605, 0xdc2b2a, 0x48137e, 0x382de8, 0xc08997, 0x04c23e,
-    0x380195, 0xb4ae2b, 0x5c5188, 0x0ce725, 0xe0db10, 0x1432d1, 0x1816c9,
-    0x842e27, 0x0c413e, 0x9000db, 0xb4ef39, 0xc808e9, 0x183a2d, 0x8463d6,
-    0xb84fd5, 0xc0eefb, 0x206e9c, 0x6c2f2c, 0x18227e, 0x30c7ae, 0x501ac5,
-    0x6045bd, 0x1cb094, 0xe85b5b, 0x0025ae, 0x001dd8, 0x000a75, 0xa4c939,
-    0xc0dcda, 0x04b429, 0x48794d,
-};

include/wifiscan.h

@@ -8,6 +8,8 @@
 #include "antenna.h" // code for switching wifi antennas
 #include "macsniff.h"
 
+extern TimerHandle_t WifiChanTimer;
+
 void wifi_sniffer_init(void);
 void switch_wifi_sniffer(uint8_t state);
 void IRAM_ATTR wifi_sniffer_packet_handler(void *buff,

lib/BintrayClient/src/BintrayClient.cpp

@@ -113,16 +113,17 @@ String BintrayClient::getLatestVersion() const
         ESP_LOGE(TAG, "Error: Firmware version data invalid.");
         return version;
     }
-    StaticJsonBuffer<bufferSize> jsonBuffer;
+    StaticJsonDocument<bufferSize> doc;
+
+    DeserializationError err = deserializeJson(doc, jsonResult.c_str());
 
-    JsonObject &root = jsonBuffer.parseObject(jsonResult.c_str());
     // Check for errors in parsing
-    if (!root.success())
+    if (err)
     {
         ESP_LOGE(TAG, "Error: Firmware version data not found.");
         return version;
     }
-    return root.get<String>("name");
+    return doc["name"].as<String>();
 }
 
 String BintrayClient::getBinaryPath(const String &version) const
@@ -137,14 +138,15 @@ String BintrayClient::getBinaryPath(const String &version) const
         ESP_LOGE(TAG, "Error: Firmware download path data invalid.");
         return path;
     }
-    StaticJsonBuffer<bufferSize> jsonBuffer;
+    StaticJsonDocument<bufferSize> doc;
 
-    JsonArray &root = jsonBuffer.parseArray(jsonResult.c_str());
+    DeserializationError err = deserializeJson(doc, jsonResult.c_str());
-    JsonObject &firstItem = root[0];
+
-    if (!root.success())
+    JsonObject firstItem = doc[0];
+    if (err)
     { //Check for errors in parsing
         ESP_LOGE(TAG, "Error: Firmware download path not found.");
         return path;
     }
-    return "/" + getUser() + "/" + getRepository() + "/" + firstItem.get<String>("path");
+    return "/" + getUser() + "/" + getRepository() + "/" + firstItem["path"].as<String>();
 }

platformio_orig.ini

@@ -1,5 +1,5 @@
 ; PlatformIO Project Configuration File
-; NOTE: PlatformIO v4 is needed!
+; NOTE: PlatformIO v5 is needed!
 ;
 ; Please visit documentation for the other options and examples
 ; http://docs.platformio.org/page/projectconf.html
@@ -7,7 +7,7 @@
 
 ; ---> SELECT THE TARGET PLATFORM HERE! <---
 [board]
-halfile = generic.h
+;halfile = generic.h
 ;halfile = ebox.h
 ;halfile = eboxtube.h
 ;halfile = ecopower.h
@@ -47,7 +47,7 @@ description = Paxcounter is a device for metering passenger flows in realtime. I
 
 [common]
 ; for release_version use max. 10 chars total, use any decimal format like "a.b.c"
-release_version = 2.0.4
+release_version = 2.1.1
 ; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
 ; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
 debug_level = 3
@@ -55,17 +55,17 @@ extra_scripts = pre:build.py
 otakeyfile = ota.conf
 lorakeyfile = loraconf.h
 lmicconfigfile = lmic_config.h
-platform_espressif32 = espressif32@2.0.0
+platform_espressif32 = espressif32@2.1.0
 monitor_speed = 115200
 upload_speed = 115200 ; set by build.py and taken from hal file
 display_library = ; set by build.py and taken from hal file
 lib_deps_lora =
-    mcci-catena/MCCI LoRaWAN LMIC library @ ^3.2.0
+    mcci-catena/MCCI LoRaWAN LMIC library @ ^3.3.0
 lib_deps_display =
     bitbank2/OneBitDisplay @ 1.9.0
     bitbank2/BitBang_I2C @ ^2.1.3
     ricmoo/QRCode @ ^0.0.1
-    bodmer/TFT_eSPI @ ^2.2.20
+    bodmer/TFT_eSPI @ ^2.3.51
 lib_deps_ledmatrix =
     seeed-studio/Ultrathin_LED_Matrix @ ^1.0.0
 lib_deps_rgbled =
@@ -76,10 +76,11 @@ lib_deps_sensors =
     adafruit/Adafruit Unified Sensor @ ^1.1.4
     adafruit/Adafruit BME280 Library @ ^2.1.1
     adafruit/Adafruit BMP085 Library @ ^1.1.0
-    boschsensortec/BSEC Software Library @ 1.5.1474
+    boschsensortec/BSEC Software Library @ 1.6.1480
     https://github.com/ricki-z/SDS011.git
 lib_deps_basic =
-    bblanchon/ArduinoJson @ <6
+    https://github.com/SukkoPera/Arduino-Rokkit-Hash.git
+    bblanchon/ArduinoJson @ ^6
     jchristensen/Timezone @ ^1.2.4
     makuna/RTC @ ^2.3.5
     spacehuhn/SimpleButton 
@@ -116,7 +117,7 @@ framework = arduino
 board = esp32dev
 board_build.partitions = min_spiffs.csv
 upload_speed = ${common.upload_speed}
-;upload_port = COM8
+;upload_port = COM3
 platform = ${common.platform_espressif32}
 lib_deps = ${common.lib_deps_all}
 build_flags = ${common.build_flags_all}
@@ -135,4 +136,3 @@ upload_protocol = esptool
 upload_protocol = esptool
 build_type = debug
 platform = https://github.com/platformio/platform-espressif32.git#develop
-platform_packages = framework-arduinoespressif32 @ https://github.com/espressif/arduino-esp32.git

src/Node-RED/MQTT.json

@@ -0,0 +1,467 @@
+[
+    {
+        "id": "7bc3eb4f.fe4b64",
+        "type": "mqtt in",
+        "z": "c26229c6.2d1ae8",
+        "name": "Olimex",
+        "topic": "paxout/#",
+        "qos": "2",
+        "datatype": "utf8",
+        "broker": "bd56b04d.db0ff",
+        "x": 190,
+        "y": 160,
+        "wires": [
+            [
+                "d0276db6.83c46"
+            ]
+        ]
+    },
+    {
+        "id": "4f59740b.296b7c",
+        "type": "debug",
+        "z": "c26229c6.2d1ae8",
+        "name": "data",
+        "active": true,
+        "tosidebar": true,
+        "console": false,
+        "tostatus": false,
+        "complete": "payload",
+        "targetType": "msg",
+        "statusVal": "",
+        "statusType": "auto",
+        "x": 1050,
+        "y": 280,
+        "wires": []
+    },
+    {
+        "id": "f10f8199.25183",
+        "type": "binary",
+        "z": "c26229c6.2d1ae8",
+        "name": "wifi",
+        "property": "payload",
+        "pattern": "l16, x16",
+        "x": 630,
+        "y": 100,
+        "wires": [
+            [
+                "800f5faa.15155"
+            ]
+        ]
+    },
+    {
+        "id": "df4bdce5.dc219",
+        "type": "switch",
+        "z": "c26229c6.2d1ae8",
+        "name": "Ports",
+        "property": "topic",
+        "propertyType": "msg",
+        "rules": [
+            {
+                "t": "eq",
+                "v": "paxout/1",
+                "vt": "str"
+            },
+            {
+                "t": "eq",
+                "v": "paxout/2",
+                "vt": "str"
+            },
+            {
+                "t": "eq",
+                "v": "paxout/3",
+                "vt": "str"
+            },
+            {
+                "t": "eq",
+                "v": "paxout/4",
+                "vt": "str"
+            },
+            {
+                "t": "eq",
+                "v": "paxout/5",
+                "vt": "str"
+            },
+            {
+                "t": "eq",
+                "v": "paxout/6",
+                "vt": "str"
+            },
+            {
+                "t": "eq",
+                "v": "paxout/7",
+                "vt": "str"
+            },
+            {
+                "t": "eq",
+                "v": "paxout/8",
+                "vt": "str"
+            },
+            {
+                "t": "eq",
+                "v": "paxout/9",
+                "vt": "str"
+            },
+            {
+                "t": "eq",
+                "v": "paxout/10",
+                "vt": "str"
+            },
+            {
+                "t": "eq",
+                "v": "status",
+                "vt": "str"
+            }
+        ],
+        "checkall": "true",
+        "repair": false,
+        "outputs": 11,
+        "x": 370,
+        "y": 260,
+        "wires": [
+            [
+                "f10f8199.25183"
+            ],
+            [
+                "e2974f79.55d5b"
+            ],
+            [
+                "5f6987dd.b89378"
+            ],
+            [],
+            [
+                "eaca83c4.5fcaf"
+            ],
+            [],
+            [],
+            [
+                "7b6cbc9d.18fe44"
+            ],
+            [
+                "d269537.4738fb"
+            ],
+            [
+                "409e4762.71ff68"
+            ],
+            [
+                "13fbfc5d.40dcc4"
+            ]
+        ]
+    },
+    {
+        "id": "eaca83c4.5fcaf",
+        "type": "binary",
+        "z": "c26229c6.2d1ae8",
+        "name": "button",
+        "property": "payload",
+        "pattern": "b8  => button",
+        "x": 630,
+        "y": 280,
+        "wires": [
+            [
+                "a6037445.eb8ac8"
+            ]
+        ]
+    },
+    {
+        "id": "409e4762.71ff68",
+        "type": "binary",
+        "z": "c26229c6.2d1ae8",
+        "name": "cwa",
+        "property": "payload",
+        "pattern": "l16  => cwa",
+        "x": 630,
+        "y": 140,
+        "wires": [
+            [
+                "2966fd1c.0b33d2"
+            ]
+        ]
+    },
+    {
+        "id": "d0276db6.83c46",
+        "type": "base64",
+        "z": "c26229c6.2d1ae8",
+        "name": "Decode",
+        "action": "",
+        "property": "payload",
+        "x": 200,
+        "y": 260,
+        "wires": [
+            [
+                "df4bdce5.dc219"
+            ]
+        ]
+    },
+    {
+        "id": "13fbfc5d.40dcc4",
+        "type": "binary",
+        "z": "c26229c6.2d1ae8",
+        "name": "Connection",
+        "property": "payload",
+        "pattern": "b8[19]|str(\"ascii\")",
+        "x": 650,
+        "y": 440,
+        "wires": [
+            [
+                "4f59740b.296b7c"
+            ]
+        ]
+    },
+    {
+        "id": "800f5faa.15155",
+        "type": "ui_chart",
+        "z": "c26229c6.2d1ae8",
+        "name": "pax",
+        "group": "6838565d.06bf08",
+        "order": 1,
+        "width": 0,
+        "height": 0,
+        "label": "Pax [Wifi]",
+        "chartType": "line",
+        "legend": "false",
+        "xformat": "dd HH:mm",
+        "interpolate": "linear",
+        "nodata": "Noch keine Daten",
+        "dot": false,
+        "ymin": "",
+        "ymax": "",
+        "removeOlder": 1,
+        "removeOlderPoints": "",
+        "removeOlderUnit": "3600",
+        "cutout": 0,
+        "useOneColor": false,
+        "useUTC": false,
+        "colors": [
+            "#1f77b4",
+            "#aec7e8",
+            "#ff7f0e",
+            "#2ca02c",
+            "#98df8a",
+            "#d62728",
+            "#ff9896",
+            "#9467bd",
+            "#c5b0d5"
+        ],
+        "outputs": 1,
+        "x": 810,
+        "y": 100,
+        "wires": [
+            []
+        ]
+    },
+    {
+        "id": "2966fd1c.0b33d2",
+        "type": "ui_chart",
+        "z": "c26229c6.2d1ae8",
+        "name": "cwa",
+        "group": "6838565d.06bf08",
+        "order": 1,
+        "width": 0,
+        "height": 0,
+        "label": "CWA",
+        "chartType": "line",
+        "legend": "false",
+        "xformat": "dd HH:mm",
+        "interpolate": "linear",
+        "nodata": "",
+        "dot": false,
+        "ymin": "",
+        "ymax": "",
+        "removeOlder": 1,
+        "removeOlderPoints": "",
+        "removeOlderUnit": "3600",
+        "cutout": 0,
+        "useOneColor": false,
+        "useUTC": false,
+        "colors": [
+            "#1f77b4",
+            "#aec7e8",
+            "#ff7f0e",
+            "#2ca02c",
+            "#98df8a",
+            "#d62728",
+            "#ff9896",
+            "#9467bd",
+            "#c5b0d5"
+        ],
+        "outputs": 1,
+        "x": 810,
+        "y": 140,
+        "wires": [
+            []
+        ]
+    },
+    {
+        "id": "a6037445.eb8ac8",
+        "type": "ui_toast",
+        "z": "c26229c6.2d1ae8",
+        "position": "top right",
+        "displayTime": "3",
+        "highlight": "",
+        "sendall": true,
+        "outputs": 0,
+        "ok": "OK",
+        "cancel": "",
+        "raw": false,
+        "topic": "Button",
+        "name": "Popup",
+        "x": 810,
+        "y": 280,
+        "wires": []
+    },
+    {
+        "id": "b4478f8.f8b747",
+        "type": "mqtt out",
+        "z": "c26229c6.2d1ae8",
+        "name": "Olimex",
+        "topic": "paxin",
+        "qos": "",
+        "retain": "",
+        "broker": "bd56b04d.db0ff",
+        "x": 190,
+        "y": 480,
+        "wires": []
+    },
+    {
+        "id": "e2974f79.55d5b",
+        "type": "binary",
+        "z": "c26229c6.2d1ae8",
+        "name": "device status",
+        "property": "payload",
+        "pattern": "l16 => voltage,\nl64 => uptime,\nb8 => temperature,\nl32 => ram,\nb8 => reset0,\nb8 => reset1",
+        "x": 650,
+        "y": 200,
+        "wires": [
+            [
+                "4f59740b.296b7c"
+            ]
+        ]
+    },
+    {
+        "id": "5f6987dd.b89378",
+        "type": "binary",
+        "z": "c26229c6.2d1ae8",
+        "name": "device config",
+        "property": "payload",
+        "pattern": "b8 => loradr,\nb8 => txPower,\nl16 => rssilimit,\nb8 => sendcycle,\nb8 => wifichancycle,\nb8 => blescantime,\nb8 => rgblum,\nb8 => configmask,\nb8 => payloadmask,\nb8z|str(\"ascii\") => version",
+        "x": 650,
+        "y": 240,
+        "wires": [
+            [
+                "4f59740b.296b7c"
+            ]
+        ]
+    },
+    {
+        "id": "7b6cbc9d.18fe44",
+        "type": "binary",
+        "z": "c26229c6.2d1ae8",
+        "name": "battery",
+        "property": "payload",
+        "pattern": "l16  => voltage",
+        "x": 630,
+        "y": 360,
+        "wires": [
+            [
+                "4f59740b.296b7c"
+            ]
+        ]
+    },
+    {
+        "id": "d269537.4738fb",
+        "type": "binary",
+        "z": "c26229c6.2d1ae8",
+        "name": "time",
+        "property": "payload",
+        "pattern": "l32  => unixtime",
+        "x": 630,
+        "y": 400,
+        "wires": [
+            [
+                "4f59740b.296b7c"
+            ]
+        ]
+    },
+    {
+        "id": "ce0cb32b.b7b96",
+        "type": "base64",
+        "z": "c26229c6.2d1ae8",
+        "name": "Encode",
+        "action": "",
+        "property": "payload",
+        "x": 200,
+        "y": 420,
+        "wires": [
+            [
+                "b4478f8.f8b747"
+            ]
+        ]
+    },
+    {
+        "id": "c246a129.eeb5e",
+        "type": "inject",
+        "z": "c26229c6.2d1ae8",
+        "name": "rcmd",
+        "props": [
+            {
+                "p": "payload"
+            },
+            {
+                "p": "topic",
+                "vt": "str"
+            }
+        ],
+        "repeat": "",
+        "crontab": "",
+        "once": false,
+        "onceDelay": 0.1,
+        "topic": "paxin",
+        "payload": "[128, 129]",
+        "payloadType": "bin",
+        "x": 190,
+        "y": 360,
+        "wires": [
+            [
+                "ce0cb32b.b7b96"
+            ]
+        ]
+    },
+    {
+        "id": "bd56b04d.db0ff",
+        "type": "mqtt-broker",
+        "name": "Shiftr.io",
+        "broker": "public.cloud.shiftr.io",
+        "port": "1883",
+        "clientid": "",
+        "usetls": false,
+        "compatmode": false,
+        "keepalive": "60",
+        "cleansession": true,
+        "birthTopic": "paxout/status",
+        "birthQos": "0",
+        "birthPayload": "on",
+        "closeTopic": "paxout/status",
+        "closeQos": "0",
+        "closePayload": "off",
+        "willTopic": "paxout/status",
+        "willQos": "0",
+        "willPayload": "unknown"
+    },
+    {
+        "id": "6838565d.06bf08",
+        "type": "ui_group",
+        "name": "MQTT",
+        "tab": "ad5894fa.466c58",
+        "order": 1,
+        "disp": true,
+        "width": "6",
+        "collapse": false
+    },
+    {
+        "id": "ad5894fa.466c58",
+        "type": "ui_tab",
+        "name": "Paxcounter",
+        "icon": "people",
+        "order": 4
+    }
+]

src/blecsan.cpp

@@ -128,7 +128,7 @@ IRAM_ATTR void gap_callback_handler(esp_gap_ble_cb_event_t event,
   switch (event) {
   case ESP_GAP_BLE_SCAN_PARAM_SET_COMPLETE_EVT:
     // restart scan
-    ESP_ERROR_CHECK(esp_ble_gap_start_scanning(BLESCANTIME));
+    esp_ble_gap_start_scanning(BLESCANTIME);
     break;
 
   case ESP_GAP_BLE_SCAN_RESULT_EVT:
@@ -136,7 +136,7 @@ IRAM_ATTR void gap_callback_handler(esp_gap_ble_cb_event_t event,
     if (p->scan_rst.search_evt ==
         ESP_GAP_SEARCH_INQ_CMPL_EVT) // Inquiry complete, scan is done
     {                                // restart scan
-      ESP_ERROR_CHECK(esp_ble_gap_start_scanning(BLESCANTIME));
+      esp_ble_gap_start_scanning(BLESCANTIME);
       return;
     }
 
