ESP32-PaxCounter/src/display.cpp

#ifdef HAS_DISPLAY

/*

Display-Mask (128 x 64 pixel):

 |        |       |
 |          11111111112
 |012345678901234567890   Font
-----------------------   ---------
0|PAX:aabbccdd      	    STRETCHED
1|PAX:aabbccdd            STRETCHED
2|
3|B:a.bcV Sats:ab ch:ab   SMALL
4|WIFI:abcde BLTH:abcde   SMALL
5|RLIM:abcd  Mem:abcdKB   SMALL
6|27.Feb 2019 20:27:00*   SMALL
7|yyyyyyyyyyyyy xx SFab   SMALL

* = char {L|G|R|?} indicates time source,
    inverse = clock controller is active,
    pulsed = pps input signal is active

y = LMIC event message
xx = payload sendqueue length
ab = LMIC spread factor

MY_FONT_SMALL:     6x8px = 21 chars / line
MY_FONT_NORMAL:    8x8px = 16 chars / line
MY_FONT_STRETCHED: 16x32px = 8 chars / line

*/

// Basic Config
#include <esp_spi_flash.h> // needed for reading ESP32 chip attributes
#include "globals.h"
#include "display.h"

// local Tag for logging
static const char TAG[] = __FILE__;

// helper array for converting month values to text
const char *printmonth[] = {"xxx", "Jan", "Feb", "Mar", "Apr", "May", "Jun",
                            "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"};
uint8_t DisplayIsOn = 0;
uint8_t displaybuf[MY_DISPLAY_WIDTH * MY_DISPLAY_HEIGHT / 8] = {0};
static uint8_t plotbuf[MY_DISPLAY_WIDTH * MY_DISPLAY_HEIGHT / 8] = {0};

QRCode qrcode;

#if (HAS_DISPLAY) == 1
SSOLED ssoled;
#elif (HAS_DISPLAY) == 2
TFT_eSPI tft = TFT_eSPI();
#endif

void dp_setup(int contrast) {

#if (HAS_DISPLAY) == 1 // I2C OLED
  int rc = oledInit(&ssoled, OLED_TYPE, OLED_ADDR, MY_DISPLAY_FLIP,
                    MY_DISPLAY_INVERT, USE_HW_I2C, MY_DISPLAY_SDA,
                    MY_DISPLAY_SCL, MY_DISPLAY_RST,
                    OLED_FREQUENCY); // use standard I2C bus at 400Khz
  assert(rc != OLED_NOT_FOUND);

  // set display buffer
  oledSetBackBuffer(&ssoled, displaybuf);

#elif (HAS_DISPLAY) == 2 // SPI TFT

  tft.init();

  tft.setRotation(MY_DISPLAY_FLIP ? true : false);
  tft.invertDisplay(MY_DISPLAY_INVERT ? true : false);
  tft.setTextColor(MY_DISPLAY_FGCOLOR, MY_DISPLAY_BGCOLOR);

#endif

  // clear display
  dp_clear();
  if (contrast)
    dp_contrast(contrast);
}

void dp_init(bool verbose) {

#if (HAS_DISPLAY) == 1 // i2c
  // block i2c bus access
  if (!I2C_MUTEX_LOCK())
    ESP_LOGV(TAG, "[%0.3f] i2c mutex lock failed", millis() / 1000.0);
  else {
#endif

    dp_setup(DISPLAYCONTRAST);

    if (verbose) {

      // show startup screen
      // to come -> display .bmp file with logo

// show chip information
#if (VERBOSE)
      esp_chip_info_t chip_info;
      esp_chip_info(&chip_info);
      dp_printf(0, 0, 0, 0, "** PAXCOUNTER **");
      dp_printf(0, 1, 0, 0, "Software v%s", PROGVERSION);
      dp_printf(0, 3, 0, 0, "ESP32 %d cores", chip_info.cores);
      dp_printf(0, 4, 0, 0, "Chip Rev.%d", chip_info.revision);
      dp_printf(0, 5, 0, 0, "WiFi%s%s",
                (chip_info.features & CHIP_FEATURE_BT) ? "/BT" : "",
                (chip_info.features & CHIP_FEATURE_BLE) ? "/BLE" : "");
      dp_printf(0, 6, 0, 0, "%dMB %s Flash",
                spi_flash_get_chip_size() / (1024 * 1024),
                (chip_info.features & CHIP_FEATURE_EMB_FLASH) ? "int."
                                                              : "ext.");

