ESP32-PaxCounter/platformio_orig.ini

; ---> SELECT ONE TARGET BOARD FROM FOLLOWING ROWS <---
;
; Note: For "LILYGO TTGO ESP32-Paxcounter LoRa32 V2.1 1.6.1" select board ttgov21new.h
; Note: For "LILYGO TTGO ESP32-Paxcounter LoRa32 V2.0 1.6.0" select board ttgov2.h and add bodge wire from LORA_IO1 to GPIO33
;
;
[board]
;halfile = generic.h
;halfile = ebox.h
;halfile = eboxtube.h
;halfile = ecopower.h
;halfile = heltec.h
;halfile = heltecv2.h
;halfile = heltecv21.h
;halfile = ttgov1.h
;halfile = ttgov2.h
;halfile = ttgov21old.h
halfile = ttgov21new.h
;halfile = ttgofox.h
;halfile = ttgobeam.h
;halfile = ttgobeam10.h
;halfile = ttgotdisplay.h
;halfile = ttgotwristband.h
;halfile = fipy.h
;halfile = lopy.h
;halfile = lopy4.h
;halfile = lolin32litelora.h
;halfile = lolin32lora.h
;halfile = lolin32lite.h
;halfile = wemos32oled.h
;halfile = wemos32matrix.h
;halfile = octopus32.h
;halfile = tinypico.h
;halfile = tinypicomatrix.h
;halfile = m5core.h
;halfile = m5fire.h
;halfile = olimexpoeiso.h

[platformio]
; upload firmware to board with usb cable
default_envs = usb
; upload firmware to a paxexpress repository
;default_envs = ota
; use upstream version of arduino-espressif32 framework
;default_envs = dev
description = Paxcounter is a device for metering passenger flows in realtime. It counts how many mobile devices are around.

[common]
; for release_version use max. 10 chars total, use any decimal format like "a.b.c"
release_version = 3.6.0
; DEBUG LEVEL: For production run set to 0, otherwise device will leak RAM while running!
; 0=None, 1=Error, 2=Warn, 3=Info, 4=Debug, 5=Verbose
debug_level = 3
extra_scripts = pre:src/build.py
otakeyfile = ota.conf
lorakeyfile = loraconf.h
lmicconfigfile = lmic_config.h
platform_espressif32 = espressif32@6.3.1
monitor_speed = 115200
upload_speed = 115200 ; set by build.py and taken from hal file
lib_deps_lora =
    mcci-catena/MCCI LoRaWAN LMIC library @ ^4.1.1
lib_deps_display =
    bitbank2/OneBitDisplay @ ^2.3.1
    bitbank2/bb_spi_lcd @ ^2.4.1
    ricmoo/QRCode @ ^0.0.1
lib_deps_ledmatrix =
    seeed-studio/Ultrathin_LED_Matrix @ ^1.0.0
lib_deps_rgbled =
    fastled/FastLED @ ^3.6.0
lib_deps_gps =
    mikalhart/TinyGPSPlus @ ^1.0.3
lib_deps_sensors =
    adafruit/Adafruit Unified Sensor @ ^1.1.9
    adafruit/Adafruit BME280 Library @ ^2.2.2
    adafruit/Adafruit BMP085 Library @ ^1.2.2
    boschsensortec/BSEC Software Library @ 1.8.1492
    lewapek/Nova Fitness Sds dust sensors library @ ^1.5.1
lib_deps_basic =
    greyrook/libpax @ ^1.1.0
    https://github.com/SukkoPera/Arduino-Rokkit-Hash.git
    bblanchon/ArduinoJson @ ^6.21.2
    makuna/RTC @ 2.3.7
    mathertel/OneButton @ ^2.0.3
    lewisxhe/XPowersLib @ ^0.1.7
    256dpi/MQTT @ ^2.5.1
lib_deps_all =
    ${common.lib_deps_basic}
    ${common.lib_deps_lora}
    ${common.lib_deps_display}
    ${common.lib_deps_rgbled}
    ${common.lib_deps_gps}
    ${common.lib_deps_sensors}
    ${common.lib_deps_ledmatrix}
build_flags_all =
    -include "src/paxcounter.conf"
    '-D CORE_DEBUG_LEVEL=${common.debug_level}'
    '-D LOG_LOCAL_LEVEL=${common.debug_level}'
    '-D PROGVERSION="${common.release_version}"'
    '-D LIBPAX_WIFI'
    '-D LIBPAX_BLE'
    '-D LIBPAX_ARDUINO'
    '-D USE_ESP_IDF_LOG'
    '-D TAG=__FILE__'
    '-U BOARD_HAS_PSRAM'

[env]
framework = arduino
board = esp32dev
board_build.partitions = min_spiffs.csv
build_type = release
upload_speed = ${common.upload_speed}
;upload_port = COM12
platform = ${common.platform_espressif32}
lib_deps = ${common.lib_deps_all}
build_flags =
    -include "src/hal/${board.halfile}"
    ${common.build_flags_all}
extra_scripts = ${common.extra_scripts}
monitor_speed = ${common.monitor_speed}
monitor_filters = time, esp32_exception_decoder, default

[env:ota]
upload_protocol = custom

[env:usb]
upload_protocol = esptool
upload_speed = 921600
monitor_speed = 115200
; necessary for macos - adjust devicename accordingly
;upload_port = /dev/tty.usbserial-xxxxxxx
;monitor_port = /dev/tty.usbserial-xxxxxxx

[env:dev]
upload_protocol = esptool
platform = https://github.com/platformio/platform-espressif32.git#develop
platform_packages = framework-arduinoespressif32 @ https://github.com/espressif/arduino-esp32.git

[env:ci]
build_flags =
    -include "src/hal/${sysenv.CI_HALFILE}" ; set by CI
    ${common.build_flags_all}
upload_protocol = esptool