@@ -151,7 +151,7 @@ IRAM_ATTR void gap_callback_handler(esp_gap_ble_cb_event_t event,
       ESP_LOGV(TAG, "RSSI                : %d", p->scan_rst.rssi);
 #endif
 
-#if (VENDORFILTER)
+#if (MACFILTER)
       if ((p->scan_rst.ble_addr_type == BLE_ADDR_TYPE_RANDOM) ||
           (p->scan_rst.ble_addr_type == BLE_ADDR_TYPE_RPA_RANDOM)) {
 #ifdef VERBOSE
@@ -176,7 +176,7 @@ IRAM_ATTR void gap_callback_handler(esp_gap_ble_cb_event_t event,
       mac_add((uint8_t *)p->scan_rst.bda, p->scan_rst.rssi, MAC_SNIFF_BLE);
 #endif
 
-      /* to be improved in vendorfilter if:
+      /* to be improved in macfilter:
       // you can search for elements in the payload using the
       // function esp_ble_resolve_adv_data()
       //
@@ -187,7 +187,7 @@ IRAM_ATTR void gap_callback_handler(esp_gap_ble_cb_event_t event,
       ESP_BLE_AD_TYPE_NAME_CMPL, &len);
 
       filter BLE devices using their advertisements to get filter alternative
-      to vendor OUI if vendorfiltering is on, we ...
+      to vendor OUI if macfiltering is on, we ...
       - want to count: mobile phones and tablets
       - don't want to count: beacons, peripherals (earphones, headsets,
       printers), cars and machines see
@@ -214,35 +214,53 @@ IRAM_ATTR void gap_callback_handler(esp_gap_ble_cb_event_t event,
   } // switch
 } // gap_callback_handler
 
-esp_err_t register_ble_callback(void) {
+esp_err_t register_ble_callback(bool unregister = false) {
-  ESP_LOGI(TAG, "Register GAP callback");
 
-  // This function is called when gap event occurs, such as scan result.
+  if (unregister) {
-  // register the scan callback function to the gap module
-  ESP_ERROR_CHECK(esp_ble_gap_register_callback(&gap_callback_handler));
 
-  static esp_ble_scan_params_t ble_scan_params = {
+    ESP_LOGI(TAG, "Unregister GAP callback...");
-    .scan_type = BLE_SCAN_TYPE_PASSIVE,
+    esp_ble_gap_stop_scanning();
-    .own_addr_type = BLE_ADDR_TYPE_RANDOM,
+    esp_ble_gap_register_callback(NULL);
 
-#if (VENDORFILTER)
+  }
-    .scan_filter_policy = BLE_SCAN_FILTER_ALLOW_WLIST_PRA_DIR,
-  // ADV_IND, ADV_NONCONN_IND, ADV_SCAN_IND packets are used for broadcasting
-  // data in broadcast applications (e.g., Beacons), so we don't want them in
-  // vendorfilter mode
-#else
-    .scan_filter_policy = BLE_SCAN_FILTER_ALLOW_ALL,
-#endif
 
-    .scan_interval =
+  else {
-        (uint16_t)(cfg.blescantime * 10 / 0.625),    // Time = N * 0.625 msec
-    .scan_window = (uint16_t)(BLESCANWINDOW / 0.625) // Time = N * 0.625 msec
-  };
 
-  ESP_LOGI(TAG, "Set GAP scan parameters");
+    ESP_LOGI(TAG, "Register GAP callback...");
 
-  // This function is called to set scan parameters.
+    // This function is called when gap event occurs, such as scan result.
-  ESP_ERROR_CHECK(esp_ble_gap_set_scan_params(&ble_scan_params));
+    // register the scan callback function to the gap module
+    esp_ble_gap_register_callback(&gap_callback_handler);
+
+    static esp_ble_scan_params_t ble_scan_params = {
+        .scan_type = BLE_SCAN_TYPE_PASSIVE,
+        .own_addr_type = BLE_ADDR_TYPE_RANDOM,
+        .scan_filter_policy = BLE_SCAN_FILTER_ALLOW_ALL,
+
+        /*
+                #if (MACFILTER)
+                      .scan_filter_policy = BLE_SCAN_FILTER_ALLOW_WLIST_PRA_DIR,
+                    // ADV_IND, ADV_NONCONN_IND, ADV_SCAN_IND packets are used
+           for broadcasting
+                    // data in broadcast applications (e.g., Beacons), so we
+           don't want them in
+                    // macfilter mode
+                #else
+                      .scan_filter_policy = BLE_SCAN_FILTER_ALLOW_ALL,
+                #endif
+        */
+
+        .scan_interval =
+            (uint16_t)(cfg.blescantime * 10 / 0.625), // Time = N * 0.625 msec
+        .scan_window =
+            (uint16_t)(BLESCANWINDOW / 0.625), // Time = N * 0.625 msec
+        .scan_duplicate = BLE_SCAN_DUPLICATE_ENABLE};
+
+    ESP_LOGI(TAG, "Set GAP scan parameters");
+
+    // This function is called to set scan parameters.
+    esp_ble_gap_set_scan_params(&ble_scan_params);
+  }
 
   return ESP_OK;
 
@@ -251,29 +269,34 @@ esp_err_t register_ble_callback(void) {
 void start_BLEscan(void) {
 #if (BLECOUNTER)
   ESP_LOGI(TAG, "Initializing bluetooth scanner ...");
-
   // Initialize BT controller to allocate task and other resource.
-  ESP_ERROR_CHECK(esp_coex_preference_set(ESP_COEX_PREFER_BT));
+  if (btStart()) { // enable bt_controller
-
+    esp_coex_preference_set(ESP_COEX_PREFER_BT);
-  btStart();
+    esp_bluedroid_init();
-  ESP_ERROR_CHECK(esp_bluedroid_init());
+    esp_bluedroid_enable();
-  ESP_ERROR_CHECK(esp_bluedroid_enable());
+    // Register callback function for capturing bluetooth packets
-
+    register_ble_callback(false);
-  // Register callback function for capturing bluetooth packets
+    ESP_LOGI(TAG, "Bluetooth scanner started");
-  ESP_ERROR_CHECK(register_ble_callback());
+  } else {
-
+    ESP_LOGE(TAG, "Bluetooth controller start failed. Resetting device");
-  ESP_LOGI(TAG, "Bluetooth scanner started");
+    do_reset(true);
+  }
 #endif // BLECOUNTER
 } // start_BLEscan
 
 void stop_BLEscan(void) {
 #if (BLECOUNTER)
   ESP_LOGI(TAG, "Shutting down bluetooth scanner ...");
-  ESP_ERROR_CHECK(esp_ble_gap_register_callback(NULL));
+  register_ble_callback(true); // unregister capture function
-  ESP_ERROR_CHECK(esp_bluedroid_disable());
+  ESP_LOGD(TAG, "bluedroid disable...");
-  ESP_ERROR_CHECK(esp_bluedroid_deinit());
+  esp_bluedroid_disable();
-  btStop(); // disable bt_controller
+  ESP_LOGD(TAG, "bluedroid deinit...");
-  ESP_ERROR_CHECK(esp_coex_preference_set(ESP_COEX_PREFER_WIFI));
+  esp_bluedroid_deinit();
+  if (!btStop()) { // disable bt_controller
+    ESP_LOGE(TAG, "Bluetooth controller stop failed. Resetting device");
+    do_reset(true);
+  }
+  esp_coex_preference_set(ESP_COEX_PREFER_WIFI);
   ESP_LOGI(TAG, "Bluetooth scanner stopped");
 #endif // BLECOUNTER
 } // stop_BLEscan

src/bmesensor.cpp

@@ -5,7 +5,7 @@
 // Local logging tag
 static const char TAG[] = __FILE__;
 
-bmeStatus_t bme_status = {0};
+bmeStatus_t bme_status = {0, 0, 0, 0, 0, 0, 0, 0};
 
 Ticker bmecycler;
 
@@ -26,7 +26,6 @@ bsec_virtual_sensor_t sensorList[10] = {
 };
 
 uint8_t bsecstate_buffer[BSEC_MAX_STATE_BLOB_SIZE] = {0};
-uint16_t stateUpdateCounter = 0;
 
 Bsec iaqSensor;
 
@@ -47,10 +46,10 @@ Adafruit_BMP085 bmp; // I2C
 void setBMEIRQ() { xTaskNotify(irqHandlerTask, BME_IRQ, eSetBits); }
 
 // initialize MEMS sensor
+// return = 0 -> error / return = 1 -> success
 int bme_init(void) {
 
-  // return = 0 -> error / return = 1 -> success
+  int rc = 0;
-  int rc = 1;
 
 #ifdef HAS_BME680
   // block i2c bus access
@@ -64,76 +63,33 @@ int bme_init(void) {
              iaqSensor.version.minor_bugfix);
 
     iaqSensor.setConfig(bsec_config_iaq);
-
-    if (checkIaqSensorStatus())
-      ESP_LOGI(TAG, "BME680 sensor found and initialized");
-    else {
-      ESP_LOGE(TAG, "BME680 sensor not found");
-      rc = 0;
-      goto finish;
-    }
-
     loadState();
-
     iaqSensor.setTemperatureOffset((float)BME_TEMP_OFFSET);
     iaqSensor.updateSubscription(sensorList, 10, BSEC_SAMPLE_RATE_LP);
 
-    if (checkIaqSensorStatus())
+    rc = checkIaqSensorStatus();
-      ESP_LOGI(TAG, "BSEC subscription succesful");
+
-    else {
+  } else
-      ESP_LOGE(TAG, "BSEC subscription error");
-      rc = 0;
-      goto finish;
-    }
-  } else {
     ESP_LOGE(TAG, "I2c bus busy - BME680 initialization error");
-    rc = 0;
-    goto finish;
-  }
 
 #elif defined HAS_BME280
-
-  bool status;
-
-  // block i2c bus access
   if (I2C_MUTEX_LOCK()) {
-
+    rc = bme.begin(BME280_ADDR);
-    status = bme.begin(BME280_ADDR);
+  } else
-    if (!status) {
-      ESP_LOGE(TAG, "BME280 sensor not found");
-      rc = 0;
-      goto finish;
-    }
-    ESP_LOGI(TAG, "BME280 sensor found and initialized");
-  } else {
     ESP_LOGE(TAG, "I2c bus busy - BME280 initialization error");
-    rc = 0;
-    goto finish;
-  }
 
 #elif defined HAS_BMP180
-  bool status;
-  // block i2c bus access
   if (I2C_MUTEX_LOCK()) {
     // Wire.begin(21, 22);
-    status = bmp.begin();
+    rc = bmp.begin();
-    if (!status) {
+  } else
-      ESP_LOGE(TAG, "BMP180 sensor not found");
-      rc = 0;
-      goto finish;
-    }
-    ESP_LOGI(TAG, "BMP180 sensor found and initialized");
-  } else {
     ESP_LOGE(TAG, "I2c bus busy - BMP180 initialization error");
-    rc = 0;
+
-    goto finish;
-  }
 #endif
 
-finish:
   I2C_MUTEX_UNLOCK(); // release i2c bus access
   if (rc)
-    bmecycler.attach(BMECYCLE, setBMEIRQ);
+    bmecycler.attach(BMECYCLE, setBMEIRQ); // start cyclic data transmit
   return rc;
 
 } // bme_init()
@@ -218,6 +174,7 @@ void loadState(void) {
 
 void updateState(void) {
   bool update = false;
+  static uint16_t stateUpdateCounter = 0;
 
   if (stateUpdateCounter == 0) {
     // first state update when IAQ accuracy is >= 1
@@ -228,7 +185,7 @@ void updateState(void) {
   } else {
 
     /* Update every STATE_SAVE_PERIOD minutes */
-    if ((stateUpdateCounter * STATE_SAVE_PERIOD) < _millis()) {
+    if ((long)(millis() - stateUpdateCounter * STATE_SAVE_PERIOD) >= 0) {
       update = true;
       stateUpdateCounter++;
     }

src/button.cpp

@@ -33,7 +33,7 @@ void button_init(int pin) {
   b->setOnHolding([]() {
     payload.reset();
     payload.addButton(0x01);
-    SendPayload(BUTTONPORT, prio_normal);
+    SendPayload(BUTTONPORT);
   });
 
   // attach interrupt to the button

src/configmanager.cpp

@@ -42,19 +42,20 @@ static void defaultConfig(configData_t *myconfig) {
       COUNTERMODE;                 // 0=cyclic, 1=cumulative, 2=cyclic confirmed
   myconfig->rssilimit = 0;         // threshold for rssilimiter, negative value!
   myconfig->sendcycle = SENDCYCLE; // payload send cycle [seconds/2]
+  myconfig->sleepcycle = SLEEPCYCLE; // sleep cycle [seconds/2]
   myconfig->wifichancycle =
       WIFI_CHANNEL_SWITCH_INTERVAL; // wifi channel switch cycle [seconds/100]
   myconfig->blescantime =
       BLESCANINTERVAL /
       10; // BT channel scan cycle [seconds/100], default 1 (= 10ms)
-  myconfig->blescan = 1;  // 0=disabled, 1=enabled
+  myconfig->blescan = 1;            // 0=disabled, 1=enabled
-  myconfig->wifiscan = 1; // 0=disabled, 1=enabled
+  myconfig->wifiscan = 1;           // 0=disabled, 1=enabled
-  myconfig->wifiant = 0;  // 0=internal, 1=external (for LoPy/LoPy4)
+  myconfig->wifiant = 0;            // 0=internal, 1=external (for LoPy/LoPy4)
-  myconfig->vendorfilter = VENDORFILTER; // 0=disabled, 1=enabled
+  myconfig->macfilter = MACFILTER;  // 0=disabled, 1=enabled
-  myconfig->rgblum = RGBLUMINOSITY;      // RGB Led luminosity (0..100%)
+  myconfig->rgblum = RGBLUMINOSITY; // RGB Led luminosity (0..100%)
-  myconfig->monitormode = 0;             // 0=disabled, 1=enabled
+  myconfig->monitormode = 0;        // 0=disabled, 1=enabled
-  myconfig->payloadmask = PAYLOADMASK;   // payloads as defined in default 
+  myconfig->payloadmask = PAYLOADMASK; // payloads as defined in default
-  myconfig->enscount = COUNT_ENS;        // 0=disabled, 1=enabled
+  myconfig->enscount = COUNT_ENS;      // 0=disabled, 1=enabled
 
 #ifdef HAS_BME680
   // initial BSEC state for BME680 sensor

src/corona.cpp

@@ -5,6 +5,10 @@
 // (c) by Kaspar Metz
 // modified for use in the Paxcounter by AQ
 
+#if (COUNT_ENS) && !(BLECOUNTER)
+#warning ENS-Counter needs Bluetooth, but Bluetooth compile option is disabled
+#endif
+
 #if (COUNT_ENS)
 
 // Local logging tag
@@ -44,7 +48,7 @@ bool cwa_init(void) {
 }
 
 void cwa_mac_add(uint16_t hashedmac) {
-  cwaSeenNotifiers[hashedmac] = _millis(); // hash last seen at ....
+  cwaSeenNotifiers[hashedmac] = millis(); // hash last seen at ....
 }
 
 #endif

src/cyclic.cpp

@@ -14,24 +14,15 @@ extern boolean isSDS011Active;
 #endif
 
 void setCyclicIRQ() {
-  xTaskNotifyFromISR(irqHandlerTask, CYCLIC_IRQ, eSetBits, NULL);
+  xTaskNotify(irqHandlerTask, CYCLIC_IRQ, eSetBits);
 }
 
 // do all housekeeping
 void doHousekeeping() {
 
-  // update uptime counter
+  // check if update mode trigger switch was set by rcommand
-  uptime();
+  if (RTC_runmode == RUNMODE_UPDATE)
-  // check if update mode trigger switch was set
+    do_reset(true);
-  if (RTC_runmode == RUNMODE_UPDATE) {
-    // check battery status if we can before doing ota
-    if (batt_sufficient()) {
-      do_reset(true); // warmstart to runmode update
-    } else {
-      ESP_LOGE(TAG, "Battery level %d%% is too low for OTA", batt_level);
-      RTC_runmode = RUNMODE_NORMAL; // keep running in normal mode
-    }
-  }
 
   // heap and task storage debugging
   ESP_LOGD(TAG, "Heap: Free:%d, Min:%d, Size:%d, Alloc:%d, StackHWM:%d",
@@ -43,6 +34,8 @@ void doHousekeeping() {
   ESP_LOGD(TAG, "MACprocessor %d bytes left | Taskstate = %d",
            uxTaskGetStackHighWaterMark(macProcessTask),
            eTaskGetState(macProcessTask));
+  ESP_LOGD(TAG, "Rcommand interpreter %d bytes left | Taskstate = %d",
+           uxTaskGetStackHighWaterMark(rcmdTask), eTaskGetState(rcmdTask));
 #if (HAS_LORA)
   ESP_LOGD(TAG, "LMiCtask %d bytes left | Taskstate = %d",
            uxTaskGetStackHighWaterMark(lmicTask), eTaskGetState(lmicTask));
@@ -106,7 +99,6 @@ void doHousekeeping() {
              "free heap = %d bytes)",
              ESP.getMinFreeHeap(), ESP.getFreeHeap());
     reset_counters(); // clear macs container and reset all counters
-    get_salt();       // get new salt for salting hashes
 
     if (ESP.getMinFreeHeap() <= MEM_LOW) // check again
       do_reset(true);                    // memory leak, reset device
@@ -117,7 +109,6 @@ void doHousekeeping() {
   if (ESP.getMinFreePsram() <= MEM_LOW) {
     ESP_LOGI(TAG, "PSRAM full, counter cleared");
     reset_counters(); // clear macs container and reset all counters
-    get_salt();       // get new salt for salting hashes
 
     if (ESP.getMinFreePsram() <= MEM_LOW) // check again
       do_reset(true);                     // memory leak, reset device
@@ -136,8 +127,6 @@ void doHousekeeping() {
 