      // give user some time to read or take picture
      dp_dump(displaybuf);
      delay(2000);
      dp_clear();
#endif // VERBOSE

#if (HAS_LORA)
      // generate DEVEUI as QR code and text
      uint8_t buf[8], *p = buf;
      char deveui[17];
      os_getDevEui((u1_t *)buf);
      snprintf(deveui, 17, "%016llX", (*(uint64_t *)(p)));

      // display DEVEUI as QR code on the left
      dp_contrast(30);
      dp_printqr(3, 3, deveui);

      // display DEVEUI as plain text on the right
      dp_printf(72, 0, MY_FONT_NORMAL, 0, "LORAWAN");
      dp_printf(72, 1, MY_FONT_NORMAL, 0, "DEVEUI:");
      for (uint8_t i = 0; i <= 3; i++)
        dp_printf(80, i + 3, MY_FONT_NORMAL, 0, "%4.4s", deveui + i * 4);

      // give user some time to read or take picture
      dp_dump(displaybuf);
      delay(8000);
      dp_contrast(DISPLAYCONTRAST);
      dp_clear();
#endif // HAS_LORA

    } // verbose

    dp_power(cfg.screenon); // set display off if disabled

#if (HAS_DISPLAY) == 1  // i2c
    I2C_MUTEX_UNLOCK(); // release i2c bus access
  }                     // mutex
#endif

} // dp_init

void dp_refresh(bool nextPage) {

#ifndef HAS_BUTTON
  static uint32_t framecounter = 0;
#endif

  // update histogram
  dp_plotCurve(macs.size(), false);

  // if display is switched off we don't refresh it to relax cpu
  if (!DisplayIsOn && (DisplayIsOn == cfg.screenon))
    return;

  const time_t t =
      myTZ.toLocal(now()); // note: call now() here *before* locking mutex!

  // block i2c bus access
  if (!I2C_MUTEX_LOCK())
    ESP_LOGV(TAG, "[%0.3f] i2c mutex lock failed", millis() / 1000.0);
  else {
    // set display on/off according to current device configuration
    if (DisplayIsOn != cfg.screenon) {
      DisplayIsOn = cfg.screenon;
      dp_power(cfg.screenon);
    }

#ifndef HAS_BUTTON
    // auto flip page if we are in unattended mode
    if ((++framecounter) > (DISPLAYCYCLE * 1000 / DISPLAYREFRESH_MS)) {
      framecounter = 0;
      nextPage = true;
    }
#endif

    dp_drawPage(t, nextPage);
    dp_dump(displaybuf);

    I2C_MUTEX_UNLOCK(); // release i2c bus access

  } // mutex
} // refreshDisplay()

void dp_drawPage(time_t t, bool nextpage) {

  // write display content to display buffer
  // nextpage = true -> flip 1 page

  static uint8_t DisplayPage = 0;
  char timeState;
#if (HAS_GPS)
  static bool wasnofix = true;
#endif

  // line 1/2: pax counter
  dp_printf(0, 0, MY_FONT_STRETCHED, 0, "PAX:%-4d",
            macs.size()); // display number of unique macs total Wifi + BLE

start:

  if (nextpage) {
    DisplayPage = (DisplayPage >= DISPLAY_PAGES - 1) ? 0 : (DisplayPage + 1);
    dp_clear();
  }

  switch (DisplayPage) {

    // page 0: parameters overview
    // page 1: pax graph
    // page 2: GPS
    // page 3: BME280/680
    // page 4: time
    // page 5: lorawan parameters
    // page 6: blank screen

