42 lines
2.6 KiB
C
42 lines
2.6 KiB
C
|
// Hardware related definitions for #IoT Octopus32 with the Adafruit LoRaWAN Wing
|
||
|
|
// You can use this configuration also with the Adafruit ESP32 Feather + the LoRaWAN Wing
|
||
|
|
// In this config we use the Adafruit OLED Wing which is only 128x32 pixel, need to find a smaller font
|
||
|
|
|
||
|
|
// disable brownout detection (avoid unexpected reset on some boards)
|
||
|
|
#define DISABLE_BROWNOUT 1 // comment out if you want to keep brownout feature
|
||
|
|
|
||
|
|
#define HAS_LED 13 // ESP32 GPIO12 (pin22) On Board LED
|
||
|
|
#define LED_ACTIVE_LOW 1 // Onboard LED is active when pin is LOW
|
||
|
|
//#define HAS_RGB_LED 13 // ESP32 GPIO13 (pin13) On Board Shield WS2812B RGB LED
|
||
|
|
//#define HAS_BUTTON 15 // ESP32 GPIO15 (pin15) Button is on the LoraNode32 shield
|
||
|
|
//#define BUTTON_PULLUP 1 // Button need pullup instead of default pulldown
|
||
|
|
|
||
|
|
#define HAS_LORA 1 // comment out if device shall not send data via LoRa
|
||
|
|
#define HAS_SPI 1 // comment out if device shall not send data via SPI
|
||
|
|
#define CFG_sx1276_radio 1 // RFM95 module
|
||
|
|
|
||
|
|
// re-define pin definitions of pins_arduino.h
|
||
|
|
#define PIN_SPI_SS 14 //14 // ESP32 GPIO5 (Pin5) -- SX1276 NSS (Pin19) SPI Chip Select Input
|
||
|
|
#define PIN_SPI_MOSI 18 // ESP32 GPIO23 (Pin23) -- SX1276 MOSI (Pin18) SPI Data Input
|
||
|
|
#define PIN_SPI_MISO 19 // ESP32 GPIO19 (Pin19) -- SX1276 MISO (Pin17) SPI Data Output
|
||
|
|
#define PIN_SPI_SCK 5 // ESP32 GPIO18 (Pin18) -- SX1276 SCK (Pin16) SPI Clock Input
|
||
|
|
|
||
|
|
//GPIO_NUM_
|
||
|
|
// non arduino pin definitions
|
||
|
|
#define RST LMIC_UNUSED_PIN // ESP32 GPIO25 (Pin25) -- SX1276 NRESET (Pin7) Reset Trigger Input
|
||
|
|
#define DIO0 33 // ESP32 GPIO27 (Pin27) -- SX1276 DIO0 (Pin8) used by LMIC for detecting LoRa RX_Done & TX_Done
|
||
|
|
#define DIO1 33 // ESP32 GPIO26 (Pin26) -- SX1276 DIO1 (Pin9) used by LMIC for detecting LoRa RX_Timeout
|
||
|
|
#define DIO2 LMIC_UNUSED_PIN // 4 ESP32 GPIO4 (Pin4) -- SX1276 DIO2 (Pin10) not used by LMIC for LoRa (Timeout for FSK only)
|
||
|
|
#define DIO5 LMIC_UNUSED_PIN // 35 ESP32 GPIO35 (Pin35) -- SX1276 DIO5 not used by LMIC for LoRa (Timeout for FSK only)
|
||
|
|
|
||
|
|
// Hardware pin definitions for LoRaNode32 Board with OLED I2C Display
|
||
|
|
#define OLED_RST U8X8_PIN_NONE // Not reset pin
|
||
|
|
#define HAS_DISPLAY U8X8_SSD1306_128X64_NONAME_HW_I2C // U8X8_SSD1306_128X32_UNIVISION_SW_I2C //
|
||
|
|
//#define DISPLAY_FLIP 1 // uncomment this for rotated display
|
||
|
|
#define I2C_SDA 23 //21 // ESP32 GPIO14 (Pin14) -- OLED SDA
|
||
|
|
#define I2C_SCL 22 //22 // ESP32 GPIO12 (Pin12) -- OLED SCL
|
||
|
|
|
||
|
|
// I2C config for Microchip 24AA02E64 DEVEUI unique address
|
||
|
|
//#define MCP_24AA02E64_I2C_ADDRESS 0x50 // I2C address for the 24AA02E64
|
||
|
|
//#define MCP_24AA02E64_MAC_ADDRESS 0xF8 // Memory adress of unique deveui 64 bits
|