 } // doHousekeeping()
 
-uint64_t uptime() { return _millis(); }
-
 uint32_t getFreeRAM() {
 #ifndef BOARD_HAS_PSRAM
   return ESP.getFreeHeap();
@@ -151,6 +140,7 @@ void reset_counters() {
   macs.clear(); // clear all macs container
   macs_wifi = 0;
   macs_ble = 0;
+  renew_salt(); // get new salt
 #ifdef HAS_DISPLAY
   dp_plotCurve(0, true);
 #endif

src/display.cpp

@@ -400,7 +400,7 @@ void dp_drawPage(time_t t, bool nextpage) {
                 gps.location.lat());
 
       // line 6-7: GPS longitude
-      dp_printf("%c%07.4f", gps.location.rawLat().negative ? 'W' : 'E',
+      dp_printf("%c%07.4f", gps.location.rawLng().negative ? 'W' : 'E',
                 gps.location.lng());
 
     } else {
@@ -603,7 +603,6 @@ void dp_shutdown(void) {
   if (!I2C_MUTEX_LOCK())
     ESP_LOGV(TAG, "[%0.3f] i2c mutex lock failed", _seconds());
   else {
-    cfg.screenon = 0;
     obdPower(&ssoled, false);
     delay(DISPLAYREFRESH_MS / 1000 * 1.1);
     I2C_MUTEX_UNLOCK(); // release i2c bus access

src/gpsread.cpp

@@ -30,34 +30,27 @@ static uint16_t nmea_txDelay_ms = 0;
 // initialize and configure GPS
 int gps_init(void) {
 
-  int ret = 1;
-
   if (!gps_config()) {
     ESP_LOGE(TAG, "GPS chip initializiation error");
     return 0;
   }
 
 #ifdef GPS_SERIAL
+  ESP_LOGI(TAG, "Opening serial GPS");
   GPS_Serial.begin(GPS_SERIAL);
-  ESP_LOGI(TAG, "Using serial GPS");
 #elif defined GPS_I2C
+  ESP_LOGI(TAG, "Opening I2C GPS");
   Wire.begin(GPS_I2C, 400000); // I2C connect to GPS device with 400 KHz
   Wire.beginTransmission(GPS_ADDR);
-  Wire.write(0x00);             // dummy write
+  Wire.write(0x00); // dummy write
-  ret = Wire.endTransmission(); // check if chip is seen on i2c bus
+  if (Wire.endTransmission()) {
-
+    ESP_LOGE(TAG, "Quectel L76 GPS chip not found");
-  if (ret) {
+    return 0;
-    ESP_LOGE(TAG,
+  } else
-             "Quectel L76 GPS chip not found on i2c bus, bus error %d. "
-             "Stopping GPS-Task.",
-             ret);
-    ret = 0;
-  } else {
     ESP_LOGI(TAG, "Quectel L76 GPS chip found");
-  }
 #endif
 
-  return ret;
+  return 1;
 } // gps_init()
 
 // detect gps chipset type and configure it with device specific settings
@@ -109,7 +102,7 @@ time_t get_gpstime(uint16_t *msec) {
 #endif
 
   // did we get a current date & time?
-  if (gpstime.isValid() && gpsday.isValid()) {
+  if (gpstime.isValid()) {
 
     time_t t = 0;
     tmElements_t tm;

src/hal/lopy4.h

@@ -10,7 +10,6 @@
 // Hardware related definitions for Pycom LoPy4 Board
 
 #define HAS_LORA 1       // comment out if device shall not send data via LoRa
-#define LORA_RST  LMIC_UNUSED_PIN // reset pin of lora chip is not wired von LoPy4
 
 //#defin HAS_SPI 1        // comment out if device shall not send data via SPI
 // pin definitions for local wired SPI slave interface

src/hal/olimexpoeiso.h

@@ -8,15 +8,15 @@
 #include <stdint.h>
 
 // enable only if you want to store a local paxcount table on the device
-#define HAS_SDCARD 2 // this board has a SDMMC card-reader/writer
+//#define HAS_SDCARD 2 // this board has a SDMMC card-reader/writer
 
 // enable only if you want to send paxcount via ethernet port to mqtt server
 #define HAS_MQTT 1  // use MQTT on ethernet interface
 
-//#define BAT_MEASURE_ADC ADC1_GPIO35_CHANNEL // battery probe GPIO pin -> ADC1_CHANNEL_7
+//#define BAT_MEASURE_ADC ADC1_GPIO35_CHANNEL // battery measurement
 //#define BAT_VOLTAGE_DIVIDER 2 // voltage divider 470k/470k on board
-#define BAT_MEASURE_ADC ADC1_GPIO39_CHANNEL // external power probe GPIO pin
+#define BAT_MEASURE_ADC ADC1_GPIO39_CHANNEL // external power sense
-#define BAT_VOLTAGE_DIVIDER 2.1277f // voltage divider 47k/442k on board
+#define BAT_VOLTAGE_DIVIDER 2.1277f // voltage divider 47k/100k on board
 
 #define HAS_BUTTON KEY_BUILTIN // on board button
 #define HAS_LED NOT_A_PIN // no on board LED

src/hal/ttgobeam10.h

@@ -13,10 +13,10 @@ for T-Beam version T22_V10 + T22_V11
 pinouts taken from https://github.com/lewisxhe/TTGO-T-Beam
 
 /// Button functions: ///
-Power, short press -> set device on (toggles display while device is on)
+Power, short press -> set device on / while device is on: goto sleep
-Power, long press -> set device off
+Power, long press   -> set device off
-User, short press -> flip display page 
+User, short press   -> flip display page 
-User, long press -> send LORA message
+User, long press    -> send a button message
 Reset -> reset device
 */
 
@@ -29,7 +29,8 @@ Reset -> reset device
 #define HAS_LORA 1       // comment out if device shall not send data via LoRa
 #define CFG_sx1276_radio 1 // HPD13A LoRa SoC
 #define HAS_BUTTON GPIO_NUM_38 // middle on board button
-#define HAS_LED NOT_A_PIN
+#define HAS_LED GPIO_NUM_4 // not present on all T-Beam 1.0 boards
+#define LED_ACTIVE_LOW 1
 
 // power management settings
 #define HAS_PMU 1 // has AXP192 chip
@@ -41,6 +42,12 @@ Reset -> reset device
 // possible values (V):
 // 4_1/4_15/4_2/4_36
 
+// blue onboard led settings
+// possible values: 
+// AXP20X_LED_OFF / AXP20X_LED_LOW_LEVEL (means LED ON) / AXP20X_LED_BLINK_1HZ / AXP20X_LED_BLINK_4HZ
+#define PMU_LED_RUN_MODE AXP20X_LED_LOW_LEVEL 
+#define PMU_LED_SLEEP_MODE AXP20X_LED_OFF
+
 // GPS settings
 #define HAS_GPS 1 // use on board GPS
 #define GPS_SERIAL 9600, SERIAL_8N1, GPIO_NUM_34, GPIO_NUM_12 // UBlox NEO 6M

src/hash.cpp

@@ -36,52 +36,10 @@
 
 #include "hash.h"
 
-uint32_t IRAM_ATTR rokkit(const char *data, int len) {
+#ifdef ROKKIT_ENABLE_8BIT_OPTIMIZATIONS
-  uint32_t hash, tmp;
+#undef ROKKIT_ENABLE_8BIT_OPTIMIZATIONS
-  int rem;
+#endif
 
-  if (len <= 0 || data == 0)
+uint32_t IRAM_ATTR hash(const char *data, int len) {
-    return 0;
+  return rokkit(data, len);
-  hash = len;
-  rem = len & 3;
-  len >>= 2;
-
-  /* Main loop */
-  while (len > 0) {
-    hash += *((uint16_t *)data);
-    tmp = (*((uint16_t *)(data + 2)) << 11) ^ hash;
-    hash = (hash << 16) ^ tmp;
-    data += 2 * 2;
-    hash += hash >> 11;
-    len--;
-  }
-
-  /* Handle end cases */
-  switch (rem) {
-  case 3:
-    hash += *((uint16_t *)data);
-    hash ^= hash << 16;
-    hash ^= ((signed char)data[2]) << 18;
-    hash += hash >> 11;
-    break;
-  case 2:
-    hash += *((uint16_t *)data);
-    hash ^= hash << 11;
-    hash += hash >> 17;
-    break;
-  case 1:
-    hash += (signed char)*data;
-    hash ^= hash << 10;
-    hash += hash >> 1;
-  }
-
-  /* Force "avalanching" of final 127 bits */
-  hash ^= hash << 3;
-  hash += hash >> 5;
-  hash ^= hash << 4;
-  hash += hash >> 17;
-  hash ^= hash << 25;
-  hash += hash >> 6;
-
-  return hash;
 }

src/i2c.cpp

@@ -7,12 +7,7 @@ static const char TAG[] = __FILE__;
 
 void i2c_init(void) { Wire.begin(MY_DISPLAY_SDA, MY_DISPLAY_SCL, 100000); }
 
-void i2c_deinit(void) {
+void i2c_deinit(void) { Wire.~TwoWire(); }
-  Wire.~TwoWire(); // shutdown/power off I2C hardware
-  // configure pins as input to save power, because Wire.end() enables pullups
-  pinMode(MY_DISPLAY_SDA, INPUT);
-  pinMode(MY_DISPLAY_SCL, INPUT);
-}
 
 void i2c_scan(void) {
 
@@ -38,10 +33,13 @@ void i2c_scan(void) {
 
   BBI2C bbi2c;
 
-  const char *szNames[]  = {"Unknown","SSD1306","SH1106","VL53L0X","BMP180", "BMP280","BME280",
+  const char *szNames[] = {
-                "MPU-60x0", "MPU-9250", "MCP9808","LSM6DS3", "ADXL345", "ADS1115","MAX44009",
+      "Unknown",    "SSD1306",  "SH1106",   "VL53L0X", "BMP180",  "BMP280",
-                "MAG3110", "CCS811", "HTS221", "LPS25H", "LSM9DS1","LM8330", "DS3231", "LIS3DH",
+      "BME280",     "MPU-60x0", "MPU-9250", "MCP9808", "LSM6DS3", "ADXL345",
-                "LIS3DSH","INA219","SHT3X","HDC1080","MPU6886","BME680", "AXP202", "AXP192", "24AA02XEXX", "DS1307"};
+      "ADS1115",    "MAX44009", "MAG3110",  "CCS811",  "HTS221",  "LPS25H",
+      "LSM9DS1",    "LM8330",   "DS3231",   "LIS3DH",  "LIS3DSH", "INA219",
+      "SHT3X",      "HDC1080",  "MPU6886",  "BME680",  "AXP202",  "AXP192",
+      "24AA02XEXX", "DS1307"};
 
   ESP_LOGI(TAG, "Starting I2C bus scan...");
 

src/irqhandler.cpp

@@ -69,14 +69,6 @@ void irqHandler(void *pvParameters) {
     }
 #endif
 
-// MQTT loop due?
-#if (HAS_MQTT)
-    if (InterruptStatus & MQTT_IRQ) {
-      mqtt_loop();
-      InterruptStatus &= ~MQTT_IRQ;
-    }
-#endif
-
     // are cyclic tasks due?
     if (InterruptStatus & CYCLIC_IRQ) {
       doHousekeeping();
@@ -95,6 +87,13 @@ void irqHandler(void *pvParameters) {
     if (InterruptStatus & SENDCYCLE_IRQ) {
       sendData();
       InterruptStatus &= ~SENDCYCLE_IRQ;
+      // goto sleep if we have a sleep cycle
+      if (cfg.sleepcycle)
+#ifdef HAS_BUTTON
+        enter_deepsleep(cfg.sleepcycle * 2, (gpio_num_t)HAS_BUTTON);
+#else
+        enter_deepsleep(cfg.sleepcycle * 2);
+#endif
     }
   } // for
 } // irqHandler()

src/led.cpp

@@ -9,7 +9,7 @@ led_states previousLEDState =
 TaskHandle_t ledLoopTask;
 
 uint16_t LEDColor = COLOR_NONE, LEDBlinkDuration = 0; // state machine variables
-unsigned long LEDBlinkStarted = 0; // When (in _millis() led blink started)
+unsigned long LEDBlinkStarted = 0; // When (in millis() led blink started)
 
 #ifdef HAS_RGB_LED
 
@@ -133,7 +133,7 @@ void blink_LED(uint16_t set_color, uint16_t set_blinkduration) {
 #if (HAS_LED != NOT_A_PIN) || defined(HAS_RGB_LED)
   LEDColor = set_color;                 // set color for RGB LED
   LEDBlinkDuration = set_blinkduration; // duration
-  LEDBlinkStarted = _millis();           // Time Start here
+  LEDBlinkStarted = millis();           // Time Start here
   LEDState = LED_ON;                    // Let main set LED on
 #endif
 }
@@ -145,8 +145,8 @@ void ledLoop(void *parameter) {
     // Custom blink running always have priority other LoRaWAN led
     // management
     if (LEDBlinkStarted && LEDBlinkDuration) {
-      // Custom blink is finished, let this order, avoid _millis() overflow
+      // Custom blink is finished, let this order, avoid millis() overflow
-      if ((_millis() - LEDBlinkStarted) >= LEDBlinkDuration) {
+      if ((long)(millis() - LEDBlinkStarted) >= LEDBlinkDuration) {
         // Led becomes off, and stop blink
         LEDState = LED_OFF;
         LEDBlinkStarted = 0;
@@ -165,7 +165,7 @@ void ledLoop(void *parameter) {
         LEDColor = COLOR_YELLOW;
         // quick blink 20ms on each 1/5 second
         LEDState =
-            ((_millis() % 200) < 20) ? LED_ON : LED_OFF; // TX data pending
+            ((millis() % 200) < 20) ? LED_ON : LED_OFF; // TX data pending
       } else if (LMIC.opmode & (OP_TXDATA | OP_TXRXPEND)) {
         // select color to blink by message port
         switch (LMIC.pendTxPort) {
@@ -180,13 +180,13 @@ void ledLoop(void *parameter) {
           break;
         }
         // small blink 10ms on each 1/2sec (not when joining)
-        LEDState = ((_millis() % 500) < 10) ? LED_ON : LED_OFF;
+        LEDState = ((millis() % 500) < 10) ? LED_ON : LED_OFF;
         // This should not happen so indicate a problem
       } else if (LMIC.opmode &
                  ((OP_TXDATA | OP_TXRXPEND | OP_JOINING | OP_REJOIN) == 0)) {
         LEDColor = COLOR_RED;
         // heartbeat long blink 200ms on each 2 seconds
-        LEDState = ((_millis() % 2000) < 200) ? LED_ON : LED_OFF;
+        LEDState = ((millis() % 2000) < 200) ? LED_ON : LED_OFF;
       } else
 #endif // HAS_LORA
       {

src/lmic_config.h

@@ -18,9 +18,10 @@
 
 // use interrupts only if LORA_IRQ and LORA_DIO are connected to interrupt
 // capable and separate GPIO pins on your board, if not don't enable
-#if (LORA_IRQ) != (LORA_IO1)
+// note: this feature can't be used on ESP32 unless PR #556 of MCCI LMIC was merged
-#define LMIC_USE_INTERRUPTS 1
+//#if (LORA_IRQ) != (LORA_IO1)
-#endif
+//#define LMIC_USE_INTERRUPTS 1
+//#endif
 
 // avoid lmic warning if we don't configure radio in case we haven't one
 #if !(defined(CFG_sx1272_radio) || defined(CFG_sx1276_radio))

src/lorawan.cpp

@@ -6,6 +6,9 @@
 // Local logging Tag
 static const char TAG[] = "lora";
 
+// Saves the LMIC structure during deep sleep
+RTC_DATA_ATTR lmic_t RTC_LMIC;
+
 #if CLOCK_ERROR_PROCENTAGE > 7
 #warning CLOCK_ERROR_PROCENTAGE value in lmic_config.h is too high; values > 7 will cause side effects
 #endif
@@ -16,12 +19,7 @@ static const char TAG[] = "lora";
 #endif
 #endif
 
-// variable keep its values after restart or wakeup from sleep
+static QueueHandle_t LoraSendQueue;
-RTC_NOINIT_ATTR u4_t RTCnetid, RTCdevaddr;
-RTC_NOINIT_ATTR u1_t RTCnwkKey[16], RTCartKey[16];
-RTC_NOINIT_ATTR int RTCseqnoUp, RTCseqnoDn;
-
-QueueHandle_t LoraSendQueue;
 TaskHandle_t lmicTask = NULL, lorasendTask = NULL;
 
 class MyHalConfig_t : public Arduino_LMIC::HalConfiguration_t {
@@ -83,8 +81,6 @@ void lora_setupForNetwork(bool preJoin) {
              getSfName(updr2rps(LMIC.datarate)),
              getBwName(updr2rps(LMIC.datarate)),
              getCrName(updr2rps(LMIC.datarate)));
-    // store LMIC keys and counters in RTC memory
-    LMIC_getSessionKeys(&RTCnetid, &RTCdevaddr, RTCnwkKey, RTCartKey);
   }
 }
 
@@ -110,7 +106,7 @@ breaking change
 // DevEUI generator using devices's MAC address
 void gen_lora_deveui(uint8_t *pdeveui) {
   uint8_t *p = pdeveui, dmac[6];
-  ESP_ERROR_CHECK(esp_efuse_mac_get_default(dmac));
+  esp_efuse_mac_get_default(dmac);
   // deveui is LSB, we reverse it so TTN DEVEUI display
   // will remain the same as MAC address
   // MAC is 6 bytes, devEUI 8, set middle 2 ones
@@ -197,59 +193,47 @@ void lora_send(void *pvParameters) {
     }
 
     // fetch next or wait for payload to send from queue
-    if (xQueueReceive(LoraSendQueue, &SendBuffer, portMAX_DELAY) != pdTRUE) {
+    // do not delete item from queue until it is transmitted
+    if (xQueuePeek(LoraSendQueue, &SendBuffer, portMAX_DELAY) != pdTRUE) {
       ESP_LOGE(TAG, "Premature return from xQueueReceive() with no data!");
       continue;
     }
 