    // page 0: parameters overview
  case 0:

    // line 3: wifi + bluetooth counters
#if ((WIFICOUNTER) && (BLECOUNTER))
    if (cfg.wifiscan)
      dp_printf(0, 3, MY_FONT_SMALL, 0, "WIFI:%-5d", macs_wifi);
    else
      dp_printf(0, 3, MY_FONT_SMALL, 0, "%s", "WIFI:off");
    if (cfg.blescan)
      dp_printf(66, 3, MY_FONT_SMALL, 0, "BLTH:%-5d", macs_ble);
    else
      dp_printf(66, 3, MY_FONT_SMALL, 0, "%s", "BLTH:off");
#elif ((WIFICOUNTER) && (!BLECOUNTER))
    if (cfg.wifiscan)
      dp_printf(0, 3, MY_FONT_SMALL, 0, "WIFI:%-5d", macs_wifi);
    else
      dp_printf(0, 3, MY_FONT_SMALL, 0, "%s", "WIFI:off");
#elif ((!WIFICOUNTER) && (BLECOUNTER))
    if (cfg.blescan)
      dp_printf(0, 3, MY_FONT_SMALL, 0, "BLTH:%-5d", macs_ble);
    else
      dp_printf(0, 3, MY_FONT_SMALL, 0, "%s", "BLTH:off");
#else
    dp_printf(0, 3, MY_FONT_SMALL, 0, "%s", "Sniffer disabled");
#endif

// line 4: Battery + GPS status + Wifi channel
#if (defined BAT_MEASURE_ADC || defined HAS_PMU)
    if (batt_voltage == 0xffff)
      dp_printf(0, 4, MY_FONT_SMALL, 0, "%s", "USB    ");
    else if (batt_voltage == 0)
      dp_printf(0, 4, MY_FONT_SMALL, 0, "%s", "No batt");
    else
      dp_printf(0, 4, MY_FONT_SMALL, 0, "B:%.2fV", batt_voltage / 1000.0);
#endif
#if (HAS_GPS)
    if (gps_hasfix())
      dp_printf(48, 4, MY_FONT_SMALL, 0, "Sats:%.2d", gps.satellites.value());
    else // if no fix then display Sats value inverse
      dp_printf(48, 4, MY_FONT_SMALL, 1, "Sats:%.2d", gps.satellites.value());
#endif
    dp_printf(96, 4, MY_FONT_SMALL, 0, "ch:%02d", channel);

    // line 5: RSSI limiter + free memory
    dp_printf(0, 5, MY_FONT_SMALL, 0,
              !cfg.rssilimit ? "RLIM:off " : "RLIM:%-4d", cfg.rssilimit);
    dp_printf(66, 5, MY_FONT_SMALL, 0, "Mem:%4dKB", getFreeRAM() / 1024);

    // line 6: time + date
#if (TIME_SYNC_INTERVAL)
    timeState = TimePulseTick ? ' ' : timeSetSymbols[timeSource];
    TimePulseTick = false;

    dp_printf(0, 6, MY_FONT_SMALL, 0, "%02d.%3s %4d", day(t),
              printmonth[month(t)], year(t));
    dp_printf(72, 6, MY_FONT_SMALL, 0, "%02d:%02d:%02d", hour(t), minute(t),
              second(t));

// display inverse timeState if clock controller is enabled
#if (defined HAS_DCF77) || (defined HAS_IF482)
    dp_printf(120, 6, MY_FONT_SMALL, 1, "%c", timeState);
#else
    dp_printf(120, 6, MY_FONT_SMALL, 0, "%c", timeState);
#endif

#endif // TIME_SYNC_INTERVAL

    // line 7: LORA network status
#if (HAS_LORA)
    // LMiC event display
    dp_printf(0, 7, MY_FONT_SMALL, 0, "%-16s", lmic_event_msg);
    // LORA datarate, display inverse if ADR disabled
    dp_printf(102, 7, MY_FONT_SMALL, !cfg.adrmode, "%-4s",
              getSfName(updr2rps(LMIC.datarate)));
#endif     // HAS_LORA
    break; // page0