     // attempt to transmit payload
-    else {
+    switch (LMIC_setTxData2_strict(SendBuffer.MessagePort, SendBuffer.Message,
-
+                                   SendBuffer.MessageSize,
-      switch (LMIC_setTxData2_strict(SendBuffer.MessagePort, SendBuffer.Message,
+                                   (cfg.countermode & 0x02))) {
-                                     SendBuffer.MessageSize,
-                                     (cfg.countermode & 0x02))) {
-
-      case LMIC_ERROR_SUCCESS:
-        // save current Fcnt to RTC RAM
-        RTCseqnoUp = LMIC.seqnoUp;
-        RTCseqnoDn = LMIC.seqnoDn;
 
+    case LMIC_ERROR_SUCCESS:
 #if (TIME_SYNC_LORASERVER)
-        // if last packet sent was a timesync request, store TX timestamp
+      // if last packet sent was a timesync request, store TX timestamp
-        if (SendBuffer.MessagePort == TIMEPORT)
+      if (SendBuffer.MessagePort == TIMEPORT)
-          // store LMIC time when we started transmit of timesync request
+        // store LMIC time when we started transmit of timesync request
-          timesync_store(osticks2ms(os_getTime()), timesync_tx);
+        timesync_store(osticks2ms(os_getTime()), timesync_tx);
 #endif
+      ESP_LOGI(TAG, "%d byte(s) sent to LORA", SendBuffer.MessageSize);
+      // delete sent item from queue
+      xQueueReceive(LoraSendQueue, &SendBuffer, (TickType_t)0);
+      break;
+    case LMIC_ERROR_TX_BUSY:   // LMIC already has a tx message pending
+    case LMIC_ERROR_TX_FAILED: // message was not sent
+      vTaskDelay(pdMS_TO_TICKS(500 + random(400))); // wait a while
+      break;
+    case LMIC_ERROR_TX_TOO_LARGE:    // message size exceeds LMIC buffer size
+    case LMIC_ERROR_TX_NOT_FEASIBLE: // message too large for current
+                                     // datarate
+      ESP_LOGI(TAG, "Message too large to send, message not sent and deleted");
+      // we need some kind of error handling here -> to be done
+      break;
+    default: // other LMIC return code
+      ESP_LOGE(TAG, "LMIC error, message not sent and deleted");
 
-        ESP_LOGI(TAG, "%d byte(s) sent to LORA", SendBuffer.MessageSize);
+    }         // switch
-        break;
-      case LMIC_ERROR_TX_BUSY:   // LMIC already has a tx message pending
-      case LMIC_ERROR_TX_FAILED: // message was not sent
-        // ESP_LOGD(TAG, "LMIC busy, message re-enqueued"); // very noisy
-        vTaskDelay(pdMS_TO_TICKS(1000 + random(500))); // wait a while
-        lora_enqueuedata(&SendBuffer); // re-enqueue the undelivered message
-        break;
-      case LMIC_ERROR_TX_TOO_LARGE:    // message size exceeds LMIC buffer size
-      case LMIC_ERROR_TX_NOT_FEASIBLE: // message too large for current
-                                       // datarate
-        ESP_LOGI(TAG,
-                 "Message too large to send, message not sent and deleted");
-        // we need some kind of error handling here -> to be done
-        break;
-      default: // other LMIC return code
-        ESP_LOGE(TAG, "LMIC error, message not sent and deleted");
-
-      } // switch
-    }
     delay(2); // yield to CPU
-  }
+  }           // while(1)
 }
 
-void lora_stack_reset() {
+esp_err_t lmic_init(void) {
-  LMIC_reset(); // reset LMIC MAC
-}
-
-esp_err_t lora_stack_init(bool do_join) {
   _ASSERT(SEND_QUEUE_SIZE > 0);
   LoraSendQueue = xQueueCreate(SEND_QUEUE_SIZE, sizeof(MessageBuffer_t));
   if (LoraSendQueue == 0) {
@@ -259,89 +243,6 @@ esp_err_t lora_stack_init(bool do_join) {
   ESP_LOGI(TAG, "LORA send queue created, size %d Bytes",
            SEND_QUEUE_SIZE * sizeof(MessageBuffer_t));
 
-  // start lorawan stack
-  ESP_LOGI(TAG, "Starting LMIC...");
-  xTaskCreatePinnedToCore(lmictask,   // task function
-                          "lmictask", // name of task
-                          4096,       // stack size of task
-                          (void *)1,  // parameter of the task
-                          2,          // priority of the task
-                          &lmicTask,  // task handle
-                          1);         // CPU core
-
-#ifdef LORA_ABP
-  // Pass ABP parameters to LMIC_setSession
-  lora_stack_reset();
-  uint8_t appskey[sizeof(APPSKEY)];
-  uint8_t nwkskey[sizeof(NWKSKEY)];
-  memcpy_P(appskey, APPSKEY, sizeof(APPSKEY));
-  memcpy_P(nwkskey, NWKSKEY, sizeof(NWKSKEY));
-  LMIC_setSession(NETID, DEVADDR, nwkskey, appskey);
-  // These parameters are defined as macro in loraconf.h
-  setABPParameters();
-#else
-  // Start join procedure if not already joined,
-  // lora_setupForNetwork(true) is called by eventhandler when joined
-  // else continue current session
-  if (do_join) {
-    if (!LMIC_startJoining())
-      ESP_LOGI(TAG, "Already joined");
-  } else {
-    lora_stack_reset();
-    LMIC_setSession(RTCnetid, RTCdevaddr, RTCnwkKey, RTCartKey);
-    LMIC.seqnoUp = RTCseqnoUp;
-    LMIC.seqnoDn = RTCseqnoDn;
-  }
-#endif
-  // start lmic send task
-  xTaskCreatePinnedToCore(lora_send,      // task function
-                          "lorasendtask", // name of task
-                          3072,           // stack size of task
-                          (void *)1,      // parameter of the task
-                          1,              // priority of the task
-                          &lorasendTask,  // task handle
-                          1);             // CPU core
-
-  return ESP_OK;
-}
-
-void lora_enqueuedata(MessageBuffer_t *message) {
-  // enqueue message in LORA send queue
-  BaseType_t ret = pdFALSE;
-  MessageBuffer_t DummyBuffer;
-  sendprio_t prio = message->MessagePrio;
-
-  switch (prio) {
-  case prio_high:
-    // clear some space in queue if full, then fallthrough to prio_normal
-    if (uxQueueSpacesAvailable(LoraSendQueue) == 0) {
-      xQueueReceive(LoraSendQueue, &DummyBuffer, (TickType_t)0);
-      ESP_LOGW(TAG, "LORA sendqueue purged, data is lost");
-    }
-  case prio_normal:
-    ret = xQueueSendToFront(LoraSendQueue, (void *)message, (TickType_t)0);
-    break;
-  case prio_low:
-  default:
-    ret = xQueueSendToBack(LoraSendQueue, (void *)message, (TickType_t)0);
-    break;
-  }
-  if (ret != pdTRUE) {
-    snprintf(lmic_event_msg + 14, LMIC_EVENTMSG_LEN - 14, "<>");
-    ESP_LOGW(TAG, "LORA sendqueue is full");
-  } else {
-    // add Lora send queue length to display
-    snprintf(lmic_event_msg + 14, LMIC_EVENTMSG_LEN - 14, "%2u",
-             uxQueueMessagesWaiting(LoraSendQueue));
-  }
-}
-
-void lora_queuereset(void) { xQueueReset(LoraSendQueue); }
-
-// LMIC lorawan stack task
-void lmictask(void *pvParameters) {
-  _ASSERT((uint32_t)pvParameters == 1);
-
   // setup LMIC stack
   os_init_ex(&myPinmap); // initialize lmic run-time environment
 
@@ -355,7 +256,7 @@ void lmictask(void *pvParameters) {
 
   // Reset the MAC state. Session and pending data transfers will be
   // discarded.
-  lora_stack_reset();
+  LMIC_reset();
 
 // This tells LMIC to make the receive windows bigger, in case your clock is
 // faster or slower. This causes the transceiver to be earlier switched on,
@@ -365,11 +266,79 @@ void lmictask(void *pvParameters) {
   LMIC_setClockError(CLOCK_ERROR_PROCENTAGE * MAX_CLOCK_ERROR / 1000);
 #endif
 
+// Pass ABP parameters to LMIC_setSession
+#ifdef LORA_ABP
+  setABPParameters(); // These parameters are defined as macro in loraconf.h
+
+  // load saved session from RTC, if we have one
+  if (RTC_runmode == RUNMODE_WAKEUP) {
+    LoadLMICFromRTC();
+  } else {
+    uint8_t appskey[sizeof(APPSKEY)];
+    uint8_t nwkskey[sizeof(NWKSKEY)];
+    memcpy_P(appskey, APPSKEY, sizeof(APPSKEY));
+    memcpy_P(nwkskey, NWKSKEY, sizeof(NWKSKEY));
+    LMIC_setSession(NETID, DEVADDR, nwkskey, appskey);
+  }
+
+  // Pass OTA parameters to LMIC_setSession
+#else
+  // load saved session from RTC, if we have one
+  if (RTC_runmode == RUNMODE_WAKEUP)
+    LoadLMICFromRTC();
+  if (!LMIC_startJoining())
+    ESP_LOGI(TAG, "Already joined");
+#endif
+
+  // start lmic loop task
+  ESP_LOGI(TAG, "Starting LMIC...");
+  xTaskCreatePinnedToCore(lmictask,   // task function
+                          "lmictask", // name of task
+                          4096,       // stack size of task
+                          (void *)1,  // parameter of the task
+                          2,          // priority of the task
+                          &lmicTask,  // task handle
+                          1);         // CPU core
+
+  // start lora send task
+  xTaskCreatePinnedToCore(lora_send,      // task function
+                          "lorasendtask", // name of task
+                          3072,           // stack size of task
+                          (void *)1,      // parameter of the task
+                          1,              // priority of the task
+                          &lorasendTask,  // task handle
+                          1);             // CPU core
+
+  return ESP_OK;
+}
+
+void lora_enqueuedata(MessageBuffer_t *message) {
+  // enqueue message in LORA send queue
+  if (xQueueSendToBack(LoraSendQueue, (void *)message, (TickType_t)0) !=
+      pdTRUE) {
+    snprintf(lmic_event_msg + 14, LMIC_EVENTMSG_LEN - 14, "<>");
+    ESP_LOGW(TAG, "LORA sendqueue is full");
+  } else {
+    // add Lora send queue length to display
+    snprintf(lmic_event_msg + 14, LMIC_EVENTMSG_LEN - 14, "%2u",
+             uxQueueMessagesWaiting(LoraSendQueue));
+  }
+}
+
+void lora_queuereset(void) { xQueueReset(LoraSendQueue); }
+
+uint32_t lora_queuewaiting(void) {
+  return uxQueueMessagesWaiting(LoraSendQueue);
+}
+
+// LMIC loop task
+void lmictask(void *pvParameters) {
+  _ASSERT((uint32_t)pvParameters == 1);
   while (1) {
     os_runloop_once(); // execute lmic scheduled jobs and events
     delay(2);          // yield to CPU
   }
-} // lmictask
+}
 
 // lmic event handler
 void myEventCallback(void *pUserData, ev_t ev) {
@@ -410,7 +379,7 @@ void myEventCallback(void *pUserData, ev_t ev) {
   case EV_JOIN_FAILED:
     // must call LMIC_reset() to stop joining
     // otherwise join procedure continues.
-    lora_stack_reset();
+    LMIC_reset();
     break;
 
   case EV_JOIN_TXCOMPLETE:
@@ -560,4 +529,44 @@ void mac_decode(const uint8_t cmd[], const uint8_t cmdlen, bool is_down) {
 } // mac_decode()
 #endif // VERBOSE
 
+// following code snippet was taken from
+// https://github.com/JackGruber/ESP32-LMIC-DeepSleep-example/blob/master/src/main.cpp
+
+void SaveLMICToRTC(int deepsleep_sec) {
+  RTC_LMIC = LMIC;
+
+  // ESP32 can't track millis during DeepSleep and no option to advance
+  // millis after DeepSleep. Therefore reset DutyCyles
+
+  unsigned long now = millis();
+
+  // EU Like Bands
+#if defined(CFG_LMIC_EU_like)
+  for (int i = 0; i < MAX_BANDS; i++) {
+    ostime_t correctedAvail =
+        RTC_LMIC.bands[i].avail -
+        ((now / 1000.0 + deepsleep_sec) * OSTICKS_PER_SEC);
+    if (correctedAvail < 0) {
+      correctedAvail = 0;
+    }
+    RTC_LMIC.bands[i].avail = correctedAvail;
+  }
+
+  RTC_LMIC.globalDutyAvail = RTC_LMIC.globalDutyAvail -
+                             ((now / 1000.0 + deepsleep_sec) * OSTICKS_PER_SEC);
+  if (RTC_LMIC.globalDutyAvail < 0) {
+    RTC_LMIC.globalDutyAvail = 0;
+  }
+#else
+  ESP_LOGW(TAG, "No DutyCycle recalculation function!");
+#endif
+
+  ESP_LOGI(TAG, "LMIC state saved");
+}
+
+void LoadLMICFromRTC() {
+  LMIC = RTC_LMIC;
+  ESP_LOGI(TAG, "LMIC state loaded");
+}
+
 #endif // HAS_LORA

src/macsniff.cpp

@@ -3,20 +3,17 @@
 #include "globals.h"
 #include "macsniff.h"
 
-#if (VENDORFILTER)
-#include "vendor_array.h"
-#endif
-
 // Local logging tag
 static const char TAG[] = __FILE__;
 
-QueueHandle_t MacQueue;
+static QueueHandle_t MacQueue;
 TaskHandle_t macProcessTask;
 
-uint16_t salt = 0;
+static uint32_t salt = renew_salt();
 
-uint16_t get_salt(void) {
+uint32_t renew_salt(void) {
-  salt = (uint16_t)random(65536); // get new 16bit random for salting hashes
+  salt = esp_random();
+  ESP_LOGV(TAG, "new salt = %04X", salt);
   return salt;
 }
 
@@ -58,7 +55,7 @@ esp_err_t macQueueInit() {
 
   xTaskCreatePinnedToCore(mac_process,     // task function
                           "mac_process",   // name of task
-                          2048,            // stack size of task
+                          3072,            // stack size of task
                           (void *)1,       // parameter of the task
                           1,               // priority of the task
                           &macProcessTask, // task handle
@@ -105,8 +102,9 @@ void IRAM_ATTR mac_add(uint8_t *paddr, int8_t rssi, snifftype_t sniff_type) {
 
 uint16_t mac_analyze(MacBuffer_t MacBuffer) {
 
-  if (salt == 0) // ensure we have salt (appears after radio is turned on)
+  uint32_t *mac; // pointer to shortened 4 byte MAC
-    return 0;
+  uint32_t saltedmac;
+  uint16_t hashedmac;
 
   if ((cfg.rssilimit) &&
       (MacBuffer.rssi < cfg.rssilimit)) { // rssi is negative value
@@ -121,27 +119,13 @@ uint16_t mac_analyze(MacBuffer_t MacBuffer) {
     int8_t beaconID = isBeacon(macConvert(MacBuffer.mac));
     if (beaconID >= 0) {
       ESP_LOGI(TAG, "Beacon ID#%d detected", beaconID);
-#if (HAS_LED != NOT_A_PIN) || defined(HAS_RGB_LED)
       blink_LED(COLOR_WHITE, 2000);
-#endif
       payload.reset();
       payload.addAlarm(MacBuffer.rssi, beaconID);
-      SendPayload(BEACONPORT, prio_high);
+      SendPayload(BEACONPORT);
     }
   };
 
-#if (VENDORFILTER)
-  uint32_t *oui; // temporary buffer for vendor OUI
-  oui = (uint32_t *)MacBuffer.mac;
-  // if we find OUI on vendor filter list we don't analyze and return early
-  if (std::find(vendors.begin(), vendors.end(), __builtin_bswap32(*oui) >> 8) ==
-      vendors.end())
-    return 0;
-#endif
-
-  char buff[10]; // temporary buffer for printf
-  uint32_t *mac; // temporary buffer for shortened MAC
-
   // only last 3 MAC Address bytes are used for MAC address anonymization
   // but since it's uint32 we take 4 bytes to avoid 1st value to be 0.
   // this gets MAC in msb (= reverse) order, but doesn't matter for hashing it.
@@ -151,11 +135,15 @@ uint16_t mac_analyze(MacBuffer_t MacBuffer) {
   // and increment counter on display
   // https://en.wikipedia.org/wiki/MAC_Address_Anonymization
 
-  snprintf(buff, sizeof(buff), "%08X",
+  // reversed 4 byte MAC added to current salt
-           *mac + (uint32_t)salt); // convert unsigned 32-bit salted MAC
+  saltedmac = *mac + salt;
-                                   // to 8 digit hex string
+
-  uint16_t hashedmac = rokkit(&buff[3], 5); // hash MAC 8 digit -> 5 digit
+  // hashed 4 byte MAC
-  auto newmac = macs.insert(hashedmac);     // add hashed MAC, if new unique
+  // to save RAM, we use only lower 2 bytes of hash, since collisions don't
+  // matter in our use case
+  hashedmac = hash((const char *)&saltedmac, 4);
+
+  auto newmac = macs.insert(hashedmac); // add hashed MAC, if new unique
   bool added =
       newmac.second ? true : false; // true if hashed MAC is unique in container
 
@@ -166,37 +154,30 @@ uint16_t mac_analyze(MacBuffer_t MacBuffer) {
 
     case MAC_SNIFF_WIFI:
       macs_wifi++; // increment Wifi MACs counter
-#if (HAS_LED != NOT_A_PIN) || defined(HAS_RGB_LED)
       blink_LED(COLOR_GREEN, 50);
-#endif
       break;
 