    // page 1: pax graph
  case 1:
    dp_dump(plotbuf);
    break; // page1

    // page 2: GPS
  case 2:
#if (HAS_GPS)
    if (gps_hasfix()) {
      // line 5: clear "No fix"
      if (wasnofix) {
        dp_printf(16, 5, MY_FONT_STRETCHED, 0, "      ");
        wasnofix = false;
      }
      // line 3-4: GPS latitude
      dp_printf(0, 3, MY_FONT_STRETCHED, 0, "%c%07.4f",
                gps.location.rawLat().negative ? 'S' : 'N', gps.location.lat());

      // line 6-7: GPS longitude
      dp_printf(0, 6, MY_FONT_STRETCHED, 0, "%c%07.4f",
                gps.location.rawLat().negative ? 'W' : 'E', gps.location.lng());

    } else {
      dp_printf(16, 5, MY_FONT_STRETCHED, 1, "No fix");
      wasnofix = true;
    }
    break; // page2
#else
    DisplayPage++; // next page
#endif

    // page 3: BME280/680
  case 3:
#if (HAS_BME)
    // line 2-3: Temp
    dp_printf(0, 2, MY_FONT_STRETCHED, 0, "TMP:%-2.1f", bme_status.temperature);

    // line 4-5: Hum
    dp_printf(0, 4, MY_FONT_STRETCHED, 0, "HUM:%-2.1f", bme_status.humidity);

#ifdef HAS_BME680
    // line 6-7: IAQ
    dp_printf(0, 6, MY_FONT_STRETCHED, 0, "IAQ:%-3.0f", bme_status.iaq);
#else      // is BME280 or BMP180
    // line 6-7: Pre
    dp_printf(0, 6, MY_FONT_STRETCHED, 0, "PRE:%-2.1f", bme_status.pressure);
#endif     // HAS_BME680
    break; // page 3
#else
    DisplayPage++; // next page
#endif // HAS_BME

  // page 4: time
  case 4:
    dp_printf(0, 4, MY_FONT_LARGE, 0, "%02d:%02d:%02d", hour(t), minute(t),
              second(t));
    break;

  // page 5: lorawan parameters
  case 5:

#if (HAS_LORA)
    // 3|NtwkID:000000 TXpw:aa
    // 4|DevAdd:00000000  DR:0
    // 5|CHMsk:0000 Nonce:0000
    // 6|CUp:000000 CDn:000000
    // 7|SNR:-0000  RSSI:-0000
    dp_printf(0, 3, MY_FONT_SMALL, 0, "NetwID:%06X TXpw:%-2d",
              LMIC.netid & 0x001FFFFF, LMIC.radio_txpow);
    dp_printf(0, 4, MY_FONT_SMALL, 0, "DevAdd:%08X DR:%1d", LMIC.devaddr,
              LMIC.datarate);
    dp_printf(0, 5, MY_FONT_SMALL, 0, "ChMsk:%04X Nonce:%04X", LMIC.channelMap,
              LMIC.devNonce);
    dp_printf(0, 6, MY_FONT_SMALL, 0, "fUp:%-6d fDn:%-6d",
              LMIC.seqnoUp ? LMIC.seqnoUp - 1 : 0,
              LMIC.seqnoDn ? LMIC.seqnoDn - 1 : 0);
    dp_printf(0, 7, MY_FONT_SMALL, 0, "SNR:%-5d  RSSI:%-5d", (LMIC.snr + 2) / 4,
              LMIC.rssi);
    break; // page5
#else      // don't show blank page if we are unattended
    DisplayPage++; // next page
#endif     // HAS_LORA