-#if (BLECOUNTER)
     case MAC_SNIFF_BLE:
       macs_ble++; // increment BLE Macs counter
-#if (HAS_LED != NOT_A_PIN) || defined(HAS_RGB_LED)
       blink_LED(COLOR_MAGENTA, 50);
-#endif
       break;
-
 #if (COUNT_ENS)
     case MAC_SNIFF_BLE_ENS:
       macs_ble++;             // increment BLE Macs counter
       cwa_mac_add(hashedmac); // process ENS beacon
-#if (HAS_LED != NOT_A_PIN) || defined(HAS_RGB_LED)
       blink_LED(COLOR_WHITE, 50);
-#endif
       break;
-
+#endif
-#endif // COUNT_ENS
+    default:
-#endif // BLECOUNTER
+      break;
 
     } // switch
   }   // added
 
   // Log scan result
   ESP_LOGV(TAG,
-           "%s %s RSSI %ddBi -> salted MAC %s -> Hash %04X -> WiFi:%d  "
+           "%s %s RSSI %ddBi -> MAC %0x:%0x:%0x:%0x:%0x:%0x -> salted %04X"
+           " -> hashed %04X -> WiFi:%d  "
            "BLTH:%d "
 #if (COUNT_ENS)
            "(CWA:%d)"
@@ -204,7 +185,9 @@ uint16_t mac_analyze(MacBuffer_t MacBuffer) {
            "-> %d Bytes left",
            added ? "new  " : "known",
            MacBuffer.sniff_type == MAC_SNIFF_WIFI ? "WiFi" : "BLTH",
-           MacBuffer.rssi, buff, hashedmac, macs_wifi, macs_ble,
+           MacBuffer.rssi, MacBuffer.mac[0], MacBuffer.mac[1], MacBuffer.mac[2],
+           MacBuffer.mac[3], MacBuffer.mac[4], MacBuffer.mac[5], saltedmac,
+           hashedmac, macs_wifi, macs_ble,
 #if (COUNT_ENS)
            cwa_report(),
 #endif

src/main.cpp

@@ -29,16 +29,17 @@ Task          Core  Prio  Purpose
 -------------------------------------------------------------------------------
 ledloop       0     3     blinks LEDs
 spiloop       0     2     reads/writes data on spi interface
-mqttloop      0     2     reads/writes data on ETH interface
 IDLE          0     0     ESP32 arduino scheduler -> runs wifi sniffer
 
 lmictask      1     2     MCCI LMiC LORAWAN stack
 clockloop     1     4     generates realtime telegrams for external clock
+mqttloop      1     2     reads/writes data on ETH interface
 timesync_proc 1     3     processes realtime time sync requests
 irqhandler    1     2     cyclic tasks (i.e. displayrefresh) triggered by timers
 gpsloop       1     1     reads data from GPS via serial or i2c
 lorasendtask  1     1     feeds data from lora sendqueue to lmcic
-macprocess    1     1     analyzes sniffed MACs
+macprocess    1     1     MAC analyzer loop
+rmcd_process  1     1     Remote command interpreter loop
 IDLE          1     0     ESP32 arduino scheduler -> runs wifi channel rotator
 
 Low priority numbers denote low priority tasks.
@@ -60,15 +61,16 @@ irqHandlerTask (Core 1), see irqhandler.cpp
 
 fired by hardware
 DisplayIRQ      -> esp32 timer 0
-ButtonIRQ       -> external gpio
+CLOCKIRQ        -> esp32 timer 1 or external GPIO (RTC_INT or GPS_INT)
-PMUIRQ          -> PMU chip gpio
+MatrixDisplayIRQ-> esp32 timer 3
+ButtonIRQ       -> external GPIO
+PMUIRQ          -> PMU chip GPIO
 
 fired by software (Ticker.h)
 TIMESYNC_IRQ    -> setTimeSyncIRQ()
 CYCLIC_IRQ      -> setCyclicIRQ()
 SENDCYCLE_IRQ   -> setSendIRQ()
 BME_IRQ         -> setBMEIRQ()
-MQTT_IRQ        -> setMqttIRQ()
 
 ClockTask (Core 1), see timekeeper.cpp
 
@@ -88,8 +90,8 @@ triggers pps 1 sec impulse
 configData_t cfg; // struct holds current device configuration
 char lmic_event_msg[LMIC_EVENTMSG_LEN]; // display buffer for LMIC event message
 uint8_t batt_level = 0;                 // display value
-uint8_t volatile channel = 0;           // channel rotation counter
+uint8_t volatile channel = WIFI_CHANNEL_MIN;   // channel rotation counter
-uint8_t volatile rf_load = 0;           // RF traffic indicator
+uint8_t volatile rf_load = 0;                  // RF traffic indicator
 uint16_t volatile macs_wifi = 0, macs_ble = 0; // globals for display
 
 hw_timer_t *ppsIRQ = NULL, *displayIRQ = NULL, *matrixDisplayIRQ = NULL;
@@ -101,7 +103,7 @@ timesource_t timeSource = _unsynced;
 
 // container holding unique MAC address hashes with Memory Alloctor using PSRAM,
 // if present
-std::set<uint16_t, std::less<uint16_t>, Mallocator<uint16_t>> macs;
+DRAM_ATTR std::set<uint16_t, std::less<uint16_t>, Mallocator<uint16_t>> macs;
 
 // initialize payload encoder
 PayloadConvert payload(PAYLOAD_BUFFER_SIZE);
@@ -138,7 +140,7 @@ void setup() {
   esp_log_level_set("*", ESP_LOG_NONE);
 #endif
 
-  do_after_reset(rtc_get_reset_reason(0));
+  do_after_reset();
 
   // print chip information on startup if in verbose mode after coldstart
 #if (VERBOSE)
@@ -208,7 +210,8 @@ void setup() {
   _ASSERT(loadConfig()); // includes initialize if necessary
 
   // now that we are powered, we scan i2c bus for devices
-  i2c_scan();
+  if (RTC_runmode == RUNMODE_POWERCYCLE)
+    i2c_scan();
 
 // initialize display
 #ifdef HAS_DISPLAY
@@ -291,8 +294,12 @@ void setup() {
   ESP_LOGI(TAG, "Starting MAC processor...");
   macQueueInit();
 
+  // start rcommand processing task
+  ESP_LOGI(TAG, "Starting rcommand interpreter...");
+  rcmd_init();
+
 // start BLE scan callback if BLE function is enabled in NVRAM configuration
-// or switch off bluetooth, if not compiled
+// or remove bluetooth stack from RAM, if option bluetooth is not compiled
 #if (BLECOUNTER)
   strcat_P(features, " BLE");
   if (cfg.blescan) {
@@ -303,9 +310,9 @@ void setup() {
 #else
   // remove bluetooth stack to gain more free memory
   btStop();
-  ESP_ERROR_CHECK(esp_bt_mem_release(ESP_BT_MODE_BTDM));
+  esp_bt_mem_release(ESP_BT_MODE_BTDM);
-  ESP_ERROR_CHECK(esp_coex_preference_set(
+  esp_coex_preference_set(
-      ESP_COEX_PREFER_WIFI)); // configure Wifi/BT coexist lib
+      ESP_COEX_PREFER_WIFI); // configure Wifi/BT coexist lib
 #endif
 
 // initialize gps
@@ -348,9 +355,7 @@ void setup() {
 // initialize LoRa
 #if (HAS_LORA)
   strcat_P(features, " LORA");
-  // kick off join, except we come from sleep
+  _ASSERT(lmic_init() == ESP_OK);
-  _ASSERT(lora_stack_init(RTC_runmode == RUNMODE_WAKEUP ? false : true) ==
-          ESP_OK);
 #endif
 
 // initialize SPI
@@ -376,7 +381,7 @@ void setup() {
     strcat_P(features, " SDS");
 #endif
 
-#if (VENDORFILTER)
+#if (MACFILTER)
   strcat_P(features, " FILTER");
 #endif
 
@@ -414,23 +419,23 @@ void setup() {
 
 #if (WIFICOUNTER)
   strcat_P(features, " WIFI");
-  // start wifi in monitor mode and start channel rotation timer
+  // install wifi driver in RAM and start channel hopping
-
   wifi_sniffer_init();
-  if (cfg.blescan) {
+  // start wifi sniffing, if enabled
+  if (cfg.wifiscan) {
     ESP_LOGI(TAG, "Starting Wifi...");
     switch_wifi_sniffer(1);
   } else
     switch_wifi_sniffer(0);
 #else
-  // switch off wifi
+  // remove wifi driver from RAM, if option wifi not compiled
   esp_wifi_deinit();
 #endif
 
   // initialize salt value using esp_random() called by random() in
   // arduino-esp32 core. Note: do this *after* wifi has started, since
   // function gets it's seed from RF noise
-  get_salt(); // get new 16bit for salting hashes
+  reset_counters();
 
   // start state machine
   ESP_LOGI(TAG, "Starting Interrupt Handler...");
@@ -453,8 +458,10 @@ void setup() {
 #endif
   if (bme_init())
     ESP_LOGI(TAG, "BME sensor initialized");
-  else
+  else {
     ESP_LOGE(TAG, "BME sensor could not be initialized");
+    cfg.payloadmask &= ~MEMS_DATA; // switch off transmit of BME data
+  }
 #endif
 
   // starting timers and interrupts

src/mqttclient.cpp

@@ -4,23 +4,26 @@
 
 static const char TAG[] = __FILE__;
 
-QueueHandle_t MQTTSendQueue;
+static QueueHandle_t MQTTSendQueue;
 TaskHandle_t mqttTask;
 
 Ticker mqttTimer;
 WiFiClient netClient;
 MQTTClient mqttClient;
 
+void mqtt_deinit(void) {
+  mqttClient.unsubscribe(MQTT_INTOPIC);
+  mqttClient.onMessageAdvanced(NULL);
+  mqttClient.disconnect();
+  vTaskDelete(mqttTask);
+}
+
 esp_err_t mqtt_init(void) {
 
-  // setup network connection
+  // setup network connection and MQTT client
-  WiFi.onEvent(NetworkEvent);
   ETH.begin();
-  // WiFi.mode(WIFI_STA);
-  // WiFi.begin("SSID", "PASSWORD");
-
-  // setup mqtt client
   mqttClient.begin(MQTT_SERVER, MQTT_PORT, netClient);
+  mqttClient.setKeepAlive(MQTT_KEEPALIVE);
   mqttClient.onMessageAdvanced(mqtt_callback);
 
   _ASSERT(SEND_QUEUE_SIZE > 0);
@@ -33,17 +36,20 @@ esp_err_t mqtt_init(void) {
            SEND_QUEUE_SIZE * PAYLOAD_BUFFER_SIZE);
 
   ESP_LOGI(TAG, "Starting MQTTloop...");
-  mqttTimer.attach(MQTT_KEEPALIVE, setMqttIRQ);
+  xTaskCreatePinnedToCore(mqtt_client_task, "mqttloop", 4096, (void *)NULL, 1,
-  xTaskCreate(mqtt_client_task, "mqttloop", 4096, (void *)NULL, 1, &mqttTask);
+                          &mqttTask, 1);
-
   return ESP_OK;
 }
 
 int mqtt_connect(const char *my_host, const uint16_t my_port) {
   IPAddress mqtt_server_ip;
+  uint8_t mac[6];
+  char clientId[20];
 
-  // static String clientId = "paxcounter-" + ETH.macAddress();
+  // hash 6 byte MAC to 4 byte hash
-  static String clientId = "paxcounter-" + String(random(0xffff), HEX);
+  esp_eth_get_mac(mac);
+  const uint32_t hashedmac = hash((const char *)mac, 6);
+  snprintf(clientId, 20, "paxcounter_%08x", hashedmac);
 
   ESP_LOGI(TAG, "MQTT name is %s", MQTT_CLIENTNAME);
 
@@ -73,118 +79,80 @@ int mqtt_connect(const char *my_host, const uint16_t my_port) {
   return 0;
 }
 
-void NetworkEvent(WiFiEvent_t event) {
-  switch (event) {
-  case SYSTEM_EVENT_ETH_START:
-  case SYSTEM_EVENT_STA_START:
-    ESP_LOGI(TAG, "Network link layer started");
-    // ETH.setHostname(ETH.macAddress().c_str());
-    break;
-  case SYSTEM_EVENT_ETH_STOP:
-  case SYSTEM_EVENT_STA_STOP:
-    ESP_LOGI(TAG, "Network link layer stopped");
-    break;
-  case SYSTEM_EVENT_ETH_CONNECTED:
-  case SYSTEM_EVENT_STA_CONNECTED:
-    ESP_LOGI(TAG, "Network link connected");
-    break;
-  case SYSTEM_EVENT_ETH_DISCONNECTED:
-  case SYSTEM_EVENT_STA_DISCONNECTED:
-    ESP_LOGI(TAG, "Network link disconnected");
-    break;
-  case SYSTEM_EVENT_ETH_GOT_IP:
-    ESP_LOGI(TAG, "IP: %s", ETH.localIP().toString().c_str());
-    ESP_LOGI(TAG, "Link Speed: %d Mbps %s", ETH.linkSpeed(),
-             ETH.fullDuplex() ? "full duplex" : "half duplex");
-    mqtt_connect(MQTT_SERVER, MQTT_PORT);
-    break;
-  case SYSTEM_EVENT_STA_GOT_IP:
-    ESP_LOGI(TAG, "IP: %s", WiFi.localIP().toString().c_str());
-    mqtt_connect(MQTT_SERVER, MQTT_PORT);
-    break;
-
-  default:
-    break;
-  }
-}
-
 void mqtt_client_task(void *param) {
 
   MessageBuffer_t msg;
 
   while (1) {
 
-    // fetch next or wait for payload to send from queue
-    if (xQueueReceive(MQTTSendQueue, &msg, portMAX_DELAY) != pdTRUE) {
-      ESP_LOGE(TAG, "Premature return from xQueueReceive() with no data!");
-      continue;
-    }
-
-    // send data to mqtt server, if we are connected
     if (mqttClient.connected()) {
 
-      char buffer[PAYLOAD_BUFFER_SIZE + 3];
+      // check for incoming messages
-      snprintf(buffer, msg.MessageSize + 3, "%u/%s", msg.MessagePort,
+      mqttClient.loop();
-               msg.Message);
 
-      if (mqttClient.publish(MQTT_OUTTOPIC, buffer)) {
+      // fetch next or wait for payload to send from queue
-        ESP_LOGI(TAG, "%d byte(s) sent to MQTT server", msg.MessageSize + 2);
+      // do not delete item from queue until it is transmitted
+      // consider mqtt timeout while waiting
+      if (xQueuePeek(MQTTSendQueue, &msg,
+                     MQTT_KEEPALIVE * 1000 / portTICK_PERIOD_MS) != pdTRUE)
         continue;
-      } else {
-        mqtt_enqueuedata(&msg); // postpone the undelivered message
-        ESP_LOGD(TAG,
-                 "Couldn't sent message to MQTT server, message postponed");
-      }
 
+      // prepare mqtt topic
+      char topic[16];
+      snprintf(topic, 16, "%s/%u", MQTT_OUTTOPIC, msg.MessagePort);
+      size_t out_len = 0;
+
+      // get length of base64 encoded message
+      mbedtls_base64_encode(NULL, 0, &out_len, (unsigned char *)msg.Message,
+                            msg.MessageSize);
+
+      // base64 encode the message
+      unsigned char encoded[out_len];
+      mbedtls_base64_encode(encoded, out_len, &out_len,
+                            (unsigned char *)msg.Message, msg.MessageSize);
+
+      // send encoded message to mqtt server and delete it from queue
+      if (mqttClient.publish(topic, (const char *)encoded, out_len)) {
+        ESP_LOGD(TAG, "%u bytes sent to MQTT server", out_len);
+        xQueueReceive(MQTTSendQueue, &msg, (TickType_t)0);
+      } else
+        ESP_LOGD(TAG, "Couldn't sent message to MQTT server");
     } else {
       // attempt to reconnect to MQTT server
       ESP_LOGD(TAG, "MQTT client reconnecting...");
-      ESP_LOGD(TAG, "MQTT last_error = %d / rc = %d", mqttClient.lastError(),
-               mqttClient.returnCode());
-      mqtt_enqueuedata(&msg); // postpone the undelivered message
       delay(MQTT_RETRYSEC * 1000);
       mqtt_connect(MQTT_SERVER, MQTT_PORT);
     }
-
+  } // while (1)
-  } // while(1)
 }
 
-void mqtt_enqueuedata(MessageBuffer_t *message) {
+// process incoming MQTT messages
-  // enqueue message in MQTT send queue
+void mqtt_callback(MQTTClient *client, char *topic, char *payload, int length) {
-  BaseType_t ret;
+  if (strcmp(topic, MQTT_INTOPIC) == 0) {
-  MessageBuffer_t DummyBuffer;
-  sendprio_t prio = message->MessagePrio;
 
-  switch (prio) {
+    // get length of base64 encoded message
-  case prio_high:
+    size_t out_len = 0;
-    // clear space in queue if full, then fallthrough to normal
+    mbedtls_base64_decode(NULL, 0, &out_len, (unsigned char *)payload, length);
-    if (!uxQueueSpacesAvailable(MQTTSendQueue))
+
-      xQueueReceive(MQTTSendQueue, &DummyBuffer, (TickType_t)0);
+    // decode the base64 message
-  case prio_normal:
+    unsigned char decoded[out_len];
-    ret = xQueueSendToFront(MQTTSendQueue, (void *)message, (TickType_t)0);
+    mbedtls_base64_decode(decoded, out_len, &out_len, (unsigned char *)payload,
-    break;
+                          length);
-  case prio_low:
+
-  default:
+    rcommand(decoded, out_len);
-    ret = xQueueSendToBack(MQTTSendQueue, (void *)message, (TickType_t)0);
-    break;
   }
-  if (ret != pdTRUE)
+}
+
+// enqueue outgoing messages in MQTT send queue
+void mqtt_enqueuedata(MessageBuffer_t *message) {
+  if (xQueueSendToBack(MQTTSendQueue, (void *)message, (TickType_t)0) != pdTRUE)
     ESP_LOGW(TAG, "MQTT sendqueue is full");
 }
 
-void mqtt_callback(MQTTClient *client, char topic[], char payload[],
-                   int length) {
-  if (strcmp(topic, MQTT_INTOPIC) == 0)
-    rcommand((const uint8_t *)payload, (const uint8_t)length);
-}
-
-void mqtt_loop(void) {
-  if (!mqttClient.loop())
-    ESP_LOGD(TAG, "MQTT last_error = %d / rc = %d", mqttClient.lastError(),
-             mqttClient.returnCode());
-}
-
 void mqtt_queuereset(void) { xQueueReset(MQTTSendQueue); }
-void setMqttIRQ(void) { xTaskNotify(irqHandlerTask, MQTT_IRQ, eSetBits); }
+
+uint32_t mqtt_queuewaiting(void) {
+  return uxQueueMessagesWaiting(MQTTSendQueue);
+}
 
 #endif // HAS_MQTT

src/ota.cpp

@@ -178,9 +178,9 @@ int do_ota_update() {
     client.print("Cache-Control: no-cache\r\n");
     client.print("Connection: close\r\n\r\n");
 
-    unsigned long timeout = _millis();
+    unsigned long timeout = millis();
     while (client.available() == 0) {
-      if ((_millis() - timeout) > (RESPONSE_TIMEOUT_MS)) {
+      if ((long)(millis() - timeout) > (RESPONSE_TIMEOUT_MS)) {
         ESP_LOGI(TAG, "Client timeout");
         ota_display(3, " E", "client timeout");
         goto abort;

src/paxcounter_orig.conf

@@ -11,12 +11,13 @@
 
 // Payload send cycle and encoding
 #define SENDCYCLE                       30      // payload send cycle [seconds/2], 0 .. 255
+#define SLEEPCYCLE                      0       // sleep time after a send cycle [seconds/2], 0 .. 255; 0 means no sleep [default = 0]
 #define PAYLOAD_ENCODER                 2       // payload encoder: 1=Plain, 2=Packed, 3=Cayenne LPP dynamic, 4=Cayenne LPP packed
 #define COUNTERMODE                     0       // 0=cyclic, 1=cumulative, 2=cyclic confirmed
 
 // MAC sniffing parameters
-#define VENDORFILTER                    0       // set to 0 if you want to scan all devices, not filtering smartphone OUIs
+#define MACFILTER                       1       // set to 0 if you want to scan all devices, 1 to scan only devices with random MACs (aka smartphones) [default = 1]
-#define BLECOUNTER                      0       // set to 0 if you do not want to install the BLE sniffer
+#define BLECOUNTER                      1       // set to 0 if you do not want to install the BLE sniffer
 #define WIFICOUNTER                     1       // set to 0 if you do not want to install the WIFI sniffer
 #define MAC_QUEUE_SIZE                  50      // size of MAC processing buffer (number of MACs) [default = 50]
 
@@ -26,11 +27,11 @@
 #define BLESCANINTERVAL                 80      // [illiseconds] scan interval, see below, 3 .. 10240, default 80ms = 100% duty cycle
 
 // Corona Exposure Notification Service(ENS) counter
-#define COUNT_ENS                       0       // count found number of devices which advertise Exposure Notification Service
+#define COUNT_ENS                       1       // count found number of devices which advertise Exposure Notification Service
-                                                // set to 0 if you do not want to enable this function
+                                                // set to 1 if you want to enable this function [default=0]
 
 // for additional sensors (added by some user)
-#define HAS_SENSOR_1                    0       // set to 1 to enable data transfer of user sensor #1 (also used as ENS counter) [default=0]
+#define HAS_SENSOR_1                    1       // set to 1 to enable data transfer of user sensor #1 (also used as ENS counter) [default=0]
 #define HAS_SENSOR_2                    0       // set to 1 to enable data transfer of user sensor #2 [default=0]
 #define HAS_SENSOR_3                    0       // set to 1 to enable data transfer of user sensor #3 [default=0]
 
@@ -83,10 +84,10 @@
 #define RESPONSE_TIMEOUT_MS             60000   // firmware binary server connection timeout [milliseconds]
 
 // settings for syncing time of node with a time source (network / gps / rtc / timeserver)
-#define TIME_SYNC_LORAWAN               1       // set to 1 to use LORA network as time source, 0 means off [default = 1]
+#define TIME_SYNC_LORAWAN               0       // set to 1 to use LORA network as time source, 0 means off [default = 1]
 #define TIME_SYNC_LORASERVER            0       // set to 1 to use LORA timeserver as time source, 0 means off [default = 0]
 #define TIME_SYNC_INTERVAL              60      // sync time attempt each .. minutes from time source [default = 60], 0 means off
-#define TIME_SYNC_INTERVAL_RETRY        10       // retry time sync after lost sync each .. minutes [default = 10], 0 means off
+#define TIME_SYNC_INTERVAL_RETRY        10      // retry time sync after lost sync each .. minutes [default = 10], 0 means off
 #define TIME_SYNC_SAMPLES               1       // number of time requests for averaging, max. 255
 #define TIME_SYNC_CYCLE                 60      // delay between two time samples [seconds]
 #define TIME_SYNC_TIMEOUT               400     // timeout waiting for timeserver answer [seconds]
@@ -120,3 +121,15 @@
 #define CAYENNE_DEVICECONFIG            11	    // device period configuration
 #define CAYENNE_SENSORREAD              13	    // sensor period configuration
 #define CAYENNE_SENSORENABLE            14	    // sensor enable configuration
+
+// MQTT settings, only needed if MQTT is used (#define HAS_MQTT in board hal file)
+#define MQTT_ETHERNET 0 // select PHY: set 0 for Wifi, 1 for ethernet
+#define MQTT_INTOPIC "paxin"
+#define MQTT_OUTTOPIC "paxout"
+#define MQTT_PORT 1883
+#define MQTT_SERVER "public.cloud.shiftr.io"
+#define MQTT_USER "public"
+#define MQTT_PASSWD "public"
+#define MQTT_RETRYSEC 20  // retry reconnect every 20 seconds
+#define MQTT_KEEPALIVE 10 // keep alive interval in seconds
+//#define MQTT_CLIENTNAME "my_paxcounter" // generated by default

src/payload.cpp

@@ -49,7 +49,7 @@ void PayloadConvert::addConfig(configData_t value) {
   buffer[cursor++] = value.blescantime;
   buffer[cursor++] = value.blescan;
   buffer[cursor++] = value.wifiant;
-  buffer[cursor++] = value.vendorfilter;
+  buffer[cursor++] = value.macfilter;
   buffer[cursor++] = value.rgblum;
   buffer[cursor++] = value.payloadmask;
   buffer[cursor++] = value.monitormode;
@@ -179,8 +179,7 @@ void PayloadConvert::addConfig(configData_t value) {
   writeBitmap(value.adrmode ? true : false, value.screensaver ? true : false,
               value.screenon ? true : false, value.countermode ? true : false,
               value.blescan ? true : false, value.wifiant ? true : false,
-              value.vendorfilter ? true : false,
+              value.macfilter ? true : false, value.monitormode ? true : false);
-              value.monitormode ? true : false);
   writeUint8(value.payloadmask);
   writeVersion(value.version);
 }

src/power.cpp

@@ -47,17 +47,14 @@ void AXP192_powerevent_IRQ(void) {
   if (pmu.isBattTempHighIRQ())
     ESP_LOGI(TAG, "Battery low temperature.");
 
-// short press -> esp32 deep sleep mode, can be exited by pressing user button
+  // short press -> esp32 deep sleep mode, can be exited by pressing user button
-#ifdef HAS_BUTTON
+  if (pmu.isPEKShortPressIRQ()) {
-  if (pmu.isPEKShortPressIRQ() && (RTC_runmode == RUNMODE_NORMAL)) {
     enter_deepsleep(0, HAS_BUTTON);
   }
-#endif
 
   // long press -> shutdown power, can be exited by another longpress
   if (pmu.isPEKLongtPressIRQ()) {
     AXP192_power(pmu_power_off); // switch off Lora, GPS, display
-    pmu.shutdown();              // switch off device
   }
 
   pmu.clearIRQ();
@@ -71,25 +68,33 @@ void AXP192_power(pmu_power_t powerlevel) {
   switch (powerlevel) {
 
   case pmu_power_off:
-    pmu.setChgLEDMode(AXP20X_LED_OFF);
+    pmu.shutdown();
-    pmu.setPowerOutPut(AXP192_DCDC1, AXP202_OFF);
-    pmu.setPowerOutPut(AXP192_LDO3, AXP202_OFF);
-    pmu.setPowerOutPut(AXP192_LDO2, AXP202_OFF);
-    // pmu.setPowerOutPut(AXP192_DCDC3, AXP202_OFF);
     break;
 
   case pmu_power_sleep:
-    pmu.setChgLEDMode(AXP20X_LED_BLINK_1HZ);
+#ifdef PMU_LED_SLEEP_MODE
-    // we don't cut off DCDC1, because then display blocks i2c bus
+    pmu.setChgLEDMode(PMU_LED_SLEEP_MODE);
+#else
+    pmu.setChgLEDMode(AXP20X_LED_OFF);
+#endif
+    // we don't cut off DCDC1, because OLED display will then block i2c bus
+    // pmu.setPowerOutPut(AXP192_DCDC1, AXP202_OFF); // OLED off
     pmu.setPowerOutPut(AXP192_LDO3, AXP202_OFF); // gps off
     pmu.setPowerOutPut(AXP192_LDO2, AXP202_OFF); // lora off
     break;
 
-  default:                                       // all rails power on
+  case pmu_power_on:
-    pmu.setPowerOutPut(AXP192_LDO2, AXP202_ON);  // Lora on T-Beam V1.0
+  default:
-    pmu.setPowerOutPut(AXP192_LDO3, AXP202_ON);  // Gps on T-Beam V1.0
+    pmu.setPowerOutPut(AXP192_LDO2, AXP202_ON);   // Lora on T-Beam V1.0/1.1
-    pmu.setPowerOutPut(AXP192_DCDC1, AXP202_ON); // OLED on T-Beam v1.0
+    pmu.setPowerOutPut(AXP192_LDO3, AXP202_ON);   // Gps on T-Beam V1.0/1.1
+    pmu.setPowerOutPut(AXP192_DCDC1, AXP202_ON);  // OLED on T-Beam v1.0/1.1
+    pmu.setPowerOutPut(AXP192_DCDC2, AXP202_OFF); // unused on T-Beam v1.0/1.1
+    pmu.setPowerOutPut(AXP192_EXTEN, AXP202_OFF); // unused on T-Beam v1.0/1.1
+#ifdef PMU_LED_RUN_MODE
+    pmu.setChgLEDMode(PMU_LED_RUN_MODE);
+#else
     pmu.setChgLEDMode(AXP20X_LED_LOW_LEVEL);
+#endif
     break;
   }
 }
@@ -119,10 +124,22 @@ void AXP192_init(void) {
     ESP_LOGI(TAG, "AXP192 PMU initialization failed");
   else {
 
-    // configure AXP192
+    // configure voltages
-    pmu.setDCDC1Voltage(3300);              // for external OLED display
+    pmu.setDCDC1Voltage(3300); // for external OLED display
-    pmu.setTimeOutShutdown(false);          // no automatic shutdown
+    pmu.setLDO2Voltage(3300);  // LORA VDD 3v3
-    pmu.setTSmode(AXP_TS_PIN_MODE_DISABLE); // TS pin mode off to save power
+    pmu.setLDO3Voltage(3300);  // GPS VDD 3v3
+
+    // configure PEK button settings
+    pmu.setTimeOutShutdown(false); // forced shutdown by PEK enabled
+    pmu.setShutdownTime(
+        AXP_POWER_OFF_TIME_65); // 6 sec button press for shutdown
+    pmu.setlongPressTime(
+        AXP_LONGPRESS_TIME_1S5); // 1.5 sec button press for long press
+    pmu.setStartupTime(
+        AXP192_STARTUP_TIME_1S); // 1 sec button press for startup
+
+    // set battery temperature sensing pin off to save power
+    pmu.setTSmode(AXP_TS_PIN_MODE_DISABLE);
 
     // switch ADCs on
     pmu.adc1Enable(AXP202_BATT_VOL_ADC1, true);
@@ -130,15 +147,12 @@ void AXP192_init(void) {
     pmu.adc1Enable(AXP202_VBUS_VOL_ADC1, true);
     pmu.adc1Enable(AXP202_VBUS_CUR_ADC1, true);
 
-    // switch power rails on
-    AXP192_power(pmu_power_on);
-
 #ifdef PMU_INT
     pinMode(PMU_INT, INPUT_PULLUP);
     attachInterrupt(digitalPinToInterrupt(PMU_INT), PMUIRQ, FALLING);
     pmu.enableIRQ(AXP202_VBUS_REMOVED_IRQ | AXP202_VBUS_CONNECT_IRQ |
                       AXP202_BATT_REMOVED_IRQ | AXP202_BATT_CONNECT_IRQ |
-                      AXP202_CHARGING_FINISHED_IRQ,
+                      AXP202_CHARGING_FINISHED_IRQ | AXP202_PEK_SHORTPRESS_IRQ,
                   1);
     pmu.clearIRQ();
 #endif // PMU_INT
@@ -150,6 +164,9 @@ void AXP192_init(void) {
     pmu.enableChargeing(true);
 #endif
 
+    // switch power rails on
+    AXP192_power(pmu_power_on);
+
     ESP_LOGI(TAG, "AXP192 PMU initialized");
   }
 }
@@ -160,11 +177,11 @@ void calibrate_voltage(void) {
 #ifdef BAT_MEASURE_ADC
 // configure ADC
 #ifndef BAT_MEASURE_ADC_UNIT // ADC1
-  ESP_ERROR_CHECK(adc1_config_width(ADC_WIDTH_BIT_12));
+  adc1_config_width(ADC_WIDTH_BIT_12);
-  ESP_ERROR_CHECK(adc1_config_channel_atten(adc_channel, atten));
+  adc1_config_channel_atten(adc_channel, atten);
 #else // ADC2
-      // ESP_ERROR_CHECK(adc2_config_width(ADC_WIDTH_BIT_12));
+      // adc2_config_width(ADC_WIDTH_BIT_12);
-  ESP_ERROR_CHECK(adc2_config_channel_atten(adc_channel, atten));
+  adc2_config_channel_atten(adc_channel, atten);
 #endif
   // calibrate ADC
   esp_adc_cal_value_t val_type = esp_adc_cal_characterize(
@@ -199,7 +216,7 @@ uint16_t read_voltage(void) {
 #else                        // ADC2
   int adc_buf = 0;
   for (int i = 0; i < NO_OF_SAMPLES; i++) {
-    ESP_ERROR_CHECK(adc2_get_raw(adc_channel, ADC_WIDTH_BIT_12, &adc_buf));
+    adc2_get_raw(adc_channel, ADC_WIDTH_BIT_12, &adc_buf);
     adc_reading += adc_buf;
   }
 #endif                       // BAT_MEASURE_ADC_UNIT
@@ -234,10 +251,11 @@ uint8_t read_battlevel(mapFn_t mapFunction) {
 
 bool batt_sufficient() {
 #if (defined HAS_PMU || defined BAT_MEASURE_ADC || defined HAS_IP5306)
-  return (batt_level > OTA_MIN_BATT);
+  if (batt_level) // we have a battery voltage
-#else
+    return (batt_level > OTA_MIN_BATT);
-  return true; // we don't know batt level
+  else
 #endif
+    return true; // we don't know batt level
 }
 
 #ifdef HAS_IP5306

src/rcommand.cpp

@@ -5,6 +5,9 @@
 // Local logging tag
 static const char TAG[] = __FILE__;
 
+static QueueHandle_t RcmdQueue;
+TaskHandle_t rcmdTask;
+
 // set of functions that can be triggered by remote commands
 void set_reset(uint8_t val[]) {
   switch (val[0]) {
@@ -15,7 +18,6 @@ void set_reset(uint8_t val[]) {
   case 1: // reset MAC counter
     ESP_LOGI(TAG, "Remote command: reset MAC counter");
     reset_counters(); // clear macs
-    get_salt();       // get new salt
     break;
   case 2: // reset device to factory settings
     ESP_LOGI(TAG, "Remote command: reset device to factory settings");
@@ -32,7 +34,11 @@ void set_reset(uint8_t val[]) {
   case 9: // reset and ask for software update via Wifi OTA
     ESP_LOGI(TAG, "Remote command: software update via Wifi");
 #if (USE_OTA)
-    RTC_runmode = RUNMODE_UPDATE;
+    // check power status before scheduling ota update
+    if (batt_sufficient())
+      RTC_runmode = RUNMODE_UPDATE;
+    else
+      ESP_LOGE(TAG, "Battery level %d%% is too low for OTA", batt_level);
 #endif // USE_OTA
     break;
 
@@ -54,14 +60,30 @@ void set_sendcycle(uint8_t val[]) {
            cfg.sendcycle * 2);
 }
 
+void set_sleepcycle(uint8_t val[]) {
+  cfg.sleepcycle = val[0];
+  ESP_LOGI(TAG, "Remote command: set sleep cycle to %d seconds",
+           cfg.sleepcycle * 2);
+}
+
 void set_wifichancycle(uint8_t val[]) {
   cfg.wifichancycle = val[0];
   // update Wifi channel rotation timer period
-  xTimerChangePeriod(WifiChanTimer, pdMS_TO_TICKS(cfg.wifichancycle * 10), 100);
+  if (cfg.wifichancycle > 0) {
-
+    if (xTimerIsTimerActive(WifiChanTimer) == pdFALSE)
-  ESP_LOGI(TAG,
+      xTimerStart(WifiChanTimer, (TickType_t)0);
-           "Remote command: set Wifi channel switch interval to %.1f seconds",
+    xTimerChangePeriod(WifiChanTimer, pdMS_TO_TICKS(cfg.wifichancycle * 10),
-           cfg.wifichancycle / float(100));
+                       100);
+    ESP_LOGI(
+        TAG,
+        "Remote command: set Wifi channel hopping interval to %.1f seconds",
+        cfg.wifichancycle / float(100));
+  } else {
+    xTimerStop(WifiChanTimer, (TickType_t)0);
+    esp_wifi_set_channel(WIFI_CHANNEL_MIN, WIFI_SECOND_CHAN_NONE);
+    channel = WIFI_CHANNEL_MIN;
+    ESP_LOGI(TAG, "Remote command: set Wifi channel hopping to off");
+  }
 }
 
 void set_blescantime(uint8_t val[]) {
@@ -96,7 +118,6 @@ void set_countmode(uint8_t val[]) {
     return;
   }
   reset_counters(); // clear macs
-  get_salt();       // get new salt
 }
 
 void set_screensaver(uint8_t val[]) {
@@ -215,18 +236,18 @@ void set_loraadr(uint8_t val[]) {
 
 void set_blescan(uint8_t val[]) {
   ESP_LOGI(TAG, "Remote command: set BLE scanner to %s", val[0] ? "on" : "off");
+  macs_ble = 0; // clear BLE counter
   cfg.blescan = val[0] ? 1 : 0;
   if (cfg.blescan)
     start_BLEscan();
-  else {
+  else
-    macs_ble = 0; // clear BLE counter
     stop_BLEscan();
-  }
 }
 
 void set_wifiscan(uint8_t val[]) {
   ESP_LOGI(TAG, "Remote command: set WIFI scanner to %s",
            val[0] ? "on" : "off");
+  macs_wifi = 0; // clear WIFI counter
   cfg.wifiscan = val[0] ? 1 : 0;
   switch_wifi_sniffer(cfg.wifiscan);
 }
@@ -240,15 +261,15 @@ void set_wifiant(uint8_t val[]) {
 #endif
 }
 