    // page 6: blank screen
  case 6:
#ifdef HAS_BUTTON
    dp_clear();
    break;
#else // don't show blank page if we are unattended
    DisplayPage++; // next page
#endif

  default:
    goto start; // start over

  } // switch

} // dp_drawPage

// display helper functions
void dp_printf(uint16_t x, uint16_t y, uint8_t font, uint8_t inv,
               const char *format, ...) {
  char loc_buf[64];
  char *temp = loc_buf;
  va_list arg;
  va_list copy;
  va_start(arg, format);
  va_copy(copy, arg);
  int len = vsnprintf(temp, sizeof(loc_buf), format, copy);
  va_end(copy);
  if (len < 0) {
    va_end(arg);
    return;
  };
  if (len >= sizeof(loc_buf)) {
    temp = (char *)malloc(len + 1);
    if (temp == NULL) {
      va_end(arg);
      return;
    }
    len = vsnprintf(temp, len + 1, format, arg);
  }
  va_end(arg);
#if (HAS_DISPLAY) == 1
  oledWriteString(&ssoled, 0, x, y, temp, font, inv, false);
#elif (HAS_DISPLAY) == 2
  uint8_t myfont;
  switch (font) {
  case MY_FONT_SMALL:
    myfont = 6;
    break;
  case MY_FONT_NORMAL:
  case MY_FONT_LARGE:
    myfont = 8;
    break;
  case MY_FONT_STRETCHED:
    myfont = 16;
    break;
  default:
    myfont = 8;
  }
  tft.drawString(temp, x * tft.textWidth("_", font) / myfont,
                 y * tft.fontHeight(font), font);

#endif
  if (temp != loc_buf) {
    free(temp);
  }
}

void dp_dump(uint8_t *pBuffer) {
#if (HAS_DISPLAY) == 1
  oledDumpBuffer(&ssoled, pBuffer);
#elif (HAS_DISPLAY) == 2
  // no buffered rendering for TFT
#endif
}

void dp_clear() {
#if (HAS_DISPLAY) == 1
  oledFill(&ssoled, 0, 1);
#elif (HAS_DISPLAY) == 2
  tft.fillScreen(MY_DISPLAY_BGCOLOR);
#endif
}

void dp_contrast(uint8_t contrast) {
#if (HAS_DISPLAY) == 1
  oledSetContrast(&ssoled, contrast);
#elif (HAS_DISPLAY) == 2
  // no contrast setting for TFT
#endif
}

void dp_power(uint8_t screenon) {
#if (HAS_DISPLAY) == 1
  oledPower(&ssoled, screenon);
#elif (HAS_DISPLAY) == 2
  // to come
#endif
}

void dp_shutdown(void) {
#if (HAS_DISPLAY) == 1
  // block i2c bus access
  if (!I2C_MUTEX_LOCK())
    ESP_LOGV(TAG, "[%0.3f] i2c mutex lock failed", millis() / 1000.0);
  else {
    cfg.screenon = 0;
    oledPower(&ssoled, false);
    delay(DISPLAYREFRESH_MS / 1000 * 1.1);
    I2C_MUTEX_UNLOCK(); // release i2c bus access
  }
#elif (HAS_DISPLAY) == 2
  // to come
#endif
}

void dp_printqr(uint16_t offset_x, uint16_t offset_y, const char *Message) {
  uint8_t qrcodeData[qrcode_getBufferSize(QR_VERSION)];
  qrcode_initText(&qrcode, qrcodeData, QR_VERSION, ECC_HIGH, Message);

  // draw QR code
  for (uint16_t y = 0; y < qrcode.size; y++)
    for (uint16_t x = 0; x < qrcode.size; x++)
      if (!qrcode_getModule(&qrcode, x, y)) // "black"
        dp_fillRect(x * QR_SCALEFACTOR + offset_x,
                    y * QR_SCALEFACTOR + offset_y, QR_SCALEFACTOR,
                    QR_SCALEFACTOR, false);
  // draw horizontal frame lines
  dp_fillRect(0, 0, qrcode.size * QR_SCALEFACTOR + 2 * offset_x, offset_y,
              false);
  dp_fillRect(0, qrcode.size * QR_SCALEFACTOR + offset_y,
              qrcode.size * QR_SCALEFACTOR + 2 * offset_x, offset_y, false);
  // draw vertical frame lines
  dp_fillRect(0, 0, offset_x, qrcode.size * QR_SCALEFACTOR + 2 * offset_y,
              false);
  dp_fillRect(qrcode.size * QR_SCALEFACTOR + offset_x, 0, offset_x,
              qrcode.size * QR_SCALEFACTOR + 2 * offset_y, false);
}