-void set_vendorfilter(uint8_t val[]) {
+void set_macfilter(uint8_t val[]) {
-  ESP_LOGI(TAG, "Remote command: set vendorfilter mode to %s",
+  ESP_LOGI(TAG, "Remote command: set macfilter mode to %s",
            val[0] ? "on" : "off");
-  cfg.vendorfilter = val[0] ? 1 : 0;
+  cfg.macfilter = val[0] ? 1 : 0;
 }
 
 void set_rgblum(uint8_t val[]) {
   // Avoid wrong parameters
-  cfg.rgblum = (val[0] >= 0 && val[0] <= 100) ? (uint8_t)val[0] : RGBLUMINOSITY;
+  cfg.rgblum = (val[0] <= 100) ? (uint8_t)val[0] : RGBLUMINOSITY;
   ESP_LOGI(TAG, "Remote command: set RGB Led luminosity %d", cfg.rgblum);
 };
 
@@ -273,16 +294,16 @@ void get_config(uint8_t val[]) {
   ESP_LOGI(TAG, "Remote command: get device configuration");
   payload.reset();
   payload.addConfig(cfg);
-  SendPayload(CONFIGPORT, prio_high);
+  SendPayload(CONFIGPORT);
 };
 
 void get_status(uint8_t val[]) {
   ESP_LOGI(TAG, "Remote command: get device status");
   payload.reset();
-  payload.addStatus(read_voltage(), uptime() / 1000, temperatureRead(),
+  payload.addStatus(read_voltage(), (uint64_t)(uptime() / 1000ULL),
-                    getFreeRAM(), rtc_get_reset_reason(0),
+                    temperatureRead(), getFreeRAM(), rtc_get_reset_reason(0),
                     rtc_get_reset_reason(1));
-  SendPayload(STATUSPORT, prio_high);
+  SendPayload(STATUSPORT);
 };
 
 void get_gps(uint8_t val[]) {
@@ -292,7 +313,7 @@ void get_gps(uint8_t val[]) {
   gps_storelocation(&gps_status);
   payload.reset();
   payload.addGPS(gps_status);
-  SendPayload(GPSPORT, prio_high);
+  SendPayload(GPSPORT);
 #else
   ESP_LOGW(TAG, "GPS function not supported");
 #endif
@@ -303,7 +324,7 @@ void get_bme(uint8_t val[]) {
 #if (HAS_BME)
   payload.reset();
   payload.addBME(bme_status);
-  SendPayload(BMEPORT, prio_high);
+  SendPayload(BMEPORT);
 #else
   ESP_LOGW(TAG, "BME sensor not supported");
 #endif
@@ -314,7 +335,7 @@ void get_batt(uint8_t val[]) {
 #if (defined BAT_MEASURE_ADC || defined HAS_PMU)
   payload.reset();
   payload.addVoltage(read_voltage());
-  SendPayload(BATTPORT, prio_normal);
+  SendPayload(BATTPORT);
 #else
   ESP_LOGW(TAG, "Battery voltage not supported");
 #endif
@@ -325,7 +346,7 @@ void get_time(uint8_t val[]) {
   payload.reset();
   payload.addTime(now());
   payload.addByte(timeStatus() << 4 | timeSource);
-  SendPayload(TIMEPORT, prio_high);
+  SendPayload(TIMEPORT);
 };
 
 void set_time(uint8_t val[]) {
@@ -348,39 +369,49 @@ void set_enscount(uint8_t val[]) {
     cfg.payloadmask &= ~SENSOR1_DATA;
 }
 
+void set_loadconfig(uint8_t val[]) {
+  ESP_LOGI(TAG, "Remote command: load config from NVRAM");
+  loadConfig();
+};
+
+void set_saveconfig(uint8_t val[]) {
+  ESP_LOGI(TAG, "Remote command: save config to NVRAM");
+  saveConfig(false);
+};
+
 // assign previously defined functions to set of numeric remote commands
-// format: opcode, function, #bytes params,
+// format: {opcode, function, number of function arguments}
-// flag (true = do make settings persistent / false = don't)
+
-//
 static const cmd_t table[] = {
-    {0x01, set_rssi, 1, true},          {0x02, set_countmode, 1, true},
+    {0x01, set_rssi, 1},          {0x02, set_countmode, 1},
-    {0x03, set_gps, 1, true},           {0x04, set_display, 1, true},
+    {0x03, set_gps, 1},           {0x04, set_display, 1},
-    {0x05, set_loradr, 1, true},        {0x06, set_lorapower, 1, true},
+    {0x05, set_loradr, 1},        {0x06, set_lorapower, 1},
-    {0x07, set_loraadr, 1, true},       {0x08, set_screensaver, 1, true},
+    {0x07, set_loraadr, 1},       {0x08, set_screensaver, 1},
-    {0x09, set_reset, 1, false},        {0x0a, set_sendcycle, 1, true},
+    {0x09, set_reset, 1},         {0x0a, set_sendcycle, 1},
-    {0x0b, set_wifichancycle, 1, true}, {0x0c, set_blescantime, 1, true},
+    {0x0b, set_wifichancycle, 1}, {0x0c, set_blescantime, 1},
-    {0x0d, set_vendorfilter, 1, false}, {0x0e, set_blescan, 1, true},
+    {0x0d, set_macfilter, 1},     {0x0e, set_blescan, 1},
-    {0x0f, set_wifiant, 1, true},       {0x10, set_rgblum, 1, true},
+    {0x0f, set_wifiant, 1},       {0x10, set_rgblum, 1},
-    {0x11, set_monitor, 1, true},       {0x12, set_beacon, 7, false},
+    {0x11, set_monitor, 1},       {0x12, set_beacon, 7},
-    {0x13, set_sensor, 2, true},        {0x14, set_payloadmask, 1, true},
+    {0x13, set_sensor, 2},        {0x14, set_payloadmask, 1},
-    {0x15, set_bme, 1, true},           {0x16, set_batt, 1, true},
+    {0x15, set_bme, 1},           {0x16, set_batt, 1},
-    {0x17, set_wifiscan, 1, true},      {0x18, set_enscount, 1, true},
+    {0x17, set_wifiscan, 1},      {0x18, set_enscount, 1},
-    {0x80, get_config, 0, false},       {0x81, get_status, 0, false},
+    {0x19, set_sleepcycle, 1},    {0x20, set_loadconfig, 0},
-    {0x83, get_batt, 0, false},         {0x84, get_gps, 0, false},
+    {0x21, set_saveconfig, 0},    {0x80, get_config, 0},
-    {0x85, get_bme, 0, false},          {0x86, get_time, 0, false},
+    {0x81, get_status, 0},        {0x83, get_batt, 0},
-    {0x87, set_time, 0, false},         {0x99, set_flush, 0, false}};
+    {0x84, get_gps, 0},           {0x85, get_bme, 0},
+    {0x86, get_time, 0},          {0x87, set_time, 0},
+    {0x99, set_flush, 0}};
 
 static const uint8_t cmdtablesize =
     sizeof(table) / sizeof(table[0]); // number of commands in command table
 
 // check and execute remote command
-void rcommand(const uint8_t cmd[], const uint8_t cmdlength) {
+void rcmd_execute(const uint8_t cmd[], const uint8_t cmdlength) {
 
   if (cmdlength == 0)
     return;
 
   uint8_t foundcmd[cmdlength], cursor = 0;
-  bool storeflag = false;
 
   while (cursor < cmdlength) {
 
@@ -392,24 +423,82 @@ void rcommand(const uint8_t cmd[], const uint8_t cmdlength) {
           memmove(foundcmd, cmd + cursor,
                   table[i].params); // strip opcode from cmd array
           cursor += table[i].params;
-          if (table[i].store) // ceck if function needs to store configuration
-            storeflag = true;
           table[i].func(
               foundcmd); // execute assigned function with given parameters
         } else
-          ESP_LOGI(
+          ESP_LOGI(TAG,
-              TAG,
+                   "Remote command x%02X called with missing parameter(s), "
-              "Remote command x%02X called with missing parameter(s), skipped",
+                   "skipped",
-              table[i].opcode);
+                   table[i].opcode);
-        break;   // command found -> exit table lookup loop
+        break; // command found -> exit table lookup loop
-      }          // end of command validation
+      }        // end of command validation
-    }            // end of command table lookup loop
+    }          // end of command table lookup loop
+
     if (i < 0) { // command not found -> exit parser
       ESP_LOGI(TAG, "Unknown remote command x%02X, ignored", cmd[cursor]);
       break;
     }
   } // command parsing loop
 
-  if (storeflag)
+} //  rcmd_execute()
-    saveConfig();
+
+// remote command processing task
+void rcmd_process(void *pvParameters) {
+  _ASSERT((uint32_t)pvParameters == 1); // FreeRTOS check
+
+  RcmdBuffer_t RcmdBuffer;
+
+  while (1) {
+    // fetch next or wait for incoming rcommand from queue
+    if (xQueueReceive(RcmdQueue, &RcmdBuffer, portMAX_DELAY) != pdTRUE) {
+      ESP_LOGE(TAG, "Premature return from xQueueReceive() with no data!");
+      continue;
+    }
+    rcmd_execute(RcmdBuffer.cmd, RcmdBuffer.cmdLen);
+  }
+
+  delay(2); // yield to CPU
+} // rcmd_process()
+
+// enqueue remote command
+void IRAM_ATTR rcommand(const uint8_t *cmd, const size_t cmdlength) {
+
+  RcmdBuffer_t rcmd = {0};
+
+  rcmd.cmdLen = cmdlength;
+  memcpy(rcmd.cmd, cmd, cmdlength);
+
+  if (xQueueSendToBack(RcmdQueue, (void *)&rcmd, (TickType_t)0) != pdTRUE)
+    ESP_LOGW(TAG, "Remote command queue is full");
 } // rcommand()
+
+void rcmd_queuereset(void) { xQueueReset(RcmdQueue); }
+
+uint32_t rcmd_queuewaiting(void) { return uxQueueMessagesWaiting(RcmdQueue); }
+
+void rcmd_deinit(void) {
+  rcmd_queuereset();
+  vTaskDelete(rcmdTask);
+}
+
+esp_err_t rcmd_init(void) {
+
+  _ASSERT(RCMD_QUEUE_SIZE > 0);
+  RcmdQueue = xQueueCreate(RCMD_QUEUE_SIZE, sizeof(RcmdBuffer_t));
+  if (RcmdQueue == 0) {
+    ESP_LOGE(TAG, "Could not create rcommand send queue. Aborting.");
+    return ESP_FAIL;
+  }
+  ESP_LOGI(TAG, "Rcommand send queue created, size %d Bytes",
+           RCMD_QUEUE_SIZE * sizeof(RcmdBuffer_t));
+
+  xTaskCreatePinnedToCore(rcmd_process, // task function
+                          "rcmdloop",   // name of task
+                          3072,         // stack size of task
+                          (void *)1,    // parameter of the task
+                          1,            // priority of the task
+                          &rcmdTask,    // task handle
+                          1);           // CPU core
+
+  return ESP_OK;
+} // rcmd_init()

src/reset.cpp

@@ -5,28 +5,38 @@
 // Local logging tag
 static const char TAG[] = __FILE__;
 
-// variable keep its values after restart or wakeup from sleep
+// Conversion factor for micro seconds to seconds
-RTC_NOINIT_ATTR runmode_t RTC_runmode;
+#define uS_TO_S_FACTOR 1000000ULL
+
+// variables keep its values after a wakeup from sleep
+RTC_NOINIT_ATTR runmode_t RTC_runmode = RUNMODE_POWERCYCLE;
+RTC_DATA_ATTR struct timeval RTC_sleep_start_time;
+RTC_DATA_ATTR unsigned long long RTC_millis = 0;
+timeval sleep_stop_time;
+
+const char *runmode[5] = {"powercycle", "normal", "wakeup", "update", "sleep"};
 
 void do_reset(bool warmstart) {
   if (warmstart) {
-    // store LMIC keys and counters in RTC memory
+    ESP_LOGI(TAG, "restarting device (warmstart)");
-    ESP_LOGI(TAG, "restarting device (warmstart), keeping runmode %d",
-             RTC_runmode);
   } else {
 #if (HAS_LORA)
-    if (RTC_runmode == RUNMODE_NORMAL)
+    if (RTC_runmode == RUNMODE_NORMAL) {
       LMIC_shutdown();
+    }
 #endif
     RTC_runmode = RUNMODE_POWERCYCLE;
-    ESP_LOGI(TAG, "restarting device (coldstart), set runmode %d", RTC_runmode);
+    ESP_LOGI(TAG, "restarting device (coldstart)");
   }
   esp_restart();
 }
 
-void do_after_reset(int reason) {
+void do_after_reset(void) {
 
-  switch (reason) {
+  struct timeval sleep_stop_time;
+  uint64_t sleep_time_ms;
+
+  switch (rtc_get_reset_reason(0)) {
 
   case POWERON_RESET:          // 0x01 Vbat power on reset
   case RTCWDT_BROWN_OUT_RESET: // 0x0f Reset when the vdd voltage is not
@@ -39,10 +49,16 @@ void do_after_reset(int reason) {
     break;
 
   case DEEPSLEEP_RESET: // 0x05 Deep Sleep reset digital core
-    RTC_runmode = RUNMODE_WAKEUP;
+    // calculate time spent in deep sleep
-#if (HAS_LORA)
+    gettimeofday(&sleep_stop_time, NULL);
-    // to be done: restore LoRaWAN channel configuration and datarate here
+    sleep_time_ms =
-#endif
+        (sleep_stop_time.tv_sec - RTC_sleep_start_time.tv_sec) * 1000 +
+        (sleep_stop_time.tv_usec - RTC_sleep_start_time.tv_usec) / 1000;
+    ESP_LOGI(TAG, "Time spent in deep sleep: %d ms", sleep_time_ms);
+    RTC_millis += sleep_time_ms; // increment system monotonic time
+    // set wakeup state, not if we have pending OTA update
+    if (RTC_runmode == RUNMODE_SLEEP)
+      RTC_runmode = RUNMODE_WAKEUP;
     break;
 
   case SW_RESET:         // 0x03 Software reset digital core
@@ -61,58 +77,111 @@ void do_after_reset(int reason) {
     break;
   }
 
-  ESP_LOGI(TAG, "Starting Software v%s, runmode %d", PROGVERSION, RTC_runmode);
+  ESP_LOGI(TAG, "Starting Software v%s, runmode %s", PROGVERSION,
+           runmode[RTC_runmode]);
 }
 
-void enter_deepsleep(const int wakeup_sec, const gpio_num_t wakeup_gpio) {
+void enter_deepsleep(const uint64_t wakeup_sec, gpio_num_t wakeup_gpio) {
 
-  if ((!wakeup_sec) && (!wakeup_gpio) && (RTC_runmode == RUNMODE_NORMAL))
+  ESP_LOGI(TAG, "Preparing to sleep...");
-    return;
 
-// assure LMIC is in safe state
+  RTC_runmode = RUNMODE_SLEEP;
-#if (HAS_LORA)
+  int i;
-  if (os_queryTimeCriticalJobs(ms2osticks(10000)))
-    return;
 
-    // to be done: save LoRaWAN channel configuration here
+  // validate wake up pin, if we have
+  if (!GPIO_IS_VALID_GPIO(wakeup_gpio))
+    wakeup_gpio = GPIO_NUM_MAX;
 
+  // stop further enqueuing of senddata and MAC processing
+  sendTimer.detach();
+
+  // switch off radio and other power consuming hardware
+#if (WIFICOUNTER)
+  switch_wifi_sniffer(0);
+#endif
+#if (BLECOUNTER)
+  stop_BLEscan();
+  btStop();
+#endif
+#if (HAS_SDS011)
+  sds011_sleep(void);
 #endif
 
-  // set up power domains
+  // stop MAC processing
-  esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_SLOW_MEM, ESP_PD_OPTION_ON);
+  vTaskDelete(macProcessTask);
-
-  // set wakeup timer
-  if (wakeup_sec)
-    esp_sleep_enable_timer_wakeup(wakeup_sec * 1000000);
-
-  // set wakeup gpio
-  if (wakeup_gpio != NOT_A_PIN) {
-    rtc_gpio_isolate(wakeup_gpio);
-    esp_sleep_enable_ext1_wakeup(1ULL << wakeup_gpio, ESP_EXT1_WAKEUP_ALL_LOW);
-  }
 
   // halt interrupts accessing i2c bus
   mask_user_IRQ();
 
-// switch off display
+  // wait a while (max 100 sec) to clear send queues
+  ESP_LOGI(TAG, "Waiting until send queues are empty...");
+  for (i = 100; i > 0; i--) {
+    if (allQueuesEmtpy())
+      break;
+    vTaskDelay(pdMS_TO_TICKS(1000));
+  }
+
+  // shutdown LMIC safely, waiting max 100 sec
+#if (HAS_LORA)
+  ESP_LOGI(TAG, "Waiting until LMIC is idle...");
+  for (i = 100; i > 0; i--) {
+    if ((LMIC.opmode & OP_TXRXPEND) ||
+        os_queryTimeCriticalJobs(sec2osticks(wakeup_sec)))
+      vTaskDelay(pdMS_TO_TICKS(1000));
+    else
+      break;
+  }
+#endif // (HAS_LORA)
+
+// shutdown MQTT safely
+#ifdef HAS_MQTT
+  mqtt_deinit();
+#endif
+
+// shutdown SPI safely
+#ifdef HAS_SPI
+  spi_deinit();
+#endif
+
+// save LMIC state to RTC RAM
+#if (HAS_LORA)
+  SaveLMICToRTC(wakeup_sec);
+#endif // (HAS_LORA)
+
+// set display to power save mode
 #ifdef HAS_DISPLAY
   dp_shutdown();
 #endif
 
-// switch off wifi & ble
+// reduce power if has PMU or VEXT
-#if (BLECOUNTER)
-  stop_BLEscan();
-#endif
-
-// reduce power if has PMU
 #ifdef HAS_PMU
   AXP192_power(pmu_power_sleep);
+#elif EXT_POWER_SW
+  digitalWrite(EXT_POWER_SW, EXT_POWER_OFF);
 #endif
 
   // shutdown i2c bus
   i2c_deinit();
 
-  // enter sleep mode
+  // configure wakeup sources
-  ESP_LOGI(TAG, "Going to sleep...");
+  // https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/sleep_modes.html
+
+  // set up RTC wakeup timer, if we have
+  if (wakeup_sec > 0) {
+    esp_sleep_enable_timer_wakeup(wakeup_sec * uS_TO_S_FACTOR);
+  }
+
+  // set wakeup gpio, if we have
+  if (wakeup_gpio != GPIO_NUM_MAX) {
+    rtc_gpio_isolate(wakeup_gpio); // minimize deep sleep current
+    esp_sleep_enable_ext1_wakeup(1ULL << wakeup_gpio, ESP_EXT1_WAKEUP_ALL_LOW);
+  }
+
+  // time stamp sleep start time and save system monotonic time. Deep sleep.
+  gettimeofday(&RTC_sleep_start_time, NULL);
+  RTC_millis += millis();
+  ESP_LOGI(TAG, "Going to sleep, good bye.");
   esp_deep_sleep_start();
 }
+
+unsigned long long uptime() { return (RTC_millis + millis()); }

src/senddata.cpp

@@ -4,17 +4,17 @@
 Ticker sendTimer;
 
 void setSendIRQ() {
-  xTaskNotifyFromISR(irqHandlerTask, SENDCYCLE_IRQ, eSetBits, NULL);
+  xTaskNotify(irqHandlerTask, SENDCYCLE_IRQ, eSetBits);
 }
 
 // put data to send in RTos Queues used for transmit over channels Lora and SPI
-void SendPayload(uint8_t port, sendprio_t prio) {
+void SendPayload(uint8_t port) {
 
-  MessageBuffer_t
+  ESP_LOGD(TAG, "sending Payload for Port %d", port);
-      SendBuffer; // contains MessageSize, MessagePort, MessagePrio, Message[]
+
+  MessageBuffer_t SendBuffer; // contains MessageSize, MessagePort, Message[]
 
   SendBuffer.MessageSize = payload.getSize();
-  SendBuffer.MessagePrio = prio;
 
   switch (PAYLOAD_ENCODER) {
   case 1: // plain -> no mapping
@@ -110,11 +110,10 @@ void sendData() {
       sds011_store(&sds_status);
       payload.addSDS(sds_status);
 #endif
-      SendPayload(COUNTERPORT, prio_normal);
+      SendPayload(COUNTERPORT);
       // clear counter if not in cumulative counter mode
       if (cfg.countermode != 1) {
         reset_counters(); // clear macs container and reset all counters
-        get_salt();       // get new salt for salting hashes
         ESP_LOGI(TAG, "Counter cleared");
       }
 #ifdef HAS_DISPLAY
@@ -128,7 +127,7 @@ void sendData() {
     case MEMS_DATA:
       payload.reset();
       payload.addBME(bme_status);
-      SendPayload(BMEPORT, prio_normal);
+      SendPayload(BMEPORT);
       break;
 #endif
 
@@ -140,7 +139,7 @@ void sendData() {
           gps_storelocation(&gps_status);
           payload.reset();
           payload.addGPS(gps_status);
-          SendPayload(GPSPORT, prio_high);
+          SendPayload(GPSPORT);
         } else
           ESP_LOGD(TAG, "No valid GPS position");
       }
@@ -152,7 +151,7 @@ void sendData() {
     case SENSOR1_DATA:
       payload.reset();
       payload.addSensor(sensor_read(1));
-      SendPayload(SENSOR1PORT, prio_normal);
+      SendPayload(SENSOR1PORT);
 #if (COUNT_ENS)
       if (cfg.countermode != 1)
         cwa_clear();
@@ -163,14 +162,14 @@ void sendData() {
     case SENSOR2_DATA:
       payload.reset();
       payload.addSensor(sensor_read(2));
-      SendPayload(SENSOR2PORT, prio_normal);
+      SendPayload(SENSOR2PORT);
       break;
 #endif
 #if (HAS_SENSOR_3)
     case SENSOR3_DATA:
       payload.reset();
       payload.addSensor(sensor_read(3));
-      SendPayload(SENSOR3PORT, prio_normal);
+      SendPayload(SENSOR3PORT);
       break;
 #endif
 #endif
@@ -179,7 +178,7 @@ void sendData() {
     case BATT_DATA:
       payload.reset();
       payload.addVoltage(read_voltage());
-      SendPayload(BATTPORT, prio_normal);
+      SendPayload(BATTPORT);
       break;
 #endif
 
@@ -187,10 +186,10 @@ void sendData() {
     bitmask &= ~mask;
     mask <<= 1;
   } // while (bitmask)
-
 } // sendData()
 
-void flushQueues() {
+void flushQueues(void) {
+  rcmd_queuereset();
 #if (HAS_LORA)
   lora_queuereset();
 #endif
@@ -201,3 +200,17 @@ void flushQueues() {
   mqtt_queuereset();
 #endif
 }
+
+bool allQueuesEmtpy(void) {
+  uint32_t rc = rcmd_queuewaiting();
+#if (HAS_LORA)
+  rc += lora_queuewaiting();
+#endif
+#ifdef HAS_SPI
+  rc += spi_queuewaiting();
+#endif
+#ifdef HAS_MQTT
+  rc += mqtt_queuewaiting();
+#endif
+  return (rc == 0) ? true : false;
+}

src/spislave.cpp

@@ -43,7 +43,7 @@ static const char TAG[] = __FILE__;
 DMA_ATTR uint8_t txbuf[BUFFER_SIZE];
 DMA_ATTR uint8_t rxbuf[BUFFER_SIZE];
 
-QueueHandle_t SPISendQueue;
+static QueueHandle_t SPISendQueue;
 
 TaskHandle_t spiTask;
 
@@ -57,7 +57,8 @@ void spi_slave_task(void *param) {
     memset(rxbuf, 0, sizeof(rxbuf));
 
     // fetch next or wait for payload to send from queue
-    if (xQueueReceive(SPISendQueue, &msg, portMAX_DELAY) != pdTRUE) {
+    // do not delete item from queue until it is transmitted
+    if (xQueuePeek(SPISendQueue, &msg, portMAX_DELAY) != pdTRUE) {
       ESP_LOGE(TAG, "Premature return from xQueueReceive() with no data!");
       continue;
     }
@@ -90,12 +91,14 @@ void spi_slave_task(void *param) {
     // wait until spi master clocks out the data, and read results in rx buffer
     ESP_LOGI(TAG, "Prepared SPI transaction for %zu byte(s)", transaction_size);
     ESP_LOG_BUFFER_HEXDUMP(TAG, txbuf, transaction_size, ESP_LOG_DEBUG);
-    ESP_ERROR_CHECK_WITHOUT_ABORT(
+    spi_slave_transmit(HSPI_HOST, &spi_transaction, portMAX_DELAY);
-        spi_slave_transmit(HSPI_HOST, &spi_transaction, portMAX_DELAY));
     ESP_LOG_BUFFER_HEXDUMP(TAG, rxbuf, transaction_size, ESP_LOG_DEBUG);
     ESP_LOGI(TAG, "Transaction finished with size %zu bits",
              spi_transaction.trans_len);
 
+    // delete sent item from queue
+    xQueueReceive(SPISendQueue, &msg, (TickType_t)0);
+
     // check if command was received, then call interpreter with command payload
     if ((spi_transaction.trans_len) && ((rxbuf[2]) == RCMDPORT)) {
       rcommand(rxbuf + HEADER_SIZE, spi_transaction.trans_len - HEADER_SIZE);
@@ -103,7 +106,9 @@ void spi_slave_task(void *param) {
   }
 }
 
-esp_err_t spi_init() {
+void spi_deinit(void) { vTaskDelete(spiTask); }
+
+esp_err_t spi_init(void) {
   _ASSERT(SEND_QUEUE_SIZE > 0);
   SPISendQueue = xQueueCreate(SEND_QUEUE_SIZE, sizeof(MessageBuffer_t));
   if (SPISendQueue == 0) {
@@ -149,27 +154,12 @@ esp_err_t spi_init() {
 
 void spi_enqueuedata(MessageBuffer_t *message) {
   // enqueue message in SPI send queue
-  BaseType_t ret;
+  if (xQueueSendToBack(SPISendQueue, (void *)message, (TickType_t)0) != pdTRUE)
-  MessageBuffer_t DummyBuffer;
-  sendprio_t prio = message->MessagePrio;
-
-  switch (prio) {
-  case prio_high:
-    // clear space in queue if full, then fallthrough to normal
-    if (!uxQueueSpacesAvailable(SPISendQueue))
-      xQueueReceive(SPISendQueue, &DummyBuffer, (TickType_t)0);
-  case prio_normal:
-    ret = xQueueSendToFront(SPISendQueue, (void *)message, (TickType_t)0);
-    break;
-  case prio_low:
-  default:
-    ret = xQueueSendToBack(SPISendQueue, (void *)message, (TickType_t)0);
-    break;
-  }
-  if (ret != pdTRUE)
     ESP_LOGW(TAG, "SPI sendqueue is full");
 }
 
 void spi_queuereset(void) { xQueueReset(SPISendQueue); }
 
+uint32_t spi_queuewaiting(void) { return uxQueueMessagesWaiting(SPISendQueue); }
+
 #endif // HAS_SPI

src/timekeeper.cpp

@@ -26,7 +26,7 @@ Ticker timesyncer;
 void setTimeSyncIRQ() { xTaskNotify(irqHandlerTask, TIMESYNC_IRQ, eSetBits); }
 
 void calibrateTime(void) {
-  ESP_LOGD(TAG, "[%0.3f] calibrateTime, timeSource == %d", _millis() / 1000.0,
+  ESP_LOGD(TAG, "[%0.3f] calibrateTime, timeSource == %d", millis() / 1000.0,
            timeSource);
   time_t t = 0;
   uint16_t t_msec = 0;

src/timesync.cpp

@@ -82,13 +82,13 @@ void IRAM_ATTR timesync_processReq(void *taskparameter) {
     }
 
     // collect timestamp samples in timestamp array
-    for (uint8_t i = 0; i < TIME_SYNC_SAMPLES; i++) {
+    for (int8_t i = 0; i < TIME_SYNC_SAMPLES; i++) {
 
 // send timesync request
 #if (TIME_SYNC_LORASERVER) // ask user's timeserver (for LoRAWAN < 1.0.3)
       payload.reset();
       payload.addByte(time_sync_seqNo);
-      SendPayload(TIMEPORT, prio_high);
+      SendPayload(TIMEPORT);
 #elif (TIME_SYNC_LORAWAN) // ask network (requires LoRAWAN >= 1.0.3)
       LMIC_requestNetworkTime(timesync_serverAnswer, &time_sync_seqNo);
       // trigger to immediately get DevTimeAns from class A device
@@ -148,7 +148,7 @@ void IRAM_ATTR timesync_processReq(void *taskparameter) {
     // send timesync end char to show timesync was successful
     payload.reset();
     payload.addByte(TIME_SYNC_END_FLAG);
-    SendPayload(TIMEPORT, prio_high);
+    SendPayload(TIMEPORT);
     goto Finish;
 
   Fail:

src/wifiscan.cpp

@@ -7,10 +7,6 @@ static const char TAG[] = "wifi";
 
 TimerHandle_t WifiChanTimer;
 
-static wifi_country_t wifi_country = {WIFI_MY_COUNTRY, WIFI_CHANNEL_MIN,
-                                      WIFI_CHANNEL_MAX, 100,
-                                      WIFI_COUNTRY_POLICY_MANUAL};
-
 typedef struct {
   unsigned frame_ctrl : 16;
   unsigned duration_id : 16;
@@ -35,61 +31,70 @@ IRAM_ATTR void wifi_sniffer_packet_handler(void *buff,
       (wifi_ieee80211_packet_t *)ppkt->payload;
   const wifi_ieee80211_mac_hdr_t *hdr = &ipkt->hdr;
 
-  // process seen MAC
+// process seen MAC
-  mac_add((uint8_t *)hdr->addr2, ppkt->rx_ctrl.rssi, MAC_SNIFF_WIFI);
+#if MACFILTER
+  // we guess it's a smartphone, if U/L bit #2 of MAC is set
+  // bit #2 = 1 -> local mac (randomized) / bit #2 = 0 -> universal mac
+  if ((hdr->addr2[0] & 0b10) == 0)
+    return;
+  else
+#endif
+    mac_add((uint8_t *)hdr->addr2, ppkt->rx_ctrl.rssi, MAC_SNIFF_WIFI);
 }
 
 // Software-timer driven Wifi channel rotation callback function
 void switchWifiChannel(TimerHandle_t xTimer) {
-  // static uint8_t channel = 0; // channel rotation counter
-  _ASSERT(xTimer != NULL);
   channel =
       (channel % WIFI_CHANNEL_MAX) + 1; // rotate channel 1..WIFI_CHANNEL_MAX
   esp_wifi_set_channel(channel, WIFI_SECOND_CHAN_NONE);
 }
 
 void wifi_sniffer_init(void) {
-  wifi_init_config_t wificfg = WIFI_INIT_CONFIG_DEFAULT();
-  wificfg.nvs_enable = 0;        // we don't need any wifi settings from NVRAM
-  wificfg.wifi_task_core_id = 0; // we want wifi task running on core 0
 
-  // wifi_promiscuous_filter_t filter = {
+  wifi_country_t wifi_country = {WIFI_MY_COUNTRY, WIFI_CHANNEL_MIN,
-  //    .filter_mask = WIFI_PROMIS_FILTER_MASK_MGMT}; // only MGMT frames
+                                 WIFI_CHANNEL_MAX, 100,
-  // .filter_mask = WIFI_PROMIS_FILTER_MASK_ALL}; // we use all frames
+                                 WIFI_COUNTRY_POLICY_MANUAL};
 
-  wifi_promiscuous_filter_t filter = {.filter_mask =
+  wifi_init_config_t wifi_cfg = WIFI_INIT_CONFIG_DEFAULT();
-                                          WIFI_PROMIS_FILTER_MASK_MGMT |
+  wifi_cfg.event_handler = NULL;  // we don't need a wifi event handler
-                                          WIFI_PROMIS_FILTER_MASK_DATA};
+  wifi_cfg.nvs_enable = 0;        // we don't need any wifi settings from NVRAM
+  wifi_cfg.wifi_task_core_id = 0; // we want wifi task running on core 0
 
-  ESP_ERROR_CHECK(esp_wifi_init(&wificfg)); // configure Wifi with cfg
+  wifi_promiscuous_filter_t wifi_filter = {.filter_mask =
-  ESP_ERROR_CHECK(
+                                               WIFI_PROMIS_FILTER_MASK_MGMT |
-      esp_wifi_set_country(&wifi_country)); // set locales for RF and channels
+                                               WIFI_PROMIS_FILTER_MASK_DATA};
-  ESP_ERROR_CHECK(
-      esp_wifi_set_storage(WIFI_STORAGE_RAM)); // we don't need NVRAM
-  ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_NULL));
-  ESP_ERROR_CHECK(esp_wifi_set_ps(WIFI_PS_NONE)); // no modem power saving
-  ESP_ERROR_CHECK(esp_wifi_set_promiscuous_filter(&filter)); // set frame filter
-  ESP_ERROR_CHECK(esp_wifi_set_promiscuous_rx_cb(&wifi_sniffer_packet_handler));
-  ESP_ERROR_CHECK(esp_wifi_set_promiscuous(true)); // now switch on monitor mode
 
-  // setup wifi channel rotation timer
+  esp_wifi_init(&wifi_cfg);            // start Wifi task
+  esp_wifi_set_country(&wifi_country); // set locales for RF and channels
+  esp_wifi_set_storage(WIFI_STORAGE_RAM);
+  esp_wifi_set_mode(WIFI_MODE_NULL);
+  esp_wifi_set_ps(WIFI_PS_NONE);                 // no modem power saving
+  esp_wifi_set_promiscuous_filter(&wifi_filter); // set frame filter
+  esp_wifi_set_promiscuous_rx_cb(&wifi_sniffer_packet_handler);
+
+  // setup wifi channel hopping timer
   WifiChanTimer =
-      xTimerCreate("WifiChannelTimer", pdMS_TO_TICKS(cfg.wifichancycle * 10),
+      xTimerCreate("WifiChannelTimer",
+                   (cfg.wifichancycle > 0) ? pdMS_TO_TICKS(cfg.wifichancycle)
+                                           : pdMS_TO_TICKS(50),
                    pdTRUE, (void *)0, switchWifiChannel);
 }
 
 void switch_wifi_sniffer(uint8_t state) {
-  _ASSERT(WifiChanTimer != NULL);
   if (state) {
-    // switch wifi sniffer on
+    // start sniffer
-    ESP_ERROR_CHECK(esp_wifi_start());
+    esp_wifi_start();
-    xTimerStart(WifiChanTimer, 0);
     esp_wifi_set_promiscuous(true);
+    esp_wifi_set_channel(WIFI_CHANNEL_MIN, WIFI_SECOND_CHAN_NONE);
+    // start channel hopping timer
+    if (cfg.wifichancycle > 0)
+      xTimerStart(WifiChanTimer, (TickType_t)0);
   } else {
-    // switch wifi sniffer off
+    // start channel hopping timer
-    xTimerStop(WifiChanTimer, 0);
+    if (xTimerIsTimerActive(WifiChanTimer) != pdFALSE)
+      xTimerStop(WifiChanTimer, (TickType_t)0);
+    // stop sniffer
     esp_wifi_set_promiscuous(false);
-    ESP_ERROR_CHECK(esp_wifi_stop());
+    esp_wifi_stop();
-    macs_wifi = 0; // clear WIFI counter
   }
 }