void dp_fillRect(uint16_t x, uint16_t y, uint16_t width, uint16_t height,
                 uint8_t bRender) {
#if (HAS_DISPLAY) == 1
  for (uint16_t xi = x; xi < x + width; xi++)
    oledDrawLine(&ssoled, xi, y, xi, y + height - 1, bRender);
#elif (HAS_DISPLAY) == 2
  tft.drawRect(x, y, width, height, MY_DISPLAY_FGCOLOR);
#endif
}

int dp_drawPixel(uint8_t *buf, const uint16_t x, const uint16_t y,
                 const uint8_t dot) {

  if (x > MY_DISPLAY_WIDTH || y > MY_DISPLAY_HEIGHT)
    return -1;

  uint8_t bit = y & 7;
  uint16_t idx = y / 8 * MY_DISPLAY_WIDTH + x;

  buf[idx] &= ~(1 << bit); // clear pixel
  if (dot)
    buf[idx] |= (1 << bit); // set pixel

  return 0;
}

void dp_scrollHorizontal(uint8_t *buf, const uint16_t width,
                         const uint16_t height, bool left) {

  uint16_t col, page, idx = 0;

  for (page = 0; page < height / 8; page++) {
    if (left) { // scroll left
      for (col = 0; col < width - 1; col++) {
        idx = page * width + col;
        buf[idx] = buf[idx + 1];
      }
      buf[idx + 1] = 0;
    } else // scroll right
    {
      for (col = width - 1; col > 0; col--) {
        idx = page * width + col;
        buf[idx] = buf[idx - 1];
      }
      buf[idx - 1] = 0;
    }
  }
}

void dp_scrollVertical(uint8_t *buf, const uint16_t width,
                       const uint16_t height, int offset) {

  uint64_t buf_col;

  if (!offset)
    return; // nothing to do

  for (uint16_t col = 0; col < MY_DISPLAY_WIDTH; col++) {
    // convert column bytes from display buffer to uint64_t
    buf_col = *(uint64_t *)&buf[col * MY_DISPLAY_HEIGHT / 8];

    if (offset > 0) // scroll down
      buf_col <<= offset;
    else // scroll up
      buf_col >>= abs(offset);

    // write back uint64_t to uint8_t display buffer
    *(uint64_t *)&buf[col * MY_DISPLAY_HEIGHT / 8] = buf_col;
  }
}

void dp_plotCurve(uint16_t count, bool reset) {

  static uint16_t last_count = 0, col = 0, row = 0;
  uint16_t v_scroll = 0;

  if ((last_count == count) && !reset)
    return;

  if (reset) {                      // next count cycle?
    if (col < MY_DISPLAY_WIDTH - 1) // matrix not full -> increment column
      col++;
    else // matrix full -> scroll left 1 dot
      dp_scrollHorizontal(plotbuf, MY_DISPLAY_WIDTH, MY_DISPLAY_HEIGHT, true);

  } else // clear current dot
    dp_drawPixel(plotbuf, col, row, 0);

  // scroll down, if necessary
  while ((count - v_scroll) > MY_DISPLAY_HEIGHT - 1)
    v_scroll++;
  if (v_scroll)
    dp_scrollVertical(plotbuf, MY_DISPLAY_WIDTH, MY_DISPLAY_HEIGHT, v_scroll);

  // set new dot
  // row = MY_DISPLAY_HEIGHT - 1 - (count - v_scroll) % MY_DISPLAY_HEIGHT;
  row = MY_DISPLAY_HEIGHT - 1 - count - v_scroll;
  last_count = count;
  dp_drawPixel(plotbuf, col, row, 1);
}

#endif // HAS_DISPLAY